Product Range Georg Fischer Wavin
Product Range Georg Fischer Wavin PE Fittings, Machines & Tools
Table of contents Introduction Page General information 4 Approvals 5 Monoline System specification 6 PE utility range – Monoline system Monoline electrofusion fittings Monoline electrofusion saddles and valves Monoline branch saddles Monoline spigot fittings Monoline flanged connections Machines & tools Soil & waste General information Page Couplers 8 Elbows 12 Tees 14 Reducers 16 End caps 17 Transition fittings 18 Electrofusion saddles 22 Tapping saddles 23 Various saddles 27 Pressure Tapping valves 30 Stop-Off valves 33 Tools & extension spindles 34 Branch saddles 39 Branch saddles topload 40 Accessories & tools 43 Elbows 46 Bends 50 Tees 57 Reducers 63 End caps 66 Flange adaptors 69 Backing flanges 73 Gaskets 77 Electrofusion units and accessories 80 Tools for preparing pipe surfaces 84 Tapping tools 89 Clamps and installation aids 92 Squeeze-off and rerounding tools 97 Plastic pipe cutters and accessories 100 Waviduo Couplers 105 Electrofusion unit and accessories 106 Page Code index 108 General conditions 116
General information Measures, units and shortcuts d, d1, d2 DN L, L1, L2 H, H1, H2 e, e1, e2 kg SC AL S SDR 4 Diameter Nominal diameter Length Height Wall thickness Weight Size of bolts Number of bolt holes Pipe series Standard dimension ratio Working pressure The pressure rating of Georg Fischer Wavin PE-Fittings refers to the calculated values of EN 12201 and EN 1555 considering the total security value. National Regulations and standards have to be observed. Specification Georg Fischer Wavin fittings meet the ISO-standards, CEN-standards (respectively draft standards) as well as other national standards. Approval The Georg Fischer Wavin products are subjected to extensive internal and external tests and are approved by all major institutes and approval authorities (for example: DVGW, SVGW, KIWA, IIP, engie, Gas Natural, etc.). General conditions of supply Please find the general conditions of supply on the last page. Quality management / environmental management Quality management system is well established at Georg Fischer Wavin and is continuously improved to satisfy our customers. Georg Fischer Piping Systems is certified according to ISO 9001 as well as ISO 14001 (environmental management). Technical documentation For further technical information we offer you the Georg Fischer Wavin technical manual, the technical dossier and the installation instructions of the products. Service, training and consultation Georg Fischer Wavin offers you the possibility to do trainings and extend your knowledge in the piping systems field. Please contact your sales company for further information and registrations.
Approvals Georg Fischer Wavin has always been committed to providing the best quality in products and services. We know that, in more than 100 countries, our solutions are used in vital applications that allow for no failures or unplanned downtimes. Our experts work every day to make sure that you receive the best quality possible. You can trust the products from Georg Fischer Wavin today and for years to come. This is expressed in the way we work: quality, safety, and responsibility are implemented in our organization to serve you as well as possible. Georg Fischer Wavin fulfils the ISO 9001, ISO 14001, and OHSAS 18001 standards for quality, environmental, and work safety management. After all, governance and process excellence are essential for quality. Our products are designed to be safe and easy to install, with lifespans as long as the applications themselves. To ensure this, we subject our products to extensive internal and external tests and reviews. Their outstanding quality is confirmed by the numerous certifications and approvals they have received. These include global and national standards from highly respected organizations and institutions, but also specific customer certifications, as requested. You will find a selection of product approvals below on this page. Our experts are happy to provide you the certificates you need for your applications and guide you through the applicable systems and standards, as needed. 5
Monoline System specification Standards: PE100 Material Color Density Thermal expansion coefficient Thermal conductivity at 23 C Thermal expansion Yield stress at 23 C Tensile E-modul at 23 C Charpy notched impact strength at 23 C Charpy notched impact strength at -40 C Limiting Oxygen Index (LOI) Dimensions Surface condition Material and product approvals Packaging Marking and labeling RAL 9005 0.95 g/ cm3 (EN ISO 1183 / ASTM D 792) 0.15–0.20 mm/ m K (DIN 53752) 0.38 W/ m K (EN 12664) 0.16–0.18 mm/ m K 25 N/ mm2 (EN ISO 527) 900 N/ mm2 (EN ISO 527) 83 kJ/ m2 (EN ISO 179) 13 kJ/ m2 (EN ISO 179) 17.4 % (ISO 4589) d20-d2000 in accordance to EN 1555-3 and EN 12201-1 in accordance to EN 1555-3 and EN 12201-1 - ACS (Attestation de Conformité Sanitaire) - BSI (BSI Assurance UK Limited) - NF (CERTIgaz) - DVGW (Deutscher Verein des Gas- und Wasserfaches) - FM Approvals - Global Mark - IIP ( Instituto Italiano dei Plastici) - INSTA-CERT (Dancert S/A) - KIWA (Keuringsinstituut voor Waterleidingsartikelen) - KTW / W270 (Kunststoff-Trinkwasser-Empfehlungen) - SVGW (Schweizerischer Verein des Gas- und Wasserfaches) Fittings and valves are bagged All components are embossed with a permanent identification during the production process to ensure full traceability: - Brand name - Material - Dimensions - Pressure rating Approvals / Acceptance: 6 - Lot No. - Product description - Article number - Standard and approvals
Monoline electrofusion fittings Electrofusion fittings Couplers Page 8 Elbows 12 Tees 14 Reducers 16 End caps 17 Transition fittings 18 7
Couplers Coupler PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators Removable centre stop Note: Available as from June 2019 d Code Weight (mm) 20 25 32 40 50 63 d1 L SDR pipe (kg) (mm) (mm) 701 485 111 701 485 112 701 485 113 701 485 114 701 485 115 701 485 116 0.053 0.050 0.071 0.095 0.131 0.194 31 36 44 54 66 81 70 70 72 80 88 96 9-11 9-11 9-11 9-11 9-11 9-17.6 d1 L Coupler PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators * Removable centre stops d Code Weight (mm) * * * * * * 8 75 90 110 125 140 160 180 200 225 250 280 315 SDR pipe (kg) (mm) (mm) 701 485 106 701 485 110 701 485 130 701 485 715 701 485 716 701 485 717 701 485 718 701 485 719 701 485 720 701 485 725 701 485 726 701 485 729 0.282 0.406 0.670 0.758 0.962 1.367 1.811 2.333 3.334 4.210 5.563 7.955 96 113 138 154 172 195 219 244 273 304 340 382 110 125 145 158 168 180 194 208 224 244 252 268 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6 11 - 17/17.6
Coupler PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators With active reinforcement d Code (mm) 355 400 450 500 560 630 710 800 Weight d1 L SDR pipe (kg) (mm) (mm) 701 485 080 701 485 081 701 485 082 701 485 083 701 485 084 701 485 085 701 485 086 701 485 087 13.098 18.320 24.700 33.700 46.200 65.300 87.400 114.500 438 493 554 616 689 775 874 982 291 295 327 358 396 440 463 484 9 - 17/17.6 9 - 17/17.6 9 - 17/17.6 9 - 17/17.6 9 - 17/17.6 9 - 17/17.6 9 - 17/17.6 9 - 17/17.6 Coupler PE 100 SDR 11 (ISO S5) 16 bar Water Only for water applications 4 mm pin connectors d Code (mm) 900 Weight (kg) 753 911 652 d1 L SDR pipe (mm) (mm) 137.930 1110 550 9-17.6 9
Coupler PE 100 SDR 17 (ISO S8) 5 bar Gas / 10 bar Water 4 mm pin connectors Limited path fusion indicators * Removable centre stops d Code Weight (mm) * 160 180 200 225 250 280 315 d1 L SDR pipe (kg) (mm) (mm) 701 485 735 701 485 736 701 485 737 701 485 738 701 485 739 701 485 740 701 485 741 1.009 1.450 1.706 2.557 4.614 5.675 8.000 186 213 233 261 304 340 382 180 194 208 224 244 252 268 17 - 26 17 - 26 17 - 26 17 - 26 17 - 26 17 - 26 17 - 26 Coupler PE 100 SDR 17 (ISO S8) 5 bar Gas / 10 bar Water 4 mm pin connectors Limited path fusion indicators With active reinforcement d Code Weight (mm) 355 400 450 500 560 630 710 800 d1 L SDR pipe (kg) (mm) (mm) 701 471 752 701 471 753 701 471 754 701 471 755 701 471 756 701 471 757 701 471 758 701 471 759 9.522 17.000 16.000 22.000 29.500 35.000 55.600 73.000 416 467 526 584 647 727 820 922 291 295 327 358 396 440 463 484 17 - 33 17 - 33 17 - 33 17 - 33 17 - 33 17 - 33 17 - 33 17 - 33 Coupler PE 100 SDR 17 (ISO S8) 10 bar water Only for water applications 4 mm pin connectors d Code (mm) 900 1000 1200 10 Weight (kg) 753 911 852 753 911 853 753 911 854 d1 L SDR pipe (mm) (mm) 93.150 1030 125.650 1143 196.450 1370 550 600 650 9-26 9-26 9-26
Coupler PE 100 SDR 26 (ISO S12.5) 6 bar water Only for water applications 4 mm pin connectors d Code (mm) 710 800 900 1000 1200 Weight (kg) 753 911 950 753 911 951 753 911 952 753 911 953 753 911 954 d1 L SDR pipe (mm) (mm) 31.920 797 42.800 897 57.580 1009 79.270 1121 125.700 1345 360 380 400 440 480 9-26 9-26 9-26 9-26 9-26 11
Elbows Elbow 90 With integral pipe fixation PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d Code Weight (mm) 20 25 32 40 50 63 d1 L L1 z SDR pipe (kg) (mm) (mm) (mm) (mm) 701 485 811 701 485 812 701 485 813 701 485 814 701 485 815 701 485 816 0.087 0.074 0.094 0.128 0.196 0.312 35 35 44 54 66 81 54 54 53 62 71 81 34 34 36 39 43 48 20 20 17 23 28 32 L L1 z 11 11 11 11 11 11 Elbow 90 PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d Code Weight (mm) 75 90 110 125 160 180 d1 SDR pipe (kg) (mm) (mm) (mm) (mm) 701 485 603 701 485 617 701 485 618 701 485 619 701 485 790 701 485 791 0.413 0.827 1.265 1.742 3.845 5.342 97 115 140 161 208 234 94 122 147 155 191 219 54 62 72 78 88 96 40 60 76 77 103 114 11 11 11 -17/17.6 11 -17/17.6 11 -17/17.6 11 -17/17.6 L L1 z SDR pipe Elbow 90 PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators Two separate fusion zones d Code Weight (mm) 200 225 250 12 d1 (kg) (mm) (mm) (mm) (mm) 701 485 854 701 485 858 701 485 859 7.987 13.400 15.715 250 280 310 298 318 347 104 112 123 194 206 224 11-17/17.6 11-17/17.6 11-17/17.6
Elbow 45 With integral pipe fixation PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d Code Weight (mm) 32 40 50 63 d1 L L1 z SDR pipe (kg) (mm) (mm) (mm) (mm) 701 485 803 701 485 804 701 485 805 701 485 806 0.074 0.113 0.158 0.258 44 54 66 81 44 50 56 63 36 39 43 48 8 11 13 15 L L1 z 11 11 11 11 Elbow 45 PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d Code Weight (mm) 75 90 110 125 160 180 d1 SDR pipe (kg) (mm) (mm) (mm) (mm) 701 485 604 701 485 620 701 485 621 701 485 622 701 485 795 701 485 796 0.346 0.557 0.973 1.466 3.005 4.047 97 115 140 160 208 234 71 91 112 119 134 142 54 62 72 78 89 96 17 29 40 41 42 47 11 11 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 L L1 z SDR pipe Elbow 45 PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators Two separate fusion zones d Code Weight (mm) 200 225 250 d1 (kg) (mm) (mm) (mm) (mm) 701 485 849 701 485 851 701 485 853 7.578 9.540 12.740 250 280 310 232 247 275 104 112 123 128 135 152 11-17/17.6 11-17/17.6 11-17/17.6 13
Tees Tee 90 equal With integral pipe fixation PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d Code Weight (mm) 20 25 32 40 50 63 d1 L L1 z z1 H SDR pipe (kg) (mm) (mm) (mm) (mm) (mm) (mm) 701 485 821 701 485 822 701 485 823 701 485 824 701 485 825 701 485 826 0.090 0.075 0.109 0.175 0.262 0.420 35 35 44 54 66 81 90 90 102 120 135 152 34 34 36 39 43 48 11 11 15 21 24 28 92 92 100 114 126 150 67 70 74 82 90 102 L L1 z z1 H 11 11 11 11 11 11 Tee 90 equal PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d Code Weight (mm) 75 90 110 125 160 180 d1 SDR pipe (kg) (mm) (mm) (mm) (mm) (mm) (mm) 701 485 601 701 485 623 701 485 624 701 485 600 701 485 636 701 485 646 0.566 0.887 1.608 2.251 5.000 6.050 97 115 140 151 210 233 178 205 255 276 330 350 54 62 72 78 89 96 35 41 56 60 76 79 143 161 184 207 220 247 87 94 104 113 105 120 11 11 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 L L1 z z1 H SDR pipe Tee 90 equal PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators Two separate fusion zones d Code Weight (mm) 200 225 250 14 d1 (kg) (mm) (mm) (mm) (mm) (mm) (mm) 701 485 777 701 485 778 701 485 779 10.420 15.145 19.245 250 280 310 590 636 685 104 112 123 191 206 220 250 270 288 117 122 127 11-17/17.6 11-17/17.6 11-17/17.6
Tee 90 reduced PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators Two separate fusion zones d d2 Code Weight (mm) (mm) 160 160 160 200 200 200 225 225 225 250 250 63 90 110 90 110 160 90 110 160 110 160 d1 L L1 z z1 H SDR pipe (kg) (mm) (mm) (mm) (mm) (mm) (mm) 701 485 771 701 485 772 701 485 773 701 485 630 701 485 631 701 485 633 701 485 774 701 485 775 701 485 776 701 485 639 701 485 640 4.940 5.040 5.160 11.260 11.260 11.260 12.700 12.750 12.951 12.750 12.750 200 200 200 250 250 250 280 280 280 310 310 493 492 491 595 600 595 666 670 667 709 711 90 90 90 104 104 104 112 112 112 123 123 127 158 158 194 194 194 217 217 217 220 220 176 188 195 215 218 236 226 235 255 245 264 65 79 85 81 84 101 80 85 105 85 101 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 15
Reducers Reducer With integral pipe fixation PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d d2 Code Weight (mm) (mm) 25 32 32 40 40 40 50 50 63 63 63 20 20 25 20 25 32 32 40 32 40 50 d1 L L1 L2 z SDR pipe (kg) (mm) (mm) (mm) (mm) (mm) 701 485 831 701 485 832 701 485 833 701 485 834 701 485 836 701 485 835 701 485 837 701 485 838 701 485 839 701 485 840 701 485 841 0.054 0.066 0.060 0.080 0.086 0.090 0.113 0.117 0.164 0.166 0.183 35 44 44 54 54 54 66 66 81 81 81 74 79 79 88 88 88 96 96 106 106 106 34 33 33 33 33 33 35 39 35 39 43 34 36 36 40 40 39 43 43 48 48 48 6 10 10 15 15 13 18 14 23 19 15 d1 L L1 L2 z 11 11 11 11 11 11 11 11 11 11 11 Reducer PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d d2 Code Weight (mm) (mm) 90 110 110 125 160 160 180 63 63 90 90 90 110 125 SDR pipe (kg) (mm) (mm) (mm) (mm) (mm) 701 485 627 701 485 616 701 485 628 701 485 602 701 485 656 701 485 659 701 485 661 0.370 0.644 0.657 0.878 1.600 1.783 2.340 113 140 138 152 202 202 225 146 184 173 180 227 226 254 63 71 73 79 90 90 96 47 58 63 61 72 71 78 36 55 38 40 65 65 80 11 11 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 d1 L L1 L2 z SDR pipe Reducer PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators Two separate fusion zones d d2 Code Weight (mm) (mm) 200 225 225 250 250 250 16 160 160 200 160 200 225 (kg) (mm) (mm) (mm) (mm) (mm) 701 485 842 701 485 843 701 485 750 701 485 844 701 485 845 701 485 799 5.049 5.997 8.200 7.455 8.686 8.450 250 280 280 310 310 310 365 385 390 400 417 430 104 112 112 123 123 122 90 90 104 90 104 112 171 183 173 187 200 195 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6
End caps End cap With integral pipe fixation PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d Code Weight (mm) 20 25 32 40 50 63 d1 L L1 SDR pipe (kg) (mm) (mm) (mm) 701 485 950 701 485 951 701 485 952 701 485 953 701 485 954 701 485 955 0.037 0.042 0.054 0.072 0.099 0.150 35 35 44 54 66 81 52 52 52 56 60 66 44 44 44 47 49 54 11 11 11 11 11 11 End cap (kit) PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators Supplied as kit including Monoline Coupler d Code Weight (mm) 75 90 110 125 140 160 180 d1 L SDR pipe (kg) (mm) (mm) 701 485 936 701 485 937 701 485 938 701 485 939 753 961 716 753 961 717 701 485 942 0.377 0.563 1.084 1.377 2.250 2.382 3.181 96 113 133 155 175 197 220 110 125 145 158 170 180 194 11 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 End cap PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators d Code Weight (mm) 160 200 225 250 d1 L L1 SDR pipe (kg) (mm) (mm) (mm) 701 485 943 701 485 944 701 485 948 701 485 949 2.000 3.040 4.500 5.930 200 250 280 310 143 162 170 185 90 104 112 123 11-17/17.6 11-17/17.6 11-17/17.6 11-17/17.6 17
Transition fittings Transition elbow 90 PE/brass (CW617N) Male thread PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water With integral pipe fixation 4 mm pin connectors Limited path fusion indicators Supplied as a kit d R (mm) (inch) 20 25 32 32 40 40 40 50 50 50 63 63 63 2 4 1 1 1 2 1 1 1 4 1 1 2 1 1 1 4 1 1 2 1 1 4 1 1 2 2 1 3 Code Weight d1 L s SDR pipe (kg) (mm) (mm) (mm) 701 485 911 701 485 912 701 485 913 701 485 922 701 485 923 701 485 914 701 485 924 701 485 925 701 485 926 701 485 915 701 485 927 701 485 928 701 485 916 0.300 0.320 0.364 0.552 0.512 0.570 0.632 0.694 0.761 0.722 1.037 1.033 1.101 31 36 44 44 54 54 54 66 66 66 81 81 81 96 97 98 100 107 109 109 116 118 118 128 128 132 30 35 40 60 50 50 60 60 60 60 70 70 70 11 11 11 11 11 11 11 11 11 11 11 11 11 Transition elbow 90 PE/brass (CW617N) Female thread PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water With integral pipe fixation 4 mm pin connectors Limited path fusion indicators Supplied as a kit d Rp (mm) (inch) 32 40 50 63 63 63 63 1 1 1 4 1 1 2 1 1 1 4 1 1 2 2 Code Weight d1 L s SDR pipe (kg) (mm) (mm) (mm) 701 485 917 701 485 918 701 485 919 701 485 945 701 485 946 701 485 947 701 485 920 0.350 0.540 0.790 1.406 1.362 1.285 1.176 44 54 66 81 81 81 81 89 100 109 123 123 123 123 40 50 60 70 70 70 70 11 11 11 11 11 11 11 Transition adaptor PE/brass (CW617N) Male thread PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water d R (mm) (inch) 20 25 32 32 32 2 4 1 1 1 4 1 1 2 1 3 Code Weight 701 485 860 701 485 861 701 485 862 701 485 880 701 485 881 0.127 0.182 0.256 0.375 0.370 table continued on the next page 18 L z SDR pipe (kg) (mm) (mm) 75 76 80 82 82 33 33 35 35 35 11 11 11 11 11
d R (mm) (inch) 40 40 40 50 50 50 63 63 1 1 1 4 1 1 2 1 1 1 4 1 1 2 1 1 4 2 Code Weight L z SDR pipe (kg) (mm) (mm) 701 485 882 701 485 863 701 485 883 701 485 885 701 485 884 701 485 864 701 485 886 701 485 865 0.358 0.410 0.480 0.463 0.539 0.508 0.702 0.776 84 86 86 88 90 90 94 98 39 39 39 43 43 43 47 47 11 11 11 11 11 11 11 11 Transition adaptor PE/brass (CW617N) Female thread PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water d Rp (mm) (inch) 32 40 50 63 63 63 63 1 1 1 4 1 1 2 1 1 1 4 1 1 2 2 Code Weight L z SDR pipe (kg) (mm) (mm) 701 485 866 701 485 867 701 485 868 701 485 972 701 485 973 701 485 974 701 485 869 0.244 0.387 0.593 1.071 1.017 0.938 0.842 71 77 81 89 89 89 89 35 39 43 47 47 47 47 11 11 11 11 11 11 11 Union adaptor PE 100 SDR 11 (ISO S5) With female thread and PE-union end The Code Nr. includes the entire union (galvanised) d Rp (mm) (inch) 20 25 32 40 50 63 2 4 1 1 1 4 1 1 2 2 1 3 Code Weight z L SW1 (kg) (mm) (mm) 701 485 560 701 485 561 701 485 562 701 485 563 701 485 564 701 485 565 0.152 0.252 0.333 0.563 0.765 1.054 94 100 108 114 124 134 52 52 54 57 65 65 D D1 H G (mm) (inch) 27 32 34 43 50 61 1 11/4 11/2 2 21/4 23/4 Flat gasket Model: For union adaptors d Code Weight (mm) 20 25 32 40 50 63 (kg) (mm) (mm) (mm) 701 479 360 701 479 361 701 479 362 701 479 363 701 479 364 701 479 365 0.010 0.001 0.003 0.003 0.005 0.003 30 39 44 56 62 78 20 25 32 40 46 60 2 2 2 2 2 2 19
Transition fittings PE/steel PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water Electrofusion weldable PE coated for corrosion resistance * Steel pipe galvanized * 20 d d1 (mm) (inch) 20 25 32 40 50 63 75 90 110 110 125 160 180 200 225 250 250 280 315 355 400 2 4 1 1 1 4 1 1 2 2 2 1 2 3 3 4 4 6 6 8 8 8 10 10 12 12 16 1 3 Code Weight L L1 L2 (kg) (mm) (mm) (mm) 775 641 502 775 641 507 775 641 510 775 641 514 775 641 518 775 641 524 775 641 632 775 641 636 775 641 640 775 641 641 775 641 645 775 641 655 775 641 659 775 642 664 775 642 669 775 642 665 775 642 666 775 642 673 775 642 672 775 642 675 775 642 678 0.450 0.658 0.988 1.208 1.355 2.011 2.983 3.762 4.381 6.633 6.833 12.406 11.935 19.647 20.154 21.354 30.000 31.000 35.000 49.000 94.000 425 463 460 470 480 480 540 580 580 585 585 610 610 630 607 630 640 640 725 735 770 15 35 35 35 35 35 35 45 45 45 45 45 45 45 45 45 45 45 45 45 45 80 90 96 100 110 110 127 141 145 145 148 158 168 155 145 200 140 160 220 260 190
Monoline electrofusion saddles and valves Electrofusion saddles and valves Page Electrofusion saddles 22 Tapping saddles 23 Various saddles 27 Pressure Tapping valves 30 Stop-Off valves 33 Tools & extension spindles 34 21
Electrofusion saddles Electrofusion saddle PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water Complete with lower part 4 mm pin connectors Limited path fusion indicators In combination with parts of the modular System, the SDR compatibility is defined by the tapping-tees, tapping-valves and spigots with cutter. Topload: delivery without lower part for assembling as Top Load with tool no. 799.350.477 * Complete with moulded-on lower part d d1 Code Weight (mm) (mm) * * Topload Topload Topload 22 63 75 90 110 110 125 140 160 160 180 200 225 250 280 315 ‐ 355 400 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 63 L SDR pipe (kg) (mm) 193 131 037 193 131 047 193 131 057 193 131 067 193 133 067 193 131 077 193 131 087 193 131 097 193 133 097 193 131 107 193 131 117 193 131 127 193 131 137 193 131 147 193 131 157 193 131 177 0.325 0.455 0.415 0.458 0.490 0.502 0.523 0.493 0.543 0.600 0.634 0.618 0.627 0.359 0.373 0.356 165 165 165 165 182 165 165 165 182 165 165 165 165 165 165 165 9 - 11 9 - 11 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 26 9 - 26 9 - 26 9 - 26 9 - 26 9 - 33 9 - 33
Tapping saddles Tapping saddle Monobloc version PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water With integrated cutter to tap live mains under pressure Complete with lower part 4 mm pin connectors Limited path fusion indicators Long fusion outlet O-ring-sealed screw cap d d1 Code Weight (mm) (mm) 40 40 40 50 50 50 63 20 25 32 20 25 32 32 d2 H H1 L L1 z SDR pipe (kg) (mm) (mm) (mm) (mm) (mm) (mm) 701 131 412 701 131 413 701 131 414 701 131 422 701 131 423 701 131 424 193 131 434 0.225 0.226 0.225 0.214 0.212 0.228 0.425 16 16 16 16 16 16 25 99 99 99 104 104 104 134 33 33 33 38 38 38 44 103 103 103 103 103 103 126 70 70 70 70 70 70 70 102 102 120 102 102 120 130 9 - 11 9 - 11 9 - 11 9 - 11 9 - 11 9 - 11 9 - 17.6 Tapping saddle with gas-stop type 1-5 bar Monobloc version PE 100 SDR 11 (ISO S5) 5 bar Gas (for pressure 1 bar -5 bar) With integrated cutter to tap live mains under pressure Gas-Stop System Pipelife (GS 20/1 or GS 32/1) Without overflow orifice Set comes with Gas-Stop pre-assembled Installation instructions of Gas-Stop manufacturer are to be observed Complete with lower part 4 mm pin connectors Limited path fusion indicators Long fusion outlet O-ring-sealed screw cap d d1 Code Weight (mm) (mm) 40 40 63 63 20 32 20 32 d2 H H1 L L1 z (kg) (mm) (mm) (mm) (mm) (mm) (mm) 701 281 113 701 281 152 193 281 434 193 281 153 0.229 0.277 0.365 0.840 16 16 25 25 99 99 134 134 33 33 44 44 103 103 126 126 70 70 70 70 102 120 115 130 Vn max SDR pipe (m³ h) 25 100 25 100 9 - 11 9 - 11 9 - 17.6 9 - 17.6 23
Tapping saddle Monobloc version PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water With integrated cutter to tap live mains under pressure Limited path fusion indicators *Compatible with GASSTOP type GS d d1 Code Weight (mm) (mm) * 63 63 63 90 90 90 90 90 90 110 110 110 110 110 110 125 125 125 125 125 125 160 160 160 160 160 160 * * * * * * * * * 20 25 32 20 25 32 40 50 63 20 25 32 40 50 63 20 25 32 40 50 63 20 25 32 40 50 63 d2 H H1 L L1 z SDR pipe (kg) (mm) (mm) (mm) (mm) (mm) (mm) 701 131 932 701 131 933 701 131 934 701 131 952 701 131 953 701 131 954 701 131 955 701 131 956 701 131 957 701 131 962 701 131 963 701 131 964 701 131 965 701 131 966 701 131 967 701 131 972 701 131 973 701 131 974 701 131 975 701 131 976 701 131 977 701 131 992 701 131 993 701 131 994 701 131 995 701 131 996 701 131 997 0.413 0.387 0.398 0.494 0.527 0.538 0.450 0.450 0.450 0.563 0.570 0.580 0.600 0.600 0.600 0.566 0.568 0.597 0.597 0.597 0.597 0.665 0.640 0.671 0.790 0.790 0.790 25 25 25 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 146 146 146 198 198 198 198 198 198 208 208 208 208 208 208 216 216 216 216 216 216 233 233 233 233 233 233 44 44 44 61 61 61 61 61 61 71 71 71 71 71 71 79 79 79 79 79 79 96 96 96 96 96 96 144 144 144 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 162 76 76 76 76 76 76 57 63 76 76 76 76 57 63 100 76 76 76 57 63 76 76 76 76 57 63 100 110 110 110 110 115 115 197 203 115 115 115 125 192 203 125 120 120 120 197 203 120 120 125 130 197 203 170 9 - 11 9 - 11 9 - 11 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 Tapping saddle with gas-stop type 1-5 bar Monobloc version PE 100 SDR 11 (ISO S5) 5 bar Gas (for pressure 1 bar -5 bar) With integrated cutter to tap live mains under pressure Complete with moulded-on lower part Gas-Stop System Pipelife (GS 20/1 or GS 32/1) Without overflow orifice Set comes with Gas-Stop pre-assembled Installation instructions of Gas-Stop manufacturer are to be observed 4 mm pin connectors Limited path fusion indicators Long fusion outlet O-ring-sealed screw cap d d1 Code Weight (mm) (mm) 63 63 90 90 110 110 20 32 20 32 20 32 701 130 432 701 130 434 701 130 452 701 130 454 701 130 462 701 130 464 0.368 0.392 0.524 0.520 0.552 0.677 table continued on the next page 24 d2 H H1 L L1 z (kg) (mm) (mm) (mm) (mm) (mm) (mm) 25 25 32 32 32 32 146 146 198 198 208 208 44 44 61 61 71 71 144 144 162 162 162 162 76 76 76 76 76 76 110 110 115 115 115 125 Vn max SDR pipe (m³ h) 25 100 25 100 25 100 9 - 11 9 - 11 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6
d d1 Code Weight (mm) (mm) 125 125 160 160 20 32 20 32 d2 H H1 L L1 z Vn max SDR pipe (kg) (mm) (mm) (mm) (mm) (mm) (mm) 701 130 472 701 130 474 701 130 492 701 130 494 0.664 0.609 0.672 0.786 32 32 32 32 216 216 233 233 79 79 96 96 162 162 162 162 76 76 76 76 (m³ h) 120 120 120 130 25 100 25 100 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 Tapping saddle With 360 rotatable outlet PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water With integrated cutter to tap live mains under pressure Complete with lower part 4 mm pin connectors Limited path fusion indicators Long fusion outlet O-ring-sealed screw cap d315-400 mm: restriced application for pipes d355 and d400 mm. Not suitable for pipes if wall thickness is larger than SDR17 pipes. For SDR11 pipes tapping saddles 193131867 and 193131877 are to be used. *Supplied as kit with enclosed service line electrofusion reducer Topload: delivery without lower part for assembling as Top Load with tool no. 799.350.477; angle adaptor (799.350.340) for fusion cable required d d1 Code Weight (mm) (mm) * * * 63 63 63 75 75 75 75 140 140 140 140 140 180 180 180 180 180 180 200 200 200 200 200 200 225 225 225 225 225 225 250 250 250 40 50 63 32 40 50 63 20 25 32 40 63 20 25 32 40 50 63 20 25 32 40 50 63 20 25 32 40 50 63 20 25 32 d2 H H1 L L1 z SDR pipe (kg) (mm) (mm) (mm) (mm) (mm) (mm) 701 131 405 701 132 436 701 131 437 701 131 444 701 131 445 701 132 446 701 131 447 193 131 482 193 131 483 193 131 484 193 131 485 193 131 487 193 131 502 193 131 503 193 131 504 193 131 505 193 132 506 193 131 507 193 131 512 193 131 513 193 131 514 193 131 515 193 132 516 193 131 517 193 131 522 193 131 523 193 131 524 193 131 525 193 132 526 193 131 527 193 131 532 193 131 533 193 131 534 0.718 1.619 1.455 0.812 0.849 1.748 1.549 0.887 0.874 0.894 0.920 1.180 0.994 1.001 0.957 1.007 1.938 1.587 1.015 1.015 0.985 1.024 1.957 1.290 1.016 1.025 1.019 1.029 1.921 1.738 1.025 1.026 0.996 32 32 32 32 32 32 32 32 32 32 32 35 32 32 32 32 35 35 32 32 32 32 35 35 32 32 32 32 35 35 32 32 32 186 234 134 191 191 240 240 233 233 233 233 273 244 244 244 244 293 293 254 254 254 254 303 303 266 266 266 266 315 315 279 279 279 108 112 112 113 113 118 118 146 146 146 146 151 166 166 166 166 171 171 176 176 176 176 181 181 188 188 188 188 193 193 201 201 201 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 165 81 100 100 76 81 100 100 71 71 76 81 100 71 71 76 81 100 100 71 71 76 81 100 100 71 71 76 81 100 100 76 76 76 137 160 160 130 137 160 160 130 130 130 137 160 130 130 130 137 160 160 130 130 130 137 160 160 130 130 130 137 160 160 130 130 130 9 - 11 9 - 11 9 - 11 9 - 11 9 - 11 9 - 11 9 - 11 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 17.6 9 - 26 9 - 26 9 - 26 9 - 26 9 - 26 9 - 26 9 - 26 9 - 26 9 - 26 9 - 26 9 - 26 9 - 26 11 - 26 11 - 26 11 - 26 11 - 26 11 - 26 11 - 26 11 - 26 11 - 26 11 - 26 table continued on the next page 25
d d1 Code Weight (mm) (mm) * Topload Topload Topload 250 250 250 280 315-355 400 40 50 63 63 63 63 d2 H H1 L L1 z SDR pipe (kg) (mm) (mm)
SDR pipe 20 701 485 111 0.053 31 70 9-11 25 701 485 112 0.050 36 70 9-11 32 701 485 113 0.071 44 72 9-11 40 701 485 114 0.095 54 80 9-11 50 701 485 115 0.131 66 88 9-11 63 701 485 116 0.194 81 96 9-17.6 Coupler PE 100 SDR 11 (ISO S5) 10 bar Gas / 16 bar Water 4 mm pin connectors Limited path fusion indicators * Removable .
fischer service engineers GERMANY fischerwerke GmbH & Co. KG Klaus-Fischer-Straße 1 72178 Waldachtal Germany Phone 49 (0)74 43 12 - 45 53 act@fischer.de · www.fischer.de Further information and approvals can be downloaded from the homepage of fischer: www.fischer.de ACT Service Argentina fischer Argentina S.A. Armenia 3044 1605 Munro .
Baermann Complete Method - Part 3 Fischer 13.95 Bettony-Baermann Method for Clarinet Fischer 15.95 Feldstein/Clark The Yamaha Advantage Fischer 6.95 Klose Celebrated Method - Complete Fischer 25.95 Klose Daily Exercises Fischer 6.95 Klose Scales and Exercises Fischer 6.95 Klose My First Klose Fischer 6.95 Klose-Prescott First and Second Year .
GEORG FISCHER GF Dear Customers and Business Partners It gives us great pleasure to be able to present you with the first copy of our new complete catalogue for 2004. As one of Europe’s largest suppliers to the Automotive and Truck industry the names Georg Fischer and particularly Georg Fischer Verkehrstechnik are synonymous with Quality and .
Any installation should follow the Georg Fischer Piping Systems installation guidelines for industrial piping and the guidelines issued by the DVS. Approved pipes comply with the corresponding quality specifications of DIN Certco ZP 1.1.1. 4. Fittings All PVC-U fittings shall be Imperial (inch)-sized manufactured by Georg Fischer
Test. 5. One Is Known As Volumetric Karl Fischer Titration. The Other Method Is Known As Coulometric Karl Fischer Titration. KF METHODS Volumetric Titration Coulometric . PRINCIPLE OF WORKING 1. The Principle Of Karl Fischer . Amount Of Karl Fischer Reagent To Reach The Characteristic Endpoint. 2. Weight Accurately 150 - 350 Mg Of Sodium .
2012 / 2013 Product Catalogue Georg Fischer Waga N.V. 2 World wide at home Georg Fischer Waga N.V. Founded in 1957 and with the main focus on the development, production and sales of high quality connection techniques. For many years
* For detailed information please consult the GF Piping Systems online catalogue For more detailed physical properties and product pressure – temperature curves, please consult the Georg Fischer Piping Systems Planning Fundamentals on the Georg Fischer Piping Systems website. 2.4 Approvals / Acceptance / Conformance
second grade levels J/K/L , feature series for readers to study character. Teachers will want to spend the time to set up the Teachers will want to spend the time to set up the classroom library to showcase characters, no matter the reading levels of their readers.
