Apparel E1 H1 4 - Juki Singapore

1-needle, Lockstitch Machine1-needle, Lockstitch MachineDirect-drive, High-speed, Needle-feed, Lockstitch Machine1-needle, Lockstitch MachineDDL-5550N-7DDL-5550NDLN-9010AThe machine is a needle-feed type, categorized under theDDL-9000B series, that has been highly evaluated as thetop-of-the-line lockstitch machine with a thread trimmer.The thread take-up mechanism, feed mechanism, thread pathsand hook have been further improved to enhanceresponsiveness to material changes and to ensure consistentstitch quality.DLN-9010A-SSModel nameLight- to medium-weightApplicationModel nameApplicationMax. sewing speedMax. stitch lengthPresser footNeedleModel nameApplicationMax. sewing speedMax. stitch lengthPresser footNeedle5,000sti/min5,500sti/min4mm5mmPresser footNeedle4mmBy knee: 9mmHeavy-weightPresser footDDL-5550N-7Model nameApplicationWith its bottom and variable top-feed mechanism, the machinewidely adapts to diversified applications and helps promote theproduction of upgraded-quality products while increasing efficiency.4,000sti/minPresser footNeedleModel nameBy knee: 13mm5mmApplication8mmMax. sewing speedWhen using auto-lifter AK85: 9mmBy knee: 13mmDB 1 (#14), 134 (Nm90)DB 1 (#14), 134 (Nm75)Max. stitch lengthPresser footDLU-5494N-7/IT-100ADLU-5492N-7/IT-100F (with Automatic Thread Trimmer)NeedleModel name03DLU-5492N-7 / IT-100FPresser foot1.3 3.5mm8 mm (differs with the gauge)Lift of presser footManual: 5.5 mm / By air: 10.0 mmNeedleStitch length4,000sti/min* (normal operation: 2,500 sti/min)Max. top-feed amountDB m4.5mmBy knee: 13mmDB 1 (#14), 134 (Nm90)DLN-5410NJ-7DB 1 (#21), 134 (Nm130)DLN-5410NLJeansHeavy-weight(long stitch length type)4,000sti/min3,000sti/min4.5mm6mmBy knee: 13mmDB 1 (#21), 134 (Nm130)DB 1 (#21), 134 (Nm130)DLN-5410N-7The cylinder-bed lockstitch machine with a thread trimmer isdesigned for hemming the bottom of jeans, casual pants andwork uniforms.Max. sewing speedstitch lengthDLN-5410NH-7, 5410NHDLN-6390-7DLN-6390High-quality seams are produced by digital control function.(For topstitching shirt collars)With the digitally controlled material edge sensor and clothguide,the sewing machine is able to sew topstitches on collarswhile keeping the constant edge width.Cycle sewing oftopstitches on collars can be carried out in repetition only bysetting the edge width, collar angle, material-end finishingposition, etc. on the control panel.Model nameDLN-5410N-7, 5410NHigh-speed, Cylinder-bed, 1-needle, Needle-feed Lockstitch Machine with Large Hook1-needle, Bottom and Variable Top-feed, Lockstitch MachineMax. sewing speedDLN-9010ALight- to medium-weight Medium- to heavy-weightMax. stitch length4,500sti/min8mm (top feed amount variesMax. top-feed amount depending on the type of gauge)NeedleMax. sewing speedDLU-5490N-7, 5490NMax. stitch length 5mm (forward), 3mm (backward)DB 1 (#21) #20〜#23, 134 (Nm130) Nm120〜Nm160The machine produces seams with accurate stitch length andprevents slippage of the upper fabric. The machine ensuresbeautiful seam quality free from stitch gathering, even when ahard-to-feed material is used.DLU-5490N-7DLU-5490NPresser footNeedleDLN-5410N-7DLN-5410NWith its microcomputer control, the machine achieves high-qualityshirring with consistency. The machine enables eveninexperienced operators to perform shirring operation smoothlyand easily.Max. sewing speed4.5mmBy knee: 15mm (max.), Auto: 10mm1-needle, Needle-feed, Lockstitch MachineDLU-5494N-7/IT-100A (with program shirring control device)DLU-5494N-7/IT-100A4,000sti/minMax. stitch length1-needle, Bottom and Variable Top-feed, Lockstitch MachineModel nameHeavy-weightMax. sewing speedBy knee: 13mmDB 1 (#21), 134 (Nm130)DLN-9010A-SHApplication5mmDA 1 (#9), 134 (Nm65)DB 1 (#14) #9〜#18, 134 (Nm90) Nm65〜Nm110Model nameDDL-5550NA-7, 5550NA DDL-5550NH-7, 5550NH4,000sti/minBy knee: 15mm (max.), Auto: 10mmThe max. sewing speed should be set at 4,000sti/min or less when the machine isused with a stitch length of more than 3.5mm.DB 1 (#14), 134 (Nm90)Light-weight4.5mm*Max. stitch lengthBy knee: 13mmDB 1 (#14), 134 (Nm75)5,000sti/minMax. sewing speedDDL-5550N-7DDL-5550NMedium-weightBinder open / close typeCylinder-bed 05,000sti/minStandard gears: 3.2mm (2.8mm) /Supplied gears: 2.3mm, 3.6mm /Optional gears: 2.1mm, 2.5mm, 4.2mm(utilized by changing pitch conversion gears)Max. 14mmDriven by air cylinderManual type180mmUY180GVS Nm140 range of use:Nm90〜Nm150 (equivalent to #14〜#22.5)DLN-6390-704

1-needle, Lockstitch Machine2-needle, Lockstitch Machine1-needle, Lockstitch Machine with Vertical Edge TrimmerSemi-dry head, 2-needle, Lockstitch MachineDLM-5400N-7 (bottom-feed)DLM-5200NLH-3528A-7LH-3528ALH-3578A-7 (with large hooks)LH-3578A (with large hooks)The knife is sharp enough to cut any type of mamaterial. Theone-touch utility knife lever enhances the comfort ofoperation.Model nameDLM-5400N-7Max. sewing speed4,500sti/min4mmMax. stitch lengthBy knee: 10mmPresser footNeedleThis is the cutting-edge model 2-needle sewingmachine which comes with substantially enhancedmechanisms such as the direct-drive mechanism,semi-dry head, new thread tension controlmechanism and improved oiling system. All modelsof the LH-3500A Series are provided with asemi-dry head to eliminate staining with oil from theframe (the needle bar part).*A thread tension control mechanism has beendeveloped for each type of sewing machine inorder to achieve the best-suited thread tension forits purpose.*Two selectable new-method oiling mechanisms.DB 1 (#14) #9〜#18, 134 (Nm90)Max. thickness of thematerial to be cut4mmModel nameDLM-5200N4,500sti/minMax. sewing speed5mmMax. stitch lengthBy knee: 10mmPresser footDB 1 (#14), 134 (Nm90)NeedleDLM-5400N-71-needle, Needle-feed, Lockstitch Machine with Vertical Edge TrimmerLH-3528A-7DMN-5420N-7Model nameThe machine is a needle-feed type.The knife is sharp enough to cut any type of material.ApplicationLH-3528A-7Needle gaugePresser footNeedleLH-3578A-7LH-3578AG: Jeans and heavy-weight3,000sti/min3,000sti/minMax. sewing speedMax. stitch lengthLH-3528AA: Light-weight, F: Foundation, S: Medium-weight, G: Jeans and heavy-weight5mm (F type: 4mm)3.2 34.9mm (1/8" 1-3/8")5mm2.4 38.1mm (3/32" 1-1/2")3.2 25.4mm (1/8" 1")By hand: 7mm, By knee: 13mmA: DP 5 (#9) #9 #16F: DP 5 (#10) #9 #163.2 38.1mm (1/8" 1-1/2")By hand: 7mm, By knee: 13mmS: DP 5 (#14) #9 #16G: DP 5 (#21) #16 #23G: DP 5 (#21) #16 #23Semi-dry head, 2-needle, Lockstitch Machine with Organized Split Needle Bar5,000sti/min5mmMax. stitch lengthBy knee: 10mmPresser footNeedleLH-3568A-7LH-3568ALH-3588A-7 (with large hooks)LH-3588A (with large hooks)DMN-5420N-7Model nameMax. sewing speedDB 1 (#14) #9 #18, 134 (Nm90)Max. thickness of thematerial to be cut4mmDMN-5420N-71-needle, Differential-feed, Lockstitch MachineDLD-5430N-7DLD-5430NWith its highly reliable bottom-differential-feed mechanism,the machine promotes the production of upgraded-qualityproducts while increasing efficiency.The sewing machine with organized split needlebars is the only sewing machine in the industry thatcomes with the semi-dry head. It helps reducepoor-quality products due to oil stains even in thecase of product items which have corner stitchingsections.*The semi-dry head sewing machine with organizedsplit needle bars is only available from JUKI.*A thread tension control mechanism has beendeveloped for each type of sewing machine inorder to achieve the best-suited thread tension forits purpose.*Two selectable new-method oiling mechanisms.LH-3568A-7Model nameMax. sewing speed5mmMax. top-feed amountShirring 1:1.5 (max. 1:3*), Stretching 1:0.5Needle bar stroke30.7mmNeedle05Application4,500sti/minMax. stitch lengthPresser footModel nameDLD-5430N-7, 5430NThis ratio applies provided that the stitch length does not exceed 2.5mm.LH-3588A-7 (large hooks)LH-3588A (large hooks)G: Jeans and heavy-weight3,000sti/min3,000sti/minMax. stitch length5mm5mm3.2 25.4mm (1/8" 1")3.2 25.4mm (1/8" 1")By hand: 7mm, By knee: 13mmBy hand: 7mm, By knee: 13mmS: DP 5 (#14) #9 #16G: DP 5 (#21) #16 #23G: DP 5 (#21) #16 #23Presser footDLD-5430N-7LH-3568AS: Medium-weight, G: Jeans and heavy-weightMax. sewing speedNeedle gaugeBy knee: 13mmDB 1 (#14), 134 (Nm90)LH-3568A-7Needle06

Overlock / Safety Stitch MachineOverlock / Safety Stitch MachineHigh-speed, Overlock / Safety Stitch MachineDirect-drive, Overlock / Safety Stitch MachineMO-6800S SeriesMO-6700DA SeriesThe MO-6800S Series responds to various kinds of sewing materials andprocesses, producing delicate and beautiful soft-to-the-touch seams while furtherreducing operating noise as well as increasing durability. This advanced overlock /safety stitch machine is easier to use and promises superior cost-effectiveness.JUKI’s dry-head technology has been introduced to theMO-6700S, which has excellent seam quality and higherproductivity.Only the parts which mainly contribute to oil splashes areimproved to have dry mechanisms to create the semi-dry-headoverlock machine, MO6700DA series.MO-6816SModel nameStitch typeMO-6804SMO-6814SMO-6816S1-needle overlock2-needle overlockSafety stitching7,000sti/minMax. sewing speedMO-6714DAModel nameStitch typeMO-6704DAMO-6716DAMO-6714DA1-needle overlock2-needle overlock0.8 4mmStitch lengthOveredging width3-needle Safety stitchingSafety stitching7,000sti/minMax. sewing speedNeedle gaugeMO-6743DA1.5 4mm—2.0, 3.2mm3.2, 4.8, 4.8 2.0, 3.2 2.0mm3.2 2.0, 4.8 2.0mm2.0, 3.2, 4.0, 4.8mm3.2, 4.0, 4.8, 6.4mm3.2mmOveredging width2.0mm3.0, 5.0mm3.0, 4.0mm4.0, 5.0, 6.0mmFor gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6)Differential feed ratioDC 27 (excluding some subclass model)Super-high-speed, Overlock / Safety Stitch MachineMO-6900S SeriesFor gathering 1:2 (Max. 1:4), For stretching 1:0.7 (Max. 1:0.6)DC 27 (excluding some subclass model)Needle—1.5, 4.0mmNeedle gaugeNeedle1.6, 3.2, 4.0, 4.8mmBottom differential feed ratio0.6 3.8 (4.5) mmStitch lengthSince the machine comes with a needle-thread take-up mechanism as well as alooper thread take-up mechanism, to offer upgraded responsiveness from light- toheavy-weight materials with a lower applied tension, it achieves well-tensedsoftfeeling seams that flexibly correspond to the elasticity of the material at themaximum sewing speed of 8,000 to 8,500sti/min. To offer improved sewingcapabilities as well as to prevent stitching misshapes, the machine is equipped asstandard with the needle thread heat remover and needle cooler.Semi-dry-head, High-speed, Overlock / Safety Stitch MachineMO-6800D SeriesJUKI's dry technology has been adopted for the MO-6800Swhich produces seams of delicate quality and feel as well asachieves excellent cost-effectiveness. This is a semi-dry headoverlock machine with the dry mechanism which eliminatesoil-splashing problem. As a result, oil stains on the sewnproducts are eliminated.Model nameStitch typeMax. sewing speedMO-6904SMO-6914SMO-6916S1-needle overlock2-needle overlockSafety stitching8,500sti/minNeedle gaugeOveredging widthDifferential feed ratio8,000sti/min1.5 4mm0.8 4mmStitch length—2.0, 2.4, 3.2mm2.0, 3.2, 4.0, 4.8, 4.8 2.0mm1.6, 3.2, 4.0, 4.8mm3.2, 4.0, 4.8mm3.2, 4.0, 4.8, 6.4mmGathering 1:2 (max. 1:4), Stretching 1:0.7 (max. 1:0.6)DC 27 (excluding some subclass model)NeedleMO-6914SHigh-speed, Variable Top-feed, Overlock / Safety Stitch MachineMO-6900R SeriesMO-6816DModel nameStitch typeMO-6804DMO-6814DMO-6816DMO-6843D1-needle overlock2-needle overlockSafety stitching3-needle safety stitching7,000sti/minMax. sewing speedNeedle gaugeOveredging widthDifferential feed ratio07NeedleModel nameStitch typeMO-6904RMO-6914RMO-6916R1-needle overlock2-needle overlockSafety stitching7,000sti/min, 6,000sti/minMax. sewing speed0.6 3.8 (4.5) mmStitch lengthThe locus of the top feed dog increases the surfaces of the top feed dog thathorizontally synchronize with the bottom feed dog, to reliably feed the materialswithout damaging them. The feed mechanism smoothly feeds light-weightmaterials softly or feeds heavy-weight materials with an increased cloth-bitingforce. The fulcrum of the top feed locus can be set at the bestsuited positionaccording to the material or process.0.8 4mmStitch length—2.0mm3.0, 5.0mm5.0 2.0mm4.0mm2.0, 3.0, 4.0mm4.0, 5.0mm3.0mmGathering 1:2 , Stretching 1:0.7DC 27 (excluding some subclass model)Needle gaugeOveredging widthDifferential feed ratioNeedle1.5 4mm—2.0mm3.2, 4.8, 4.8 2.0mm3.2, 4.0, 4.8, 6.4mm3.2, 4.0mm3.2, 4.0, 4.8, 6.4mmGathering 1:2 (max. 1:4), Stretching 1:0.7 (max. 1:0.6)DC 27 (excluding some subclass model)MO-6914R08

Zigzag Stitching MachineOverlock / Safety Stitch MachineComputer-controlled, Direct-drive, High-speed, 1-needle, Lockstitch, Zigzag Stitching MachineOverlock / Safety Stitch Machine for Extra Heavy-weight MaterialsLZ-2290A-SR-7 (quick reverse type)LZ-2290A-DU-7 (dry-head, anti-material-slip capability type)LZ-2290A-DU (dry-head, anti-material-slip capability type)LZ-2290A-DS-7 (dry-head type)LZ-2290A-DS (dry-head type)LZ-2290A-SU-7 (minute-quantity lubrication, anti-material-slip capability type)LZ-2290A-SU (minute-quantity lubrication, anti-material-slip capability type)LZ-2290A-SS-7 (minute-quantity lubrication type)LZ-2290A-SS (minute-quantity lubrication type)MO-6900J Series (variable top-feed)MO-6900G Series (bottom-feed)The machine incorporates a mechanism and parts that are optimum for the sewingof extra heavy-weight materials, such as an extra high-lift type upper looper, tractorfoot and coarse type feed dog. It demonstrates an excellent performance ability inthe sewing of various kinds of heavy-weight materials such as jeans, raised fabricmaterials, mats and carpets.MO-6916JModel nameStitch typeMO-6904JMO-6914JMO-6916J1-needle overlock2-needle overlockSafety stitchingMO-6904G1-needle overlockMO-6914GMO-6916G2-needle overlockSafety stiching2.5 5mm6,000sti/minMax. sewing speedStitch length2.5 5mm2.5 4mm2.5 5mm2.5 5mm2.5 4mmNeedle gauge—2.6mm4.8mm—2.6mm4.8mm4.8mm6.4mm4.8, 6.4mm4.8, 10.0, 18.0mm6.4mm4.8, 6.4mmOveredging widthDifferential feed ratioGathering 1:1.75 (max. 1:3.8) Gathering 1:2 (max. 1:3.8) Gathering 1:1.75 (max. 1:3.8) Gathering 1:1.75 (max. 1:3.8) Gathering 1:2 (max. 1:3.8) Gathering 1:1.75 (max. 1:3.8)Stretching 1:0.7 (max. 1:0.6) Stretching 1:0.8 (max. 1:0.6) Stretching 1:0.7 (max. 1:0.6) Streching 1:0.7 (max. 1:0.6) Streching 1:0.8 (max. 1:0.6) Streching 1:0.7 (max. 1:0.6)DO 5 (excluding some subclass model)NeedleThe machine comes provided as standard with twenty differentzigzag stitching, T-stitch and covering stitch patterns grouped intofourteen different types. The feed mechanism is controlled with astepping motor, enabling continuous sewing at a high speed.A single unit is extremely versatile and can perform straight stitching,standard zigzag stitching, 2-step zigzag stitching, 3-step zigzagstitching, scallop stitching, and blind stitching. As a result, thesystem is available for a far wider range of applications.(Dry-head type)With its dry head, the machine does not splash oil, therebypreventing the sewn product from being stained with oil. The dryhead also does not require periodic oiling.Super-high-speed, Cylinder-bed, Overlock MachineMO-6900C SeriesLZ-2290A-SR-7The machine provided with a small-in-diameter cylinder bed, is capable ofrunstitching or blind-hemming tubular materials, such as sleeve cuffs, with ease.Model nameStitch typeMO-6904CMO-6914C1-needle overlock2-needle overlock8,000sti/minMax. sewing speedStitch lengthNeedle gaugeOveredging widthBottom differential feed ratioNeedle0.8 3.5mm—2.0mm3.2, 4.0, 4.8mm3.2, 4.0mmModel nameGathering 1:2.3 (max. 1:4.5), Streching 1:0.8DC 27MO-6914CMax. sewing speed092.0mmOveredging width3.2mmNeedleTypeInternal memory: Max. 20 patterns,External memory: Max. 999 patterns438 (Nm70), DP 5 (#10)LZ-2290A-DU-7LZ-2290A-DUMax. stitch length(stepless fine adjustment)Number of patterns forstandard stitchingCustom patternmemory capacityContinuous 0A-SUStandardAnti-material-slipcapability typeStandard4,500sti/min5,000sti/minDry-head typeAnti-material-slipcapability typeLZ-2290A-SS-7LZ-2290A-SSMinute-quantity lubrication type4,000sti/min10mm (in increments of 0.1mm)Max. zigzag widthFor gathering 1:2.3 , For stretching 1:0.8DC 2714 types / 20 patternsMax. sewing speed2-needle overlockNeedle gaugeBottom differential feed ratioMachine head type7,000sti/min (longitudinal stroke of top feed dog is 6mm or less)6,000sti/min (longitudinal stroke of top feed dog is 6 8.5mm)0.8 3.5mm5mmModel nameMO-6914C-BD6-307/X81028Stitch length10mmMax. stitch lengthNeedleThe machine comes with the top feed dog that moves along an ideal locus. Thefeed dog securely catches the material and allows the multi-layer portion of amaterial to be fed under it with consistency. In addition it helps finish uniformseams while preventing the presser foot from jumping and smoothly feeds thematerial without fail.Compact-shape of the cylinder effectively prevents the material from being fedunevenly and from twisting in various kinds of sewing of tubular materials eg.,joining sleeve cuffs of which diameter is small and blind hemming long materials.Stitch typeMax. zigzag widthCustom patternmemory capacityMO-6914C-BD6-307/X81028 (variable top-feed type)Model name5,000sti/min, T-shape stitching: 4000sti/minNumber of patterns forstandard stitchingHigh-speed, Cylinder-bed, 2-needle Overlock MachineLZ-2290A-SR-7Max. sewing speed2.5mm5mm2.5mm5mm8 types / 14 patternsInternal memory: Max. 20 patterns, External memory: Max. 999 patternsMax. 10 patterns, 20 step, 500 stitches/step438 (Nm70), DP 5 (#10)10

Zigzag Stitching MachineZigzag Stitching MachineHigh-speed, 1-needle, Lockstitch, Standard Zigzag Stitching Machine with Lower KnifeHigh-speed, 1-needle, Lockstitch, Zigzag Stitching Machine (standard zigzag / standard wider zigzag)LZ-2280ALZ-2282N-7LZ-2282NThe standard zigzag stitching

DDL-8700-7 DDL-8700 1-needle, Lockstitch Machine By thoroughly investigating and modifying the sewing mechanisms in order to achieve low-tension sewing, the machine flexibly responds to various kinds of materials and produces beautiful seams of consistent quality. Model name Application Max