VOL. 43, #51 December 21, 2012

3y ago
39 Views
2 Downloads
2.41 MB
40 Pages
Last View : 2d ago
Last Download : 2m ago
Upload by : Abram Andresen
Transcription

PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036VOL. 43, #51December 21, 2012ContentsAmerican National StandardsCall for Comment on Standards Proposals .Call for Members (ANS Consensus Bodies) .Final Actions .Project Initiation Notification System (PINS) .ANSI-Accredited Standards Developers Contact Information .2791217International StandardsISO Draft Standards .ISO Newly Published Standards .1820Registration of Organization Names in the U.S. .Proposed Foreign Government Regulations .Information Concerning .Standards Action Publishing Schedule for 2013 .23232439American National StandardsCall for comment on proposals listedThis section solicits public comments on proposed draft newAmerican Nat ional Standards, including t he national adoption ofIS O and IEC st andards as A merican Nat ional Standards, and onproposals to revise, reaff irm or withdraw approval of existingAmerican Nat ional Standards. A draft standard is list ed in thissection under t he ANSI-acc redited standards developer (A SD)that sponsors it and from whom a c opy may be obtained.Comments in connect ion with a draft Americ an NationalS tandard must be s ubmitted in writing to the A SD no lat er thanthe last day of the c omment period specified herein. Suchcomments shall be specific to the section(s) of the st andardunder review and include sufficient detail so as to enable thereader t o understand the commenter's pos it ion, concerns andsuggested alternative language, if appropriate. Please note thatthe ANSI E xecutive S tandards Council (E xSC) has determinedthat an AS D has the right to require that int erested parties submitpublic review comments elect ronically, in accordance with thedeveloper’s procedures.Order ing Instructions for "Call-for-Comment" Listings1. Order from the organizati on indicated for the specificpr oposal.2. Use the full identification in your order, including theBS R prefix; for exam ple, Electric Fuses BSR/S AE J554.3. Include rem ittance w ith all orders.4. BS R proposal s wi ll not be availabl e after the deadline ofcal l for comm ent.Comments should be addressed to the organization indic ated,with a copy to the B oard of Standards Review, AmericanNational S tandards Institut e, 25 Wes t 43rd St reet , New York,NY 10036. Fax: 212-840-2298; e-mail: psa@ansi.org*S tandard for consumer products 2012 by American National S tandards Institut e, Inc.A NS I members may reproduc e for internal dist ribution. Journals may excerpt items in their fieldsISSN 0038-9633

Standards Action - December 21, 2012 - Page 2 of 40 PagesComment Deadline: January 20, 2013ASHRAE (American Society of Heating, Refrigeratingand Air-Conditioning Engineers, Inc.)Comment Deadline: February 4, 2013AddendaAPCO (Association of Public-Safety CommunicationsOfficials-International)BSR/ASHRAE Addendum 161g-201x, Air Quality within Commercial Aircraft(addenda to ANSI/ASHRAE Standard 161P-2007)New StandardThis standard defines the requirements for air quality in air-carrier aircraftand specifies methods for measurement and testing in order to establishcompliance with the standard.BSR/APCO 3.106.1-201x, Core Competencies and Minimum TrainingStandards for Public Safety Communications Quality Assurance Evaluator(new standard)Click here to view these changes in fullTo identify the core competencies and minimum training standards for PublicSafety Communications quality assurance evaluators.Send comments (with copy to psa@ansi.org) to: Online Comment Databaseat http://www.ashrae.org/public-review-draftsSingle copy price: FreeObtain an electronic copy from: SD (ESD Association, Inc.)Order from: Crystal McDuffie, (919) 625-6864, mcduffiec@apcointl.org;standards@apcointl.orgNew StandardSend comments (with copy to psa@ansi.org) to: SameBSR/ESD SP3.4-201x, ESD Association Standard Practice for the Protectionof Electrostatic Discharge Susceptible Items - Periodic Verification of AirIonizer Performance Using a Small Test Fixture (new standard)This standard practice establishes measurement procedures, underrecommended conditions, to periodically determine offset voltage (ionbalance) and discharge (charge neutralization) times for ionizers in theiractual use locations. This standard practice does not include measurementsof electromagnetic interference (EMI), or uses of ionizers in connection withordnance, flammables, explosive items, or electrically initiated explosivedevices. Review is limited to strikethrough and underline text only.Click here to view these changes in fullSend comments (with copy to psa@ansi.org) to: Christina Earl, (315) 339-6937, cearl@esda.orgASC X9 (Accredited Standards Committee X9,Incorporated)ReaffirmationBSR X9.101/ISO 6166-201x, Securities and related financial instruments International securities identification numbering systems (ISIN) (reaffirmationof ANSI X9.101/ISO 6166-2003)This Standard provides a uniform structure for international securitiesidentification numbers (ISINs). It is intended for use in any application in thetrading and administration of securities and other financial instruments.Single copy price: 60.00Obtain an electronic copy from: janet.busch@x9.orgOrder from: Janet Busch, (410) 267-7707, janet.busch@x9.orgEOS/ESD (ESD Association, Inc.)Send comments (with copy to psa@ansi.org) to: SameRevisionBSR/ESD SP3.3-201x, ESD Association Standard Practice for the Protectionof Electrostatic Discharge Susceptible Items - Periodic Verification of AirIonizers (revision of ANSI/ESD SP3.3-2006)This standard practice establishes measurement procedures, underrecommended conditions, to periodically determine offset voltage (ionbalance) and discharge (charge neutralization) times for ionizers in theiractual use locations. This standard practice does not include measurementsof electromagnetic interference (EMI), or uses of ionizers in connection withordnance, flammables, explosive items, or electrically initiated explosivedevices. Review is limited to strikethrough and underline revisions.Click here to view these changes in fullSend comments (with copy to psa@ansi.org) to: Christina Earl, (315) 339-6937, cearl@esda.orgASC X9 (Accredited Standards Committee X9,Incorporated)ReaffirmationBSR X9.8 Part 1-2003 (R201x), Personal Identification Number PINManagement (reaffirmation of ANSI X9.8 Part 1-2003)Basic principles and techniques which provide the minimum securitymeasures required for effective international PIN management. PINprotection techniques applicable to financial transaction card originatedtransactions in an online environment and a standard means ofinterchanging PIN data.Single copy price: 100.00Obtain an electronic copy from: janet.busch@x9.orgOrder from: Janet Busch, (410) 267-7707, janet.busch@x9.orgTCIA (ASC A300) (Tree Care Industry Association)RevisionBSR A300 (Part 3)-201x, Tree Care Operations - Tree, Shrub, and OtherWoody Plant Management - Standard Practices (Supplemental SupportSystems) (revision of ANSI A300 (Part 3)-2006)A300 (Part 3) Supplemental Support Systems standards are performancestandards for the installation of supplemental support systems for trees.Cabling, bracing, propping, and guying support methods are addressed. It isa guide in the drafting of supplemental support system specfications forconsumers as well as federal, state, municipal, and private authoritiesincluding property owners, property managers, and utilities.Click here to view these changes in fullSend comments (with copy to psa@ansi.org) to: Robert Rouse, (603) 314-5380 ext. 117, Rouse@tcia.orgSend comments (with copy to psa@ansi.org) to: Same

Standards Action - December 21, 2012 - Page 3 of 40 PagesASME (American Society of Mechanical Engineers)BHMA (Builders Hardware Manufacturers Association)RevisionRevisionBSR/ASME BPVC Section V-201x, Nondestructive Examination (revision ofANSI/ASME BPVC Section V-2010)BSR/BHMA A156.1-201x, Standard for Butts and Hinges (revision ofANSI/BHMA A156.1-2006)Section V of the ASME Boiler & Pressure Vessel Code containsrequirements and methods for nondestructive examination (NDE) which arereferenced and required by other Sections of the Code. These NDEmethods are intended to detect surface and internal imperfections inmaterials, welds, fabricated parts and components. The following NDEmethods are addressed: radiography, ultrasonics, liquid penetrant, magneticparticle, eddy current, visual, leak testing, and acoustic emission.This Standard establishes requirements for lightweight, standard weight,heavy weight and detention hinges. Cycle tests, lateral and vertical weartests, friction tests, strength tests, finish tests, and material and dimensionalrequirements are included.Single copy price: FreeObtain an electronic copy from: http://cstools.asme.org/publicreviewSingle copy price: 36.00 (Nonmembers)/ 18.00 (BHMA Members)Order from: Michael Tierney, (212) 297-2127, mtierney@kellencompany.comSend comments (with copy to psa@ansi.org) to: SameOrder from: Mayra Santiago, ASME; ANSlBOX@asme.orgSend comments (with copy to psa@ansi.org) to: Joseph Brzuszkiewicz,(212) 591-8533, brzuszkiewiczj@asme.orgCSA (CSA Group)RevisionAWWA (American Water Works Association)RevisionBSR/AWWA F101-201x, Contact-Molded, Fiberglass-Reinforced PlasticWash-Water Troughs and Launders (revision of ANSI/AWWA F101-2007)This standard describes the minimum requirements for fiberglass-reinforcedplastic wash-water troughs and launders made by the contact-moldingprocess, including flat-bottom, round-bottom, and V-bottom troughs andlaunders. Requirements are included for materials, properties, design,construction, dimensions, tolerances, work quality, and appearance. Thisstandard also describes the requirements for using general-purpose andchemical-resistant resins.Single copy price: 20.00Obtain an electronic copy from: vdavid@awwa.orgOrder from: Paul Olson, (303) 347-6178, polson@awwa.orgSend comments (with copy to psa@ansi.org) to: SameAWWA (American Water Works Association)BSR Z21.11.2a-201x, Standard for Gas-Fired Room Heaters, Volume II,Unvented Room Heaters (revision of ANSI Z21.11.2a-2008)Details test and examination criteria for unvented heaters for use withnatural, manufactured and mixed gases, liquefied petroleum gases, and LPgas-air mixtures. Such heaters are limited to Maximum input ratings of40,000 Btu per hour.Single copy price: 50.00Obtain an electronic copy from: cathy.rake@csagroup.orgOrder from: Cathy Rake, (216) 524-4990, cathy.rake@csagroup.orgSend comments (with copy to psa@ansi.org) to: SameECA (Electronic Components Association)RevisionBSR/EIA 364-31D-201x, Humidity Test Procedure for Electrical Connectorsand Sockets (revision of ANSI/EIA 364-31C-2008)The purpose of these tests is to evaluate materials and/or connector/socketassemblies as they are impacted by the effects of high humidity and heat.These tests are intended to be noncondensing.RevisionSingle copy price: 80.00BSR/AWWA F102-201x, Match-Die-Molded, Fiberglass-Reinforced PlasticWeir Plates, Scum Baffles, and Mounting Brackets (revision of ANSI/AWWAF102-2007)Obtain an electronic copy from: global.ihs.com 1-877-413-5184This standard describes the minimum requirements for fiberglass-reinforcedplastic weir plates, scum baffles, mounting brackets, lap plates, coverwashers, and weir pans, fabricated with the matched-die molding process.Included are requirements for design, construction, dimensions, tolerances,physical properties, work quality, appearance, and installation. This standardcontains the requirements for using general-purpose and chemical-resistantresins.Send comments (with copy to psa@ansi.org) to: Edward Mikoski, (571) 323-0253, emikoski@eciaonline.org; ldonohoe@eciaonline.orgSingle copy price: 20.00New StandardObtain an electronic copy from: vdavid@awwa.orgBSR/N14.36-201x, Measurement of Radiation Level and SurfaceContamination for Packages and Conveyances (new standard)Order from: Paul Olson, (303) 347-6178, polson@awwa.orgSend comments (with copy to psa@ansi.org) to: SameOrder from: Global Engineering Documents, (800) 854-7179, www.global.ihs.comINMM (ASC N14) (Institute of Nuclear MaterialsManagement)This standard sets forth methods for radiation and contaminationmeasurement for packaging and transportation of radioactive material by alltransportation modes and during all phases of transportation activities. Theobjective of this standard is to provide users with an approach toconformance with regulations that control residual surface contamination andexternal radiation of shipping packages and conveyances.Single copy price: FreeObtain an electronic copy from: N14Secretary@yahoo.comOrder from: Ronald Natali, (435) 258-3730, N14Secretary@yahoo.comSend comments (with copy to psa@ansi.org) to: N14Secretary@yahoo.com

Standards Action - December 21, 2012 - Page 4 of 40 PagesITI (INCITS) (InterNational Committee for InformationTechnology Standards)TAPPI (Technical Association of the Pulp and PaperIndustry)New National AdoptionNew StandardINCITS/ISO 19144-2-201x, Geographic information - Classification systems-- Part 2: Land Cover Meta Language (LCML) (identical national adoption ofISO 19144-2:2012)BSR/TAPPI T 410 om-201x, Grammage of paper and paperboard (weightper unit area) (new standard)This part of ISO 19144 specifies a Land Cover Meta Language (LCML)expressed as a UML metamodel that allows different land coverclassification systems to be described based on the physiognomic aspects.This part of ISO 19144 also specifies the detailed structure of a register forthe extension of LCML but does not specify the maintenance of the register.This part of ISO 19144 recognizes that there exist a number of land coverclassification systems. It provides a common reference structure for thecomparison and integration of data for any generic land cover classificationsystem, but does not intend to replace those classification systems.The area of several sheets of the paper or paperboard is determined fromlinear measurements and the mass (commonly called “weight”) isdetermined by weighing. The grammage is calculated from the ratio of themass to the area after conversion to metric units when necessary.Single copy price: FreeObtain an electronic copy from: standards@tappi.orgOrder from: Charles Bohanan, (770) 209-7276, standards@tappi.orgSend comments (with copy to psa@ansi.org) to: SameSingle copy price: 250.00Obtain an electronic copy from: http://www.incits.org or http://webstore.ansi.orgOrder from: Global Engineering Documents, (800) 854-7179, www.global.ihs.comSend comments (with copy to psa@ansi.org) to: Barbara Bennett, (202) 626-5743, bbennett@itic.orgITI (INCITS) (InterNational Committee for InformationTechnology Standards)New National AdoptionINCITS/ISO 19144-1-201x/Cor 1-201x, Geographic information Classification systems - Part 1: Classification system structure, TechnicalCorrigendum 1 (identical national adoption of ISO 19144-1:2009/Cor 1:2012)This Technical Corrigendum affects Part 1 of ISO 19144, which establishesthe structure of a geographic information classification system, together withthe mechanism for defining and registering the classifiers for such a system.It specifies the use of discrete coverages to represent the result of applyingthe classification system to a particular area and defines the technicalstructure of a register of classifiers in accordance with ISO 19135.Single copy price: FreeObtain an electronic copy from: http://www.incits.org or http://webstore.ansi.orgOrder from: Global Engineering Documents, (800) 854-7179, www.global.ihs.comSend comments (with copy to psa@ansi.org) to: Barbara Bennett, (202) 626-5743, bbennett@itic.orgTAPPI (Technical Association of the Pulp and PaperIndustry)New StandardBSR/TAPPI T 512 sp-201x, Creasing of flexible packaging material paperspecimens for testing (new standard)This standard practice describes a creasing procedure for tests requiringcreased specimens of flexible packaging materials made of paper or paperbased materials. In most instances, it is advantageous to compare theresults of the creased specimens with those of uncreased specimens. Thisstandard practice is not applicable to board grades (those exceeding 0.25mm [0.01 in.] in thickness).Single copy price: FreeObtain an electronic copy from: standards@tappi.orgOrder from: Charles Bohanan, (770) 209-7276, standards@tappi.orgSend comments (with copy to psa@ansi.org) to: SameTAPPI (Technical Association of the Pulp and PaperIndustry)New StandardBSR/TAPPI T 834 om-201x, Determination of containerboard roll hardness(new standard)This test method describes a procedure to determine the uniformity inrelative hardness of rolls of containerboard. Since several devices arecurrently available that use significantly differing technologies to determinehardness, this method only addresses the actual measurement process andnot the test equipment specifically.Single copy price: FreeTAPPI (Technical Association of the Pulp and PaperIndustry)Obtain an electronic copy from: standards@tappi.orgNew StandardSend comments (with copy to psa@ansi.org) to: SameBSR/TAPPI T 271 om-201x, Fiber length of pulp and paper by automatedoptical analyzer using polarized light (new standard)This is an automated method by which the numerical and weighted averagefiber lengths and fiber length distributions of pulp and paper can bemeasured using light polarizing optics in the range of 0.1 mm to 7.2 mm.Single copy price: FreeObtain an electronic copy from: standards@tappi.orgOrder from: Charles Bohanan, (770) 209-7276, standards@tappi.orgSend comments (with copy to psa@ansi.org) to: SameOrder from: Charles Bohanan, (770) 209-7276, standards@tappi.org

Standards Action - December 21, 2012 - Page 5 of 40 PagesTCIA (ASC A300) (Tree Care Industry Association)UL (Underwriters Laboratories, Inc.)New StandardNew StandardBSR A300 (Part 8)-201x, Tree Care Operations - Tree, Shrub, and OtherWoody Plant Management - Standard Practices (Root Management) (newstandard)BSR/UL 2565-201x, Standard for Safety for Manual and SemiautomaticMetal Sawing Machines (new standard)A300 (Part 8) Root Management standards will be performance standardsfor the management of roots. Methods for root pruning and cutting, directingroot growth, and managing roots in fill are addressed. It will be a guide inthe drafting of root management specifications for consumers as well asfederal, state, municipal, and private authorities including property owners,property managers, and utilities.Single copy price: Electronic copy -Free; Paper copies - 15.00 each forS&HObtain an electronic copy from: rrouse@tcia.orgOrder from: Robert Rouse, (603) 314-5380 ext. 117, Rouse@tcia.orgThis standard covers manual and semi-automatic metal sawing machinesthat use a saw blade (tool) to cut off or change the shape of the work pieceand are intended for use in industrial or commercial applications. Machinesare manually operated or capable of performing one cutting cycle ofoperation, which is manually actuated.Single copy price: Contact comm2000 for pricing and delivery optionsObtain an electronic copy from: http://www.comm-2000.comOrder from: comm2000Send comments (with copy to psa@ansi.org) to: Beth Northcott, (847) 664-3198, Elizabeth.Northcott@ul.comSend comments (with copy to psa@ansi.org) to: SameTCIA (ASC A300) (Tree Car

Send comments (with copy to psa@ansi.org) to: Christina Earl, (315) 339-6937, cearl@esda.org TCIA (ASC A300) (Tree Care Industry Association) Revision BSR A300 (Part 3)-201x, Tree Care Operations - Tree, Shrub, and Other Woody Plant Management - Standard Practices (Supplemental Support Systems) (revision of ANSI A300 (Part 3)-2006)

Related Documents:

Menschen Pagina 20 Schritte international Neu Pagina 22 Motive Pagina 24 Akademie Deutsch Pagina 25 Starten wir! Pagina 26 Themen aktuell Pagina 28 em neu Pagina 29 Sicher! Pagina 30 Vol A1 1 Vol A1 Vol 1 Vol 1 2 Vol unico Vol 1 Volume 1 Volume 1 Vol 1 Vol 1 1 Vol A1 2 Vol 2 Vol 1 2 Vol A2 1 Vol A2 Vol 3 Vol

Akenson, Donald Harman Vol 8: 10 Alan, Radous, at Agincourt Vol 12: 1 Albert, King Vol 7: 45, 47 Albert, Prince Vol 12: 17; Vol 14: 1 Alden, John Vol 5: 34; Vol 9: 18 Alexander III Vol 13: 24 Aleyn, John, at Agincourt Vol 12: 1 Allen, Pat Vol 10: 44 Alling Vol 4: 26 Amore, Shirley Vol 12: 3 Anderson, Robert Vol 10: 46 Anderson, Virginia DeJohn .

December 2014 Monday December 1. Tuesday December 2. Wednesday December 3. Thursday December 4. Friday December 5. Saturday December 6. Sunday December 7. Monday December 8. Tuesday December 9 - Fall Semester Ends. Wednesday December 10- Reading Day. Thursday December 11- Final Examinatio

Mary Wolf—December 14 —December 6 Youth Birthdays Adelaide Bass—December 30 Addy Chytka—December 21 Nyabuay Diew—December 17 Quinn Feenstra—December 8 Blaine Fischer—December 21 Liam Fischer—December 22 Danielle Krontz—December 10 Hunter Lake—December 22 Hailey Lieber—December 15

Canadian Journal of Mathematics, Vol.2 (1950) to Vcl.19 Canadian J. (1967) (Canada) Makh. Comptes Rendus, Des Seances de l'Acaddmie des Sciences. Comptes Paris, Vol.230 (1950) to Vol.265 (1967) (France) Rendus Crod Science, Vol.1 (1961) to Vol.7 (1967) (U.S.) Crop Sci. Current Science, Vol.19 (1950) to Vol.36 (1967) (India) Current Scd. Der .

Vino Nobile Di Montepulciano Riserva Primitivo Di Manduria I.G.T Nero D’Avola I.G.T., Sicilia Salice Salentino Riserva Peppoli Antinori 2013, Chianti classico 13,5 % Vol 14 % Vol 13,5 % Vol 13,5 % V 13,5 % Vol 14 % Vol 13 % Vol Tignanello 201313 % Vol 29 34 38 26,5 29 39 39 235 24. 28. 30

Winter Break Begins/No Classes December 20 December 16 December 17 December 16 College Closed December 21 December 17 December 18 December 17 SPRING SEMESTER Spring Semester Begins : January 7, 2020 . January 5, 2021 : January 4, 2022 . January 4, 2023 : Martin Luther King Day/College Closed January 20 January 18 January 17 January 16

2 Annual Book of ASTM Standards, Vol 01.06. 3 Annual Book of ASTM Standards, Vol 01.01. 4 Annual Book of ASTM Standards, Vol 15.08. 5 Annual Book of ASTM Standards, Vol 03.02. 6 Annual Book of ASTM Standards, Vol 02.05. 7 Annual Book of ASTM Standards, Vol 01.08. 8 Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700 Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS .