Synergy Unit 9 - 3182 Orlando Drive Energy - Intellivex
Synergy Energy Inc. Unit 9 - 3182 Orlando Drive Mississauga, Ontario, L4V 1R5, Canada Synergy Energy Toll free tel: 1-866-866-5822 Toll free fax: 1-866-866-5716 Transformers for the 21st century info@SynergyEnergyInc.com www.SynergyEnergyInc.com High Efficiency: HET.K HS HTT HPS HEST HET.L HET Electronic Load Rated: HET.K HS HTT HPS HTT2 VFDS CTT HS HTT HPS HTT2 VFDS CTT Harmonic Mitigating: Special: Synergy Energy Inc. All Rights Reserved. CTT.A 2010 Edition
Table of Contents To view a specific section of the catalogue, please click on the related following topic: Profile .3 Catalogue Update Request .4 Fact Sheet .5 Compliance .7 Product Selection Guide .9 Products .10 HPS - Harmonic Premium Solution .11 HTT - Harmonic Treating Transformer .13 HS - Harmonic Solution .15 HTT2 - Harmonic Treating Transformer 2 Two Outputs .17 CTT - Current Treating Transformer .19 VFDS - Variable Frequency Drive Solution .21 HET - High Efficiency Transformer .23 HET.K - High Efficiency Transformer K Rated .25 HET.L - High Efficiency Transformer Low Cost .27 HEST - High Efficiency Single-phase Transformer .29 CTT.A - Special .31 SmartSkid .33 Warranty & Liability.34 Terms & Conditions - Canada .35 Terms & Conditions - USA .36 Products Return Policy .37 WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716
Profile With emphasis on High Efficiency (NEMA-TP1) and Harmonics Mitigation criteria, Synergy Energy Inc. is a premier designer and manufacturer of dry-type, copper wound Transformers for the 21st Century. The products offered by Synergy Energy Inc. are designed with high engineering expertise and the latest computer software. While in production, each and every transformer goes through several rigorous quality controls and a unique barcode controlled production tracking system eliminate all possible human errors to ensure 100% design compliance. Building towards its mission To Save Energy and Improve Power Quality, Synergy Energy Inc. has dedicated both its technical expertise and manufacturing capabilities towards introducing a complete line of High Efficiency and Harmonic Mitigating products that meet and exceed the efficiency standards and improve the Power Quality of their customers' electrical systems. High efficiency is an integral part of Synergy Energy Inc.’s designs. Synergy Energy Inc. is an Energy Star partner and capable of manufacturing transformers up to 5000 kVA and 25 kV in two New Jersey (USA) and Ontario (Canada) plants. iN TE R TE K CM SmartSkid is a Registered Trade Mark of Synergy Energy Inc. VE R I Fi ED iN ENERGY PERFORMANCE VERIFIED RENDEMENT ENERGETIQUE VERIFIE TE R TE K CM C US LI S T ED The products offered by Synergy Energy Inc. are UL, INTERTEK and CE approved. They meet or exceed the applicable NEMA, ANSI, IEEE, CSA and UL standards and are backed with one of the longest linearly distributed pro-rated warranties in the industry. Customized transformers and products designed by Synergy Energy Inc. are all wound with Copper, brazed internally and have vibration dampers between the core and enclosure. To increase the product flexibility, options such as lug kits, various enclosure types and colors, ceiling mount, digital voltmeter, over-temperature alarm, ground bar, thermal switches, over-current alarm, ultra quiet, and electrostatic shields are offered as options. Moreover, with the unparalleled design and introduction of the innovative SmartSkid , and its inclusion as an integrated component of all Standard Transformers, Synergy Energy Inc. has further overcome the safety and installation challenges of securely and easily transferring, lifting, and mounting the units. In partnership with our clients and their technical teams, it is our core philosophy to continually embark on new challenges in the fields of design and production of dry type Transformers and Reactors, and introduce reliable and cost effective solutions. WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Click for Table of Contents
Catalogue Update Request To request receiving the electronic copy of the latest and updated versions of Synergy Energy Inc catalogue on a CD, please either fax this completed form to the following Toll Free Number or contact us via e-mail: Toll Free: 1-866-866-5716 Please Print Clearly: Date: Full Name: Company: Title: e-mail: Website: Street No., Street Name, Unit No. Address: City/Town/County, Province/State Postal Code/Zip Code, Country Please check, If you would wish to receive product updates via e-mail. Disclaimer: The contact information obtained herewith is merely for the purpose of processing your inquiry by Synergy Energy Inc. and will not be shared and/or communicated with any third party firm and/or individuals. WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Click for Table of Contents
Fact Sheet Wave Shape with Harmonics 0 180 360 540 Wave Angle In Degrees 720 Nature of harmonics: During the last three decades we have moved away from linear loads such as electrical motors with mechanical speed control, and heaters towards non-linear loads such as computers, printers, and light dimmers. Therefore, attention should be given to the transformer on the load line of an electrical system. Any distortions in the voltage or current wave cause harmonics. Harmonics are multiples of base frequency (base frequency in North America is 60 Hz) that when added together, form the actual wave form. Depending on the amount of different harmonics present in the electrical system, the ideal sinusoidal wave can take different shapes. Sources of harmonics: Today's loads draw current differently compared to the loads of the past. Equipment such as computers, monitors, copiers, fax machines, scanners, and printers were not as frequently used in past decades. In today's industries, three phase Non-linear loads such as Variable Frequency Drives are widely used as well. Also, manufacturers are taking advantage of robots, plasma cutters and other electronic and computer controlled equipment that is relatively new to the industry. All of these loads create harmonics with damaging effects and need to be addressed accordingly. Common types of harmonics: The most dominants types of harmonics that have the greatest magnitude and cause the most damage are 3rd, 5th and 7th. Single-phase electronic loads such as computers, monitors, printers, copiers, scanners, and fax machines have a wide spectrum in these harmonics. Three phase loads such as Variable Frequency Drives and manufacturing robots create mostly 5th and 7th harmonics, if they are 6 pulse drives, and otherwise 11th and 13th harmonics, if they are of 12 pulse drives nature. Effects of harmonics: Different harmonics have varying effects on multiple parts of the electrical system. They can cause equipment to malfunction and/or fail, transformers to overheat, and a reduction in transformer capacity (leading to electrical infrastructure over sizing). When harmonics are applied to transformers, they can easily overheat and despite their ruggedness burn long before they reach their nominal capacities. A study conducted by IEEE 1996 shows harmonics can cause a transformer to reach its maximum temperature rise when it is loaded to just 50% of its capacity. WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Click for Table of Contents
Fact Sheet Wave Shape without Harmonics 0 180 360 540 Wave Angle In Degrees 720 Third harmonics and its odd multiples get trapped in the delta primary of a standard Delta-Wye transformer causing it to overheat and reduce its efficiency. The extra heat will also require extra environmental cooling that will increase the electrical consumption. Fifth and seventh harmonics pass through the transformer to the utility grid causing the reduction of Power Factor and an increase in utility bill. Solution: Transformers are the most important infrastructure of any electrical system and are required to be sized and applied with full attention to harmonic creating loads. Our Unsurpassed Solution: By considering the K load factor, Synergy Energy Inc. designs and manufactures the harmonic mitigating transformers, which are capable of mitigating the 3rd, 5th, 7th, 9th, 13th and 15th harmonics at the system level. SmartSkid is a Registered Trade Mark of Synergy Energy Inc. Harmonic mitigating capabilities of transformers designed and manufactured by Synergy Energy Inc. makes them facilitators for IEEE 519 conformity. Furthermore, the transformers meet the low Audible Noise levels of NEMA and are designed, manufactured, and tested in accordance to all applicable standards of UL, CSA, IEEE, ANSI, and NEMA. Transformers designed and manufactured by Synergy Energy Inc. meet and exceed the required efficiency levels of NEMA TP-1, CSA 802.2 and US Department of Energy (DOE) CSL-3 standards. Furthermore, the efficiency compliance with NEMA and CSA standards of the transformers are verified by the third party verification body, Intertek, one of the most trusted test organizations in the world. Verified products carry the Intertek Efficiency Verification logo together with the related Verification number. With numerous optional features such as lug kits, various enclosure types and colors, ceiling and wall mount brackets and hardware, digital voltmeter with selector switch, audio/visual over-temperature alarm, ground busbar, phase loss alarm, thermal sensors, over-current alarm, various temperature rise & frequency, ultra quiet, capacitor life indicator, THD indicator and electrostatic shields are offered as options, transformers and products designed and manufactured by Synergy Energy Inc. are among the most selected and recommended ones by technical experts in the industry. The finished products are shipped in a shrink-wrapped, gray NEMA 3R enclosure with corner protectors on our unique SmartSkid for safe and effortless transportation and installation. WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Click for Table of Contents
Compliance Quality & Safety Compliance: Considering the hazardous result of a faulty product, the importance of compliance of a device, which is designed and manufactured for electrical regulating application is prominent. In addition to the self regulating quality and compliance principles, which are available to manufacturer of such products as part of the best manufacturing practice, it is becoming more apparent that independent third party verification is extremely important. In adhering to the internationally recognized quality principles, where applicable, products manufactured by Synergy Energy Inc. bear the following Quality and Safety compliance markings: CE Marking: The CE marking (also known as CE mark) is a mandatory conformity mark on many products placed on the single market in the European Economic Area (EEA). The CE marking certifies that a product has met EU consumer safety, health or environmental requirements. Furthermore, CE marking is a declaration by the manufacturer that the product meets all the appropriate provisions of the relevant legislation implementing certain European Directives. ETL Marking: iN TE R TE K CM VE R I Fi ED iN ENERGY PERFORMANCE VERIFIED RENDEMENT ENERGETIQUE VERIFIE TE R TE K CM C US LI S T ED A product bearing the ETL Listed Mark is determined to have met the minimum requirements of prescribed product safety standards. Specifically, the mark indicates that the manufacturer's production site conforms to a range of compliance measures and is subject to periodic follow up inspections to verify continued conformance. The verification is conducted by an independent Nationally Recognized Testing Laboratory (NRTL), such as Intertek, which is required to be recognized by the Occupational Safety and Health Administration (OSHA). UL Marking: Underwriters Laboratories Inc. (UL) is an independent product safety certification organization. A manufacturer of a UL-certified product must demonstrate compliance with the appropriate safety requirements, many of which are developed by UL. A manufacturer must also demonstrate that it has a program in place to ensure that each copy of the product complies with the appropriate requirements. UL conducts periodic, unannounced follow-up inspections at manufacturers' locations to check ongoing compliance. Product Tracking Process: 0000-ISO000-SE0000 In an effort to streamline the process of tracking a product from the initial point of sales to final shipment to the customer, Synergy Energy Inc. has developed a customized, unprecedented, and revolutionary Management Information System (MIS), which has been praised by both the quality verification bodies and its clients. WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Click for Table of Contents
Compliance Adapting a sophisticated bar-coding system, where printed labels are placed on both internal and external components of a products, has enabled Synergy Energy Inc. in implementing the most customized and rigorous product tracking system in the industry to verify all the following steps in real time, gather and store the corresponding technical and quality related information for both internal and external future sales, manufacturing, quality and audit references: Point of Sales and order entry. Release of the order to design team for development of the design specification Release of the order to manufacturing. Tracking all steps of the manufacturing such as winding, stacking, connection, final assembly, and shipping, where all corresponding related products are barcoded. Tracking all quality testing steps and producing the corresponding test results WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Click for Table of Contents
Product Selection Guide CTT Current Treating Transformer Harmonic Mitigating Variable Frequency Drive Solution HTT2 Harmonic Treating Transformer 2 Two Outputs HPS Harmonic Premium Solution HTT High Efficiency Products (Direct Replacement for Distribution Transformer) SmartSkid is a Registered Trade Mark of Synergy Energy Inc. Electronic Load Rated Products VFDS Harmonic Treating Transformer HS Harmonic Solution HET.K High Efficiency Transformer K Rated HET High Efficiency Transformer HET.L High Efficiency Transformer L Low Cost HEST High Efficiency Single-phase Transformer Three-phase Four-wire harmonic mitigating and Neutral Current reducing device, CTT is designed for parallel installation in the electrical system and it traps the third order harmonics by creating a low impedance pathway. High Efficiency device designed to mitigate 5th and 7th harmonics created by nonlinear load such as Variable Frequency Drives. It is an efficient, reliable, and long lasting electromagnetic based device. Reduction of the 5th and 7th harmonics provides cleaner voltage to the other equipment in the facility, and reduces equipment malfunction and failure. Highly advanced dual output transformer with extraordinary harmonic mitigating capabilities. HTT2 mitigates all the 3rd order harmonics together with 5th and 7th ones in its windings. Phase shifting technology combined with low zero sequence impedance and balanced output impedances enables HTT2 to efficiently and reliably mitigate the harmonics. Ultra High efficiency harmonic mitigating transformer specifically designed to deliver enhanced power quality by treating the harmonics in the electrical system that are generated by single phase non-linear loads. HPS treats 5th, 7th, 11th, and 13th harmonics at the system level. A three-phase isolation transformer capable of handling loads up to K30 without derating. HTT mitigates 3rd, 9th and all other third order harmonics in its secondary windings through Flux Cancellation technology and 5th, 7th, 11th and 13th harmonics through phase shifting at the system level. With small footprint and a great replacement for Delta-Wye transformers, one of the most economical solutions for harmonic problems. HS is designed to handle K-20 load profile and is capable of mitigating the 3rd, 5th, 7th, 9th and 15th harmonics at the system level. Three phase high efficiency isolation transformers derated to the K-rating levels specified by UL. Typical installation of HET.K would be where nonlinear loads are present. The required K-rating increases with increased amounts of Total Harmonic Distortion (THD) in the electrical system. As a replacement for standard Delta-Wye transformer, the Ultra High Efficiency HET is to reduce the operating cost of the facilities. It is the ideal transformer for supplying power to panels or equipment with high linear load concentration. A low cost solution for raising the overall efficiency of a facility, HET.L transformers delivers quiet and efficient power with short return on investment. While providing efficient power to single-phase loads, HEST improves the overall efficiency of the facility and returns the investment in a short period. With their low maximum temperature rise, HEST products run cooler than a standard single-phase transformer under similar load and condition. Common Features of Harmonic Mitigating & High Efficiency Products: Copper wound, Internally brazed, Vibration damper between core clamping brackets and enclosure, Insulation class 220 C, Natual Convection Cooling with Air (ANN), NEMA 3R Enclosure, 3rd party Intertek Efficiency Verification, and SmartSkid . WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Disclaimer: Strive for continuous improvement may result in modifications to the technical specifications without notice. Click for Table of Contents
Products Following pages are to introduce the list of Standard Key Features and encompass Optional Elements of the products, which are designed and manufactured by the Synergy Energy Inc. For additional Engineering and Technical details of the products, please do not hesitate to contact us. WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Disclaimer: Strive for continuous improvement may result in modifications to the technical specifications without notice. Click for Table of Contents
HPS is a Trade Mark of Synergy Energy Inc. HPS HPS (Harmonic Premium Solution) is an Ultra High efficiency harmonic mitigating transformer specifically designed to deliver enhanced power quality by treating the harmonics in the electrical system that are generated by single phase non-linear loads such as computers, monitors, printers, copiers, scanners, televisions, and electronic ballasts. When phase shifted, it treats 5th, 7th, 11th, and 13th harmonics at the system level. Harmonic mitigating capabilities of HPS makes it a great facilitator for IEEE 519 conformity. It is designed as a threephase isolation transformer capable of handling load profiles of up to K30 without derating. Astonishing high efficiency and low operating cost of HPS results in a quick return on investment. It will also improve the bottom line by reducing equipment malfunction, equipment failure, downtime, and scheduled equipment maintenance. Efficiency level of HPS easily exceeds the levels required by NEMA TP-1, CSA 802.206 and US DOE CSL-3 standards. The efficiency of HPS is third party verified by Intertek, one of the most trusted test organizations in the world. It also bears the Intertek efficiency logo together with the related verification number. HPS products are in line with KYOTO accord requirements for reduction of greenhouse gasses and carry the longest warranty in the industry. Similar to any other Synergy Energy Transformers, HPS has front access to all connection points (Primary, Secondary, Voltage Taps, Ground Lugs, Electrostatic Shields, etc). HPS accepts a wide variety of extra options. The standard version of HPS has a maximum temperature rise of 130 C with two, full width copper electrostatic shields and Six primary voltage taps (Two taps above and four taps bellow the nominal voltage). SmartSkid is a Registered Trade Mark of Synergy Energy Inc. The finished product is shipped in a shrink-wrapped, gray NEMA 3R enclosure with corner protectors on our unique SmartSkid for safe and effortless transportation and installation. For more information about SmartSkid and its advantages, please refer to the SmartSkid section of catalogue. Standard Features: Warranty: Efficiency: Type: 3rd Party Efficiency Verification: Cooling: Coils: Primary Taps: Temperature Rise: Neutral Rating: Insulation Class: Audible Noise Level: Vibration Dampers: Enclosure Type: Packaging: 50 years (Pro-Rated) Exceeds NEMA TP1, CSA 802.2-06 & CSL-3 Three Phase, Dry, Isolation, Common Core Intertek Air with Natural Convection (ANN) Copper, Internally Brazed 2x2.5% FCAN & 4x2.5% FCBN (Brazed) 130 C 200% of Line Current 220 C Per NEMA ST20 Between the core clamping brackets and the enclosure NEMA 3R SmartSkid iN TE R TE K CM VE R I Fi ED iN ENERGY PERFORMANCE VERIFIED RENDEMENT ENERGETIQUE VERIFIE TE R TE K CM C US LI S T ED WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Disclaimer: Strive for continuous improvement may result in modifications to the technical specifications without notice. Click for Table of Contents
HPS Model Number Creation: To create a model number, match the numbers to the corresponding Key Optional Features and reference the related abbreviations in the designated location as depicted below: HPS is a Trade Mark of Synergy Energy Inc. HPS- kVA - PS - PV - SV - TEMP - FRQ - SHLD - ENC - COL 1 2 3 4 5 6 7 8 9 10 Key Optional Features: Note: Options depicted in RED will increase the manufacturing cost of the product and its sales price. For further details, consult your local area representative or Synergy Energy Inc. 1 Product: HPS 2 Rating: 9 for 9 kVA up to 5000 for 5000 kVA 3 Phase Shift: Zero or 30 Degrees 4 Primary Voltage: Up to 25 kV (600 V and below are standard voltages at no extra charge) 5 Secondary Voltage: Up to 25 kV (600 V and below are standard voltages at no extra charge) 6 Temperature Rise: 130 for 130 C, 115 for 115 C and 80 for 80 C 7 Frequency: 60 for 60Hz, 50 for 50Hz 8 Electrostatic Shield: 2S for Two Shields, 3S for Three Shields 9 Enclosure: CC for NO Enclosure, N3R for NEMA 3R, N4 for NEMA 4 (Totally enclosed) 10 Enclosure Color: GRY for Gray, BLU for Royal Blue, RED for Red (Other colors are available) Example: HPS with 75 kVA Rating, Zero Degrees Phase Shift, 480 V Primary, 208/120 V Secondary, 130 C Temperature Rise, 60 Hz Frequency, 2 Electrostatic Shields, in Gray NEMA 3R Enclosure Model Number: HPS-75-0-480-208-130-60-2S-N3R-GRY Additional Options: The additional options available for the product are listed below. Additional options are not abbreviated in the part number of the product and should be listed separately at the time of order. Please note that some of these options may not be available depending on product specification. For complete details please refer to the related page in the "options" section of the catalogue. Lug Kit Digital Voltmeter Thermal Switches Ceiling Mount Ground Bar Ultra Quiet Over-Current Alarm Over-Temperature Alarm WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Disclaimer: Our strive for continuous improvement may result in modifications to the technical specifications without notice. Click for Table of Contents
HTT is a Trade Mark of Synergy Energy Inc. HTT HTT (Harmonic Treating Transformer) products are one of the most popular products amongst specifying engineers. HTT is ideally used in harmonic rich environment, where most of the load on the electrical system is nonlinear type such as computers, monitors, printers, copiers, scanners, televisions, and electronic ballasts. HTT is a three-phase isolation transformer capable of handling load profiles of up to K30 without derating. It mitigates 3rd, 9th and all other third order harmonics in its secondary windings through Flux Cancellation technology and 5th, 7th, 11th and 13th harmonics through phase shifting at the system level. HTT is a high efficiency transformer that exceeds the efficiency levels required by NEMA TP-1, CSA 802.2-06 and US DOE CSL-3 standards. The high efficiency of HTT is third party verified by Intertek, one of the most trusted test organizations in the world and bears the related logo and verification number. Similar to any other Synergy Energy transformers, HTT has front access to all its connection points (Primary, Secondary, Voltage Taps, Ground lugs, Electrostatic Shields, etc). HTT accepts a wide variety of extra options. The standard version of HTT has a maximum temperature rise of 130 C with Six primary voltage taps (Two taps above and four taps bellow the nominal primary voltage) and one full width copper electrostatic shield between the primary and secondary Windings. SmartSkid is a Registered Trade Mark of Synergy Energy Inc. The finished product is shipped in a shrink-wrapped, gray NEMA 3R enclosure with corner protectors on our unique SmartSkid for safe and effortless transportation and installation. For more information about SmartSkid and its advantages, please refer to the SmartSkid section of catalogue. Standard Features: Warranty: Efficiency: Type: 3rd Party Efficiency Verification: Cooling: Coils: Primary Taps: Temperature Rise: Neutral Rating: Insulation Class: Audible Noise Level: Vibration Dampers: Enclosure Type: Packaging: 40 years (Pro-Rated) Exceeds NEMA TP1, CSA 802.2-06 & CSL-3 Three Phase, Dry, Isolation, Common Core Intertek Air with Natural Convection (ANN) Copper, Internally Brazed 2x2.5% FCAN & 4x2.5% FCBN (Brazed) 130 C 200% of Line Current 220 C Per NEMA ST20 Between the core clamping brackets and the enclosure NEMA 3R SmartSkid iN TE R TE K CM VE R I Fi ED iN ENERGY PERFORMANCE VERIFIED RENDEMENT ENERGETIQUE VERIFIE TE R TE K CM C US LI S T ED WWW. SynergyEnergyInc . COM 1-866-866-5822 info@SynergyEnergyInc.com 1-866-866-5716 Disclaimer: Strive for continuous improvement may result in modifications to the technical specifications without notice. Click for Table of Contents
HTT Model Number Creation: To create a model number, match the numbers to the corresponding Key Optional Features and reference the related abbreviations in the designated location as depicted below: HTT is a Trade Mark of Synergy Energy Inc. HTT- kVA - PS - PV - SV - TEMP - FRQ - SHLD - ENC - COL 1 2 3 4 5 6 7 8 9 10 Key Optional Features: Note: Options depicted in RED will increase the manufacturing cost of the product and its sales price. For further details, consult your local area representative or Synergy Energy Inc. 1 Product: HTT 2 Rating: 9 for 9 kVA up to 5000 for 5000 kVA 3 Phase Shift: Zero or 30 Degrees 4 Primary Voltage: Up to 13800 V (600 V and below are standard voltages at no extra charge) 5 Secondary Voltage: Up to 13800 V (600 V and below are standard voltages at no extra charge) 6 Temperature Rise: 130 for 130 C, 115 for 115 C, 80 for 80 C and 65 for 65 C 7 Frequency: 60 for 60Hz, 50 for 50Hz 8 Electrostatic Shield: 1S for One Shield, 2S for Two Shields, 3S for Three Shields 9 Enclosure: CC for NO Enclosure, N3R for NEMA 3R, N4 for NEMA 4 (Totally enclosed) 10 Enclosure Color: GRY for Gray, BLU for Royal Blue, RED for Red (Other colors are available) Example: HTT with 75 kVA Rating, Zero Degrees Phase Shift, 480 V Primary, 208/120 V Secondary, 130 C Temperature Rise, 60 Hz Frequency, 2 Electrostatic Shields, in Gray NEMA 3R Enclosure Model Number: HTT-75-0-480-208-130-60-2S-N3R-GRY Additional Options: The additional options available for the product are listed below. Additional options are not abbreviated in the part number of the product and should be listed separately at the time of order. Please note that some of these options may not be available depending on product specification. For complete details please refer to the related page in the "options" section of the catalogue. Lug Kit Digital Voltmeter Thermal Switches Ceiling Mount Ground Bar Ultra Quiet Over-Current Alarm Over-Temperature Alarm WWW. SynergyEnergyInc . COM 1-866
part of Synergy Energy Inc.'s designs. Synergy Energy Inc. is an Energy Star partner and capable of manufacturing transformers up to 5000 kVA and 25 kV in two New Jersey (USA) and Ontario (Canada) plants. The products offered by Synergy Energy Inc. are UL, INTERTEK and CE approved.
This User Manual is a guide for use during the installation, normal operation and maintenance of a Synergy System or Synergy UV Water Purification System. 'Synergy' is used in this manual to refer to either the Synergy or the Synergy UV System unless otherwise noted. It is highly recommended to completely read this manual and to
three new synergy measures: the expected total cost synergy, the relative risk reduction synergy, and the absolute risk reduction synergy for the assessment of the potential strategic advantages. We illustrate the analytical framework with two sets of numerical examples
synergy and evolution. Our synergy and evolution elevators combine state-of-the-art technology with flexible design. Immerse yourself in the design world of these two elevator families and choose the design that suits your taste and requirements. 4 synergy and evolution. With its compact dimensions, the synergy series is perfect for
Synergy.doc - 2 - 1. Introduction Your Synergy V Universal / DVR remote control is simple to program, easy to use, and can operate up to five (5) electronic devices, which include: CABLE Cable set-top terminals TV Televisions VCR VCR DVD DVD AUDIO Audio receivers, amplifiers, CD players Before you can use your remote control, it must be programmed (set-up) to operate the above devices.
The Synergy Shape Back is a unique seatback cushion that is available in standard, tall, and low versions and is fully adjustable for user comfort and positioning needs. Figures 1 and 2 provide information on the Synergy Shape Back components and cushions. Use this diagram to familiarize yourself with the function and location of
HPE Synergy has several significant management enhancements compared to HPE BladeSystem. c-Class infrastructure. HPE Synergy Composer provides automated discovery of physical resources. All HPE Synergy Frames linked in a domain are automatically identified, assigned resources by HPE Composer, and then placed into a monitored state.
SofLens 66 Toric (Bausch & Lomb) 119 120 Soft 72 (Menicon) 121 122 Soft 72 Toric (Menicon) 123 124 Synergy Custom Delta 55% (Gelflex) 125 126 Synergy Custom Gamma 49% (Gelflex) 127 128 Synergy Definitive Hydrogel (Gelflex) 129 130 Synergy Delta (Gelflex) 131 132
June 1982 concerning certain products used in animal nutrition(6), should be included as a category of feed additives and therefore transferred from the scope of that Directive to this Regulation. (13) Implementing rules concerning applications for authorisation of feed additives should take into account different documentation requirements for food-producing and other animals. (14) In order .
