Download Serial Wire Debug (SWD) Programming Specification [PDF]

  • Description: Reset, halt, and resume the execution of the processor . Modify core registers of the processor to change its execution context and flow. Full access to the processor’s memory space to download data to be programmed. This document discusses the theory of SWD operation and show s the detailed steps required for programming..

  • Size: 966.33 KB

  • Type: PDF

  • Pages: 61

  • This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form.

    Report this link

Share first without download waiting.

Related Documents:

JTAG/SWD The JTAG/SWD connector J1 is used for program download and debug. This is a 2x5 fine pitch (0.050") ARM JTAG connector, see (Figure 2-3) for signal definition. The LM3S9D92 microcontroller supports JTAG debug, Serial Wire Debug (SWD), and Serial Wire Out (SWO) trace with this connector.

JTAG/SWD The JTAG/SWD connector J1 is used for program download and debug. This is a 2x5 fine pitch (0.050") ARM JTAG connector, see (Figure 2-3) for signal definition. The LM3S9B92 microcontroller supports JTAG debug, Serial Wire Debug (SWD), and Serial Wire Out (SWO) trace with this connector.

(0.050") ARM JTAG connector, see (Figure 2-3) for signal definition. The LM3S9B90 microcontroller supports JTAG debug, Serial Wire Debug (SWD), and Serial Wire Out (SWO) trace with this connector. The ICDI board connects via a 10-wire ribbon cable to this connector. Figure 2-3. JTAG/SWD Connector GPIO Pads - Top left HDN AKE A T 0 1 PD 2 3 .

Send documentation comments to mdsfeedback-doc@cisco.com. Contents x Cisco MDS 9000 Family Command Reference OL-6970-03, Cisco MDS SAN-OS Release 2.x debug klm 6-70 debug license 6-72 debug logfile 6-73 debug mcast 6-75 debug mip 6-77 debug module 6-78 debug ntp 6-79

black black white white white white red green blue black Wire 3 Wire 3 Wire 4 Wire 4 Wire 5 Wire 6 Wire 8 Wire 7 Wire 2 e 2 Wire-number Wire color Wire-number e color For multicolor configurations For all other configurations * internal pull-up resistor to vcc 3.3 V Dimension 15.15

IAR - Build for Debug i7. Select Debug Build, and Select Debugger - Use Debug Build for development, output is a “C Spy” file which includes Debug Information - Allows “C Code” debug using IAR Debugger: data and functions are accessed by their C Code names. - You can use a tool like JT

Wire Size Wire Size 20.75mm 1.50mm2 E1010RD EN2502 (10mm) (12mm) Wire Size Wire Size 21.00mm2 2.50mm E1510BK EN4012 (10mm) (12mm) Wire Size 21.50mm 4.00mm2 E2512GY EN6012 (12mm) (12mm) Wire Size Wire Size 2.50mm2 26.00mm E4012OR EN10012 (12mm) (12mm) Wire Size Wire Size 4.00mm2 10.00mm E6012GR EN61018 (12mm) Wire Size Wire Size 26.00mm2 16.00mm .

7 Connections to be made Installing the interface From the 7803 harness to the aftermarket radio: Connect the Black wire to the ground wire. Connect the Yellow wire to the battery wire. Connect the Red wire to the accessory wire. Connect the Blue wire to the power antenna wire. If the aftermarket radio has an illumination wire, connect the Orange wire to it.

School; 10 Days} All SWD Relative Risk(RR) for District Level OSS 10 days 2.0 for FY12 and 2.0 for FY13 SWD count 5 per subgroup (RR compares district risk to state risk) Do SWD have equal risks for disciplinary removals

1 TXD O (1) Serial port (Transmitted Data) 2 DTR_N O (1) Serial port (Data Terminal Ready) 3 RTS_N O (1) Serial port (Request To Send) 4 VDD_325 P RS232 VDD. The power pins for the serial port signals. When the serial port is 3.3V, this should be 3.3V. When the serial port is 2.5V, this should be 2.5V. 5 RXD I (2) Serial port (Received Data)

The Moly-Cop Ropes supplied the mining wire rope samples and the information on their mechanical per-formance as listed below: wire rope A wire rope B wire rope C - wire rope D wire rope E. The manufac- turers of these wire ropes have not released chemical compositions, structures of these wire ropes. 3.2. ATR-FTIR Measurements

The Ember Development Kit supports network debug connected to Ethernet through its Debug Adapter (ISA3), which also takes node activity accessible to the Ember Desktop network analyzer utility. Together, Debug Adapters (ISA3s) and Ember Desktop provide an integrated development environment where you can perform a number of tasks, including:File Size: 398KB

Business provides valuable call reporting and statistics to Cisco customers. Infortel enables customers to manage telecom expenses by tracking call trends, identifying potential fraud, . Enable the following debug processes to monitor the FTP and CDR activity: debug voip fileacct debug voip dump-file-acct debug ip ftp events

The EFM32 implementation of the Cortex-M3 is described in detail in EFM32 Cortex-M3 Reference Manual. 2.1.2 Debug Interface (DBG) This device includes hardware debug support through a 2-pin serial-wire debug interface and an Embed-ded Trace Module (ETM) for data/instruction traci

The EFM32 implementation of the Cortex-M3 is described in detail in EFM32 Cortex-M3 Reference Manual. 2.1.2 Debug Interface (DBG) This device includes hardware debug support through a 2-pin serial-wire debug interface and an Embed-ded Trace Module (ETM) for data/instruction traci

The EFM32 implementation of the Cortex-M3 is described in detail in EFM32 Cortex-M3 Reference Manual. 2.1.2 Debug Interface (DBG) This device includes hardware debug support through a 2-pin serial-wire debug interface and an Embed-ded Trace Module (ETM) for data/instruction traci

The EFM32 implementation of the Cortex-M3 is described in detail in EFM32 Cortex-M3 Reference Manual. 2.1.2 Debug Interface (DBG) This device includes hardware debug support through a 2-pin serial-wire debug interface and an Embed-ded Trace Module (ETM) for data/instruction traci

The EFM32 implementation of the Cortex-M3 is described in detail in EFM32 Cortex-M3 Reference Manual. 2.1.2 Debug Interface (DBG) This device includes hardware debug support through a 2-pin serial-wire debug interface and an Em-bedded Trace Module (ETM) for data/instruction

The EFM32 implementation of the Cortex-M3 is described in detail in EFM32 Cortex-M3 Reference Manual. 2.1.2 Debug Interface (DBG) This device includes hardware debug support through a 2-pin serial-wire debug interface and an Embed-ded Trace Module (ETM) for data/instruction traci

luxury week long cruise in the Pacific Ocean. You encountered a bad storm and the clipper ship limped to shore and partially sank. Only the top is still visible off the north tip of the island. You are all now stranded on an uninhabited island in the middle of the Pacific Ocean. The storm basically ruined most things on board, leaving very few useful items. Your task is choose the 12 most .