Donaldson Delivers Full-Flow Lube Filters For Cummins ISX .

Donaldson DeliversFull-Flow Lube Filtersfor Cummins ISX EnginesCummins is a registered trademark of Cummins Inc.

BY MEASUREMENTS THAT MATTER– Donaldson Lube Filters OutperformEvery oil filter needs to effectively balance three characteristics: efficiency (contaminant removal),capacity (contamination holding ability) and restriction (resistance to oil flow). Donaldsonfull-flow lube filters process the entire regulated oil flow through our pleated elements, even in coldtemperatures – meaning your engine receives critical lubrication protection. Two-stage stacked discfilters allow only a portion of the flow to pass through the high-efficiency stage – which means morecontaminant can pass on to the engine.That’s precisely why Donaldson recommends full-flow lube filters that strike the right balance forCummins ISX and other heavy-duty engines. Donaldson filters deliver: Ultra-high efficiency on fine particulate and oil degradation (sludge), Higher contaminant holding capacity, and Minimum oil flow restriction.It all adds up to filters that provide critical engine component lubrication – and simplydeliver better engine protection.Design Comparison & Oil FlowDonaldsonFleetguard Full-Flow Filter DesignTwo-Stage Combo Filter DesignSynteq MediaTechnologySyntheticFilter Medialower pressure dropand higher contaminantholding capacityless media area to captureand hold contaminant withincreased restriction50% MoreStacked DiscBypass Mediathe engine receiveshigh-efficiency lubefiltrationunder pressure, morecontaminants can passon to the engineOil Flow AreaDonaldson full-flow constructionfilters the entire flow of oilFleetguard two-stage construction splits oil flowbetween pleated and stacked disc section

BUILT TO PERFORM– Donaldson Has the Right Filter for YouDonaldson offers three different lube filters for ISX engines that keep oil cleaner by capturing morecontaminants that can cause engine wear. Choose the filter that best fits your requirements.OEM EfficiencyHigh EfficiencySTANDARD SEALSHEAVY-DUTY SEALSP550949P559000DBL7900OEM EfficiencyHigh EfficiencyHigh Efficiency withHeavy-Duty, Long-Life SealsReliable contaminant captureand capacity (life). If you’veexperienced filter plugging due toexcessive sludge caused by sootor coolant contamination – this isthe filter for you.Increased levels ofcontamination capturecombined with good capacity.Offers a higher level of engineprotection than the OEMstandard option. Efficiency: 99% @ 30μm 35% lower oil flow restrictionthan LF9080 Efficiency: 99% @ 15μm 13% lower oil flow restrictionthan LF9080(ELF7900)If your primary concern is engineprotection – this premium filterwill deliver with durable seals andheavy-duty potting materials towithstand extreme conditions andhot oil temperatures. Efficiency: 99% @ 15μm 40% lower oil flow restrictionthan LF9031CROSSES TO:Cummins 2882674 / Fleetguard LF9080Tested per ISO 4548/12 and ISO 3968.Cummins 4906633 / Fleetguard LF9031

NO MATTER HOW YOU STACK IT– Donaldson Lube Filters OutperformThe proof is in the performance. Donaldson filters offer superior protection for your engines.Tested per the filtration industry test method ISO 4548/12, Donaldson filters deliver superiorcontaminant removal efficiency and contaminant holding capacity.4-44x40%START TO FINISHmore efficientand holds up toTHAN OEM FILTERSmore contaminantContaminant Removal Efficiency100ß88Donaldson filtersprotect engines*ß7844x Morent26x MoreoreBeta RatioBetter EngineAll three Donaldson optionsProtection4-44x More10provide better filtration efficiency.ß84x More32P5509491P559000LF9080DBL7900LF9031October 2013 Cold Start RestrictionContaminant Holding CapacityPressure Drop (kPa)50 100 150 200 250 300 350 400 450 500 550 600 650 700P559000DBL7900133Efficiency (percent)Capacity (grams of contaminant dUp to 40% MoreP55094970%94LF9031ß84x More40%LF908030%20%2Donaldson filters offer superiorcontaminantholding capacity.1060%50%ß88Donaldson filters44x Morecatch more dirt*Beta 91P559000DLF908010%0%* Efficiencies are compared by forming beta ratios.October 2013 Cold Start ReBeta ratio is representedby contaminant–individed by PSID)0102030405060708090100180160Loerw140Tested per ISO 4548/12. Flow Rate at 150 lpm.Pressure Drop (PSID)Termination at 100 psid / 689.5 kPa.Flow (LPM)Efficiency50time weighted average100 at 15µm150(c) .200LF9031Pressure Drop (kPa)250200015001000100%90%80%050 100 150 200 250 300 350 400 450 500P559000DBL7900P550949

SLUDGE OR DIRT, PERFORMANCE MATTERS– Donaldson Lube Filters OutperformRegardless of the type of contaminant, high oil flow restriction means less effective filtration performance.100ON AVERAGE13311110594lower oil flow restrictionTHAN OEM FILTERSP550949P559000Oil FlowRestrictionß88ExtraContaminantCapturedUp to 40% More44x MoreBeta RatioCapacity (grams of contaminant captured)33%13210ß84x MoreLF9080DBL79002LF9031P5509491p isDroerwtterrBette p is P5509492000102030405060Flow (GPM)Tested per ISO 3968 at 450cSt.Lower100%pressure0 50 100 150 200 250 300 350 400 4P559000DBL7900drop –90%better filtration80%P550performancePressure Drop (kPa)2507070% drop (lower resistance toLower pressureflow) meansthe engine is less likely to60%experience50%oil flow restriction that couldresult in unfiltered oil bypassing the filter.Efficiency (percent)sre160Pressure (PSID)200Pressure Drop (kPa)we 150rP180Lo (LPM)Flow100LF9080October 2013 Cold StarRestriction: Average Pressure Drop (PSID)50P55900040%30%20%10%0%0102030405060Pressure Drop (PSID)FILTERING THROUGH THE FACTSCer tified Indus tr y Tes t s Methods –and More than a Decade of On-Equipment Use – Deliver Proven Per formanceThere are a wide range of contaminants that can create damage and wear in today’s engines – dirt, soot and evensludge. Donaldson filters are specifically designed to keep oil cleaner by capturing these contaminants that cancause engine wear. At Donaldson, our approach starts with verified testing (our labs are ISO/TS Certified andour performance testing procedures meet ISO, SAE and NFPA testing standards) and have been proven timeand again with more than a decade of on-equipment use. Remember, ISO 4548/12 is the industry standardfiltration performance test for determining the contaminant holding capacity and contaminant removalefficiency. Our filters have traveled billions of miles. Our disciplined approach to performance verification hasallowed us to develop a full range of filter options for ISX engines – filters you can trust to perform.

– Donaldson Lube Filters OutperformCold start is perhaps the most extreme condition your engines will encounter. Oil typically drains tothe sump and the oil viscosity will be higher until the engine warms. This is when your engine needsclean lubrication the most. Fortunately, Donaldson filters really shine – even under the toughestconditions.100ß88ß78START TO FINISH44x MoreBeta RatioMore26x MoreBetter EngineProtection4-44x More10ß8efficientunder high restriction conditions4x MoreCOMPARED TO OEM ncy versus Flow RestrictionOctober 2013 Cold Start RestrictionPressure Drop (kPa)100%050 100 150 200 250 300 350 400 450 500 550 600 650 030%The competitor’s lube filters become less efficient asthe filter restriction increases. Under pressure, theirstacked disc media only allows a portion of the flow topass through the high-efficiency stage – which meansmore contaminant can pass on to the engine.20%10%0%0102030405060708090Donaldson filtersprotect under pressureDonaldson filters maintain their efficiency and actuallyperform better as the pressure differential increases.Our high-efficiency P559000 and DBL7900 filters arethe most efficient – providing critical engine protectionduring cold weather start-ups.70%Efficiency (percent)nantedMoreUNDER PRESSURE AND IN THE COLD100Pressure Drop (PSID)Tested per ISO 4548/12. Flow Rate - 150 lpm at 100 F / 38 C.Termination at 100 psid / 689.5 kPa.Efficiency time weighted average at 15 microns.Donaldson has manufactured millions of lube filters for ISX engines withbillions of miles traveled that have outperformed customer expectations.

MAKING MAINTENANCE EASIER– Donaldson Has You CoveredYou need effective filtration to keep your fleets in operation andyou want complete engine liquid coverage from one trusted supplier.The same filtration technology and expertise you’ve come to expect from Donaldson is built inevery liquid filter we design and manufacture. Donaldson’s line of fuel, lube and coolant filtersfor ISX engines is designed to meet the needs of the application while delivering cleaner fluidsto your engine components and making your overall vehicle maintenance easier.Donaldson Aftermarket Filter WarrantyYOU HAVE A CHOICEYou can always choose top-quality Donaldson filters designed specificallyfor your engines and equipment. As long as you change them accordingto the engine manufacturer’s recommendations, using Donaldsonfilters will not void your engine manufacturer’s warranty.See Brochure F110064 for complete warranty details on all Donaldson ibrary/000194.pdf

Donaldson Filtration Products for Cummins ISX EnginesCross ReferenceDonaldson Part 07485WF21263680434WF2127Primary Fuel FiltrationP552203 Efficiency: 95% @ 140μmSecondary Fuel FiltrationNEWP55568615.0L 2010 Engines and Newer Efficiency: 99% @ 5μmNEWP55577611.9L 2010 Engines and Newer Efficiency: 99% @ 5μmP552200Pre-2010 Engines Efficiency: 99 @ 8μmLube FiltrationP550949OEM Efficiency Efficiency: 99% @ 30μmP559000High Efficiency Efficiency: 99% @ 15μmDBL7900 (ELF7900)High Efficiency, Life-Life Seals Efficiency: 99% @ 15μmCoolant FiltrationP550866SCA 8 Units Efficiency: 99% @ 50μmP550867Non-chemical Efficiency: 99% @ 50μmDonaldson Australasia Pty LtdDonaldson New ZealandPO Box 153, Wyong NSW 2259PO Box 14-770, Panmure 1741 AucklandFreecall: 1800 345 837Ph: 64 9 579 2790Ph: 61 2 4350 2000Fax: 64 9 579 0322Fax: 61 2 4351 2036www.donaldsonfilters.com.auBrochure No. F113026 ENG (5/14) 2014 Donaldson Company, Inc. All rights reserved. Donaldson Company, Inc. reserves the right tochange or discontinue any model or specification at any time and without notice. Printed in the U.S.A.

Cummins 2882674 / Fleetguard LF9080 Cummins 4906633 / Fleetguard LF9031 CROSSES TO: Tested per ISO 4548/12 and ISO 3968. Donaldson filters offer superior contaminant holding capacity. Contaminant Holding Capacity NO MATTER HOW YOU STACK IT . Cro