Parts And Instruction Manual 747 Wide Area Carpet Vacuum . - Minuteman
Parts and Instruction Manual 747 Wide Area Carpet Vacuum Battery Power
This manual is furnished with each new MINUTEMAN 747 Wide Area Vacuum. This provides the necessary operating and preventive maintenance instructions. Operators must read and understand this manual before operating or servicing this machine. This machine was designed to give you excellent performance and efficiency. For best results and minimal cost, please follow the general guidelines below: Operate the machine with reasonable care. Follow the manufacturers suggested maintenance instructions as provided in this booklet. Use original Minuteman supplied parts. Technical Specifications Model Model No. 747 MC827854 Height (retracted) Length (retracted) Width Bristle width Volume flow rate Brush diameter Brush bristle Bag volume Filter area Hose diameter Motor Wheel diameter (main) Wheel diameter (casters) Weight (without batteries) 24” (61 cm) 37¾” (96 cm) 29½” (75 cm) 26½” (67 cm) 200 CFM (340 m³/hr) 4” (10 cm) Conductive Nylon 9 ft³ (.25 m³) 19 ft² (1.75 m²) 5” (13 cm) ¾HP (.6 kW), PM, 24VDC, 16” (41 cm) 4” (10 cm) 154 lbs (70 kg) Parts and Instruction Manual
Table of Contents Main Assembly Bill of Material . 4 Main Assembly I . 5 Main Assembly II . 6 Main Assembly III . 7 Brush Assembly . 8 Fan Assembly . 9 Optional Accessories . 10 Minuteman International Made Simple Commercial Limited Warranty . 11 Parts and Instruction Manual
Parts and Instruction Manual Page 1
Parts and Instruction Manual Page 2
Parts and Instruction Manual Page 3
Main Assembly Bill of Material ITEM 2 3 4 5 6 7 8 9 10 11 12 13 14 16 17 19 20 21 22 23 25 27 28 29 31 32 33 34 35 36 37 39 40 41 42 43 44 45 46 48 49 50 52 53 54 56 57 58 59 61 62 64 65 66 67 PART NO. 601163 710195 710207 710310 711599 710755 711016 711115 711124 711221 712565 711228 711231 710776 713045 711359 711366 711379 833929 711435 711506 711539 711544 711575 712300 711553 711515 712565 712667 712810 712811 712822 712900 712908 715384 715029 740097 740164-1 785208-1 808706 833859 808720 808737 808744 808756 808760 808803 808829 809444 760428 760429 711910 827855PTD 827871 827873 QTY. 1 4 3 1 1 3 2 1 4 2 2 8 4 2 1 2 2 16 1 4 8 4 8 5 2 20 2 2 4 10 5 4 1 12 1 1 1 1 1 1 1 1 3 2 4 1 2 1 2 1 1 2 1 2 1 DESCRIPTION SWITCH-20A125V LATCHING PB SCR-MC 5/16-18 X .50 ZINC SCR-MC 6-32 X .87 ZINC SCR-MC 6-32 X 1.5 ZINC WSR-FLT .187 X 1.00 X .06 USE 711202 INSTEAD; SC 1/4-20 X .50 HEX Z SK 1/4-20 X .50 SCR-ST-A 8 X .62 ZINC SCR-ST-B 10 X .37 NI BLT-HH 1/4-20 X 2.25 SCR-MC 1/4-20 X .62 SS BLT-HH 5/16-18 X .75 STL ZINC BLT-HH 5/16-18 X 1.25 SCR-MC 5/16 X 2.50 ZINC BLT-HH 3/8-16 X 1.75 #5 NUT-ACORN 5/16-18BR NIPL NUT-WING 5/16-18 ST PL NUT-FLANGED WIZZ 5/16-18 SPRING-COMP .063 X .54 X 1.25 NUT-FLANGED WIZZ 6-32 WSR-FLT 5/16 (NARROW) ST PL WSR-EXT LOCK 3/8 WSR-HELICAL 1/4 WSR-FLT .31 X .75 X .06 STL WSR #8 BR NIPL WSR-INT LOCK #10 WSR-FLT .406 X .812 X .0625 SCR-MC 1/4-20 X .62 SS NUT-NYLOC 1/4-20 SS SCR-MC 10-24 X .37 ZINC SCR-MC 10-24 X .50 STZ RD HD SCR-MC 10-24 X .50 SS TR NUT-HEX 10-24 STPL NUT-FLANGED WIZZ 10-24 DECAL-MMAN 1.4 X 9.68 DK GRY DECAL-NAME PLATE SERIAL CONNECTOR-SB50 RED HOUSING ONLY JUMPER CABLE ASSY, RED 4G 12" DRIVE MTR .75HP 24V W/TERMINLS BLOWER HOSE BRUSH PLATE 747 14GA BUMPER CLIP BUMPER CLIP CLAMP-HOSE RET RING-E TYPE .62 5133-62 HANDLE BRACKET BRKT-HOLD DOWN WHEEL-TRUCK CLIP-CORD LATCH ONLY-37-11-071-10 LATCH-KEEPER 372507117 RIVET-POP 747 MAINFRAME PAINTED WHEEL MOUNT MOTOR ITEM 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 109 110 111 112 113 114 115 116 117 118 119 120 121 122 PART NO. 827876 827877 827878 827880 827890 830721 827905 827906 827910 827911 827912 827919 827925 740132 828378 828596 740302 828893 829182 829184 829185 829186 829187 829202 829205 829289 829290 831026 809161 740241 829296 711620 829299 829310 830301 831641 830902 830903 832204 808759CTD 833472 833695 833928 833926 833699 715506 833927 833725 833762 833763 710581 711717 832448 715504 QTY. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 6 1 2 1 2 1 2 1 1 1 1 1 1 3 4 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 DESCRIPTION BELT-V 6 RIB POLY PULLEY MOTOR BELT-V 4 RIB POLY FAN ASSY AV747 BOX SWITCH BRUSH-STATIC FREE ASM COVER, 747 BATT HINGE-BASE COVER HINGE-COVER BAFFLE CONNECTOR-W/INSERT TERM CABLE ASY POSITIVE INSULATOR (PLASTIC) DECAL GROMMET 14G BLACK 13.50" B 1 RIVET BUMPER ASSY CASTER PIVOT BATTERY TRAY CASTER BRKT SHAFT AXLE REAR 747 BRKT-HANDLE LEAD ASSY LEAD ASSY BLACK WIRE LEAD ASY WIRE ASY 12GA BLK 18" RELAY-24V 50AMP SPNO PIN-ROLL 1/4 X 7/8 PIN-ROLL .25 X 1.25 CASTER-SWIVEL SPRING-TORSION CABLE ASY NEG BAG, CLOTH 724/747 2-ZIPR BATTERY BOX BATTERY STRAP PLUG HOLE HANDLE 747 PVC COATED END CAP 747 COVER PLATE 747 18GA HANDLE, ADJUST NEW STYLE HANDLE MOUNT NEW STYLE GASKET HANDLE 747 DECAL-747 HEIGHT ADJ ADJUSTING PLATE NEW STYL 3-16 CLIP-T 8G RED 13.25 8G BLACK 20.00" SCR-MC 1/4-20 X .75 ZINC RET RING-E EXT .37 SHOULDER SCREW DECAL-747 DISENGAGE Diagrams for part numbers listed can be found on pages 5, 6, and 7 Parts and Instruction Manual Page 4
Main Assembly I Parts and Instruction Manual Page 5
Main Assembly II Parts and Instruction Manual Page 6
Main Assembly III Parts and Instruction Manual Page 7
Brush Assembly ITEM 1 2 3 4 5 6 7 8 9 11 12 ** PART NO. 711161 711162 711553 712318 828927 827894 827896 827897 827898 828145 828588 830721 Parts and Instruction Manual QTY. 6 6 12 2 1 2 1 1 1 2 2 DESCRIPTION SCR - HI-LO #10-16 X 3/4, PAN HD. #10 SCR-HI/LO #10 X 1 1/2 ZINC WSR-INT LOCK #10 WSR-FLT .75 X 1.12 X .12 PL BRUSH-CORE STATIC FREE CUP BEARING COVER BEARING SHAFT BRUSH PULLEY BRUSH RET RING BEARING-.500 X 1.125 X .312 BRUSH ASSEMBLY COMPLETE Page 8
Fan Assembly ITEM 1 2 3 4 5 6 7 8 10 13 14 15 18 ** PART NO. 827881 827883 808727BAL 801535 808733 808734 829183 808821 829285PLT 711206 711544 711015 827885 827880 Parts and Instruction Manual QTY. 1 1 1 2 2 1 1 1 1 8 8 2 1 DESCRIPTION HOUSING FAN BOTTOM MCH HOUSING FAN TOP MCH BLOWER FAN BAL 724/747 BEARING-MOTOR .6693 X 1.5748 X .4724 RET RING FAN PULLEY SHAFT BEARING KEY-SQ .187 X 1 SPACER-.25 X .875 X .687 PLATED BLT-HH 1/4-20 X .87 STL ZINC WSR-HELICAL 1/4 SK 10-24 X .37 GASKET HSG FAN ASSEMBLY COMPLETE Page 9
Optional Accessories Parts and Instruction Manual Page 10
Minuteman International Made Simple Commercial Limited Warranty Minuteman International, Inc. warrants to the original purchaser/user that the product is free from defects in workmanship and materials under normal use. Minuteman will, at its option, repair or replace without charge, parts that fail under normal use and service when operated and maintained in accordance with the applicable operation and instruction manuals. All warranty claims must be submitted through and approved by factory authorized repair stations. This warranty does not apply to normal wear, or to items whose life is dependent on their use and care, such as belts, cords, switches, hoses, rubber parts, electrical motor components or adjustments. Parts not manufactured by Minuteman are covered by and subject to the warranties and/or guarantees of their manufacturers. Please contact Minuteman for procedures in warranty claims against these manufacturers. Special warning to purchaser -- Use of replacement filters and/or prefilters not manufactured by Minuteman or its designated licensees, will void all warranties expressed or implied. A potential health hazard exits without original equipment replacement. All warranted items become the sole property of Minuteman or its original manufacturer, whichever the case may be. Minuteman disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose. Minuteman assumes no responsibility for any special, incidental or consequential damages. This limited warranty is applicable only in the U.S.A. and Canada, and is extended only to the original user/purchaser of this product. Customers outside the U.S.A. and Canada should contact their local distributor for export warranty policies. Minuteman is not responsible for costs or repairs performed by persons other than those specifically authorized by Minuteman. This warranty does not apply to damage from transportation, alterations by unauthorized persons, misuse or abuse of the equipment, use of non-compatible chemicals, or damage to property, or loss of income due to malfunctions of the product. If a difficulty develops with this machine, you should contact the dealer from whom it was purchased. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitation of special, incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you. Cord Electric Group . Three years parts, two years labor, ninety days travel (Not to exceed two hours) Exceptions . Port-A-Scrub, one year parts, six months labor MPV 13, one year parts MPV 14 and 18, two years parts, one year labor RapidAir blower, one year parts, one year labor Explosion-Proof Vacuum, one year parts, one year labor Pneumatic Vacuums, three years parts, one year labor EX 12 and EX12H, one year parts, one year labor Battery Operated Group . Three years parts, two years labor, ninety days travel (Not to exceed two hours) Exceptions Sweepers, one year parts, one year labor, ninety days travel (Not to exceed two hours) Internal Combustion Group .One year parts, one year labor, ninety day travel (Not to exceed two hours) Replacement Parts .Ninety days Batteries .0-3 months replacement, 4-12 months pro-rate Polypropylene Plastic Tanks Ten years, no additional labor 111 South Rohlwing Road · Addison, Illinois 60101 USA Phone 630- 627-6900 · Fax 630- 627-1130 E-Mail, www.minutemanintl.com A Member of the Hako Group 987838 Rev A 10/07
Minuteman International Made Simple Commercial Limited Warranty 111 South Rohlwing Road · Addison, I llinois 60101 USA Phone 630- 627-6900 · Fax 630- 627-1130 E-Mail, www.minutemanintl.com A Member of the Hako Group 987838 Rev A 10/07. Title: 987838 - 747 Wide Area Vac Battery.pmd
787. For example, the 747‑8 and 747‑400 have the same type rating and ground‑ support equipment. Flight handling characteristics of the 747‑8 are also very similar to the 747‑400. Figure 1: 747 model comparison The primary external differences between the 747‑8 and the 747‑400 are in wingspan and fuselage length.
747 Maintenance Manual, Chap. 29, Section 11, Subject 00, the ADPs can be operated for 15 minutes without fuel in the tanks. PDF Aircraft Maintenance Manual Boeing 747 Maintenance Manual Boeing 747 Company manual development, Vendor Management. manual - title boeing 747 400 aircraft maintenance
Jan 14, 2002 · University of Texas at El Paso El Paso, TX 79968 (915) 747-6588 FAX: (915) 747-5505 e-mail: msmithey @miners.utep.edu Susanne E. Green, M.A. Public Policy Research Center University of Texas at El Paso El Paso, TX 79968 (915) 747-6531 (915) 747-5505 e-mail: sgreenll @elp.rr.co
5 . 5 . Osceola Swimming Pool Pool / 402-747-8979 City Office / 402-747-3411 . Osceola Senior Center 402-747-8227 . Osceola Cemetery Board David Udey, President 402-747-5471
PMDG 747-400 sections of the Introduction Manual, please make sure you do so before proceeding. The sim needs to be properly configured for the airplane to function correctly and it is assumed that you understand the PMDG clickspot and mouse button methodology before proceeding. This tutorial also assumes the use of the default PMDG 747-400 Queen
It provides characteristics of the Boeing Model 747-8F (Freighter) and 747-8 (Intercontinental passenger) airplanes for airport planners, operators, airlines, architectural and engineering consultant organizations, and other interested industry agencies. Airplane changes and available options may alter model characteristics.
original nickname, " e 0 Airtel Zambia Thematic Research Note Flying Airtel Zambia on Data & VAS, Partnerships and Enterprise Business Picture: A "red and white" Boeing 747-8 that matches with colours on the "Airtel logo" The Boeing 747-8 is the newest version of the Boeing 747.
commercial airplane, Boeing 747-400 is analyzed. First of all an approach to the stability concept is done. Then by the help of Newton’s Second Law, equations of motion are derived, subsequently longitudinal stability equations are found and linearized. Afterwards the equations are used for the stability analysis of Boeing 747-400. In this .
