Test Report Iec 60950 1 2005 2nd Edition And Or En-PDF Free Download

Safety: EN 60950-1, IEC 60950-1, UL 60950-1, CSA-C22.2 No.60950-1, EN 60950-22, UL 60950-22, CSA C22.2.60950-22 Storage: ETSI EN 300 019-1-1 Class 1.2 Transportation: ETSI EN 300 019-1-2 Class 2. Ingress Protection: IP67 Security HTTPS SNMPv3 SSH SFTP RADIUS authentication and authorization TACACS Authentication, Authorization, and Accounting

Safety: EN 60950-1, IEC 60950-1, UL 60950-1, CSA-C22.2 No.60950-1, EN 60950-22, UL 60950-22, CSA C22.2.60950-22 Storage: ETSI EN 300 019-1-1 Class 1.2 Transportation: ETSI EN 300 019-1-2 Class 2. Technical Specifications Mechanical Specifications Dimensions - 9.05"(H), 9.07"(W), 3.86"(D), 13.23 lbs.

Safety EN 60950-1 EN 60950-22 UL 60950-1 UL 60950-22 IEC 62471 CAN/CSA-C22.2 No. 60950-1 CAN/CSA-C22.2 No. 60950-22-07 Image performance IEC 62676-5 HD SMPTE 296M-2001 (Resolution: 1280x720) SMPTE 274M-2008 (Resolution: 1920x1080) Color representation ITU-R BT.709-6 ONVIF conformance EN 50132-5-2

IEC 61215 IEC 61730 PV Modules Manufacturer IEC 62941 IEC 62093 IEC 62109 Solar TrackerIEC 62817 PV Modules PV inverters IEC 62548 or IEC/TS 62738 Applicable Standard IEC 62446-1 IEC 61724-1 IEC 61724-2 IEC 62548 or IEC/TS 62738 IEC 62548 or IEC/TS 62738 IEC 62548 or IEC/TS 62738 IEC 62548 or IEC/

Safety Standards / Directives Safety Entry Low Voltage SELV (EN 60950) Electrical Safety TUV Bauart EN 60950-1, EN 62368-1 UL/cUL recognized UL 60950-1 and CSA C22.2No. 60950 -1 (File No. E131881) UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E131881) CB scheme IEC 60950-1, IEC 62368-1, Limited Power Source (LPS)

IEC has formed IECRE for Renewable Energy System verification - Component quality (IEC 61215, IEC 61730, IEC 62891, IEC 62109, IEC 62093, IEC 61439, IEC 60947, IEC 60269, new?) - System: - Design (IEC TS 62548, IEC 60364-7-712, IEC 61634-9-1, IEC 62738) - Installation (IEC 62548, IEC 60364-7-712)

Standards (NEBS) GR-63-CORE GR-1089-CORE Safety UL 60950-1 Second Edition CAN/CSA-C22.2 No. 60950-1 Second Edition EN 60950-1 Second Edition IEC 60950-1 Second Edition AS/NZS 60950 -1 GB4943 EMC Standards 47CFR Part 15 (CFR 47) Class A CISPR32 Class A EN55032 Class A

# National differences to IEC 60950-1:2005 A1 evaluated. Also Japanese national deviation evaluated according to IEC 60950-1:2005. . UL 1310 Class 2 Power Units under UL 60950-1 clause 4.3.6 national difference requirements: 4.3.6 - Direct plug-in blade securement test 4.3.6 - Direct plug-in security of input contacts .

No. 60950-1/UL 60950-1, Second Edition, is based on the Second Edition of IEC 60950-1, and like its predecessors includes U.S./Canadian Deviations to address National requirements not in the base IEC document. This Standard was published on March 27, 2007. November 14, 2007

IEC 61869-9, IEC 62351 (all parts), IEC 62439-1:2010, IEC 62439-3:2010, IEC 81346 (all parts), IEC TS 62351- 1, IEC TS 62351- 2, IEC TS 62351- 4, IEC TS 62351- 5, Cigre JWG 34./35.11, IEC 60044 (all parts), IEC 60050 (all parts), IEC 60270:2000, IEC 60654-4:1987, IEC 60694:1

This CB Report is a reissue of CBTR Ref. E141114-A4-CB-1, CB Test Certificate No. US/15875/UL due to upgrading the Test Report from IEC/UL 60950-1 2nd Edition to IEC/UL 60950-1 2nd Edition, Amendment 1. Summary of Testing indicates that all required tests were conducted during the previous investigations under

60950 * UL 60950, Third Edition, which are based on the IEC 60950, Third Edition 1999. 1.2.5.1 Connection to the Supply The terminals and connectors are suitable for field wiring with the restriction of using ferrules. The unit is tested for connection to mains with a maximum 32 A branch circuit.

Clearance Distance Data as per UL-60950/IEC-60950 1.2.8 Circuits and circuit characteristics 1.2.8.3 MAINS SUPPLY : power distribution system that is either an AC MAINS SUPPLY or a DC MAINS SUPPLY 1.2.8.1 AC MAINS SUPPLY: a.c. power distribution system external to the equipment for supplying power to a.c. powered equipment

IEC 61051-1 IEC 61051-2 IEC 60950-1 (Annex Q) for 14mm and 20mm only 116895 1 CECC 42201-006 IEC 61051-1 IEC 61051-2 IEC 60950-1 (Annex Q) for 10mm, 14mm and 20mm only IECQ-C BSI 14.0001 1 IEC/EN 61051-1 . V10E320P P10V320 V10P320P P10P320

UL: UL 60950-1; CB: IEC 60950-1:2005 Am 1:2009 Am 2:2013, IEC 62368-1:2014; . CE-LVD: EN 60950-1:2005 Am 1:2009 Am 2:2013, IEC 62368-1:2014; BIS: IS 13252(Part 1):2010 A1:2013 A2:2015 環境性 CE-RoHS: 2011/65/EU; WEEE: 2012/19/EU; Reach: Regulation (EC) No 1907/2006 保護等級 防水・防塵(IP67): IEC 60529-2013;

IEC 60950-1 and the relevant component standard. Components, for which no relevant IEC-standard exists, have been tested under the conditions occurring in the equipment, using applicable parts of IEC 60950-1. P 1.5.3 Thermal controls No thermal controls. N/A 1.5.4 Transformers No isolating transformer in the equipment. N/A

Access point Access point mode, WDS Bridging, Workgroup Bridge mode Environmental Power options IEEE 802.3af Ethernet switch Cisco Power Injector - SB-PWR-INJ2-xx AC adapter – SB-PWR-12V/1.5A power adapter in a box POE power Peak power: 9.5Watts Compliance Safety: UL 60950-1 CAN/CSA -C22.2 No. 60950 1 IEC 60950-1 EN 60950-1

standard system (EN-62676-4) for defining the ability of a person viewing the video to distinguish persons or objects within a covered area. The maximum . EN 60950-22 UL 62368-1 UL 60950-22 IEC 62471 (IR safety) CAN/CSA-C22.2 No. 60950-1 CAN/CSA-C22.2 No. 60950-22-07 Image performanceIEC 62676-5

IEC 60950-1 Clause Requirement Test Result - Remark Verdict TRF No. IEC60950_1F 1 GENERAL P 1.5 Components P 1.5.1 General P Comply with IEC 60950-1 or relevant component standard (see appended tables 1.5.1) P 1.5.2 Evaluation and testing of components All components are used within their ratings and comply withFile Size: 582KBPage Count: 49

Table 1 - IntelliCENTER IEC 61850 Integration Unit Specifications Attribute Value Standards UL 508A, EN55022, IEC 60950-1, EN55024, IEC 60950-22 VCCI, FCC, Part 15, Subpart B ICES-003 Enclosure Rating UL Type 4/12 and IP66 (IEC 60529) without PanelView Plus 7 Option UL Type 4 (indoor only)/12 and IP66 (IEC

Compressive Stress Test IEC 60794-1-2-E3 Cable Bend Test IEC 60794-1-2-E11 Impact Test IEC 60794-1-2-E4 Torsion Test IEC 60794-1-2-E7 Kink Test IEC 60794-1-2-E10 Temp. Cycling Test IEC 60794-1-2-F5 Repeated Bend Test IEC 60794-1-2-E6 Abrasion Requirement IEC 60794-1-2-E2

EN 60950-1 Clause Requirement Test Result - Remark Verdict Page 5 of 80 1 GENERAL P 1.5 Components P 1.5.1 General P Comply with IEC 60950-1 or relevant component standard Components that were found to affect safety aspects comply with the requirements of this standard or within the safety aspects of the relevant IEC component standards.

No.60950-1, EN 60950-22, UL 60950-22, CSA C22.2.60950-22 Storage: ETSI EN 300 019-1-1 Class 1.2 Transportation: ETSI EN 300 019-1-2 Class 2.3. Technical Specifications Mechanical Specifications Dimensions - 230mm(H), 233mm(W), 98mm(D), 6 kg Pole Diameter Range (for Remote Mount Installation) -

The new IEC 61439 series is expected to have a similar structure to IEC 60439 with several new additions*: IEC 60439 IEC 61439 Series IEC 61439-1 General rules IEC 61439-2 Power switchgear and controlgear assemblies IEC 61439-6 Busbar trunking systems IEC 61439-3 Distribution boards IEC 61439-4 Assemblies for construction sites IEC 61439-5

IEC 60060 / IEC 60071 High voltage test techniques./ Insulation coordination IEC 60099-4/ IEC 60859 Surge arresters/ Cable connections for GIS. IEC 60137 Bushings for alternating voltage above 1000V. IEC 60255/ IEC 60265 Electrical Relays./High voltage switches. IEC 60270 Partial discharge measurement. IEC 60376 / IEC 60480 Specification and .

UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 A11: 2009 A1: 2010 A12: 2011 A2: 2013, EN 62368-1: 2014 A11: 2017) Chemistry CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)

UL (UL 60950-1); CB (IEC 60950-1:2005, AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition); CE-LVD (EN 60950-1: 2006 A11: 2009 A1: 2010 A12: 2011 A2: 2013, EN 62368-1: 2014 A11: 2017) Chemistry CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC) No.1907/2006)

IEC 61968-4 IEC 61968- 6 IEC 61968-7 IEC 61968-8 IEC 61968-9 Applicable parts of IEC 61968 Series Network Operation (NO) IEC 61968-3 Operational Planning & Optimization (OP) IEC 61968-5 Bulk Energy Management (EMS) IEC 61970 & Applicable parts of IEC 61968 Series External Systems: Customer Account Management (ACT) Financial (FIN) Business .

IEC 60634-1 IEC 60050-826 IEC 60364-4-41 IEC 60364-4-42 IEC 60364-5-52 IEC/DIS 64(CO)9173 IEC 60204-32 IEC 60529-1989; IEC 60529 IEC 60529 Accident prevention regulation "Electrical systems and apparatus" Accident prevention regulatio

IEC 60034-7 IEC 60034-8 IEC 60034-9 IEC 60034-11 IEC 60034-12 IEC 60034-14 IEC 60034-30 IEC 60085 IEC 60038 IEC 60072 CEMER motors comply with the relevant European and International norms and regulations, in particular wi

The new IEC 61439 series is expected to have a similar structure to IEC 60439 with several new additions*: IEC 60439 IEC 61439 Series IEC 61439-1 General rules IEC 61439-2 Power switchgear and controlgear assemblies IEC 61439-6 Busbar trunking systems IEC 61439-3 Distribution boards IEC 61439-4 Assem

EMC: EN 55015 IEC 61000-3-3 IEC 61547 IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-6 IEC 61000-4-8 IEC 61000-4-11 Transient protection: 6kV/3kA combination wave, as per IEEE C62.41, line-line and line-ground IEC 61000-4-5 IEC 61000-4-4 THD: IEC 55015 20% @ 100-2

IEC 60634-1 IEC 60050-826 IEC 60364-4-41 IEC 60364-4-42 IEC 60364-5-52 IEC/DIS 64(CO)9173 IEC 60204-32 IEC 60529-1989; IEC 60529 IEC 60529 Accident prevention regulation "Electrical systems and apparatus" Accident prevention regulation "Cranes" Safety instructions "Monorails"

Alternating Locations When a power failure occurs, transformers must be . Gas-insulated switchgear to IEC 62271-203 Plug-in bushings to IEC 60137 Surge Arrester IEC 60099-4 Bushing IEC 60137 Dummy Plug Connector IEC 60840 / IEC 62067 Transformer Test: IEC 60137 Dimensions: EN 50299 Gas-Insulated Switchgear Test: IEC 62271-203 Dimensions: IEC .

IEC 60068-2-5 Test Sa: Solar radiation. IEC 60068-2-6 Test Fc: Vibration (sinusoidal) IEC 60068-2-9 Test Sa: Guidance for solar. IEC 60068-2-10 Test J: Mould growth. IEC 60068-2-11 Test Ka: Salt mist. IEC 60068-2-14 Test N: Change of

IEC 61099 9.2 OECD 301 IEC 60156 IEC 60247 IEC 62697 IEC 60814 IEC 62021.3 IEC 61125C IEC 62621.3 ISO 3104 IEC 60247 1.0 275 300 -10 0.96 15 50 500 bright and clear readily biodeg radable 30 20 35 0 0.20 4.0 non-corrosive 2 00 0.06 not detectable 250 300 -10 0.96 15 0 clear, free from .

02 Basics of IEC 62446 Overview of sub standards . IEC 62446. IEC 60364 (all parts) IEC 60364-6 IEC 60364-7-712:2002 . IEC/TR 60755:2008 . IEC 61557 (all parts) IEC 61730-1 - Clause 4 - System documentation requirements - Clause 5 - Verification . 4.1 General . 4.2 System data . 4.3 Wiring diagram . 4.4 Datasheets . 4.5 Mechanical design .

IEC 61000-4-5: 2005 IEC 61000-4-5: 2005 IEC 61000-4-6: 2008 IEC 61000-4-6: 2008 IEC 61000-4-8: 2009 IEC 61000-4-8: 2009 IEC 61000-4-11: 2004 IEC 61000-4-11: 2004 IEC 61000-4-12: 2006 VCCI VCCI OpShield is now available with or withou

IEC 417, No.5007 Off (Supply) IEC 417, No.5008 Earth (ground) IEC 417, No.5017 Protective earth (ground) IEC 417, No.5019 Frame or chassis IEC 417, No.5020 Equipotentiality IEC 417, No.5021 Direct current IEC 417, No.5031 Alternating current IEC 417, No.5032 Both direct and alternating current IEC 417, No.5

IEC 60364‐6 IEC 61010 – laboratory u IEC 61557 – d.c. IEC 61724‐1 IEC 61724‐2 IEC 61724‐3 IEC 61730‐2 IEC 62446‐1 maintenanc inspection IEC 62548 – erms and power (P) neous prod wer is the r t power (S or two‐term er sinusoida pe – descr