Ly T67f
www.osram-os.comLY T67FDATASHEETLY T67FDatasheet Not for new designNot for new designPublished by ams-OSRAM AGTobelbader Strasse 30, 8141 Premstaetten, AustriaPhone 43 3136 500-0ams-osram.com Allreserved Version1.4 2022-05-131 rights
LY T67FDATASHEETTOPLED LY T67FFirst SMT LED with integrated reflector. With our great experience on SMT LED we are able to offer a high quality product forall kind of applications.Applications- Cluster, Button Backlighting- Traffic Lights- Electronic Equipment- White Goods- Interior Illumination (e.g. Ambient Map)Features - Package: white PLCC-2 package, colorless clear resin- Chip technology: Thinfilm- Typ. Radiation: 120 (Lambertian emitter)- Color: λdom 590 nm ( yellow)- Corrosion Robustness Class: 3B- Qualifications: AEC-Q102 QualifiedNot for new design- ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM)2 Version 1.4 2022-05-13
LY T67FDATASHEETOrdering InformationTypeLY T67F-U1AA-36-1Not for new design 3 Version 1.4 2022-05-13Luminous Intensity 1)IF 20 mAIvOrdering Code450 . 1400 mcdQ65110A9231
LY T67FDATASHEETMaximum RatingsParameterSymbolOperating TemperatureTopmin.max.-40 C100 CStorage TemperatureTstgmin.max.-40 C100 CJunction TemperatureTjmax.125 CForward currentTS 25 CIFmax.50 mASurge Currentt 10 µs; D 0.005 ; TS 25 CIFSmax.100 mAReverse voltage 2)TS 25 CVRmax.12 VESD withstand voltageacc. to ANSI/ESDA/JEDEC JS-001 (HBM)VESDNot for new design 4 Version 1.4 2022-05-13Values2 kV
LY T67FDATASHEETCharacteristicsIF 20 mA; TS 25 CParameterSymbolPeak Wavelengthλpeaktyp.597 nmDominant Wavelength 3)IF 20 mAλdommin.typ.max.583 nm590 nm595 nmSpectral Bandwidth at 50% Irel,max λtyp.18 nmViewing angle at 50% IV2φtyp.120 Forward Voltage 4)IF 20 mAVFmin.typ.max.1.90 V2.20 V2.50 VReverse current 2)VR 12 VIRtyp.max.10 µA0.01 µATemperature Coefficient of Peak Wavelength-10 C T 100 CTCλpeaktyp.0.12 nm / KTemperature Coefficient of Dominant Wavelength-10 C T 100 CTCλdomtyp.0.1 nm / KTemperature Coefficient of Forward Voltage-10 C T 100 CTCVFtyp.-2.5 mV / KReal thermal resistance junction/ambient 5)6)RthJA realmax.500 K / WReal thermal resistance junction/solderpoint 5)RthJS realmax.280 K / WNot for new design 5 Version 1.4 2022-05-13Values
LY T67FDATASHEETBrightness GroupsGroupLuminous Intensity 1)IF 20 mAmin.IvLuminous Intensity. 1)IF 20 mAmax.IvLuminous Flux 7)IF 20 mAtyp.ΦVU1450 mcd560 mcd1500 mlmU2560 mcd710 mcd1900 mlmV1710 mcd900 mcd2400 mlmV2900 mcd1120 mcd3000 mlmAA1120 mcd1400 mcd3800 mlmForward Voltage GroupsGroupForward Voltage 4)IF 20 mAmin.VFForward Voltage 4)IF 20 mAmax.VF3A1.90 V2.05 V3B2.05 V2.20 V4A2.20 V2.35 V4B2.35 V2.50 VWavelength GroupsGroupDominant Wavelength 3)IF 20 mAmin.λdom Dominant Wavelength 3)IF 20 mAmax.λdom583 nm586 nm4586 nm589 nm5589 nm592 nm6592 nm595 nmNot for new design36 Version 1.4 2022-05-13
LY T67FDATASHEETGroup Name on LabelExample: AA-3-3ABrightnessWavelengthAA3Not for new design 7 Version 1.4 2022-05-13Forward Voltage3A
LY T67FDATASHEETRelative Spectral Emission7)Irel f (λ); IF 20 mA; TS 25 COHL02654100Ι 0500550600650nm700λRadiation Characteristics7)Irel f (ϕ); TS 25 C40 30 20 10 0 ϕ 50 OHL016601.00.80.660 0.470 0.280 0Not for new design90 100 1.00.88 Version 1.4 2022-05-130.60.40 20 40 60 80 100 120
LY T67FDATASHEETForward currentRelative Luminous Intensity7), 8)IF f(VF); TS 25 CIFIv/Iv(20 mA) f(IF); TS 25 COHL0395410 2mAOHL0300810 1IVIV (20 mA)5redsuper-redorangeamberyellow107), 8)10 051510 -1510 01.51.71.92.12.3 V 2.5VFNot for new design 9 Version 1.4 2022-05-1310 -2 010510 1mA 10 2IF
LY T67FDATASHEETForward VoltageRelative Luminous Intensity7)ΔVF VF - VF(25 C) f(Tj); IF 20 mAOHL026670.25V7)Iv/Iv(25 C) f(Tj); IF 20 mAOHL026662.5IVIV (25 C) VF2.00.15yellow0.11.50.0501.0-0.05-0.1super redamberredorange0.5-0.15-0.2-60 -40 -20 020 40 60 C 100TjNot for new design 10 Version 1.4 2022-05-130-60 -40 -20 020 40 60 C 100Tj
LY T67FDATASHEETMax. Permissible Forward CurrentIF f(T)IFOHL0304460mA50TATS403020100TA temp. ambientTS temp. solder point020604080 C 100TPermissible Pulse Handling CapabilityPermissible Pulse Handling CapabilityIF f(tp); D: Duty cycle; TS 25 CIF f(tp); D: Duty cycle; TS 85 COHL030450.12AD IF 0.100.080.060.0050.010.020.050.10.20.510.04Not for new design0.02OHL030450.12AD IF0.0050.010.020.050.10.20.510.100.080.060.04tPD T0.02tPIFD TT0 -510 10-4 10-3 10-2 10-1 100 101 s 102tp11 Version 1.4 2022-05-13tPtPIFT0 -510 10-4 10-3 10-2 10-1 100 101 s 102tp
LY T67FDATASHEETDimensional Drawing9)Further Information:Approximate Weight:34.0 mgCorrosion test:Class: 3BTest condition: 40 C / 90 % RH / 15 ppm H2S / 14 days (stricter than IEC60068-2-43)Not for new design 12 Version 1.4 2022-05-13
LY T67FDATASHEETElectrical Internal CircuitRecommended Solder Pad9)4.5 (0.177)2.6 (0.102)1.5 (0.059) 4.5 (0.177)1.5 (0.059)2.6 (0.102)Not for new designPadgeometrie fürverbesserte WärmeableitungPaddesign forimproved heat dissipationLötstopplackSolder resistCu-Fläche 16 mm 2Cu-area 16 mm 2OHLPY97013 Version 1.4 2022-05-13
LY T67FDATASHEETRecommended Solder Pad9)Fläche darf bei Verwendung von TOPLED elektrisch nicht beschaltet werden.For TOPLED assembly do not usethis area for electrical contactPadgeometrie fürverbesserte WärmeableitungPaddesign forimproved heat dissipation3.3 (0.130)3.3 (0.130)Anode2.3 (0.091)11.1 (0.437)1.5 (0.059)1.1 (0.043)3.7 (0.146)0.8 (0.031)0.7 (0.028)Kathode/CathodeFläche darf bei Verwendung von TOPLED elektrisch nicht beschaltet werden.Cu Fläche / 16 mm 2 per padCu-areaFor TOPLED assembly do not usethis area for electrical contactLötstoplackSolder resistOHLPY440For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package notsuitable for ultra sonic cleaning.Not for new design 14 Version 1.4 2022-05-13
LY T67FDATASHEETReflow Soldering ProfileProduct complies to MSL Level 2 acc. to JEDEC J-STD-020EOHA04525300 CT 250Tp 245 C240 CtP217 C200tL150tS1005025 C0050100150200250s 300tProfile FeatureSymbolPb-Free (SnAgCu) AssemblyMinimumRecommendation MaximumRamp-up rate to preheat*)25 C to 150 CtSTime tSTSmin to TSmaxRamp-up rate to peak*)TSmax to TPLiquidus temperature 310012023K/ssK/sTL217Time above liquidus temperaturetL80100sPeak temperatureTP245260 CTime within 5 C of the specified peaktemperature TP - 5 KtP203036Ramp-down rate*TP to 100 CNot for new design602Unit10Time25 C to TPAll temperatures refer to the center of the package, measured on the top of the component* slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range15 Version 1.4 2022-05-13 C480sK/ss
LY T67FDATASHEETTaping9)Not for new design 16 Version 1.4 2022-05-13
LY T67FDATASHEETTape and Reel10)Reel DimensionsAWNminW1W2 maxPieces per PU180 mm8 0.3 / - 0.1 mm60 mm8.4 2 mm14.4 mm2000330 mm8 0.3 / - 0.1 mm60 mm8.4 2 mm14.4 mm8000Not for new design 17 Version 1.4 2022-05-13
LY T67FDATASHEETBarcode-Product-Label (BPL)Dry Packing Process and Materials9)Moisture-sensitive label or printLEEVle besela).k,HdeLIfanbl r coba(Ridmity.HRhu0%ee/6tiv Cla ared agckrefr30 in pa%kofto90rseasd).rsouorte (ponrsHde,ouitiHan bjec ngou rsco C72sindH ou5te48 C su eseHco 24 6daey40 be octim Ceor ithtimill pr).orctwOw nt23tim eatloorfaM TOFsaltimat le C atloatore.PthFlticth valo orurOF los uionbeif: readenwedl 4 5Fmlace eqidlog, noclvevi5aisinorbe24deprve l6Lede ,nt wheetecog:, weLe ve lkerousedaba ed floureLe vem %baebaalstur eLeren reedere 10oisteefotimursealopfoMseoi st urask,isor .33seisM oi stbedk,lo Han,g ph-0M oiinan in F R ng arrblDMebaTrpo If bl ith%lifki r C.(ifSisp.wea r kslfJ10 ba to etth vaY eamrsmr w, heed1eeteYd, ECiredicatSfteatnt 1W HouDA flodyqu In no ire1.deou4 8rereity isqu/JEre2.boeMtimto es id 2bre C16:ea)Stimis IPiced loortim eb) ev HumororeenFtimloorD2a kingncteFopa)lo or3.b) ba reF lodaefel 1 2FIfalretim vel4.sedl 2aveLe3anve lageLeeBveureLeatstureLeDoistur eMoist urMoi stM oiMNE RSsin IV OIT TS CntaN UTIOU coSENDAis bUagRMEICOT ECThISSdBarcode label MRAOS Humidity indicatorBarcode labelPlease check the HIC immidiately afterbag opening.Discard if circles overrun.Avoid metal contact.Do not eat.Comparatorcheck dotWETIf wet,examine units, if necessarybake units15%If wet,examine units, if necessarybake units10%5%If wet,parts still adequately dry.change desiccantNot for new designHumidity sensitive product is packed in a dry bag containing desiccant and a humidity card according JEDEC-STD-033.18 Version 1.4 2022-05-13
LY T67FDATASHEETType Designation SystemWavelength(λdom typ.)A:617 nmS:633 nmT:528 nmY:587 nmO:606 nmG:570 nmP:560 nmR:625 nmB:470 nmH:645 nmV:505 nmL:Emission Colorambersuper redtrue greenyelloworangegreenpure greenredbluehyper-redverde greenColor coordinates accordingCIE 1931/Emission color:W:whiteUW: ultra whiteC B:color on demand blueCG:color on demand greenCL:color on demand lagunePackage TypeT:TOPLEDLightemittingdiodeLAT6 Lead / Package Properties6:folded leads7:reverse gullwing leadsT:folded leads, improved corrosion stabilityAu-LF), w/o TiO2 jettingV:folded leads and UX:3 w/ improvedcorrosion stability (Au-LF), TiO2 jetting Not for new designEncapsulant Type / Lens Properties7:Colorless clear or white volume conversion(resin encapsulation)S:Silicone (with or without diffuser)Chip Technology:1: TSN3: standard InGaN4: AlGaAs5: HOP 20006: Standard InGalP9: TSN low currentB: HOP 2000C: ATOND: Small ThinGaN/ Thinfilm (e.g. 6mil)F: Thinfilm InGaAlPG: ThinGaN(Thinfilm InGaN)K: InGaAlP low currentS: standard InGaN low current0: TSN19 Version 1.4 2022-05-1376
LY T67FDATASHEETNotesThe evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety oflamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in thisdata sheet fall into the class exempt group (exposure time 10000 s). Under real circumstances (for exposure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to theeye exists from these devices. As a matter of principle, however, it should be mentioned that intense lightsources have a high secondary exposure potential due to their blinding effect. When looking at bright lightsources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation.Subcomponents of this device contain, in addition to other substances, metal filled materials including silver.Metal filled materials can be affected by environments that contain traces of aggressive substances. Therefore, we recommend that customers minimize device exposure to aggressive substances during storage,production, and use. Devices that showed visible discoloration when tested using the described tests abovedid show no performance deviations within failure limits during the stated test duration. Respective failurelimits are described in the IEC60810.For further application related information please visit www.osram-os.com/appnotesNot for new design 20 Version 1.4 2022-05-13
LY T67FDATASHEETDisclaimerAttention please!The information describes the type of component and shall not be considered as assured characteristics.Terms of delivery and rights to change design reserved. Due to technical requirements components maycontain dangerous substances.For information on the types in question please contact our Sales Organization.If printed or downloaded, please find the latest version on our website.PackingPlease use the recycling operators known to you. We can also help you – get in touch with your nearestsales office. By agreement we will take packing material back, if it is sorted. You must bear the costs oftransport. For packing material that is returned to us unsorted or which we are not obliged to accept, weshall have to invoice you for any costs incurred.Product and functional safety devices/applications or medical devices/applicationsOur components are not developed, constructed or tested for the application as safety relevant componentor for the application in medical devices.Our products are not qualified at module and system level for such application.In case buyer – or customer supplied by buyer – considers using our components in product safety devices/applications or medical devices/applications, buyer and/or customer has to inform our local sales partnerimmediately and we and buyer and /or customer will analyze and coordinate the customer-specific requestbetween us and buyer and/or customer.Not for new design 21 Version 1.4 2022-05-13
LY T67FDATASHEETGlossary1)Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internalreproducibility of 8 % and an expanded uncertainty of 11 % (acc. to GUM with a coverage factor ofk 3).2)Reverse Operation: This product is intended to be operated applying a forward current within thespecified range. Applying any continuous reverse bias or forward bias below the voltage range of lightemission shall be avoided because it may cause migration which can change the electro-optical characteristics or damage the LED.3)Wavelength: The wavelength is measured at a current pulse of typically 25 ms, with an internal reproducibility of 0.5 nm and an expanded uncertainty of 1 nm (acc. to GUM with a coverage factor of k 3).4)Forward Voltage: The forward voltage is measured during a current pulse of typically 8 ms, with aninternal reproducibility of 0.05 V and an expanded uncertainty of 0.1 V (acc. to GUM with a coveragefactor of k 3).5)Thermal Resistance: Rth max is based on statistic values (6σ).6)Thermal Resistance: RthJA results from mounting on PC board FR 4 (pad size 16 mm² per pad)7)Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devices, the typical data or calculated correlations of technical parameters can only reflect statistical figures.These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.because of technical improvements, these typ. data will be changed without any further notice.8)Characteristic curve: In the range where the line of the graph is broken, you must expect higher differences between single devices within one packing unit.9)Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with 0.1 anddimensions are specified in mm.10)Tape and Reel: All dimensions and tolerances are specified acc. IEC 60286-3 and specified in mm.Not for new design 22 Version 1.4 2022-05-13
LY T67FDATASHEETRevision HistoryVersionDateChange1.22021-07-19Dimensional Drawing1.42022-05-13Not for new designNew LayoutNot for new design 23 Version 1.4 2022-05-13
LY T67FDATASHEET Not for new designNot for new designPublished by ams-OSRAM AGTobelbader Strasse 30, 8141 Premstaetten, AustriaPhone 43 3136 500-0ams-osram.com All rights reserved24 Version 1.4 2022-05-13
Not for new design Characteristics I F 20 mA; T S 25 C Parameter Symbol Values Peak Wavelength λ peak typ. 597 nm Dominant Wavelength 3) I F 20 mA λ dom min. typ. max. 583 nm 590 nm 595 nm Spectral Bandwidth at 50% I rel,max λ typ. 18 nm Viewing angle at 50% I V 2φ typ. 120 Forward Voltage 4) I F 20 mA V F min. typ. max. 1 .
2.1 ASTM Standards:2 C165 Test Method for Measuring Compressive Properties of Thermal Insulations C167 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations C168 Terminology Relating to Thermal Insulation C177 Test Method for Steady-State Heat Flux Measure-ments and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus C303 Test Method for .
AUTOMOTIVEEMC SAFETY&EMC2011 Table3ISO11452-2severitylevels SeverityLevel Field/(V/m) I25 II50 III75 IV100 V(opentotheusersofthestandard) Figure10Typicalbiconicalantenna
4 Chaminade Pierrette (Air de Ballet), Op. 41 Piano Music by Female Composers (4th revised edition 2011) (Schott) 5 Chen Peixun Thunder in Drought Season 100 Years of Chinese Piano Music: Vol. III Works in Traditional Style, Book II Instrumental Music (Shanghai Conservatory of Music Press) A B C. 36 Piano 2021 & 2022 Grade 8 Practical Grades (updated September 2020) COMPOSER PIECE / WORK .
REVIEW OF ANALYTIC GEOMETRY The points in a plane can be identified with ordered pairs of real numbers. We start by drawing two perpendicular coordinate lines that intersect at the origin on each line. Usually one line is horizontal with positive direction to the right and is called the -axis; the other line is vertical with positive direction upward and is called the -axis. Any point in the .
ETHNOPOETIC STUDY (WITH TRANSLATION OF PRIMARY TEXTS) submitted to Pondicherry University in partial fulfillment of the requirements for the award of the degree of DOCTOR OF PHILOSOPHY, is a record of original research work done by Mr. JEROME K. JOSE during the period of his study (2008– 2011) at the Department of English, Pondicherry University under my supervision and guidance and that the .
range of classic (Oxford) and modern (Seattle) door styles. LETTERBOX Letterboxes are fitted centrally on solid and glazed door styles as standard (except Lisbon – no letterbox option). On cottage styles, the letterbox can be fitted centrally or at the bottom depending on style. DOOR STYLES Arcadia Composite Doors are available as single or double rebate doors. There is a choice of over 16 .
6 THE FACTORIES ACT, 1948 ACT NO. 63 OF 19481 [23rd September, 1948.] An Act to consolidate and amend the law regulating labour in factories. WHEREAS it is expedient to consolidate and amend the law regulating labour in factories; It is hereby enacted as follows:— CHAPTER I
1.7 Simple Suggestions to Improve Governance, Risk Management, and Compliance (GRC) 30 1.8 Why Read This Book: The Case for Good GRC 35 1.9 Organization of the Handbook 36 PART 1 Corporate Governance CHAPTER 2 A RISK-BASED APPROACH TO ASSESS INTERNAL CONTROL OVER FINANCIAL REPORTING (ICFR) 2.1 A Risk-Based Approach to Assessing ICFR
