VOL. 49, #18May 4, 2018ContentsAmerican National StandardsCall for Comment on Standards Proposals .Call for Members (ANS Consensus Bodies) .Final Actions .Project Initiation Notification System (PINS) .ANS Maintained Under Continuous Maintenance .ANSI-Accredited Standards Developers Contact Information .21518192223International StandardsISO and IEC Draft Standards .ISO and IEC Newly Published Standards.2528Registration of Organization Names in the U.S. .Proposed Foreign Government Regulations .Information Concerning .313132American National StandardsCall for comment on proposals listedThis section solicits public comments on proposed draft newAmerican National Standards, including the national adoption ofISO and IEC standards as American National Standards, and onproposals to revise, reaffirm or withdraw approval of existingAmerican National Standards. A draft standard is listed in thissection under the ANSI-accredited standards developer (ASD)that sponsors it and from whom a copy may be obtained.Comments in connection with a draft American NationalStandard must be submitted in writing to the ASD no later thanthe last day of the comment period specified herein. Suchcomments shall be specific to the section(s) of the standardunder review and include sufficient detail so as to enable thereader to understand the commenter's position, concerns andsuggested alternative language, if appropriate. Please note thatthe ANSI Executive Standards Council (ExSC) has determinedthat an ASD has the right to require that interested parties submitpublic review comments electronically, in accordance with thedeveloper’s procedures.Ordering Instructions for "Call-for-Comment" Listings1. Order from the organization indicated for the specificproposal.2. Use the full identification in your order, including theBSR prefix; for example, Electric Fuses BSR/SAE J554.3. Include remittance with all orders.4. BSR proposals will not be available after the deadline ofcall for comment.Comments should be addressed to the organization indicated,with a copy to the Board of Standards Review, AmericanNational Standards Institute, 25 West 43rd Street, New York,NY 10036. Fax: 212-840-2298; e-mail: email@example.com* Standard for consumer products 2018 by American National Standards Institute, Inc.ANSI members may reproduce for internal distribution. Journals may excerpt items in their fieldsISSN 0038-9633
Standards Action - May 4, 2018 - Page 2 of 66 pagesComment Deadline: June 3, 2018NSF (NSF International)RevisionEOS/ESD (ESD Association, Inc.)BSR/NSF 2-201x (i28r1), Food Equipment (revision of ANSI/NSF 2-2016)RevisionEquipment covered by this Standard includes, but is not limited to, bakery,cafeteria, kitchen, and pantry units and other food handling and processingequipment such as tables and components, counters, hoods, shelves, andsinks.BSR/ESD S541-201x, ESD Association Standard for the Protection ofElectrostatic Discharge Susceptible Items Packaging Materials (revision ofANSI/ESD S541-2003 (R2008))This document applies to packaging used to store, transport, and protectESDS electronic items during all phases of production and distribution. Thisdocument does not address protection from EMI/RFI/EMP or protection ofvolatile materials.Click here to view these changes in fullSend comments (with copy to firstname.lastname@example.org) to: email@example.comEOS/ESD (ESD Association, Inc.)RevisionBSR/ESDA/JEDEC JS-002-201x, ESDA/JEDEC Joint Standard forElectrostatic Discharge Sensitivity Testing Charged Device Model (CDM)Device Level (revision of ANSI/ESDA/JEDEC JS-002-2015)This document establishes the procedure for testing, evaluating, andclassifying devices and microcircuits according to their susceptibility(sensitivity) to damage or degradation by exposure to a defined field-inducedcharged device model (CDM) electrostatic discharge (ESD). All packagedsemiconductor devices, thin film circuits, surface acoustic wave (SAW)devices, opto-electronic devices, hybrid integrated circuits (HICs), and multichip modules (MCMs) containing any of these devices are to be evaluatedaccording to this standard. To perform the tests, the devices must beassembled into a package similar to that expected in the final application.This CDM document does not apply to socketed discharge model testers.This test method combines the main features of JEDEC JESD22-C101 andANSI/ESD S5.3.1. New verification procedures and test condition definitionshave been introduced to facilitate this combination.Click here to view these changes in fullSend comments (with copy to firstname.lastname@example.org) to: email@example.comClick here to view these changes in fullSend comments (with copy to firstname.lastname@example.org) to: email@example.comRESNET (Residential Energy Services Network, Inc.)AddendaBSR/RESNET/ICC 301-201x Addendum F-201x, Normative Appendix A(addenda to ANSI/RESNET/ICC 301-2014)Revise Standard ANSI/RESNET/ICC 301-2014 to add Normative AppendixA that provides inspection procedures and grading criteria for insulationinstalled in residential buildings.Click here to view these changes in fullSend comments (with copy to firstname.lastname@example.org) to: Comments are submittedvia RESNET's online comment form. See the links from webpage: ds/TCIA (ASC A300) (Tree Care Industry Association)RevisionBSR A300 Part 2-201x, Tree, Shrub, and Other Woody Plant Management Standard Practices (Soil Management a. Assessment, b. Modification, c.Fertilization, and d. Drainage) (revision of ANSI A300 Part 2-2011)A300 (Part 2) Soil Management standards are performance standards formanagement of soil including soil assessment, modification, fertilization, anddrainage for trees, shrubs, and other woody plants. It is a guide in thedrafting of work project specifications for consumers as well as federal, state,municipal, and private authorities including property owners, propertymanagers, and utilities.Click here to view these changes in fullIES (Illuminating Engineering Society)RevisionSend comments (with copy to email@example.com) to: Submit comments online ES RP-1-2013 Addendum 2-201x, Office Lighting (revision ofANSI/IES RP-1-2013)Create an addendum to revise Section 184.108.40.206, Compact Fluorescent Lamps,to balance the level of detail in relation to Section 220.127.116.11, Light EmittingDiodes; consider CRI revisions, OLEDs, and color tuning.Click here to view these changes in fullSend comments (with copy to firstname.lastname@example.org) to: email@example.comUL (Underwriters Laboratories, Inc.)RevisionBSR/UL 923-201x, Standard for Safety for Microwave Cooking Appliances(revision of ANSI/UL 923-2017)This proposal for UL 923 covers: (1) Safety of smart-enabled microwavecooking appliances.Click here to view these changes in fullNECA (National Electrical Contractors Association)New StandardBSR/NECA 121-201X, Standard for Installing Nonmetallic-Sheathed Cable(Type NM-B) and Underground Feeder and Branch-Circuit Cable (Type UF)(new standard)This standard describes installation procedures for nonmetallic-sheathedcable (Type NM) and underground feeder and branch-circuit cable (TypeUF).Click here to view these changes in fullSend comments (with copy to firstname.lastname@example.org) to: email@example.comSend comments (with copy to firstname.lastname@example.org) to: Amy Walker, (847) 664-2023, Amy.K.Walker@ul.comUL (Underwriters Laboratories, Inc.)RevisionBSR/UL 985-201x, Standard for Safety for Household Fire Warning SystemUnits (revision of ANSI/UL 985-2017)(1) Alarm verification labeling; (2) Revision to Charging Current test.Click here to view these changes in fullSend comments (with copy to email@example.com) to: Griff Edwards, 919 549-0956, firstname.lastname@example.org
Standards Action - May 4, 2018 - Page 3 of 66 pagesUL (Underwriters Laboratories, Inc.)AGA (ASC B109) (American Gas Association)RevisionNew StandardBSR/UL 1283-201x, Standard for Safety for Electromagnetic InterferenceFilters (revision of ANSI/UL 1283-2017)BSR B109.2-201x, Diaphragm-Type Gas Displacement Meters (500 CubicFeet per Hour Capacity and Over) (new standard)(1) Additional requirements for overload testing when integral overtemperature protection are provided.This publication represents a basic standard for safe operation andsubstantial and durable construction for diaphragm-type gas displacementmeters having a gas-flow rating of 500 cubic feet per hour (14.2m3/h) andover at 0.5-inch water column (125 Pa) differential pressure at standardconditions. The standard is designed to ensure efficient performance andsubstantial construction of equipment.Click here to view these changes in fullSend comments (with copy to email@example.com) to: Megan Van Heirseele,(847) 664-2881, Megan.M.VanHeirseele@ul.comSingle copy price: FreeUL (Underwriters Laboratories, Inc.)RevisionObtain an electronic copy from: jmeyers@aga,orgOrder from: Jeffrey Meyers, (202) 824-7333, firstname.lastname@example.orgSend comments (with copy to email@example.com) to: SameBSR/UL 1998-201x, Standard for Safety for Software in ProgrammableComponents (revision of ANSI/UL 1998-2013)These requirements apply to non-networked embedded microprocessorsoftware whose failure is capable of resulting in a risk of fire, electric shock,or injury to persons. This is a reference standard in which the requirementsare to be applied when specifically referenced by other standards or productsafety requirements. These requirements address the risks unique toproduct hardware controlled by software in programmable components.ANS (American Nuclear Society)ReaffirmationBSR/ANS 15.8-1995 (R201x), Quality Assurance Program Requirements forResearch Reactors (reaffirmation of ANSI/ANS 15.8-1995 (R2013))Click here to view these changes in fullThe standard provides criteria for quality assurance in the design,construction, operation, and decommissioning of research reactors.Send comments (with copy to firstname.lastname@example.org) to: Megan Monsen, (847) 664-1292, email@example.comSingle copy price: 70.00Obtain an electronic copy from: firstname.lastname@example.orgOrder from: email@example.comUL (Underwriters Laboratories, Inc.)Send comments (with copy to firstname.lastname@example.org) to: email@example.comRevisionBSR/UL 2459-201x, Standard for Safety for Insulated Multi-Pole SplicingWire Connectors (revision of ANSI/UL 2459-2014)(1) Minimum Spacings Table 4; (2) Intermateability of connectors; (3) Use ofmulti-pole splicing wire connectors as disconnects in LED applications.Click here to view these changes in fullSend comments (with copy to firstname.lastname@example.org) to: Mitchell Gold, (847) 664-2850, Mitchell.Gold@ul.comComment Deadline: June 18, 2018ASA (ASC S12) (Acoustical Society of America)ReaffirmationBSR ASA S12.9-2013/Part 1 (R201x), Quantities and Procedures forDescription and Measurement of Environmental Sound - Part 1: BasicQuantities and Definitions (reaffirmation of ANSI ASA S12.9-2013/Part 1)Provides basic quantities for description of sound in communityenvironments and general procedures for measurement of these quantities.Based on these quantities and procedures, compliance limits of sound maybe specified by cognizant authorities and conformance with the limitscontrolled for purposes of environmental assessment, regulation, and landuse planning.Single copy price: 95.00Obtain an electronic copy from: email@example.comAGA (ASC B109) (American Gas Association)Order from: Neil Stremmel, (631) 390-0215, firstname.lastname@example.orgNew StandardSend comments (with copy to email@example.com) to: SameBSR B109.1-201x, Diaphragm-Type Gas Displacement Meters (Under 500Cubic Feet per Hour Capacity) (new standard)This publication represents a basic standard for safe operation andsubstantial and durable construction for diaphragm-type gas displacementmeters having a gas-flow rating of under 500 cubic feet per hour (14.2m3/h)at 0.5-inch water column (125 Pa) differential pressure at standardconditions. The standard is designed to ensure efficient performance andsubstantial construction of equipment.Single copy price: FreeObtain an electronic copy from: firstname.lastname@example.orgOrder from: Jeffrey Meyers, (202) 824-7333, email@example.comSend comments (with copy to firstname.lastname@example.org) to: SameASA (ASC S12) (Acoustical Society of America)ReaffirmationBSR ASA S12.9-2013/Part 3 (R201x), Quantities and Procedures forDescription and Measurement of Environmental Sound - Part 3: Short-TermMeasurements with an Observer Present (reaffirmation of ANSI ASA S12.9-2013/Part 3)Third in a series of parts concerning description and measurement ofoutdoor environmental sound. Describes recommended procedures formeasurement of short-term, time-average environmental sound outdoors atone or more locations in a community for environmental assessment orplanning for compatible land uses and for other purposes such asdemonstrating compliance with a regulation.Single copy price: 115.00Obtain an electronic copy from: email@example.comOrder from: Neil Stremmel, (631) 390-0215, firstname.lastname@example.orgSend comments (with copy to email@example.com) to: Same
Standards Action - May 4, 2018 - Page 4 of 66 pagesASHRAE (American Society of Heating, Refrigeratingand Air-Conditioning Engineers, Inc.)ASSE (ASC A10) (American Society of Safety Engineers)RevisionBSR ASSE A10.7-201X, Safety Requirements for Transportation, Storage,Handling and Use of Commercial Explosives and Blasting Agents (revisionof ANSI ASSE A10.7-2011)BSR/ASHRAE Standard 25-201x, Methods of Testing Forced CirculationFree-Delivery Unit Coolers for Refrigeration (revision of ANSI/ASHRAEStandard 25-2001 (R2016))This standard establishes uniform methods of testing for obtainingperformance data and lists, defines the terms used in testing, specifies datato be recorded and formulas to be used in calculations, and sets limits andtolerances in testing.RevisionProvides the construction industry with reasonable minimumrecommendations for establishing and maintaining a level of health andsafety with regard to the transportation, storage, handling, and use ofcommercial explosives and blasting agents.Single copy price: 80.00Single copy price: 35.00Obtain an electronic copy from: LBauerschmidt@asse.orgObtain an electronic copy from: y/public-review-draftsOrder from: ASSESend comments (with copy to firstname.lastname@example.org) to: LBauerschmidt@asse.orgSend comments (with copy to email@example.com) to: gy/public-review-draftsASSE (Safety) (American Society of Safety Engineers)ASHRAE (American Society of Heating, Refrigeratingand Air-Conditioning Engineers, Inc.)RevisionBSR/ASHRAE/IES Standard 90.2-201x, Energy-Efficient Design of Low-RiseResidential Buildings (revision of ANSI/ASHRAE/IES Standard 90.2-2007)This proposed revision of ASHRAE Standard 90.2 presents a completelynew approach to delivered residential building energy performance than the2007 edition of the Standard. This version of Standard 90.2 incorporatesnumerous revisions from the first Public Review Draft. It is these revisionsthat are the subject of this review. The SSPC worked with commentors onover 160 comment submissions to clarify and strengthen this new Standard.Single copy price: 35.00ReaffirmationBSR/AIHA Z9.6-2008 (R201x), Exhaust Systems for Grinding, Polishing andBuffing (reaffirmation of ANSI/AIHA Z9.6-2008)The requirements and emission and exposure control principles described inthis standard represent the minimum criteria intended to protect the health ofpersonnel engaged in and working in the vicinity of grinding, polishing, andbuffing operations and to control contaminants generated by thoseoperations.Single copy price: 77.00Obtain an electronic copy from: OMunteanu@ASSE.orgOrder from: Ovidiu Munteanu, (847) 232-2012, OMunteanu@ASSE.orgSend comments (with copy to firstname.lastname@example.org) to: SameObtain an electronic copy from: email@example.comOrder from: firstname.lastname@example.orgSend comments (with copy to email@example.com) to: Online Comment Databaseat gy/public-reviewdraftsASSE (Safety) (American Society of Safety Engineers)ASME (American Society of Mechanical Engineers)This Standard establishes minimum requirements for the commissioning,design, specification, construction, and installation of fixed industrial localexhaust ventilation (LEV) systems used for the reduction and prevention ofemployee exposure to harmful airborne substances in the industrialenvironment. It also establishes fundamental requirements for themanagement, operation, maintenance, and testing of LEV systems to assuresatisfactory performance over the life of the system, as well as the basicrequirements for replacing air exhausted from the space.RevisionBSR/ASME B31.8S-201x, Managing System Integrity of Gas Pipelines(revision of ANSI/ASME B31.8-2016)This Code applies to onshore pipeline systems constructed with ferrousmaterials and that transport gas. The principles and processes embodied inintegrity management are applicable to all pipeline systems. This Code isspecifically designed to provide the operator with the information necessaryto develop and implement an effective integrity management programutilizing proven industry practices and processes. The processes andapproaches described within this Code are applicable to the entire pipeline.Single copy price: FreeRevisionBSR/ASSE Z9.2-201X, Fundamentals Governing the Design and Operationof Local Exhaust Ventilation Systems (revision and redesignation ofANSI/AIHA Z9.2-2001 (R2011))Single copy price: 77.00Obtain an electronic copy from: OMunteanu@ASSE.orgOrder from: Ovidiu Munteanu, (847) 232-2012, OMunteanu@ASSE.orgSend comments (with copy to firstname.lastname@example.org) to: SameObtain an electronic copy from: http://cstools.asme.org/publicreviewOrder from: Mayra Santiago, ASME; email@example.comSend comments (with copy to firstname.lastname@example.org) to: Paul Stumpf, (212) 591-8536, email@example.comEOS/ESD (ESD Association, Inc.)ReaffirmationBSR/ESD STM2.1-2013 (R201x), ESD Association Standard Test Methodfor the Protection of Electrostatic Discharge Susceptible Items GarmentsResistive Characterization (reaffirmation of ANSI/ESD STM2.1-2013)This document applies to outer garments that utilize surface conductive ordissipative components or materials, used for static control applications.NOTE: The test methods defined in this document are not intended tomeasure materials with buried conductive layers.Single copy price: 145.00 (Hardcover); 135.00 (Softcover)Obtain an electronic copy from: firstname.lastname@example.orgOrder from: Christina Earl, (315) 339-6937, email@example.comSend comments (with copy to firstname.lastname@example.org) to: Same
Standards Action - May 4, 2018 - Page 5 of 66 pagesEOS/ESD (ESD Association, Inc.)SCTE (Society of Cable Telecommunications Engineers)ReaffirmationNew StandardBSR/ESD STM4.2-1998 (R201x), ESD Association Standard Test Methodfor the Protection of Electrostatic Discharge Susceptible Items - ESDProtective Worksurfaces - Charge Dissipation Characteristics (reaffirmationof ANSI/ESD STM4.2-1998 (R2010))BSR/SCTE 17-201x, Test Procedure for Carrier to Noise (C/N, CCN, CIN,CTN) (new standard)This document provides a test method that measures the charge dissipationcharacteristics of worksurfaces. To accomplish this, a conductive test objectis charged, placed on the worksurface under test, and then removed. Theresultant charge on the test object is an indicator of the ability of the testedworksurface to dissipate charge from
TCIA (ASC A300) (Tree Care Industry Association) Revision BSR A300 Part 2-201x, Tree, Shrub, and Other Woody Plant Management - Standard Practices (Soil Management a. Assessment, b. Modification, c. Fertilization, and d. Drainage) (revision of ANSI A300 Part 2-2011) A300 (Part 2) Soil Management standards are performance standards for
time. The procedures of the American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American national Standards may receive current information on all standards by calling or writing the American National Standards .
time. The procedures of the American National Standards Institute require that action be taken to reaffirm, revise, or withdraw this standard no later than five years from the date of publication. Purchasers of American National Standards may receive current information on all standards by calling or writing the American National Standards .
377 amera realty co 378 ameracorp inc 379 american artist guild inc 380 american brake sv in 381 american brake sv of ga inc 382 american cheerleading inc 383 american general finance 384 american mkt & sales 385 american nail 386 american nail 387 american savings/ln 388 american welding 389 ameriquest technologies inc 390 amerivest mortgage co
AGMA American Gear Manufacturers Association AIA American Institute of Architects. AISI American Iron and Steel Institute ANSI American National Standards Institute, Inc. AREA American Railway Engineering Association ASCE American Society of Civil Engineers ASME American Society of Mechanical Engineers ASTM American Society for Testing and .
IEEE-SA STANDARDS BOARD OPERATIONS MANUAL 2022 . 3 . 2. Related documents . American National Standards Institute, ANSI Essential Requirements: Due process requirements for American National Standards (current edition). IEEE Standards Association Operations Manual. IEEE-SA Standards Board Bylaws.
Proposed American National Standards User Guide for Proposed American National Standards (ANS) related Data 6888 Elm Street, Suite 2D, McLean, VA 22101-3829 w: www.3-a.org 3-A (3-A Sanitary Standards, Inc.) BSR/3-A P3-A 004-200x, Standard For Vessels and Agitators For Use In The Manufacture of Active Pharmaceutical Ingredients (new standard)
4 Table of Contents Page Number(s) Preface 6 Introduction 7-8 How to Read the Standards 9 South Dakota Science Standards Kindergarten Science Standards 10-11 First Grade Science Standards 12 Second Grade Science Standards 13-14 Third Grade Science Standards 15-16 Fourth Grade Science Standards 17-18 Fifth Grade Science Standards 19
New standards being develop by Technical Committee are based on IEC Standards. (Adoption of IEC Standards). Revision of existing standards are being aligned to IEC Standards with National Differences as noted in the Standard. Technical Committees can add, modify or delete requirements based on: National regulatory requirements