Basic Manual - Home Onkyo USA

SN29402177B TX-RZ810 BAS En 1702xx.book Before start1 ページ２０１７年２月９日 Hookup木曜日午後３時３３分 Setup Playback Part NamesBasic ManualHookupStep1: Choose your Speaker Layout .3Step2: Connect the Speakers .9Step3: Connect the TV .11Step4: Connect the AV Components .13Step5: Multi-zone Connection .16Step6: Connect Other Cables .19SetupStep7: Power On & Initial Setup .20HDMI Setup .21PlaybackBasic Playback .22Network Functions .23Others .25Part NamesFront Panel .27Display .28Rear Panel .29Remote Controller .30AV RECEIVERTX-RZ810This manual includes information needed when starting up and alsoinstructions for frequently used operations. The "Advanced Manual" isavailable on the internet with details about the playback features/listening modes/settings details, specifications, and troubleshooting.The Advanced Manual is created in a format that makes it easy to readon a PC or /en.htmlAdvanced Manual found here

SN29402177B TX-RZ810 BAS En 1702xx.book Before start2 ページ２０１７年２月９日 Hookup木曜日午後３時３３分 Setup Playback Part NamesWhat's in the box1. Main unit 2. Remote controller (RC-911R) 1, Batteries (AAA/R03) 23. Indoor FM antenna 1 4. AM loop antenna 1 5. Speaker setup microphone 16. Power cord 1Main features1252364This unit is connected between your TV and your AV components. To play, select the source with the inputselector. You can connect 7.1ch of speakers to this unit, with 7ch at 200 W (6 ohms, 1 kHz, 0.9%THD) (NorthAmerican models) / 180 W (6 ohms, 1 kHz, 1%THD) (European, Australian and Asian models) per channel pluspre out jack for powered subwoofer. Conforms to the THX Select2 Plus specification: THX is a series of specifications for the accurate reproduction of moviespropounded by the film director George Lucas. This unit is equipped with a variety of THX technology to faithfully reproduceaccording to the sound design envisaged by the movie producer, including surround modes that take account of factorssuch as the size and number of speakers, and the differences in environments between home theaters and movie theaters. Supports playback in Dolby Atmos format which provides 360e sound placement The HDMI jack supports 4K video input and output. Jacks IN1 to 3 and OUT MAIN/SUB support HDCP2.2 HDMI CEC functionality: Control features such as linking input switching with the input selector and playersconforming to the CEC standard, switching audio output and volume using the remote controller of a CECcompliant TV, and automatically switching this unit to standby when the TV is turned off HDMI Standby Through: Video and audio signals from AV components can be transmitted to the TV even if this unit is in standby ARC: Connection with an ARC-compatible TV is complete with one HDMI cable Easy Initial Setup using onscreen guidance and On-Screen Display (OSD) showing operations on the TV Internet radio and AirPlay via wired LAN or Wi-Fi (wireless LAN) and network features such as Music Server that enablesPC music file playback, USB playback, plus other playback features such as AM/FM radio and BLUETOOTH play Playback formats supported by Music Server and USB include WAV, FLAC and DSD high-res source Multi-zone Connection which allows you to play in the main room and listen in a separate room (ZONE 2/ZONE 3) Equipped with RS232 port, IR IN jack, and 12V TRIGGER OUT jack We plan to provide support for the DTS:X audio format through a firmware update for this unit. Refer to ourwebsite for more information.CAUTION: Connect speakers with 6 Ω to 16 Ω impedance. (North American models: It is possible to usespeakers with 4 Ω to 16 Ω impedance by selecting the appropriate setting for them.) When connectingspeakers to both ZONE 2A and ZONE 2B (North American models) (ÄP18), both sets of speakers connected inZONE 2 should have 8 Ω to 16 Ω impedance. The power cord must be connected only after all other cableconnections are completed.0 We will not accept responsibility for damage arising from the connection of equipment manufactured byother companies.

SN29402177B TX-RZ810 BAS En 1702xx.book Before start3 ページ２０１７年２月９日 Hookup木曜日午後３時３３分 Setup Playback Part NamesStep1: Choose your Speaker LayoutFor 5.1-Channel SystemThis is a 5.1-channel system that is the basic surroundsystem. Front speakers output front stereo sound and acenter speaker outputs center sound such as dialogs andvocals. Surround speakers create back sound field.Powered subwoofer reproduces bass sounds and createsrich sound field. The front speakers should be positionedat ear height, while the surround speakers should bepositioned just above ear height. Center speaker shouldbe set up facing the listening position. Place the poweredsubwoofer towards the front. Placing it between the centerspeaker and a front speaker gives you a natural soundeven when playing music.0 The front speakers, center speaker, and surroundspeakers are counted as 5 channels, and the poweredsubwoofer is counted as 0.1 of a channel, giving us thename 5.1ch system.＊1＊2＊ 1: 22e to 30e, ＊ 2: 120e 1 2 Front Speakers3 Center Speaker4 5 Surround Speakers6 Powered SubwooferGo To "Hookup" (ÄP9)3

SN29402177B TX-RZ810 BAS En 1702xx.book Before start4 ページ２０１７年２月９日 Hookup木曜日午後３時３３分 Setup Playback Part NamesFor 7.1-Channel System (withSurround Back Speakers)This is a system with surround back speakers added tothe basic 5.1-channel system. The connection of surroundback speakers improves the sense of envelopment andconnectivity of sound created by the back sound field andprovides a more real sound field. You can select the DolbyAtmos listening mode, which realizes the most up-to-date3D surround sound, when the input format is DolbyAtmos. With formats other than Dolby Atmos, you can stillcreate a sound field by outputting sound from thesurround back speakers when you select the DolbySurround listening mode. The optimal positioning is forsurround back speakers to be at ear height. Place thesurround speakers in a more slightly forward position thanyou would in a 5.1-channel system.0 If you are including surround back speakers in thesetup, surround speakers are required.＊1＊2＊31 6 (ÄP3)7 8 Surround Back Speakers＊ 1: 22e to 30e, ＊ 2: 90e to 110e, ＊ 3: 135e to 150e 4Go To "Hookup" (ÄP9)

SN29402177B TX-RZ810 BAS En 1702xx.book Before start5 ページ２０１７年２月９日 Hookup木曜日午後３時３３分 Setup Playback Part NamesFor 7.1-Channel System(with Height Speakers-A)Front High or Rear High speakersThis is a basic 5.1-channel system with the addition ofheight speakers, either as front high speakers or rear highspeakers. Select which speakers to setup according tothe environment of the room. You can select the DolbyAtmos listening mode (5.1.2 channel playback), whichrealizes the most up-to-date 3D surround sound includingoverhead sounds, when the input format is Dolby Atmos.With formats other than Dolby Atmos, you can still createa sound field by outputting sound from the heightspeakers when you select the Dolby Surround listeningmode. Front high speakers or rear high speakers shouldbe situated at least 0.9 m higher than the front speakers.Front high speakers should be situated directly above thefront speakers and the distance between the rear highspeakers should match the distance between the frontspeakers. Both should be set up facing the listeningposition.3 (0.9 m)or more＊1＊21 6 (ÄP3)9 : Height SpeakersChoose one of the following: Front High Speakers Rear High Speakers＊ 1: 22e to 30e, ＊ 2: 120e Go To "Hookup" (ÄP9)5

SN29402177B TX-RZ810 BAS En 1702xx.book Before start6 ページ２０１７年２月９日 Hookup木曜日午後３時３３分 Setup Playback Part NamesFor 7.1-Channel System(with Height Speakers-B)Ceiling speakersThis is a basic 5.1-channel system using ceiling speakers,for example, with the addition of height speakers, eitheras top front speakers, top middle speakers, or top rearspeakers. Select which speakers to setup according tothe environment of the room. You can select the DolbyAtmos listening mode (5.1.2 channel playback), whichrealizes the most up-to-date 3D surround sound includingoverhead sounds, when the input format is Dolby Atmos.With formats other than Dolby Atmos, you can still createa sound field by outputting sound from the heightspeakers when you select the Dolby Surround listeningmode. Fit top front speakers on the ceiling forward of theseating position, top middle speakers on the ceilingdirectly above the seating position, and top rear speakerson the ceiling behind the seating position. The distancebetween each pair should match the distance betweenthe two front speakers.0 Dolby Laboratories recommends placing this type ofheight speakers to obtain the best Dolby Atmos effect.＊3＊21 6 (ÄP3)＊19 : Height SpeakersChoose one of the following:6＊ 1: 30e to 55e, ＊ 2: 65e to 100e, ＊ 3: 125e to 150e Top Front Speakers Top Middle Speakers Top Rear SpeakersGo To "Hookup" (ÄP9)

SN29402177B TX-RZ810 BAS En 1702xx.book Before start7 ページ２０１７年２月９日 Hookup木曜日午後３時３３分 Setup Playback Part NamesFor 7.1-Channel System(with Height Speakers-C)Dolby enabled speakersThis is a basic 5.1-channel system that using Dolbyenabled speakers, with the addition of height speakers,either as Dolby enabled speakers (front) or Dolby enabledspeakers (surround) or Dolby enabled speakers (surroundback). Select which speakers to setup according to theenvironment of the room. Dolby enabled speakers arespecial speakers designed to face the ceiling so thatsound is heard after bouncing off the ceiling so that soundappears to be coming from overhead. You can select theDolby Atmos listening mode (5.1.2 channel playback),which realizes the most up-to-date 3D surround soundincluding overhead sounds, when the input format isDolby Atmos. With formats other than Dolby Atmos, youcan still create a sound field by outputting sound from theheight speakers when you select the Dolby Surroundlistening mode. Place them either above the frontspeakers or above the surround speakers or above thesurround back speakers.＊11 6 (ÄP3)＊3＊29 : Height SpeakersChoose one of the following: Dolby Enabled Speakers (Front) Dolby Enabled Speakers (Surround) Dolby Enabled Speakers (Surround Back)＊ 1: 22e to 30e, ＊ 2: 90e to 120e, ＊ 3: 135e to 150e Go To "Hookup" (ÄP9)7

SN29402177B TX-RZ810 BAS En 1702xx.book Before start8 ページ２０１７年２月９日 Hookup木曜日午後３時３３分 Setup Playback Part NamesFor Bi-Amping theSpeakersIt is possible to connect front speakers supporting BiAmping to improve quality of the bass and treble. Themaximum number of channels available with thisconnection is 5.1 because Bi-Amping speakers requireone amplifier for the tweeter jacks and one amplifier forthe woofer jacks. The effects and placements forspeakers are the same as the 5.1-channel plan thatdoesn't use Bi-Amping speakers.0 You cannot output to ZONE 2 SPEAKER (ÄP18) if thespeakers have been connected for Bi-Amping.＊1＊2＊ 1: 22e to 30e, ＊ 2: 120e8 1 2 Front Speakers (Bi-Amping)3 Center Speaker4 5 Surround Speakers6 Powered SubwooferGo To "Hookup" (ÄP10)