Conical Countersink EU HSCo 90 DIN 335 C

1y ago
16 Views
1 Downloads
747.66 KB
5 Pages
Last View : 5d ago
Last Download : 5m ago
Upload by : Azalea Piercy
Transcription

Conical countersink EU HSCo 90 DIN 335 C The all-rounder with extremely uneven pitch (EU) and additional relief grinding exclusively available from Würth for perfect countersinking. Extremely uneven pitch Maximum surface quality: exact, round, chatter-free countersinks Maximum smoothness in all materials Higher cutting values possible Exclusive, extra radial relief Up to 3x faster than conventional countersinks Up to 2x more countersinking than conventional countersinks Significantly less effort when used with hand-held drills Deeper countersinking possible For universal use Thanks to special tip geometry and HSCo cutting material, offers the best performance in the machining of almost all materials and applications Three-face shank No twisting in the drill chuck: faster, more comfortable working Optimum power transmission Protection of the drill chuck from damage Little effort required to open and close the drill chuck Sustainable product packaging made of 100% PCR (recycled plastic from household waste), 100% recyclable and Cradle to Cradle Certified Bronze Material to be processed CL01 7507030811, Rev: 0.63, State: 30. 09. 2022 Quality Number of cutting edges (Z) Standards Form Cutting material Countersink angle Surface Shank style Service life Countersinking speed (point system) Countersinking quality (point system) Versatility Steel, Cast metal, Stainless steel, Titanium, Special alloy, Hard and tough material, Non-ferrous metal, Plastic ZEBRA-Premium 3 PCS DIN 335 C HSCo 90 Degree Uncoated 3-face shank Illustration only

Countersinking behaviour (point system) Material of sub-group Color Coding System Spot-facer diameter (d1) 4.3 mm 6.3 mm 8.3 mm 10.4 mm 12.4 mm 16.5 mm 20.5 mm 25 mm 31 mm 37 mm General structural steels, Non-alloyed tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron, White cast iron, Stainless steels, sulphurated, Stainless steels, austenitic, Stainless steels, martensitic, Titanium, Titanium alloys, Special alloys, Hardox, Spring steels, Aluminium alloys, Aluminium wrought alloys, Aluminium casting alloys ( 10% silicon), Aluminium casting alloys ( 10% silicon), Magnesium alloys, Copper, Brass, short-chipping, Brass, long-chipping, Bronze, short-chipping, Bronze, long-chipping, Plastics, duroplastic, Plastics, thermoplastic, Plastics, aramidefibre reinforced, Plastics, glass/carbon-fibre-reinforced Stainless steel Steel Non-ferrous metal High-strength material Shaft diameter (d2) Tip diameter (d3) Length (l1) Art. no. P. Qty. 4 mm 5 mm 6 mm 6 mm 8 mm 10 mm 10 mm 10 mm 12 mm 12 mm 1.3 mm 1.5 mm 2 mm 2.5 mm 2.8 mm 3.2 mm 3.5 mm 3.8 mm 4.2 mm 4.8 mm 40 mm 45 mm 50 mm 50 mm 56 mm 60 mm 63 mm 67 mm 71 mm 81 mm 0694 219 004 0694 219 006 0694 219 008 0694 219 010 0694 219 012 0694 219 016 0694 219 020 0694 219 025 0694 219 031 0694 219 037 1 1 1 1 1 1 1 1 1 1 Assignment of conical countersink to screw standards Countersink diameter CL01 7507030811, Rev: 0.63, State: 30. 09. 2022 4.3 mm 6.3 mm 8.3 mm 10.4 mm 12.4 mm 16.5 mm 20.5 mm 25 mm 31 mm 37 mm For countersunk head screws DIN EN ISO 10642 (formerly DIN 7991) M2 M3 M4 M5 M6 M8 M10, M12 M16 M20 For countersunk head screws DIN EN ISO 2009, 2010, 7046, 7047 (formerly DIN 963,964,965,966) M2 M3 M4, M5 M6 M8 M10 M12 M16

Cutting values for conical countersink EU HSCo 90 DIN 335 C For dia. 4.3 - 12.4 Material designation General structural steels Unalloyed heat-treated steels Alloyed heat-treated steels Nitriding steels Tool steels High-speed steels Cast iron Nodular graphite and malleable iron Chilled cast iron Stainless steels, sulphurated Stainless steels, austenitic Stainless steels, martensitic Titanium and titanium alloys Special alloys Hardox Spring steels Aluminium and aluminium alloys Wrought aluminium alloys Cast aluminium alloys 10% Si Cast aluminium alloys 10% Si Magnesium alloys Copper, low-alloy Brass, short-chipping Brass, long-chipping Bronze, short-chipping Bronze, long-chipping Plastics CL01 7507030811, Rev: 0.63, State: 30. 09. 2022 For dia. 16.5 - 37 Material designation General structural steels Unalloyed heat-treated steels Alloyed heat-treated steels Nitriding steels Tensile strength vc 500 N/mm2 1000 N/mm2 700 N/mm2 850 N/mm2 1000 N/mm2 1000 N/mm2 1400 N/mm2 1000 N/mm2 1400 N/mm2 850 N/mm2 1400 N/mm2 1400 N/mm2 240 HB 350 HB 240 HB 350 HB 350 HB 900 N/mm2 1100 N/mm2 1200 N/mm2 850 N/mm2 1400 N/mm2 1600 N/mm2 Hardox 400 - 500, XAR 320, XAR 400 350 HB 400 N/mm2 650 N/mm2 600 N/mm2 600 N/mm2 400 N/mm2 500 N/mm2 600 N/mm2 600 N/mm2 600 N/mm2 850 N/mm2 850 N/mm2 1000 N/mm2 150 N/mm2 41 39 38 38 31 31 12 31 12 31 12 12 19 17 17 17 12 8 8 8 8 8 6 4 8 70 50 30 20 70 30 65 40 65 65 40 40 30 Tensile strength vc 500 N/mm2 1000 N/mm2 700 N/mm2 850 N/mm2 1000 N/mm2 1000 N/mm2 1400 N/mm2 1000 N/mm2 1400 N/mm2 41 39 38 38 31 31 12 31 12 Dia. 4.3 0,110 0,060 0,110 0,110 0,060 0,110 0,060 0,060 0,030 0,060 0,030 0,030 0,110 0,110 0,110 0,110 0,030 0,060 0,030 0,030 0,060 0,030 0,060 0,030 0,140 0,140 0,110 0,110 0,140 0,140 0,140 0,140 0,140 0,140 0,140 0,140 0,140 Dia. 6.3 0,120 0,070 0,120 0,120 0,070 0,120 0,070 0,070 0,040 0,070 0,040 0,040 0,120 0,120 0,120 0,120 0,040 0,068 0,040 0,040 0,070 0,040 0,070 0,070 0,040 0,150 0,150 0,120 0,120 0,150 0,150 0,150 0,150 0,150 0,150 0,150 0,150 0,150 Dia. 16.5 Dia. 20.5 0,170 0,180 0,110 0,130 0,170 0,180 0,170 0,180 0,110 0,130 0,170 0,180 0,110 0,130 0,110 0,130 0,070 0,080 f Dia. 8.3 0,130 0,080 0,130 0,130 0,080 0,130 0,080 0,080 0,050 0,080 0,050 0,050 0,130 0,130 0,130 0,130 0,050 0,081 0,050 0,050 0,080 0,050 0,080 0,080 0,050 0,162 0,162 0,130 0,130 0,160 0,160 0,160 0,160 0,160 0,160 0,160 0,160 0,160 f Dia. 25 0,210 0,150 0,210 0,210 0,150 0,210 0,150 0,150 0,090 0,135 0,090 0,140 0,135 0,090 0,140 0,090 0,090 0,060 0,090 0,060 0,060 0,140 0,140 0,140 0,140 0,060 0,090 0,060 0,060 0,090 0,060 0,090 0,080 0,060 0,170 0,170 0,140 0,140 0,170 0,170 0,170 0,170 0,170 0,170 0,170 0,170 0,170 0,150 0,100 0,150 0,150 0,100 0,150 0,100 0,100 0,060 0,100 0,060 0,060 0,150 0,150 0,150 0,150 0,060 0,100 0,060 0,060 0,100 0,060 0,100 0,090 0,060 0,190 0,190 0,150 0,150 0,190 0,190 0,190 0,190 0,190 0,190 0,190 0,190 0,190 Dia. 31 Dia. 37 0,240 0,270 0,170 0,190 0,240 0,270 0,240 0,270 0,170 0,190 0,240 0,270 0,170 0,190 0,170 0,190 0,120 0,150

For dia. 16.5 - 37 Material designation Tool steels High-speed steels Cast iron Nodular graphite and malleable iron Chilled cast iron Stainless steels, sulphurated Stainless steels, austenitic Stainless steels, martensitic Titanium and titanium alloys Special alloys Hardox Spring steels Aluminium and aluminium alloys Wrought aluminium alloys Cast aluminium alloys 10% Si Cast aluminium alloys 10% Si Magnesium alloys Copper, low-alloy Brass, short-chipping Brass, long-chipping Bronze, short-chipping Bronze, long-chipping Plastics Tensile strength vc 850 N/mm2 1400 N/mm2 1400 N/mm2 240 HB 350 HB 240 HB 350 HB 350 HB 900 N/mm2 1100 N/mm2 1200 N/mm2 850 N/mm2 1400 N/mm2 1600 N/mm2 Hardox 400 - 500, XAR 320, XAR 400 350 HB 400 N/mm2 650 N/mm2 600 N/mm2 600 N/mm2 400 N/mm2 500 N/mm2 600 N/mm2 600 N/mm2 600 N/mm2 850 N/mm2 850 N/mm2 1000 N/mm2 150 N/mm2 31 12 12 19 17 17 17 12 8 8 8 8 8 6 4 8 70 50 30 20 70 30 65 40 65 65 40 40 30 Dia. 16.5 Dia. 20.5 0,110 0,130 0,070 0,080 0,070 0,080 0,170 0,180 0,170 0,180 0,170 0,180 0,170 0,180 0,070 0,080 0,110 0,130 0,070 0,080 0,070 0,080 0,110 0,130 0,070 0,080 0,110 0,130 0,090 0,110 0,070 0,080 0,210 0,230 0,210 0,230 0,170 0,180 0,170 0,180 0,210 0,230 0,210 0,230 0,210 0,230 0,210 0,230 0,210 0,230 0,210 0,230 0,210 0,230 0,210 0,230 0,210 0,230 f Dia. 25 0,150 0,090 0,090 0,210 0,210 0,210 0,210 0,090 0,150 0,090 0,090 0,150 0,090 0,150 0,140 0,090 0,260 0,260 0,210 0,210 0,260 0,260 0,260 0,260 0,260 0,260 0,260 0,260 0,260 Dia. 31 Dia. 37 0,170 0,190 0,120 0,150 0,120 0,150 0,240 0,270 0,240 0,270 0,240 0,270 0,240 0,270 0,120 0,150 0,170 0,190 0,120 0,150 0,120 0,150 0,170 0,190 0,120 0,150 0,170 0,190 0,160 0,120 0,150 0,300 0,340 0,300 0,340 0,240 0,270 0,240 0,270 0,300 0,340 0,300 0,340 0,300 0,340 0,300 0,340 0,300 0,340 0,300 0,340 0,300 0,340 0,300 0,340 0,300 0,340 Legend vc cutting speed [m/min] f feed (mm/r) The suggested cutting values are reference values and must be adapted to the respective conditions. CL01 7507030811, Rev: 0.63, State: 30. 09. 2022 Details/Application Comparison of standard conical countersink vs. EU conical countersink ##keep##

CL01 7507030811, Rev: 0.63, State: 30. 09. 2022 Related products Drilling and cutting foam CUT COOL Cutting and drilling oil CUT COOL Perfect Drilling and cutting paste Cut and Cool Perfect Art. no. 0893 050 007 0893 050 008 0893 050 010

CL01_7507030811, Rev: 0.63, State: 30. 09. 2022 Spot-facer diameter (d1) Shaft diameter (d2) Tip diameter (d3) Length (l1) Art. no. P. Qty. 4.3 mm 4 mm 1.3 mm 40 mm 0694 219 004 1 6.3 mm 5 mm 1.5 mm 45 mm 0694 219 006 1 8.3 mm 6 mm 2 mm 50 mm 0694 219 008 1 10.4 mm 6 mm 2.5 mm 50 mm 0694 219 010 1 12.4 mm 8 mm 2.8 mm 56 mm 0694 219 012 1 16.5 mm 10 mm 3.2 mm 60 mm 0694 219 016 1

Related Documents:

Fin – Input flow rate of the tank F out – Output flow rate of the tank H - Total height of the conical tank. R - Top radius of the conical tank h - Nominal level of the tank r - Radius at nominal level Fig3. Mathematical modeling of a conical tank The area of the conical tank is given by (3.1) R

drainage, especially for viscous liquids. Control of conical tank is a challenging problem due to its constantly changing cross section. The process taken up for study is to control the level in a conical tank [2]. Fig. 4 Conical Tank Level Process . The conical

variable. And level of conical tank is a control variable[3]. This can be achieved by controlling the input flow of the conical tank. Fin Fig2. Schematic diagram of conical tank Process operating Parameters are, Fin - Input flow rate of the tank F out - Output flow rate of the tank H - Total height of the conical tank.

CFRP - Diamond Coated, Carbon Fiber - Reinforced Polymer 3201 - CFRP Comp Ruffer - Semi Finish 3202 - CFRP Comp Finisher 3203 - CFRP Herringbone Finisher Carbide Common Shank Drill 3xD -AlTiN 11001 - Carbide Countersink Uncoated 11003 - Carbide Countersink 3 Flute - Uncoated 11006 - Carbide Countersink 6 Flute - Uncoated Carbide Common Shank Drill 5xD

ZEPHYR T O O L G R O U P R ZEPHYR TOOL GROUP 201 Hindry Avenue Inglewood, CA 90301 Tel. 310-410-4907 · Email: sales@zephyrtoolgroup.com · zephyrtoolgroup.com Page B6 06/15. ZT355, ZT357, ZT358 Series Long Travel Microstop Countersink Cages MICRO-STOP OVERALL INCHES OF

The mathematical model of conical tank is obtained using first principle is implemented by using equation and MATLAB/Simulink. The Simulink model of conical tank system is shown in fig.8. The system behavioris analyzed by using the step response model of conical tank system.5 b Step Sc

Elliptical Conical Tank 10 11 G/ 3 827 L h:\1 manufacturingElliptical Conical Tank 1030 (877) 283-2400 sales@sonomastone.com www.concretewinetanks.com 1911 CONICAL ELLIPTICAL 1,011 gal / 5,164 ltr / 38hl Some items shown here may be optional and not included. Refer to your order. 41 2" 11

bit more money each day. It will work on any index, instrument or currency pair. If you can have a chart up on your computer screen, you can look for this strategy. It works on all timeframes as well – one and two minute’s right up to daily and weekly charts. I have been using the strategy for the past 5 years, and it does work, simple as that! Just a quick point, this eBook is free to .