Computer Monitor-Page 2
Without monitor stand With monitor stand 1 2 3. About your monitor 9 Bottom view, without monitor stand Label Description Use 1 Power port To connect the monitor power cable. 2 3 VGA port HDMI port 1 2
positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
The monitor for TOPAZ LCD model is already attached to the unit. Do the following to connect the monitor's video cable to the TOPAZ: 1. Locate the video cable attached to the back of the monitor. If you have an LCD monitor, you must connect the video cable to the back of the monitor. Find the rectangular, multi-
LCD Monitor User's Manual GETTING STARTED Installing the Monitor Base 1. Place the monitor on a flat surface, with the screen facing down. Note: We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 2. Align the monitor base with the standoff underneath the stand. Then attach the base onto the stand. 3.
(Dual-Monitor Arm, Single Monitor Arm, Monitor Arm Laptop Stand) If your monitor is too heavy (arm won't stay up) or too light (arm won't stay down), you need to . adjust the spring arm tension to hold them at the right height. Insert the long M6 Allen Wrench that came with your Monitor Arm into the . opening to adjust the tension bolt.
positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Device# monitor capture mycap start *Aug 20 11:02:21.983: %BUFCAP-6-ENABLE: Capture Point mycap enabled.on Device# show monitor capture mycap parameter monitor capture mycap interface capwap 0 in monitor capture mycap interface capwap 0 out monitor capture mycap file location flash:mycap.pcap buffer-size 1 Device# Device# show monitor capture mycap
Cisco IOS Embedded Packet Capture Command Reference 3 monitor capture through show monitor capture monitor capture. Command History Release Modification 12.2(33)SXI Thiscommandwasintroduced. Usage Guidelines Thebuffer sizekeywordsandargumentdefines thebuffer thatisusedtostore packet. . monitor capture .
2. WALI Dual Monitor Desk Mount Instruction Manual INSTALLATION MANUAL Dual Monitor Desk Mount M002 Supplied Parts List. 3. WALI Laptop Tray Desk Mount Installation Guide INSTALLATION MANUAL Laptop Tray Desk Mount M00LP Supplied Parts. 4. Wali Single Monitor Desk Stand Installation Guide Wali Single Monitor Desk Stand Single Monitor Desk Stand
![[1]Oracle GoldenGate Using Oracle GoldenGate Monitor 12c (12.2.1)](/img2/247/gmnch.webp)
For more information, see the following documents in the Oracle GoldenGate Monitor documentation set: Administering Oracle GoldenGate Monitor Installing and Configuring Oracle GoldenGate Monitor Server Upgrading to Oracle GoldenGate Monitor Server 12.2.1 Installing and Configuring Oracle GoldenGate Monitor Agent
Turn on the monitor by pressing the power button on the monitor. Turn on the computer too, and follow the instructions in Getting the most from your BenQ monitor on page 24 to install the monitor software. To extend the service life of the product, we recommend that you use yo
Turning on your monitor and computer Note: Before setting up your monitor, ensure that you have read and understood the "Safety information" on page iii. Assembling your monitor To assemble your monitor, follow the four parts below one by one: Part 1: Install the full-function monitor stand. Part 2: Install the Tiny.