LOREX EASY CONNECT INTERNET REMOTE MONITORING - Home Controls

14d ago
5 Views
0 Downloads
1.24 MB
7 Pages
Last View : 5d ago
Last Download : n/a
Upload by : Tripp Mcmullen
Transcription

LOREX EASY CONNECT INTERNET REMOTE MONITORING LOREX EDGE LH310 SERIES INSTALLATION GUIDE English Version 1.0 www.lorexcctv.com Copyright 2010 Lorex Technology Inc.

WHAT IS YOICS EASY CONNECT? Yoics is an online service that allows you to connect and manage your Lorex devices online without router configuration. Register with Yoics to remotely view your cameras on your DVR anywhere in the world. Before You Get Started While Yoics is the most advanced networking solution available in the market, it may not address all circumstances. Lorex is providing the Yoics service free of charge to the customer to ease the network configuration process. Yoics is designed for Instant Remote Viewing. Yoics times out after 15-30 minutes to conserve your bandwidth. Intended Use Yoics Easy Connect is designed for homes and small businesses that do not have a corporate network infrastructure. If for any reason the Yoics Easy Connect solution is not compatible with your environment, please refer to the instruction manual for internet remote viewing using the remote viewing software. Software Compatibility System Requirements: Microsoft Windows XP, Vista, Windows 7 operating systems Internet Explorer 6 or later only NOTE: Firefox, Safari and browsers other than Internet Explorer are not supported. 1

Enabling Easy Connect ENABLING EASY CONNECT Enabling Easy Connect is a two part process. First, you must upgrade your system to the latest firmware. Then, you must create a Yoics account. Upgrading The Firmware Prep the USB Flash Drive NOTE: You must format the USB flash drive using the DVR. Formatting your USB flash drive deletes all content stored on your drive. To format the USB flash drive: 1. Insert a USB flash drive into the DVR while the DVR is on. 2. Click the Menu button. The Main Menu window opens. Click Format Device to begin formatting the USB flash drive. Backup button 3. Click the Backup button. The Backup window opens. 4. Click Format Device and then click Yes to begin formatting the USB flash drive. Click Yes to format the USB flash drive. Figure 2: Format prompt screen. Indicates DVR is formatting USB flash drive. 5. Remove the USB flash drive from the DVR when formatting is complete. 2

Enabling Easy Connect Download the firmware from the Lorex website 1. Go to www.lorexcctv.com and search for LH3xx (where xx is your model # ie. LH314). Download the latest firmware relevant to your model number. NOTE: 4-channel firmware is different from the 8 & 16-channel firmware. 2. Extract the firmware to the USB flash drive. Do not extract the firmware into the Pictures or Movies folder. NOTE: Firmware ends in a .rom extension 8 & 16 Channel firmware version name: 1.30.03 18712 or later Upgrade the DVR firmware 1. 2. 3. 4. 5. Power down the DVR by unplugging the power cord from the DVR. Insert the USB flash drive into the DVR. Turn on the DVR by plugging the power cord into the DVR. Wait for the DVR to detect the USB flash drive. The firmware upgrade automatically begins. Click Yes to begin the firmware upgrade. Wait for the firmware upgrade to finish. Click Yes to begin firmware upgrade. Firmware upgrade progress. Figure 3: Firmware upgrade window. 6. Power down the DVR by unplugging the power cord from the DVR and remove the USB flash drive. 7. Turn on the DVR by plugging the power cord into the DVR. Enabling Easy Connect on your DVR Once your unit is upgraded with the latest firmware, check if Easy Connect is enabled. To check if Easy Connect is enabled: 1. Click Menu. LAN icon Figure 4: Opening the LAN settings. 2. Click the LAN icon on the bottom right hand corner of the main menu (Figure 4). 3

Enabling Easy Connect 3. Click Easy Connect in the LAN menu. The Easy Connect window opens (Figure 5). A blue "O" indicates Yoics is enabled. A red "X" indicates Yoics is disabled. Only click to restart Yoics service in case of a connection problem with Yoics. Allow 10 minutes for the changes to take effect. Figure 5: Easy Connect menu. 4. Under Yoics Enable, a blue "O" indicates Yoics is enabled. Use the mouse scroll wheel to turn Yoics on or off. NOTE: Click on Restart Yoics only if you have a connection problem with Yoics. Changes take effect in 10 minutes. After 10 minutes, re-login to your Yoics account. Registering for an Easy Connect account After you upgrade your DVR with the Yoics Easy Connect firmware, you must create a Yoics account and register your device with Yoics. To register your DVR with Yoics: 1. Go to http://lorex.yoics.com and register for an account. NOTE: There is no "www" in front of the address. You must connect your DVR to a router connected to the internet before registering a Yoics account. This ensures that upon account activation, Yoics will automatically detect your DVR. Click Register after you complete the form. Figure 6: Yoics registration screen. 4

Enabling Easy Connect 2. After you log into Yoics, a message box indicates that a device has been detected by Yoics. Click Complete Registration to continue. A "Register New Devices" window opens. NOTE: If you do not see this pop-up window, double check that Easy Connect is enabled on your DVR. NOTE: The DVR must be connected directly to a router through a hardwire connection. Figure 7: Yoics device detection pop-up. 3. Under Yoics Device Name, enter in the desired name for your DVR. In this example, we named the system name to "DVR". Click Register Now to continue. Enter desired name of your DVR here. Figure 8: Register New Devices window. Your device appears on the left side bar under "My Stuff". NOTE: You do not have to click the Upgrade Now button. This service is provided free of charge. 5

Enabling Easy Connect Connecting to your DVR using Easy Connect Once you have logged into your Yoics account, you may connect to your DVR at any time. To begin live viewing of your DVR: 1. Log in to your Yoics account using Internet Explorer. 2. Click the name of your system on the left side bar under "My Stuff" to connect to your DVR (Figure 8). 3. An ActiveX toolbar opens in the browser. Click the ActiveX tool bar and click Install ActiveX Control to continue. Click Install ActiveX Control. NOTE: Your browser settings may prevent you from installing ActiveX. Adjust your browser settings to allow for ActiveX installation. Figure 9: ActiveX installation window. 4. Enter your DVR user name and password and click LOGIN. A second ActiveX installation pop-up window opens. Click Install to continue and connect to your DVR. Click Install to install ActiveX. Figure 10: ActiveX initialization screen. Install ActiveX to connect to your DVR remotely. NOTE: The connection times out after 15 minutes to conserve your bandwidth. Simply re-login to your account to begin remote viewing. 6

Download the firmware from the Lorex website. Go to www.lorexcctv.com and search for LH3xx (where xx is your model # ie. LH314). Download the latest firmware relevant to your model number. NOTE: 4-channel firmware is different from the 8 & 16-channel firmware. Extract the firmware to the USB flash drive.

Related Documents:

STEP 3: Connecting with Lorex Cirrus Connect to your system using the free Lorex Cirrus app for smartphones and tablets (iOS and Android). To Connect with Lorex Cirrus 1. Download and install the free Lorex Cirrus app from the App Store or Google Play Store (Or scan QR code on the front page). 2. Tap the Lorex Cirrus icon to launch the app. 3.

Lorex Backup - Used to connect to the System, and retrieve data backup to the local PC. 3. Lorex Player 5.0 - Used to playback data retrieved using the Lorex Backup. 4. Remote Setup - Configuration and setup for remote access. 5. IRS Setup - Used to configure the DDNS Settings (mus t be setup prior to using the H.264 Viewer). 6.

2. Pair the Lorex Home Center to the Lorex Home app for remote access and viewing. Notes: Use the device password when asked (Step 3 in "Connect the Lorex Home Center"). This does not apply if you are using the offline connection method. Cameras Add a Wi-Fi indoor or outdoor camera or a floodlight camera.

LOREX N862 Series Remote Access User Guide November 12, 2021November 16, 2021 . Make sure you have a router and high-speed Internet access (not included). Connect your recorder to your router using an Ethernet cable (see the Quick Setup Guide [Guide 1/2] for . Up to 3 devices may connect to the system at the same time. Contents [ hide 1 .

All other system features can be used without an Internet connection. 6 Setup step 3 — Connect mouse Connect the included USB mouse to the USB port on the recorder. . Prerequisite: Connect to your recorder using the Lorex Home app, see 'Remote viewing' pg.23. 1. Launch the Lorex Home app and tap your NVR to view connected channels.

May 5 2011 - R11 Necesita Ayuda COMUNÍQUESE PRIMERO CON NOSOTROS Vous Avez Besoin D'aide? CONTACTEZ-NOUS D'ABORD 3 façons faciles de nous contacter: L'Amérique du Nord: Service à la clientèle: 1-888-425-6739 (1-888-42-LOREX) Support technique: 1-877-755-6739 (1-877-75-LOREX) Mexico: 1-800-514-6739 International: 800-425-6739- (Exemple: À partir du Royaume-Uni, composez 00 au lieu .

Easy Connect Lorex Auto Port Forward Wizard Supported Operating Systems Windows XP, Vista, 7 Mac OSX Snow Leopard 10.6 Browsers Internet Explorer & Safari 5.0 Email notification Text with snapshot Instant Smart Phone Compatibility† Instant Smart Phone Compatibility on iPhone , BlackBerry (supported model numbers: 9700,

luxury week long cruise in the Pacific Ocean. You encountered a bad storm and the clipper ship limped to shore and partially sank. Only the top is still visible off the north tip of the island. You are all now stranded on an uninhabited island in the middle of the Pacific Ocean. The storm basically ruined most things on board, leaving very few useful items. Your task is choose the 12 most .