OSP Miniature Modular Blind Mate Connectors - Farnell

1y ago
110 Views
2 Downloads
602.66 KB
19 Pages
Last View : 7m ago
Last Download : 2m ago
Upload by : Cannon Runnels
Transcription

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors Product Facts Interface designed for multiple interconnects For high performance microwave system requirements Module to module, module to motherboard, fixed and float mount Bulkhead or panel mount For flexible and semi-rigid cable OSP miniature connectors for semi-rigid cable meet high performance requirements for microwave multiple interconnects. Standard units are available in bulkhead or panel mount designs for either direct solder or solderless compression crimp attachment. Complete tooling for both versions is located in the Tooling Section of this catalog. Jack connectors are available in either float or rigid mount. Rigid mount units will function to specifications up to .10 [.004] radial misalignment with the mating plug connector. Applications requiring greater than .10 [.004 ] radial misalignment can use either the float design or floating connector plates with guide pins. high performance requirements for microwave system applications. The cable attachment is permanent and highly reliable. Ease of assembly permits users unskilled in soldering techniques to rapidly produce cable assemblies with consistently excellent mechanical and electrical performance. The solderless compression crimp attachment meets 157 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) The specifications given refer specifically to mated pair of Part Numbers 1059410-1 and 1059402-1 (RG 402) and 1059412-1 and 1059404-1 (RG 405). Specifications on other connectors are available on request. The general electrical, mechanical and environmental specifications in the following table are recommended for procurement documents or drawings. Engineering Data Impedance — Frequency — Temperature Rating — 50 ohms dc to 22.0 GHz -65 to 125 C Electrical RG 402 (.141) Semi-Rigid RG 405 (.085) Semi-Rigid 1.02 .005f (GHz) 1.02 .008f (GHz) -.03 x f (GHz) 5,000 megohms min. 1.05 .005f (GHz) 1.05 .009f (GHz) -.03 x f (GHz) 5,000 megohms min. VSWR — dc - 18.0 GHz 18.0 - 22.0 GHz RF Transmission Loss — Insulation Resistance — Contact Resistance — Center Contact Outer Contact Outer Contact to Cable Dielectric Withstanding Voltage — Corona Extinction Voltage at 70,000 Ft.— RF High Potential at 5 MHz — RF Leakage Interface Only — Power Handling — 2.0 milliohms max. 2.0 milliohms max. 2.0 milliohms max. 2.0 milliohms max. 0.5 milliohms max. 0.5 milliohms max. 1500 volts RMS 1000 volts RMS 375 volts min. 335 volts min. 1,000 volts RMS 670 volts RMS -(90-fGHz) dB min. (fully mated) -(90-fGHz) dB min. (fully mated) 300W at 3 GHz (sea level) and room temperature Environmental Corrosion — Vibration — Shock — Temperature Cycling — Moisture Resistance — Method 101, Condition B, MIL-STD-202 Method 204, Condition D, 20G’s, MIL-STD-202 Method 213, Condition I, 100G’s, MIL-STD-202 Method 107, Condition B, MIL-STD-202 Method 106, MIL-STD-202 Material Housing — Center Contact — Dielectric — Gasket (O’Ring) — Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582 Beryllium copper per ASTM-B-196 TFE fluorocarbon per ASTM-D-1457 MIL-P-25732 Mechanical Force to Engage — Force to Disengage — Center Contact Retention — Durablilty — Radial Misalignment — Rigid Mount Float Mount 3 pounds max. 1.5 pounds max. 6 pounds min. 5,000 Cycles .10 [ . 004] .51 [ .020] Mating Characteristics Jack Connector — Center Contact Socket Insertion Force Withdrawal Force Oversize test Pin — Test Pin Finish — Insertion Depth — Number of Insertions — Test Pin — Test Pin Finish — Insertion Depth — Insertion Force — Test Pin — Test Pin Finish — Insertion Depth — Withdrawal — .945 .003 [.0372 .0001] dia. 16 micro inch .76/1.14 [.030/.045] 3 .940 .003 [.0370 .0001] dia. 16 micro inch 1.27/1.91 [.050/.075] 3 pounds max. .90 .003 [.0355 - .0001] dia. 16 micro inch 1.27/1.91 [.050/.075] 1 ounce min. Finish Center Contact — Housing — Gold plate per MIL-G-45204, Type II, Class 1 over copper plate per MIL-C-14550 Gold plate per MIL-G-45204, Typ II, Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 All dimensions shown are nominal. Contact the factory for specific tolerances. 158 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Interface Mating Dimensions The connector interface, specifically designed for multiple interconnects, maintains reliable performance over the typical mechanical tolerance required in cost effective packaging. The interface test data shows excellent performance is maintained with mating gaps up to 0.38 [.015]. Meets MIL-STD-348 Figure 321. Intermateable to BMA Connectors. Jack Letter A B C D E F Dimensions 1.78 .070 Nom. 5.72 .225 Min. 7.62 Ref. .300 5.00 Nom.* .197 5.08 .200 Max. 3.23 Max.* .127 Plug Letter A B C D E F Dimensions 1.78 .070 Nom. 5.33 .210 Nom. 7.62 Ref. .300 5.05 Min. .199 0.91 .036 Nom. 3.25 Min. .128 *With spring bottomed 159 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Direct Solder Attachment Bulkhead Feedthrough Cable Plug Rear Mount 7.9 Hex. A [.312] Dia. 6.1 0.03 Dia. [.240 .001] 17.5 [.690] ed Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 Bulkhead Feedthrough Cable Jack Rigid Rear Mount 9.19 Max. [.362] B Dia. 6.1 0.03 – .000 Dia. [.242 .001] – .000 Recommended Mounting Hole Dimensions A B Plating Part No. Gold 3.7 .144 4.6 .180 1059402-1 Gold 2.3 .089 3.0 .120 1059404-1 6.4 A Dia. Dia. [.250] 11 [.43 11.1 Hex. [.437] 18.0 [.710] ed ole Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 9.19 Max. [.362] B Dia. 9.1 0.03 – .000 Dia. [.359 .001] – .000 Recommended Mounting Hole Dimensions A B Plating Part No. Gold 3.7 .144 4.6 .180 1059410-1 Gold 2.3 .089 3.0 .120 1059412-1 Flange Mount Cable Jack Floating Rear Mount 0.10 2.6 – 0.03 Dia. .004 2 Holes [.102 – .001 ] 14.2 0.10 [.560 .004] B Dia. 14.2 [.560] OSP Jack A Dia. Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 19.1 Dia. [.750] 0.25 9.5 – 0.00 .010 [.375 – .000 ] 18.0 [.710] 9.6 0.05 – 0.03 Dia. [.377 .002] – .001 9.5 [.372] 7.1 [.280] Recommended Mounting Hole Dimensions Part No. A B 3.7 .144 4.6 .180 1059453-1 2.3 .089 3.0 .120 1059456-1 Finish: Inner housing that is soldered to cable is gold plated. Outer housing is passivated stainless steel. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 160 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Direct Solder Attachment (Continued) Low Profile — Bulkhead Feedthrough Cable Jack — Floating Rear Mount A 11.2 Dia. Dia. [.440] Max. 9.3 0.03 Dia. [.365 .001] 16.2 [.640] Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 9.4 0.05 – 0.03 Dia. [.368 .002] B Dia. – .001 Recommended Mounting Hole Dimensions A B Plating Part No. Gold 3.7 .144 4.6 .180 1059505-1 Gold 2.3 .089 3.0 .120 1059506-1 When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Low Profile — Panel Feedthrough Cable Jack — Floating Rear Mount 7.6 Dia. [.300] A Dia. 18.0 [.710] Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 B Dia. Dimensions A B Plating Part No. Gold 3.7 .144 4.6 .180 1059465-1 Gold 2.3 .089 3.0 .120 1059467-1 Recommended removal tool part number 1059774-1 is described in the Tooling Section of this catalog. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Stand-Off C Panel A Panel B 8.6 0.08 – 0.00 [.340 .003] 8.0 0.05 – 0.00 [.316 .002] – .000 – .000 Panel B 1.3 0.00 – 0.13 [.050 .000] – .005 Panel A .003 2.3 .090 2.3 .090 2.3 .090 3.2 .125 3.2 .125 3.2 .125 Panel B .003 9.5 .375 11.1 .438 12.7 .500 9.5 .375 11.1 .438 12.7 .500 Stand-Off Panel C .050/–.000 7.2 .285 5.6 .222 4.1 .160 6.4 .250 4.7 .187 3.2 .125 Recommended Mounting Detail Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 161 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Solderless Compression Crimp Attachment Bulkhead Feedthrough Cable Plug Fixed Rear Mount 7.9 A Hex. Dia. [.312] 6.1 0.03 Dia. [.240 .001] d 6.1 0.03 – .000 Dia. [.242 .001] 9.19 Max. [.362] 5.5 Dia. [.218] B – .000 Recommended Mounting Hole Dim. B Cable Plating Dim. A Before Crimping After Crimping Part No. RG 405/U 2.16 .085 Passivated Stainless Steel 2.2 .088 19.8 .782 17.2 .677 1059399-1 Outline drawing shows after crimp dimensions. A 6.4 Dia. [.250] Dia. Bulkhead Feedthrough Cable Jack Fixed Rear Mount 11 [.43 11.1 Hex. [.437] 5.5 Dia. [.218] B 9.1 0.03 – .000 Dia. [.359 .001] 12.7 Max. [.500] – .000 d Recommended Mounting Hole Dim. B Cable Plating Dim. A Before Crimping After Crimping Part No. RG 402/U 3.58 .141 Passivated Stainless Steel 3.6 .143 21.1 .830 18.2 .715 1059408-1 Outline drawing shows after crimp dimensions. Flange Mount Cable Jack Floating Rear Mount 2.6 Dia. [.102] 2 Plcs. Dia. 9.5 Dia. [.372] 5.5 Dia. [.218] 19.1 Dia. [.750] 9.6 0.05 – 0.03 14.2 0.10 [.560 .004] [.377 .002] – .001 Dia. 9.5 [.372 14.2 [.560] B A Dia. 7.1 [.280] 9.7 [.380] Recommended Mounting Hole Dim. B Cable Plating Dim. A Before Crimping After Crimping Part No. RG 402/U 3.58 .141 RG 405/U 2.16 .085 Passivated Stainless Steel Passivated Stainless Steel 3.6 .143 22.6 .891 19.8 .780 1059451-1 2.2 .088 22.6 .891 19.8 .780 1059452-1 Outline drawing shows after crimp dimensions. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 162 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) For Flexible Cable, Crimp Attachment 6.9 0.03 Dia. [.240 .001] Bulkhead Feedthrough Cable Plug Rear Mount 11.4 [.447] ded Hole Cable RG 174/U, 179, 187, 188, 316 6.9 [.240 6.1 0.03 – .000 Dia. [.242 .001] 21.2 Ref. [.833] 11 [.44 – .000 Recommended Mounting Hole 34.9 Max. [1.375] Plating Part No. Passivated Stainless Steel 1059523-1 9.1 0.03 Dia. [.357 .001] Bulkhead Feedthrough Cable Jack Rigid Rear Mount 6.4 [.250] 9.1 0.03 – .000 Dia. [.359 .001] – .000 21.7 Ref. [.855] Recommended Mounting Hole 35.6 Max. [1.400] Cable RG 55/U, 142, 223, 400 Flange Mount Cable Jack Floating Rear Mount Plating Part No. Passivated Stainless Steel 1059525-1 2.6 Dia. [.102] 2 Plcs. Dia. 9.6 .051 – .025 Dia. [.377 .002] – .001 9.5 [.372] Dia. 14.2 [.560] 21.7 Ref. [.875] 19.1 [.750] Dia. 7.1 [.280] 9.5 [.375] Recommended Mounting Hole 35.6 Max. [1.400] Cable RG 55/U, 142, 223, 400 RG 174/U, 179, 187, 188, 316 RG 178, Double Braid Low Profile — Panel Feedthrough Cable Jack — Rear Mount 9.5 [.372 Dia 14.2 .102 [.560 .004] Plating Part No. Passivated Stainless Steel 1059540-1 Passivated Stainless Steel 1059541-1 Passivated Stainless Steel 1058572-1 7.6 [.300] Dia. 9.4 0.05 – 0.03 Dia. [.368 .002] – .001 22.3 Ref. [.878] 35.6 Max. [1.400] Cable RG 174/U, 179, 187, 188, 316 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. Recommended Mounting Hole Plating Part No. Passivated Stainless Steel 1059551-1 Refer to Recommended Mounting Hole Detail for Semi-Rigid Cable Low Profile Feedthrough Cable Jack. Recommended removal tool part number 1059774-1 as described in the Tooling Section of this catalog. 163 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Panel Mount Straight Terminal 2-Hole Flange Mount Plug Receptacle 6.4 Dia. [.250] 2.6 Dia. 12.2 [.102] [.481] 2 Plcs. 1.3 .050 Dia. 15.9 [.625] 1.7 [.065] 4.1 Dia. [.162] 9.9 [.390] 22.3 [.878] 2.6 Dia. [.102] 2 Plcs. 15.9 [.625] 1.3 Dia. [.050] 12.2 [.481] 4.1 Dia. [.162] 27.4 [1.080] 4-Hole Flange Mount Plug Receptacle Part No. 1059566-1 6.6 [.260] 8.4 [.330] 2-Hole Flange Mount Jack Receptacle Plating Passivated Stainless Steel Plating Passivated Stainless Steel Part No. 1059596-1 7.6 [.300] 2.6 Dia. [.102] 2 Plcs. 6.4 Dia. [.250] 1.3 Dia. [.050] Plating Passivated Stainless Steel 4.1 Dia. [.162] 22.3 [.878] 12.7 [.500] Sq. 4-Hole Flange Mount Jack Receptacle Part No. 1059563-1 8.6 [.340] Typ. 2.6 Dia. [.102] 2 Plcs. Plating Passivated Stainless Steel 1.3 Dia. [.050] 27.4 [1.080] 4.1 Dia. [.162] 12.7 [.500] Sq. Part No. 1059594-1 8.6 [.340] Typ. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 164 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Panel Mount (Continued) Straight Terminal Threaded Installation — Panel Feedthrough Plug Receptacle 1.6 Dia. [.064] 0.5 Dia. [.020] 1.7 0.03 Dia. [.066 .001] 5.5 0.03 Dia. [.218 .001] 5.3 Dia. 10.4 [.410] [.210] 5.3 0.05 [.210 .002] 6.4 Panel [.250] Plating Passivated Stainless Steel Part No. 1059617-1 Recommended Mounting Hole Threaded Installation — Panel Feedthrough Jack Receptacle 1.6 Dia. [.064] 5.5 0.03 Dia. [.218 .001] 5.3 Dia. 10.4 [.410] [.210] 5.3 0.05 [.210 .002] 0.5 Dia. [.020] 1.7 0.03 Dia. [.066 .001] 6.4 Panel [.250] Plating Passivated Stainless Steel Part No. 1059657-1 Recommended Mounting Hole Press Fit Installation — Panel Feedthrough Plug Receptacle 0.5 Dia. [.020] 7.6 Dia. [.300] 6.4 0.05 – .000 Dia. [.253 .002] – .000 7.92 Dia. [.312] 6.3 .000 [.248 – 0.05 Dia. .000] – .002 6.4 [.250] 1.2 0.03 Dia. [.046 .001] 6.4 0.03 Dia. [.250 .001] Plating Passivated Stainless Steel Part No. 1059651-1 Recommended Mounting Hole Press Fit Installation — Panel Feedthrough Jack Receptacle 0.5 Dia. [.020] 7.6 Dia. [.300] 6.4 0.05 – .000 Dia. [.253 .002] – .000 6.3 .000 6.4 – 0.05 Dia. [.250] [.248 .000] 1.2 0.03 Dia. [.046 .001] 6.4 0.03 Dia. [.250 .001] Plating Passivated Stainless Steel Part No. 1059654-1 – .002 Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 165 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Printed Circuit Board Mount Straight Plug Receptacle — Captured Contact 1.7 0.08 – .000 Dia. [.067 .003] Hole Typ. – .000 1.0 Sq. [.040] 4 Plcs. 1.3 Dia. [.050] 12.7 [.500] 5.1 [.200] Typ. 6.4 [.250] Sq. 5.1 [.200] Typ. Plating Gold Part No. 1059684-1 Plating Gold Part No. 1059681-1 Plating Gold Part No. 1059691-1 Plating Gold Part No. 1253111-1 Recommended Mounting Hole Straight Jack Receptacle — Captured Contact 1.7 0.08 – .000 Dia. [.067 .003] Hole Typ. 5.1 [.200] Typ. 9.5 [.375] Dia. 13.5 [.530] – .000 1.0 Sq. [.040] 4 Plcs. 1.3 Dia. [.050] 5.1 [.200] Typ. Recommended Mounting Hole Right-Angle Plug Receptacle — Captured Contact 13.5 [.530] 15.0 [.590] Surface Mount Vertical Plug with Small Leg O-Ring – .000 1.0 Sq. [.040] 4 Plcs. 1.3 Dia. [.050] 9.4 [.372] OSP Plug 1.7 0.08 – .000 Dia. [.067 .003] Hole Typ. 5.1 [.200] Typ. 6.4 [.250] Sq. Recommended Mounting Hole 1.7 0.08 – .000 Dia. [.067 .003] 1.6 Sq. [.062] 4 Plcs. 1.3 Dia. 6.4 [.050] [.250] Sq. 5.1 [.200] Typ. – .000 4.5 [.178] Typ. 2.5 0.08 Dia. Hole – .000 [.098 .003] Typ. – .000 4 Plcs. 4.5 [.178] Typ. Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 166 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Hermetically Sealed Metal-To-Metal Rigid Gasket Seal — Panel Feedthrough Plug Receptacle 0.5 Dia. [.020] 5.3 Dia. [.210] 10.4 [.410] VSWR (GHz) 1.04 .009f RF Leakage (dB) –(90-fGHz) Rigid Gasket 1.6 [.064] Dia. Plating Part No. Passivated stainless steel 6059632-1 Installation Thermal Limit: 250 C. Recommended Mounting Hole Detail A follows, pg 168. Rigid Gasket Seal — Panel Feedthrough Jack Receptacle 0.5 Dia. [.020] 11.2 [.450] VSWR (GHz) 1.04 .009f RF Leakage (dB) –(90-fGHz) 5.3 Dia. [.210] Rigid Gasket 1.6 [.064] Dia. Plating Part No. Passivated stainless steel 6059665-1 Installation Thermal Limit: 250 C. Recommended Mounting Hole Detail A follows, pg 168. Field Replaceable Solder and Braze-In Panel Feedthrough Plug Receptacle 5.3 Dia. [.210] 9.9 [.390] 4.0 0.05 – 0.03 Dia. [.158 .002] – .001 5.6 0.13 [.220 .005] 0.5 0.03 Dia. [.020 .001] Glass Seal VSWR (GHz) 1.06 .01f RF Leakage (dB) –(90-fGHz) Plating Part No. Passivated stainless steel 1059637-1 Recommended Mounting Detail B or E follows, pg 168. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 167 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Hermetically Sealed (Continued) Field Replaceable Solder and Braze-In (Continued) Panel Feedthrough Jack Receptacle 4.0 0.05 – 0.03 Dia. [.158 .002] – .001 5.6 0.13 [.220 .005] 10.7 [.421] VSWR (GHz) 1.06 .01f 0.5 0.03 Dia. [.020 .001] Glass Seal RF Leakage (dB) –(90-fGHz) Plating Part No. Passivated stainless steel 1059671-1 Recommended Mounting Detail B or E follows at bottom of this page. 2-Hole Flange Mount Plug Receptacle With EMI/RFI Gasket — 0.5 [.018] Dia. Contact 2.8 0.05 6.4 Dia. [.250] – 0.03 [.112 .002] – .001 2.6 Dia. [.102] 2 Plcs. 15.9 [.625] Dia. 12.2 [.481] 8.0 0.13 [.315 .005] 9.5 [.375] VSWR (GHz) 1.06 .01f RF Leakage (dB) –(90-fGHz) 0.5 0.03 [.018 .001] Dia. 6.6 [.260] Plating Part No. Passivated stainless steel 1059572-1 Recommended Mounting Detail D follows at bottom of this page. Recommended Mounting Hole Detail Detail A* 5.5 0.03 [.218 .001] Dia. Detail B* (6.35 [.250] Panel Thickness) 1.7 0.03 [.066 .001] Dia. 6.4 [.250] Ref. Panel 6.4 0.08 [.250 .003] Ref. Panel Detail D* Detail C* 3.2 0.13 [.125 .005] Panel 2.6 0.03 [.102 .001] Dia. .000 4.1 – 0.05 Dia. .000 [.162 – .002 ] 5.5 0.03 [.218 .001] Dia. Detail E* 3.2 0.13 [.125 .005] 5.5 0.03 [.218 .001] Dia. Panel 12.2 [.481] Ref. 2.9 0.03 [.115 .001] Dia. 12.2 [.481] Ref. 3.2 0.03 [.125 .001] .000 4.1 – 0.03 7.6 0.08 [.300 .003] Ref. Panel Dia. .000 [.162 – .001 ] *Consult appropriate Instruction Sheet for complete mounting details. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 168 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors Product Facts Subminiature version of OSP Blind Mate Connectors For space savings Family of connectors and adapters OSSP connectors are a subminiature version of the OSP blind mate series. Connectors in this series incorporate the design elements of the OSP interface including the float and mismate features. OSSP blind mates are about 40% smaller than OSP connectors and are designed to be Engineering Data A complete family of OSSP connectors and adapters is available including cable connectors, fixed and float mount panel connectors and hermetic connectors. Rigid mount units will function to specifications up to .064 [ .0025] radial misalignment with the mating plug connector. Applications requiring greater than .064 [ .0025] radial misalignment can use either the float design or floating connector plates with guide pins. Mechanical Impedance — Frequency — Temperature Rating — 50 ohms dc to 28.0 GHz -65 to 125 C Electrical RG 405 (.085) Semi-Rigid VSWR — RF Transmission Loss — Insulation Resistance — Contact Resistance — Center Contact Outer Contact Outer Contact to Cable Dielectric Withstanding Voltage — Corona Extinction Voltage at 70,000 Ft.— RF High Potential at 5 MHz — RF Leakage Interface Only — Power Handling — 1.05 .01f (GHz) -.040 x f (GHz) 5,000 megohms min. Force to Engage — Force to Disengage — Center Contact Retention — Durablilty — Radial Misalignment — Rigid Mount Float Mount 3 pounds max. 1.5 pounds max. 4 pounds min. 1,000 Cycles .06 [ .0025] .51 [ .020] Mating Characteristics 6.0 milliohms max. 3.0 milliohms max. 0.5 milliohms max. 675 volts RMS 250 volts min. 675 volts RMS -(90-fGHz) dB min. (fully mated) 300W at 3 GHz (sea level) and room temperature Environmental Corrosion — Vibration — Shock — Temperature Cycling — Moisture Resistance — used in applications where space is at a premium. Method 101, Condition B, MIL-STD-202 Method 204, Condition D, 20G’s, MIL-STD-202 Method 213, Condition I, 100G’s, MIL-STD-202 Method 107, Condition B, MIL-STD-202 Method 106, MIL-STD-202 Jack Connector — Center Contact Socket Oversize test Pin — .533 .003 [.0210 .0001] dia. Test Pin Finish — 16 micro inch max. Insertion Depth — .76/1.14 [.030/.045] Number of Insertions — 3 Insertion Force Test Pin — .528 .003 [.0208 .0001] dia. Test Pin Finish — 16 micro inch Insertion Force — 3 pounds max. Withdrawal Force Test Pin — .495 .003 [.0195 - .0001] dia. Test Pin Finish — 16 micro inch max. Insertion Depth — 1.27/1.91 [.050/.075] Withdrawal — 1/2 ounce min. Finish Center Contact — Housing — Gold plate per MIL-G-45204, Type II, Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 Gold plate per MIL-G-45204, Type II, Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 Material Housing — Center Contact — Dielectric — Gasket (O’Ring) — Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582 Beryllium copper per ASTM-B-196 TFE fluorocarbon per ASTM-D-1457 MIL-P-25732 169 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) Interface Mating Dimensions The connector interface, specifically designed for multiple interconnects, maintains reliable performance over the typical mechanical tolerance required in cost effective packaging. The interface test data shows excellent performance is maintained with mating gaps up to .015 inch. Jack Description A 1.22 Nom. 0.48 1.22 Nom. 0.48 Jack Plug Plug B 3.91 Min. .154 3.56 .140 Nom. Dimensions C D 5.33 Ref. 5.00 Nom.* .210 .197 5.33 Ref. 5.00 .210 .199 Min. E 3.35 Max. .132 0.51 .020 Nom. F 3.23 Max.* .127 3.25 .128 Min. *With spring bottomed. 170 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208

RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Direct Solder Attachment Bulkhead Feedthrough Cable Plug — Rear Mount 2.3 Dia. Min. [.089] 4.6 0.03 Dia. [.180 .001] 17.5 [.690] d e 3.0 Dia. [.120] Cable RG 405/U, 2.16 [.085] Flange Mount Cable Jack — Floating Rear Mount 0.08 7.1 – 0.00 Dia. .003 ] [.281 – .000 3.0 Dia. [.120] [. 7.3 Max. [.289] 0.03 4.6 – .000 Dia. .001 ] [ .182 – .000 Recommended Mounting Hole Plating Part No. Gold 1059857-1 2.4 Dia. [.093] 2 Plcs. 14.7 Dia. [.580] 11.0 0.10 [.435 .004] 0.08 7.1 – 0.00 Dia. .003 ] [.281 – .000 11.0 [.435] 0.00 7.1 – 0.05 Dia. .000 [.280 – .002 ] 18.0 [.710] 5.5 [.217] 2.3 [.089] Dia. 7.6 [.300] ded ole Cable RG 405/U, 2.16 [.085] 0.00 7.1 – 0.05 Dia. .000 [.280 – .002 ] Recommended Mounting Hole Part No. 1059868-1 Finish: Inner housing that is soldered to cable is gold plated. Outer housing is passivated stainless steel. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Feedthrough Snap-In 0.08 7.1 – 0.00 .003 [.280 – .000 ] 12.7 Ref. [.500] 11.4 Ref. [.450] 0.05 6.5 – 0.00 .002 Dia. [.256 – .000 ] 18.0 [.710] 14.7 [.570] Compression Spring 6.1 Dia. Connector [.240] Retaining Clip 7.6 Dia. [.300] Max. 3.0 Dia. [.120] Cable RG 405/U, 2.16 [.085] Part No. 1059874-1 Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 171 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexic

Dielectric — TFE fluorocarbon per ASTM-D-1457 Gasket (O'Ring) — MIL-P-25732 Mechanical Force to Engage — 3 pounds max. . Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 The specifications given refer specifically to mated pair of Part Numbers 1059410-1 and 1059402-1 (RG 402) and 1059412-1 and 1059404-1 (RG .

Related Documents:

FANUC Power Mate–MODEL F Power Mate–F Power Mate The table below lists manuals related to the Power Mate–D/F. In the table, this manual is marked with an asterisk(*). 1 Manuals related to the Power Mate–D/F Manual name Specification Number FANUC Power Mate–MODEL D/F DESCRIPTIONS B–62092E FANUC Power Mate–MODEL D/F CONNECTION .

INTERNAL PLAIN BEARING GUIDE AND PISTON ROD Catalog 0950-2 Options & Accessories OSP-E Series Electric Linear Drives and Guides Ball Screw Drive & Piston Rod. 73 ORIGA Parker Hannifin Corporation . Series KB h7 KC KL KO KPP9 KR Opt.3 Opt.4 OSP-E25SBR 6 6.8 17 24 2 2 12 OSP-E32SBR 10 11.2 31 41 5 3 16 OSP-E50SBR 15 17 43 58 6 5 28

R&S OSP‑B157W8 R&S OSP‑B157W8PLUS R&S OSP‑B157WX Preface User Manual 1178.5795.02 03 6 Frequency ranges Basically, the modules are designed to cover the 2.4 GHz and 5 GHz frequency bands. However, some of the above mentioned regulatory ETSI and FCC tests include mea-

Mega-Bergerac Aspen OCB-37-0098 Mega-Bergerac Rio OCB-37-1152 Mega-Bergerac Toscana OSP-37-5020 Mega-Bergerac Victorian OSP-37-5021 Urbana Stone Aspen MLO-37-1113 Urbana Stone Rio OCB-37-1153 Urbana Stone Toscana OSP-37-0734 Urbana Stone Victorian OSP-37-0735

B-64120EN/01 PREFACE p-1 PREFACE The models covered by this manual, and their abbreviations are : Model name Abbreviation FANUC Series 0i -TC 0i-TC FANUC Series 0i -MC 0i-MC Series 0i-C 0i FANUC Series 0i Mate -TC 0i Mate -TC FANUC Series 0i Mate -MC 0i Mate -MC Series 0i Mate -C 0i Mate NOTE

Linear Rail System Ball Screw Support Unit Linear Ball Bush Cross Roller Guide Robot Carrer Guide Memo Miniature Linear Rail System Miniature Linear Rail System Miniature through tap hole rail Caution for mounting miniature through tap hole rail Model W1 W3 H1 S G F L0 (Max length) Mass (kg/m) SBM 09-B 9-5.5 M4x0.7 7.5 20 1195 0.32 SBM 12-B 12 .

Thomson as your supplier brings some additional advantages as well. Miniature Lead Screws Miniature Brakes Miniature Linear Motion Systems Customization Thomson Advantages Advantage Benefits Widest variety of miniature linear products on the market Expedited design time Single source of engineering support Consolidated supply base

Bereavement counseling includes a broad range of transition services including outreach, counseling, and referral services for family members. There is no cost for VA bereavement counseling. More information is available by contacting the Readjustment Counseling Service at 202-461-6530 or online at the . Vet Center website. Army