COMPACT BLUMOTION

COMPACT BLUMOTIONCOMPACT BLUMOTIONFace frame concealed hinges with integrated BLUMOTIONwww.blum.com/compact

Innovative technology concentrated in a small spaceBLUMOTIONinsideSince the 1980s Blum’s COMPACT concealed hinge has proven itself as the high quality solution for face frame cabinetry. The newBLUMOTION soft closing mechanism is integrated in the hinge cup, and continues to provide the quality of motion you have come toexpect from Blum hardware. COMPACT BLUMOTION hinges are available for any overlay face frame application or door style.Overload safety featureDeactivation optionInterchangeable with COMPACT hingesThis feature protects the hinge fromThe BLUMOTION function can beCOMPACT BLUMOTION hinges aredamage if the door is slammed andeasily deactivated on one of the hinges,interchangeable with current COMPACTmaintains the BLUMOTION soft closingallowing small or light doors to close withhinges so no need to change existingfor the life of the hinge.the same high quality of motion.setups or workflows.2

COMPACT BLUMOTION programBLUMOTIONinsideA completeface frame program39C series38C seriesCOMPACT BLUMOTION 39C full overlay hinges with a 110 COMPACT BLUMOTION 38C full overlay hinges with a 107 opening angle and 1/2" cup depth.opening angle and 7/16" cup depth (ideal for profile doors).38N series38B seriesCOMPACT BLUMOTION 38N partial overlay hinges with aCOMPACT BLUMOTION 38B full overlay face mount hinges105 opening angle and 7/16" cup depth.with a 107 opening angle and 7/16" cup depth.3

BLUMOTIONinsideGeneral specificationsHinge attachmentScrew-onPress-inUse #6 wood screwsPre-attached Ø8 dowels installed with Blum knock-in tool orMINIPRESS with universal insertion ramMounting plate attachment39C/38C series ‒ wraparound38N series ‒ wraparoundHinge cup centerpoint38B series ‒ face mountMinimum revealHinge cup centerpoint andMINIPRESS/MINIDRILL setbackposition is 20.5 (13/16") forCOMPACT BLUMOTION hinges.A minimum reveal per door isrequired to keep the door frombinding and varies dependingon door thickness (see minimumreveal table for each hinge).4535Ødoor9.53 (1/8")20.5 (13/16")revealØ8Hinges per doorThis chart can serve as a guide for determining the number of hingesper door. Note that door weight can also determine the number ofhinges required.Hinges required per door2345Cabinet height100"NOTE: The distance between the top and bottom hinges must begreater than the width of the doorSubject to technical modifications without notice. 201180"60"20"415-30lb40" 15 lb30-45lb45-60lb

BLUMOTIONinsideAdjustmentDoor adjustmentThree-dimensional adjustmentSide adjustmentHeight adjustmentDepth adjustmentRotate the front cam screw to increase ordecrease door overlay ( /- 1/16").Loosen installation screws to adjust doorposition ( /- 1/8"), then retighten.Rotate the rear cam screw to adjust door gap( 3/32", - 1/32").BLUMOTION deactivationSwitch on the hinge cupFor small or light doors, the BLUMOTION can be deactivated on oneDoor must be closed once for the deactivation to be complete.of the hinges. COMPACT BLUMOTION comes in the activated position, To reactivate, move switch back to the original position “I”.marked with a “I”. The deactivated position is marked with a “0”.12Dimensions in millimeters (inch equivalents as noted)5

COMPACT BLUMOTION 39C hinges for full overlay110 Minimum revealFeatures BLUMOTION soft close integratedinto the hinge cup Deactivation switch for small/light doors Overload safety feature One-piece wraparound hinge 1/2" cup depth Press-in hinges must be inserted withknock-in tool or universal insertion ramsq. edgeminimum revealFeatures3/4" door 7/32"based on squareedge doorsBoring 4"1/2"Ø45353/8"1/8"pilot hole1/8"overlay9.5110 20.5gap3/16" factory setting,adjusts 3/32" -1/32"13Wraparound hingesAdjustmentDeactivation switchOverlayCam depthadjustmentHeightadjustmentCam 25AccessoriesType 17 truss head screw6834THAngle restriction clip38C315B3Hinge cup spacer38C355B9Cover capSubject to technical modifications without notice. 2011Screw-on38C3508

COMPACT BLUMOTION 38C hinges for full overlay107 Minimum revealFeatures BLUMOTION soft close integratedinto the hinge cup Deactivation switch for small/light doors Overload safety feature One-piece wraparound hinge 7/16" cup depth Press-in hinges must be inserted withknock-in tool or universal insertion ramsq. edgeminimum revealFeatures3/4" door 9/32"based on squareedge ng pattern3/4"7/16"Ø45353/8"pilot hole1/8"1/8"overlay9.5107 20.5gap3/16" factory setting,adjusts 3/32" -1/32"11AdjustmentWraparound hingesDeactivation switchCam depthadjustmentOverlay1-1/4"HeightadjustmentCam 201-5/16"38C358B.211-1/2"38C358B.24AccessoriesType 17 truss head screwAngle restriction clip38C315B3Hinge cup spacer38C355B9Cover capDimensions in millimeters (inch equivalents as noted)7834TH38C3508

COMPACT BLUMOTION 38N hinges for partial overlay105 Minimum revealFeatures BLUMOTION soft close integratedinto the hinge cup Deactivation switch for small/light doors Overload safety feature One-piece wraparound hinge 7/16" cup depth Press-in hinges must be inserted withknock-in tool or universal insertion ramsq. edgeminimum reveal3/4" door 9/32"based on squareedge doorsBoring 353/4"3/8"pilot hole1/8"1/8"overlay9.5105 20.5gap3/16" factory setting,adjusts 3/32" -1/32"11AdjustmentWraparound hingesDeactivation switchCam depthadjustmentOverlayHeightadjustmentCam sideadjustmentDoor ccessoriesType 17 truss head screwSubject to technical modifications without notice. 20118834THAngle restriction clip38C315B3Hinge cup spacer38C355B9Cover cap38N3508B

COMPACT BLUMOTION 38B hinges for face mountFeatures107 Minimum reveal BLUMOTION soft close integratedinto the hinge cup Deactivation switch for small/light doors Overload safety feature One-piece face mount hinge - 1-3/8"overlay or greater Excellent solution for large filler strips 7/16" cup depth Press-in hinges must be insertedwith knock-in tool or universalinsertion ramsq. edgeminimum revealFeatures3/4" door 9/32"based on squareedge doorsBoring patternDimensionsCabinet faceDoor311/16"Ø87/16"3/4"1-9/16"45Ø3511/32" min.pilot hole5/64"9.520.51/8"overlay11107 gap3/16" factory setting,adjusts 3/32" -1/32"AdjustmentFace mount hingesDeactivation switchCam sideadjustmentHeightadjustmentOverlay1-3/8" or soriesFlat head wood screwDimensions in millimeters (inch equivalents as noted)9606N or 606PAngle restriction clip38C315B3Hinge cup spacer38C355B9

DAccessoriesAngle restriction clipHinge cup spacerDistance spacerRestricts opening angle of the COMPACTBLUMOTION to 86 . Angle restriction clipmust be inserted before the hinge has beeninstalled.1/16” spacer for use under the hinge cup forthin or profile doors.This steel spacer decreases door overlayin 1/32" increments and can be stacked toachieve desired overlay reduction.Hinge cupDecrease overlayby adding spacersoverlaySpacer38C315B3Part no.Part no.Part no.Angle restriction clip38C355B9Hinge cup spacer36.3515Distance spacerHinge arm cover capType 17 truss head screwFlat head wood screwSteel, nickel-plated cap. Available blank orwith printed custom logo (minimum orderquantity applies).For attaching hinge to face frameFor attaching hinge to doorPart no.Part no.38N3508BPart no.834TH#8 x 3/4", #2 Phillips#6 x 5/8", #2 Phillips606N#6 x 5/8", #2 POZI606PA POZI screwdriver (different from Phillips)is the most crucial tool you can use to assure that fulltorque is applied to all Blum mounting screws. POZIscrews can be identified by the distinctive “tick” markslocated in the center of the screw head recess.PhillipsPOZI10Ø8 mm dowelsPOZI DRIVER and bits1238N cover cap38C350810.839C/38C cover cap8.6108.6Tick marksPart no.Subject to technical modifications without notice. 2011#2 POZI DRIVERPOZI DRIVER1/4" Magnetic bit holderBIT HOLDERPart no.Without flange#2 x 1" POZI bit insertPOZI BIT #2x1With flange#2 x 2" POZI bit insertPOZI BIT #2x2Installation screw1070.053234.3582.01608.1200

DAssembly aidsKnock-in toolUniversal insertion ramCan be used to insert all Blum press-in hingesCan be used for inserting all Blum COMPACT press-in hingesPart no.Part no.ZME.0710Knock-in toolUniversal insertion ram47MZM.0047ECODRILLQUICKFIXDowelling fixturePre-bores doors for Blum hingesLocates and matches positions of hingesand plates on cabinets and doorsA tool for attaching and removing dowelsfrom hingesPart no.M31.1000ECODRILLPart no.65.7500.02QUICKFIXPart no.Dowelling fixture69.3600Machine drill bitsPart no.Ø5 mmØ8 mmØ10 mmØ35 mmØ5 mm drill bit (RH)M01.ZB05.D2 RØ5 mm drill bit (LH)M01.ZB05.D3 LØ8 mm drill bit (LH)M01.ZB08.03 LØ10 mm drill bit (RH)M01.ZB10.02 RØ10 mm drill bit (LH)M01.ZB10.03 LØ20 mm drill bit (RH)M01.ZB20.02 RØ35 mm drill bit (RH)M01.ZB35.02 RTwist drill bits — high speed steelDrill bits without center pointFor use on thin or profiled doorsVPB-5Twist drill bit*Chuck for DB-2mmPart no.VPB-5 centering bitØ8 mmØ35 mmØ2 mm leftØ2.5 mm rightØ5 mm rightPart no.Ø8 mm drill bit without center point (LH)M01.ZB08.OS LØ35 mm drill bit without center point (RH)M01.ZB35.OS RDB-5mmDB-8mmØ10 mm rightDB-10mmØ10 mm chuck for DB-2mm*11DB-2.5mmØ8 mm right*Use to pilot bore for screw-on hingesDimensions in millimeters (inch equivalents as noted)VPB-5DB-2mmDB-10 x 2mm

Assembly aidsMachinesMINIPRESS P — Deluxe boring and insertion machine Front adjustable boring distancewith digital counter Pneumatic hold-down clamps Boring depth adjustment Ruler stops (qty 4) Tool kit included Dust collection attachment Optional laser center line set Accepts new 8 or 9 spindle headsPart no.Single phase — 220V powerM53.1053*USThree-phase — 220V powerM53.1004*USMINIPRESS M — 110V manual boring and insertion machine 110V power with molding plug (portable)V110Does not require pressurized airRuler stops (qty 4)Tool kit includedDust collection attachment Accepts new 8 or 9 spindle headsPart no.M52.1056*USSingle phase — 110V powerMINIDRILL P — Standard boring machine Front adjustable boring distanceRuler stops (qty 4)Tool kit includedDust collection attachment Optional laser center line, digitalcounter and hold down clamps sets Accepts new 8 or 9 spindle headsPart no.M53.1053*50Single phase — 220V powerOptional itemsPart no.Laser center line setMZR.5300.USSubject to technical modifications without notice. 2011Part no.MZE.2110Digital counter set12Part no.Hold down clamp setM53.0720.US