2019 - Reid
product guide precast solutions australia edition 2019
precast solutions product guide 2019
content Lifting Systems 5 Precast Connections 26 Erection and Installation Lifting Systems Ramset FaceLifters Reid SwifLift FaceLifters 10 10 11 General Lifting SwiftLift Combination Anchors SwiftLift Eye Anchors SwiftLift Foot Anchors SwiftLift Void Formers SwiftLift Lifting Clutch 12 12 12 13 14 15 Metric Threaded Systems Elephant Foot Ferrule Reid Stiletto Round Bar Ferrule Double Ended Round Bar Solid Ferrule Reid Stiletto Ferrule Chair Round Bar Ferrule Chair Ferrule Nailing Plate Glue On Nailing Plate Ferrule Antenna Cap Reid SwiftCap 27 27 28 28 29 29 30 30 30 30 OrbiPlate 51 Reid BraceSet Bracing Anchor 52 Reid Footed Bracing Ferrule and Coil Bolt 53 RapidBrace 54 Reid Shims 55 Reinforcing Systems 16 ReidBar Systems ReidBar Reo ReidBar Starters ReidBar Coupler ReidBar to Metric Couplers ReidBar Inserts ReidBar Nut ReidBar Wing Nut ReidBar Grout Sleeve 17 17 17 18 18 19 19 20 20 ReidBar Accessories ReidBar Nail Plates ReidBar Stick On Support ReidBar Threaded Insert Chair Circular Spacer 21 21 21 22 22 Reinforcing Support Chairs 23 Mesh Chair 23 Panel Chair 23 Top Deck Chair 23 Bar Chair 24 Bar Deck Rail 24 16 4 Chemicals Precast 31 Release Agents Nox-Crete Bio-Nox Nox-Crete Release Agent #10 32 32 34 Maintenance and Installation Nox-Crete Blast-Off Nox-Crete Formguard Tj Plus Nox-Crete Kem-Ex-It Plus 36 36 37 38 Application Spray Systems Nox-Crete Excel Precision Form Sprayer Nox-Crete Perfect Concrete & Form Sprayer Nox-Crete Hand pump Foamer 40 40 41 41 50 Architectual Solutions 56 Graphic Concrete 58 Fitzgerald Formliners 62 Nirvana Insulated Panels 66 56 Maintenance and Installation – Sealants and Adhesives 42 Form Seal Silicone Selant 42 Foams 42 Epoxy Repair 42 Chemset 801 Xtrem 43 Chemset Reo 502 43 Formwork System 44 Spartan System Spartan Sideform Spartan Sideform Rubber End Caps Spartan Sideform Capping Spartan Rubber Base Inserts Reid Extruded Sections 45 46 46 47 47 47 Titan III Magnet Clamp Titan Magnet Adapter Plates Spartan Sideform Joiner Plates Titan Ball Lock Rail Strip Titan Screw Fix Bracket Panel ID Plates 48 48 49 49 49 49 product guide precast solutions
lifting systems Reid has the longest serving history, and most enviable reputation, in Australia when it comes to Concrete Lifting Products. If your business is lifting precast concrete, the range of products offered by Reid is the most comprehensive, researched and tested by any Australian supplier. Using Reid products gives you piece of mind that you are using the best, most reliable and most efficient. All Reid lifting products are AS 3850.1:2015 compliant. Reid don’t just supply the best product, but supply the highest standard of design support for every aspect of the precast and reinforcing process. product guide precast solutions 5
Lifting Systems SwiftLift 3Dx SwiftLift Stronger. Faster. Safer. Developed, and tested in Australia by Reid , the SwiftLift 3Dx85 anchor system provides high lifting capacities and levels of efficiency and productivity. The unique design distributes loads in the concrete in three dimensions, maximising capacity while reducing outward bursting loads and potential panel damage. The SwiftLift 3Dx85 provides precasters with one lifting solution to cover 90% of panels. The patented forged design, made from tough Alloy Steel, also allows for faster installation for Precasters. The compact design of the 3Dx is easier to manoeuvre around the mesh and fittings, yet delivers 8.5t capacity. Compliant to AS 3850.1:2015, 3Dx has been designed to meet the needs of the Australian precast market. AS 3850 Compliant 6 Features & Benefits Unique design distributes loads in the concrete in three dimensions, maximising capacity while reducing outward bursting loads and potential panel damage. Less reinforcement required due to advanced leg profile. Eliminates concrete spalling in shear to edge and rotational lifts of thin concrete elements. Complies with AS 3850.1:2015 for the complete system (anchor, clutch and void former). Hot dip galvanised for maximum corrosion protection. Extensively tested and independently verified. System colour code to minimise component selection errors. product guide precast solutions
Lifting Systems SwiftLift 3Dx 3Dx Design features 1 2 3 dimensional forged design made from tough Alloy Steel. Provides greater concrete anchorage and anchor strength. Faster installation for precasters. The compact design of the 3Dx is easier to manoeuvre around the mesh and fittings, yet delivers 8.5t capacity. 3 I-Beam design and Elongated tension bar hole. Symmetrical tapered clutch engagement hole. Provides maximum shear capacity without the need for a shear bar! Eliminates the congestion between the tension bar and the central mesh. Provides precasters with both a lower in-place-cost and installation efficiencies over comparative flame cut anchors. Forging allows for the profile of the clutch engagement hole to better match the profile of the clutch bolt. Provides for easier, and faster clutch engagement and remote release. Lifting System Product Codes Part Part No. STRONGER Anchor 3DX85 Suitable for panels up to 12 tonne. One lifting solution to cover 90% of panels. Part Part No. Lifting Clutch 3DX85LC FASTER Part Part No. No shear bars. No interference between tension bar and mesh. Easier and quicker clutch engagement and release. Void Former 3DX85VF Part Part No. Nail Plate 3DX85NP SAFER No sharp edges. Lighter than comparable capacity systems. AS 3850.1:2015 Performance Data (WLL) Part No. Panel Thickness Max WLL (mm) (tonne) 150 3DX85 175 200 8.5 Stripping Placement Tension Bar 10MPa 15MPa 20MPa 25MPa 32MPa 40MPa Tensile/Shear Tensile/Shear Tensile/Shear Tensile/Shear Tensile/Shear Tensile/Shear 7.00 / 2.15 7.50 / 2.45 8.00 / 2.83 8.25 7.00 / 2.45 7.50 / 2.70 8.00 / 3.00 8.50 8.50 8.50 7.00 / 2.65 7.50 / 2.80 8.00 / 3.00 8.50 product guide precast solutions Ø & Length (mm) N16 / 500mm 8.50 7
Lifting Systems SwiftLift JAWS SWIFTLIFT JAWS Reid SwiftLift JAWS Edge Lift Anchors – made from Australian DNA. Features & Benefits JAWS Edge Lift Anchors have been designed in Australia to perform under Australian conditions, in Australian concrete, reinforced with Australian reinforcing bar and mesh. Compliant to AS 3850.1:2015, JAWS offers Precasters edge lift solutions with a rated WLL across range 3t – 10t for typical concrete strengths. The JAWS teeth configuration allows extremely high retention loads in concrete without the lateral bursting forces that are generated by traditional wavy leg or hairpin anchors. JAWS will offer a range of WLL’s in panels down to 100mm thick and at lower concrete strength values. System colour code to minimise component selection errors. Compatible with existing Reid clutches and void formers. Eliminates concrete spalling in shear to edge and rotational lifts of thin concrete elements. Rated WLL across range 3t – 10t for typical concrete strengths. Range of WLL’s in panels down to 100mm thick and at lower concrete strength values. Unique design reduces outward bursting loads and potential panel damage. Less reinforcement required. Hot dip galvanised for maximum corrosion protection. Extensively tested and independently verified. AS 3850 Compliant 8 product guide precast solutions
Lifting Systems SwiftLift JAWS Lifting Anchor & complementary Accessories Product Codes 3t Jaws System 7t Jaws System 10t Jaws System Part Part No. Part No. Part No. Anchor SJL SJS SJU Lifting Clutch SJLLC 3DX85LC SJULC Void Former SJLVF 3DX85VF SJUVF Nail Plate SJLSP The JAWS system has three sizes 3t, 7t and 10t. SJU 10t Jaws SJS 7t Jaws 3DX85NP SJUNP SJL 3t Jaws AS 3850.1:2015 Performance Data (WLL) Panel Thickness (mm) Part No. 100 SJL SJL 125 150 175 200 Max WLL (tonne) Stripping Placement Tension Bar 15MPa 20MPa 25MPa 32MPa 40MPa Tensile/Shear Tensile/Shear Tensile/Shear Tensile/Shear Tensile/Shear Ø and Leg Length (mm) 30-60o 3.0 2.40 / 1.30 2.70 / 1.35 3.00* 3.00* 3.00* N12 x 300 3.0 2.70 / 1.50 3.00* / 1.50 3.00* 3.00* 3.00* N12 x 300 SJS 7.0 7.00*/ 2.00 7.00*/ 2.30 7.00 7.00 7.00 N16 x 500 SJU 10.0 7.10 / 2.20 7.60 / 2.40 8.00 8.40 8.90 N16 x 500 SJU 10.0 8.60 / 2.20 9.10 / 2.40 9.40 9.70 9.90 N16 x 750 SJL 3.0 3.00* / 1.50 3.00* / 1.50 3.00* 3.00* 3.00* N12 x 300 SJS 7.0 7.00*/ 2.30 7.00*/ 2.60 7.00 7.00 7.00 N16 x 500 SJU 10.0 7.90 / 2.30 8.60 / 2.60 9.10 9.60 10.00* N16 x 500 SJU 10.0 9.40 / 2.30 10.00* / 2.60 10.00* 10.00* 10.00* N16 x 750 SJU 10.0 10.00* / 2.30 10.00* / 2.60 10.00* 10.00* 10.00* N20 x 750 SJS 7.0 7.00*/ 2.60 7.00*/ 2.80 7.00 7.00 7.00 N16 x 500 SJU 10.0 8.70 / 2.60 9.50 / 2.80 10.00* 10.00* 10.00* N16 x 500 SJU 10.0 10.00* / 2.60 10.00* / 2.80 10.00* 10.00* 10.00* N16 x 750 SJU 10.0 10.00* / 2.60 10.00* / 2.80 10.00* 10.00* 10.00* N20 x 750 SJS 7.0 7.00*/ 2.70 7.00*/ 2.90 7.00 7.00 7.00 N16 x 500 SJU 10.0 9.50 / 2.70 10.00* / 2.90 10.00* 10.00* 10.00* N16 x 500 SJU 10.0 10.00* / 2.70 10.00* / 2.90 10.00* 10.00* 10.00* N16 x 750 SJU 10.0 10.00* / 2.70 10.00* / 2.90 10.00* 10.00* 10.00* N20 x 750 WLL Load capacities include minimum panel reinforcement: SL82, N16 perimeter, centrally placed * WLL limited by clutch product guide precast solutions 9
Lifting Systems FaceLift Systems Ramset FaceLifters Consistent with the Reid commitment to local testing, Ramset FaceLift Anchors have been extensively tested in Australian concrete. Analysis of the subsequent test data in accordance with AS 3850.1:2015 Appendix A results in Ramset FaceLift Anchors having Working Load Limit capacities that are far higher and more accurate than those simply calculated using the CCD method applicable for footed anchors. A fully featured FaceLift system with the security of additional reinforcing which provides durability and maximises safety. Solid fixing into reo/mesh via integral bar clip. Floating bar clip floats with mesh to prevent anchor movement when trafficked. Complies with AS3600-2009 for concrete cover. Full plastic underside protection to maximise concrete cover and withstand collisions. Easy and fast void removal. AS 3850 Compliant Increased safety with bolt in redundancy and guaranteed ductile failure mode in case of concrete failure or overloading. Part No. To Suit Panel Thickness (mm) Head Identification Pack Qty Load Group FL050125B 125 5TR107 16 5 tonne FL050150B 150 5TR132 16 5 tonne FL050175B 175 5TR157 16 5 tonne FL050200B 200 5TR157 16 5 tonne Compatible Clutch for Ramset FaceLifters Part No. Clutch Working Load Limit Colour 3DX85LC Reid SwiftLift 3Dx 8.5t Gold Image NOTES: 3DX85LC 10 product guide precast solutions
Lifting Systems FaceLift Systems Reid SwiftLift FaceLifters The Reid SwiftLift FaceLifter features a unique robust wire chair to ensure performance under the harshest conditions. High strength wire chair. Plastic coated feet. Close reinforcement placements. Solid fixing into reo/mesh via integral bar clip. Floating bar clip floats with mesh to prevent anchor movement when trafficked. AS 3850 Compliant Easy and fast void removal. Part No. To Suit Panel Thickness (mm) Head Identification Pack Qty Load Group RFL125 125 5 x 95 16 5 tonne RFL150 150 5 x 120 16 5 tonne RFL175 175 5 x 120 12 5 tonne RFL200 200 5 x 170 12 5 tonne Note: The SwiftLift Face Lifter uses a AS 3850.1:2015 compliant foot anchor. It requires a Reid SwiftLift 5LE clutch. Compatible Clutch for Reid SwiftLift FaceLifters Part No. Clutch Working Load Limit Colour Image 5LE Reid SwiftLift 5t Gold 1 NOTES: 5LE product guide precast solutions 11
Lifting Systems General Lifting General Lifting Reid SwiftLift Lifting Anchors, Clutches and accessories make lifting concrete components easy, efficient and safer during transportation, rigging and lifting of precast concrete elements. The SwiftLift system utilises a fully engineered approach combining cast-in lifting anchors, recess formers, and custom-fitting lifting clutches. Using the SwiftLift system results in fewer failures, saving time and costs due to damage or construction delays. SwiftLift Combination Anchors SwiftLift Combination Anchors feature a combined foot and eye. When used with a reinforcing hanger bar they are able to provide deeper anchorage and increased load capacity in thin wall or low strength concrete elements. The cutout foot and saddle like moulded eye opening provide support for the reinforcing hanger bar. All SwiftLift Combination Anchors comply with AS 3850.1:2015. Ln Part No. Shaft Diameter Da (mm) Head Diameter D1 (mm) Foot Diameter D2 (mm) Cross-hole Diameter D3 (mm) Length Ln (mm) Recess Form Load Group Pack Qty Max Radius (t) (mm) 1REA050 10 19 24 12 50 30 1.3 1REA065 10 19 24 12 65 30 1.3 2REA090 14 26 31 15 90 37 2.5 75 5REA090 20 36 41 20 90 47 5 *30 * still in the process of running-out old quantity stock, new stock will transition in coming months. NOTE: Load capacity may be limited by concrete strength and will be affected by the AS 3850 Compliant close proximity of other anchors or edges. See technical and design information for details. SwiftLift Eye Anchors Dia D3 Da SwiftLift Eye Anchors are higher load anchors which provide deeper anchorage and increased load capacity in thin wall or low strength concrete elements. They are ideal for bridge beams and other heavy precast concrete elements. All SwiftLift Eye Anchors comply with AS 3850.1:2015. D1 Ln Part No. Shaft Diameter Da (mm) Head Diameter D1 (mm) Cross-hole Diameter D3 (mm) Length Ln (mm) Recess Form Max Radius (mm) Load Group (t) Pack Qty 10EA180 28 47 25 180 59 10 10 20EA250 39 70 37 250 80 20 *4 * Still in the process of running-out old quantity stock, new stock will transition in coming months. NOTE: All SwiftLift Eye Anchors require a reinforcing hanger bar as per the technical and design information. Load capacity may be limited by concrete strength and will be affected by the close proximity of other anchors or edges. See technical and design information for details. 12 AS 3850 Compliant product guide precast solutions
Lifting Systems General Lifting SwiftLift Foot Anchors SwiftLift Foot Anchors are the most versatile and widely used anchors in the SwiftLift range. Available in a wide range of Working Load Limits (WLL), all SwiftLift Foot Anchors comply with AS 3850.1:2015. Consistent with the Reid commitment to local testing, SwiftLift Foot Anchors have been extensively tested in Australian concrete comprising of over 500 individual tests, and consuming approximately 150 tonnes of concrete. Part No. Description Shaft Diameter Da (mm) Head Diameter D1 (mm) Foot Diameter D2 (mm) 1.3 tonne WLL (Max) 10 19 25 Ln Length Ln (mm) Pack Qty 1LE 1FA045 45mm Foot Anchor 45 200 1FA055 55mm Foot Anchor 55 200 1FA066 66mm Foot Anchor 66 200 1FA085 85mm Foot Anchor 85 100 1FA120 120mm Foot Anchor 120 100 1FA240 240mm Foot Anchor 240 50 2.5 tonne WLL (Max) 14 26 35 2LE 2FA055 55mm Foot Anchor 55 100 2FA075 75mm Foot Anchor 75 100 2FA090 90mm Foot Anchor 90 80 2FA120 120mm Foot Anchor 120 50 2FA170 170mm Foot Anchor 170 25 5 tonne WLL (Max) 20 36 50 5LE 5FA075 75mm Foot Anchor 75 40 5FA095 95mm Foot Anchor 95 35 5FA120 120mm Foot Anchor 120 25 5FA170 170mm Foot Anchor 170 *20 5FA240 240mm Foot Anchor 240 15 10 tonne WLL (Max) 28 47 70 10LE 10FA150 150mm Foot Anchor 150 10 10FA200 200mm Foot Anchor 200 8 10FA340 340mm Foot Anchor 340 5 20 tonne WLL (Max) 38 70 98 20LE 20FA250 250mm Foot Anchor 250 4 20FA340 340mm Foot Anchor 340 2 20FA500 500mm Foot Anchor 500 2 700 1 32 tonne WLL (Max) 32FA700 50 88 135 700mm Foot Anchor Clutches 32LE * Still in the process of running-out old quantity stock, new stock will transition in coming months. NOTE: Load capacity may be limited by concrete strength and will be affected by the close proximity of other anchors or edges. See technical and design information for details. product guide precast solutions AS 3850 Compliant 13
Lifting Systems General Lifting SwiftLift Void Formers Rubber Void Former The Rubber Void Former is supplied with a bolt and wing nut for fixing to formwork. The recess former is split into two hinged halves that clamp around the head of the anchor as the wing nut is tightened against the outside of the formwork. Part No. R B Anchor Size 1RFRO 30 5 1.3t 2RFRO 37 7 2.5t 5RFRO 47 10 5.0t 10RFRO 59 10 10.0t 20RFRO 80 10 20.0t 32RFRO 109 12 32.0t Steel Round Void Former Steel formers are held in place using a central bolt through the formwork. Void Former Part No. Rubber Ring Part No. M B D R Anchor Size 1SRFRO 1RR M8 5 22 30 1.3t 2SRFRO 2RR M12 7 30 37 2.5t 5SRFRO 5RR M12 10 38 47 5.0t Articulated Void Former Articulated Void Formers are a steel void former which are split and hinged. They do not use rubber rings and are used in an identical way to Rubber Void Formers but have a more positive and rigid anchor location. 14 Part No. R M B Bolt Anchor Size 1SRFROART 30 M10 10 M10 1.3t 2SRFROART 37 M10 10 M10 2.5t 5SRFROART 47 M10 10 M10 5.0t product guide precast solutions
Lifting Systems General Lifting SwiftLift Lifting Clutch SwiftLift Lifting Clutches cover the full SwiftLift range from 1.3t to 32t WLL. SwiftLift Clutches have been designed so that they cannot spontaneously disengage whilst the system is under load at any orientation, provided they are correctly connected to the head of the correct anchor in the recess. When the lift is complete and the load released, the SwiftLift Clutch is quickly and simply disengaged. Part No. Pack Qty WLL (Max) 1LE 1 1.3t 2LE 1 2.5t 5LE 1 5.0t 10LE 1 10.0t 20LE 1 20.0t 32LE 1 32.0t SwiftLift Lifting Clutch markings 1 AS 3850 Compliant 1 2 2 WLL per clause 2.6 (iii) 3 3 Reid batch number (on underside) 4 5 Reid name & symbol per clause 2.6 5 Unique identifying serial number per clause 2.6 (i) Reid name & symbol per clause 2.6 (ii) (on side of sphere) 4 As per AS 3850.1:2015 clause 2.6, all clutches need to be permanently marked with a unique identifier (traceable to proof tests), the manufacturers symbol or name, and the WLL or compatible anchor identified. All Reid SwiftLift Lifting Clutches comply with this clause. product guide precast solutions Note: Clutch markings shown are typical of 1, 2 & 5t clutches. Markings on AS 3850.1:2015 compliant 10, 20 and 32t clutches may vary from that shown here. 15
reinforcing systems Reinforcing products from ramsetreid provide simple solutions for structural concrete connection, reducing both labour and material costs. Using ReidBar and ReidBar components provides many benefits for Precasters and Builders including: Suitable for very thin concrete sections, such as wall panels. Full range of threaded fittings for joining, anchoring and terminating. Simplifies the detailing and fixing of rebar. Reduces bar congestion problems; laps, cogs, eliminated in heavily reinforced areas. Eliminates cast-in starter bars to simplify transport and handling. 16 product guide precast solutions
Reinforcing ReidBar Systems ReidBar Systems ReidBar is a 500N Grade continuous threaded reinforcing system, enabling fast, easy and efficient reinforcement connections in any concrete structure. No need for complex calculations. Reduced formwork damage. Components achieve ultimate bar capacity and full bar strength. Reduced OH&S risk. More effective engineered connections. Meets the requirements of ‘Steel Reinforcing Materials, AS/NZS 4671:2001’. Simple, easy to use. No special tools required. Fast, no-fuss connections. Increased productivity. Improved structural integrity. Simplified detailing. Complete system for all applications. Ultimate strength development with short embedment. No protruding bars in precast elements. Suitable for thin concrete sections. ReidBar Reo Continuously threaded, hot rolled, Grade 500N reinforcing bar to AS 4671. Achieves efficient continuous reinforcing throughout the whole job. It is recommended that all ReidBar Reo is saw cut when used with ReidBar fittings. Part No. Length Bar Bundle Type (m) Pack Qty (approx 2 tonnes) RB126 RB12 6 364 RBA166 RBA16 6 206 RBA206 RBA20 6 132 RB256 RB25 6 85 RB326 RB32 6 52 *Lead time applies ReidBar Starters ReidBar starter bar systems have been developed to provide full strength and positive connections between precast concrete panels, floor slabs and insitu suspended floors. Part No. Description Length (mm) Pack Qty RB12SB Starter bar for RB12 fittings 540 50 RBA16SB Starter bar for RBA16 fittings 660 50 RBA20SB Starter bar for RBA20 fittings 850 25 RB25SB Starter bar for RB25 fittings 1150 25 RB32SB Starter bar for RB32 fittings 1450 10 Cut to length available and subject to leadtimes product guide precast solutions 17
Reinforcing ReidBar Systems (B) ReidBar Coupler System to couple two ReidBar together. Commonly utilised for wet joints and panel to panel applications. (A) Part No. Description Outer Diameter (A) (mm) Length (B) (mm) Hex A/F (mm) Pack Qty RB12C ReidBar Coupler for RB12 22 90 25 70 RBA16C ReidBar Coupler for RBA16 30 102 30 45 RBA20C ReidBar Coupler for RBA20 33 129 36 20 RB25C ReidBar Coupler for RB25 43 180 45 25 RB32C ReidBar Coupler for RB32 55 210 57 4 RB12CG* ReidBar Coupler for RB12 (Gal) 22 90 25 70 RBA16CG* ReidBar Coupler for RBA16 (Gal) 30 102 30 45 RBA20CG* ReidBar Coupler for RBA20 (Gal) 33 129 36 20 RB25CG* ReidBar Coupler for RB25 (Gal) 43 180 45 10 RB32CG* ReidBar Coupler for RB32 (Gal) 55 210 57 4 *Lead time applies for Hot Dip Galvanised components (B) ReidBar to Metric Couplers The ReidBar to Metric Coupler is ideal when a fully engineered, full capacity fixing is required close to an edge, along an edge of a panel or at close spacings. Description Length (mm) (B) Hex A/F (mm) Metric Thread Length (mm) Pack Qty RB12M16CG RB12 to M16 90 25 40 70 RBA16M20CG RBA16 to M20 102 30 45 50 RBA20M24CG RBA20 to M24 122 35 50 20 Part No. NOTES: 18 product guide precast solutions
Reinforcing ReidBar Systems (B) ReidBar Inserts System to anchor ReidBar. Commonly utilised for floor to wall or floor to panel connections. (A) Part No. Description Foot Diameter (A) (mm) Length (B) (mm) Cross Hole Diameter (mm) Pack Qty RB12TI ReidBar Insert for RB12 38 100 N/A 60 RBA16TI ReidBar Insert for RBA16 50 118 N/A 30 RBA20TI ReidBar Insert for RBA20 64 148 N/A 20 RB25TI ReidBar Insert for RB25 80 191 N/A 6 RB32TI ReidBar Insert for RB32 101 210 N/A 4 RB12TIG* ReidBar Insert for RB12 (Gal) 38 100 N/A 60 RBA16TIG* ReidBar Insert for RBA16 (Gal) 50 118 N/A 30 RBA20TIG* ReidBar Insert for RBA20 (Gal) 64 148 N/A 20 RB25TIG* ReidBar Insert for RB25 (Gal) 80 191 N/A 6 RB32TIG* ReidBar Insert for RB32 (Gal) 101 210 N/A 5 RB12RI ReidBar Rebate Insert for RB12 39 78 14.5 60 RBA16RI ReidBar Rebate Insert for RBA16 51 96 14.5 30 *Lead time applies for Hot Dip Galvanised components ReidBar Nut System to fix and/or tighten ReidBar. Part No. Description Length (mm) Hex A/F Hex A/C Pack Qty RB12N ReidBar Nut for RB12 40 25 25 140 RBA16N ReidBar Nut for RBA16 45 30 34 50 RBA20N ReidBar Nut for RBA20 45 36 42 25 RB25N ReidBar Nut for RB25 65 46 53 30 RB32N ReidBar Nut for RB32 82 55 63.5 15 RB12NG* ReidBar Nut for RB12 (Gal) 40 25 25 50 RBA16NG* ReidBar Nut for RBA16 (Gal) 45 30 34 50 RBA20NG* ReidBar Nut for RBA20 (Gal) 45 36 42 50 RB25NG* ReidBar Nut for RB25 (Gal) 65 46 53 30 RB32NG* ReidBar Nut for RB32 (Gal) 82 55 63.5 30 *Lead time applies for Hot Dip Galvanised components product guide precast solutions 19
Reinforcing ReidBar Systems ReidBar Wing Nut System to fix and/or tighten ReidBar. Commonly utilised for formwork systems. Part No. Description Hex A/F Height (mm) Overall Diameter (mm) Pack Qty RB12WN ReidBar Wing Nut for RB12 22 40 58 100 RBA16WN ReidBar Wing Nut for RBA16 30 51 98 30 C ReidBar Grout Sleeve Are used for connecting ReidBar lengths where one side of the connection must be female or when converting to standard reinforcing bar. The internal surfaces are ribbed to ensure full bar break after sleeve has been filled with high performance cementitious grout (65MPa, 28-day compressive strength). B A D Part No. (A) Max Internal Embedment Depth (mm) (B) Body ID (mm) (C) Internal Grout Hole (D) Tube Length (mm) Suits RB12GS 150 28-40 21 200 RB12 RBA16GS 190 32 21 240 RBA16 RBA20GS 224 40 21 290 RBA20 RB25GS 274 48 21 360 RB25 320 55 26 445 RB32 RB32GS NOTES: 20 product guide precast solutions
Reinforcing ReidBar Accessories ReidBar Accessories ReidBar fittings are accompanied by various accessories that make installation easier. ReidBar Nail Plates Supports for fixing to boxing and formwork for positioning all ReidBar internally threaded components. Part No. Description Suits Pack Qty NP12RB ReidBar Nailing Plate for RB12 RB12TI, RB12C 100 NP16RB ReidBar Nailing Plate for RBA16 RBA16TI, RBA16C 100 NP20RB ReidBar Nailing Plate for RBA20 RBA20TI, RBA20C 100 NP25RB ReidBar Nailing Plate for RB25 RB25TI, RB25C 100 NP32RB ReidBar Nailing Plate for RB32 RB32TI, RB32C 100 ReidBar Stick On Support ReidBar Stick-On supports are designed for push on-pull off support ensuring 90º to surface installation. Part No. Description Suits Pack Qty RB12SP ReidBar Stick on Support for RB12 RB12 100 RBA16SP ReidBar Stick on Support for RBA16 RBA16 100 NOTES: product guide precast solutions 21
Reinforcing ReidBar Accessories ReidBar Threaded Insert Chair Designed to enable ReidBar inserts to be easily used for near face applications in precast elements. Used in conjunction with the appropriate nail plate, the TI Chair is fully adjustable to suit 125, 150, 175, and 200mm panel thicknesses and can be trimmed for intermediate thicknesses. Nail Plate Panel Thickness 125 to 200mm Part No. Chair Adaptor Legs Panel Thickness Pack Qty TICHAIR 1 1 3 125-200 90 Insert NOTE: 1: The chair will take all inserts from RB12 to RBA20. 2: Use appropriate size nail plate to attach insert into chair. 3: Can be used for all metric and coil thread inserts with appropriate nailing plate. Circular Spacer The unique design offers accurate cover for 360 degrees. It will not twist when in position due to the in-built sleeves which adjusts to hold the bar firmly. As the size of the bar increases the cover remains the same. Ideal for: Civil precast and commercial construction Columns and piers Bar spacers in conduit Part No. X Cover Y O/A Diameter Bar Size CB20CR12 20 50 8-12 CB25CR12 25 60 8-12 CB30CR12 30 70 8-12 CB40CR12 40 90 8-12 CB50CR12 50 110 8-12 CB65CR12 65 145 8-12 CB75CR12 75 160 8-12 NOTES: 22 product guide precast solutions
Reinforcing Reinforcing Support Chairs Reinforcing Support Chairs Mesh Chair The mesh chair is designed to clip easily to the intersection of the mesh, providing greater strength and stability. Mesh chairs can be used with extensions for added height if required. Cover (mm) Pack Qty MESH20 20 100 MESH25 25 100 MESH30 30 100 MESH35 35 100 MESH40 40 100 MESH50 50 100 MESH60 60 100 MESH65 65 100 MESH75 75 100 Cover Part No. Panel Chair Designed to support single layered mesh. The easy push on clip mechanism allows the chair to swing into a vertical position when lowering the mesh into the form and suits all mesh sizes including N12 bars. Dimples located at the base of the legs ensures minimum exposure. Pack Qty Pallet Qty BCPANEL3040 30/40 100 5000 BCPANEL5060 50/60 100 5000 BCPANEL6575 65/75 100 5000 BCPANEL90100 90/100 100 5000 65-50mm Cover (mm) 75-60mm Part No. Top Deck Chair The dual height top deck chair has been designed to support both top mesh and top reinforcing bars in suspended decks, thick tilt-up panels and any tall spacer applications, where strength and stability is critical. Part No. a (Height) b (Height) Pack Qty BPDST090100 90 100 50 BPDST110120 110 120 50 BPDST130140 130 140 50 BPDST150160 150 160 50 BPDST170180 170 180 50 BPDST190200 190 200 50 product guide precast solutions (a) (b) 23
Reinforcing Reinforcing Support Chairs Bar Chair Fast Clip Bar Chairs accommodate bar sizes from 4mm to 20mm. Each chair is identified by cover and can be used with extensions for added height and stability if required. Cover (mm) Pack Qty FCB25 25 100 FCB30 30 100 FCB35 35 100 FCB40 40 100 FCB50 50 100 FCB60 60 100 FCB65 65 100 FCB75 75 100 Cover Part No. 30mm Bar Deck Rail The 750mm long plastic deck rail is a continuous spacer for formwork applications, with sets of vertical legs at approximately 75mm centres and another central leg in between the sets; the deck rail is strong and stable, yet provides minimum exposure. Part No. Height "h" mm Pallet Qty BDR030 30 1300 BDR035 35 1300 BDR040 40 1100 BDR065 65 800 BDR075 75 700 BDR100 100 500 NOTES: 24 productproduct guide guide commercial precast construction solutions
NOTES product guide precast solutions 25
precast connections Not only do Reid offer an extensive range of AS 3850.1:2015 compliant ferrules to suit almost every application, but also a range that delivers consistent reliability and quality, supported with technically superior design information. Extensive research, development and testing are invested in all Reid ferrules, with performance data derived and verified through hundreds of tests, utilising both in-house and independent testing facilities. 26 product guide precast solutions
Connections Metric Threaded Systems Elephant Foot Ferrule The Reid Elephant Foot Ferrule is a premium grade, medium to heavy duty, cast-in ferrule, and compliant to AS 3850.1:2015. Elephant Foot Metric Ferrule Key Features: # FE20095 & FE20095GH are the only ferrules recommended for bracing, therefore are the only ferrules requiring AS 3850.1:2015 WLL. 5.8 grade steel or 316 grade Stainless Steel. AS 3850 Compliant Use in near or far face applications with our range of accessories.
Reid BraceSet Bracing Anchor 52 Reid Footed Bracing Ferrule and Coil Bolt 53 RapidBrace 54 Reid Shims 55 Architectual Solutions 56 Graphic Concrete 58 . If your business is lifting precast concrete, the range of products offered by Reid is the most comprehensive, researched and tested by any Australian supplier.
Newspaper clipping, “Senator Reid’s Funeral” Newspaper clipping with transcript of letter written by Rhoda S. Reid to David S. Reid (her brother) in 1844 when he was a . Wadesboro, NC dated May 12, 1870 2
2019 Alfa Romeo Giulia 2019 BMW X7 2019 Alfa Romeo Stelvio 2019 BMW Z4 2019 Audi A3 2019 Buick Cascada 2019 Audi A4 2019 Buick Enclave 2019 Audi A5 2019 Buick Encore 2019 Audi A6 2019 Buick Envision 2019 Audi A7 2019 Buick LaCrosse 2019 Audi A8 2019 Buick Regal 2019 Audi Allroad
Biography Victor Stafford Reid was born on May 1, 1913, in Kingston, Jamaica, to Alexander and Margaret Reid. Victor, his two brothers and one sister grew up in Kingston where they attended school. He was educated at Central Branch Primary and the Kingston Technical High School. During his early life, Reid was employed in various positions. He also
4 ConCerts at the university diary autumn - winter 2017 sePteMBer 26 1.10pm Methodist Church Sirocco Winds FREE oCtoBer 3 1.10pm Methodist Church Students from the Reid School of Music FREE 6 1.10pm St Cecilia’s Hall Adam Brown FREE 13 1.10pm Reid Concert Hall John Kitchen FREE 17 1.10pm Reid Concert Hall The
promoted the widespread applications of person re-identification (ReID). However, ReID systems inherit the vulnerability of DNNs to malicious attacks of visually in-conspicuous adversarial perturbations. Detection of adver-sarial attacks is, therefore, a fundamental requirement for robust ReID systems. In this work, we propose a Multi-
CONFIDENTIAL CLIENT INTAKE INFORMATION M. Reid Stell, LMHC Reid Stell Counseling 14535 Bel-Red Rd, B-202 Bellevue, WA 98007 O (206) 457-3038 F (206) 858-9206 ReidStellCounseling@gmail.com
M. Reid Stell, LMHC Reid Stell Counseling 901 Boren Avenue, Suite 701 Seattle, WA 98104 O (206) 457-3038 F (206) 858-9206 ReidStellCounseling@gmail.com RELATIONSHIP INFO: Relationship Status: Single Married Cohabitating Divorced Widowed Sexuality and Straight Gay/Lesbian Bisexual Questioning Other
accordance with asset management guidelines and procedures established by the Director of Finance & Administration or a designee. 8 Asset Inventory Departments will conduct a full inventory of all property under their stewardship, in accordance with the inventory schedule developed by F&A, and will provide the results of that inventory to the Director of Finance & Administration or a designee .
