Product Data Sheet: Rosemount Manifolds
Product Data SheetNovember 201500813-0100-4733, Rev PDRosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs Integral design enables “flangeless” valve integration 2-, 3-, and 5-valve configurations Compact, lightweight design Easy in-process calibration Direct-mount capability
Rosemount ManifoldsNovember 2015Selection GuideRosemount 305 Integral ManifoldSee “Options” on page 28.Rosemount 304 ConventionalManifoldSee “Options” on page 28. Assembles directly to transmitter, eliminating need for flange 2-, 3-, and 5-valve configuration Attaches to transmitter flange Available in coplanar and traditional styles 2-, 3-, and 5-valve configurations Compact, lightweight assembly Traditional (Flange Flange, Flange NPT) and wafer styles Factory assembled, seal-tested, and calibrated Factory assembled, seal-tested, and calibrated 50% fewer leak points than conventionaltransmitter/flange/manifold interfaceRosemount 304 Conventional Manifold - Traditional StyleRosemount 305 Integral Manifold - Coplanar StyleRosemount 306 In-line ManifoldSee “Options” on page 28. Assembled directly to in-line pressure transmitters Block-and-bleed and 2-valve configurations Male or female threaded NPT process connectionRosemount 304 Conventional Manifold - Wafer StyleRosemount 306 In-line ManifoldContentsValve Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . .192EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsValve ConfigurationBlock-and-bleedThree-valveThe block-and-bleed configuration is available on theRosemount 306 Manifold for use with in-line gage and absolutepressure transmitters. A single block valve provides instrumentisolation and a plug provides drain/vent capabilities.The 3-valve configuration is available on Rosemount 305 and304 Manifolds for use with differential pressure andmulti-variable transmitters. Two block valves provideinstrument isolation, and one equalize valve is positionedbetween the high and low transmitter process connections.306 Manifold305 ManifoldTransmitterTransmitterBleed cessIsolateProcessTwo-valve304 (Traditional) ManifoldTransmitterThe 2-valve configuration is available on Rosemount 305, 306,and 304 Manifolds for use with absolute and gage pressuretransmitters. A block valve provides instrument isolation and adrain/vent valve allows venting, draining, or calibration.Test (plugged)Equalize305 and 306 304 (Wafer) ManifoldTransmitterIsolateProcessEqualize304 ManifoldIsolateTransmitterIsolateProcessTest /RosemountNoteTest/vents receive plastic caps to protect threadedconnections unless otherwise noted.NoteTest (plugged) connections receive 1/4-in. NPT plugsunless otherwise noted.3
Rosemount ManifoldsNovember 2015Five-valveFive-valve natural gasThe 5-valve configuration is available on Rosemount 305 and304 Manifolds for use with differential pressure andmultivariable transmitters. Two block valves provide instrumentisolation and one equalize valve is positioned between the highand low transmitter process connections. In addition, twodrain/vent valves allow for controlled venting, 100% capture ofvented or drained process, and simplified in-process calibrationcapability.The 5-valve natural gas configuration is available on theRosemount 305 and 304 Manifolds for use with differentialpressure and multivariable transmitters. Two block valvesprovide instrument isolation and a single drain/vent valve allowsfor controlled venting, 100% capture of vented or drainedprocess, and simplified in-process calibration capability. Inaddition, two equalize valves provide extra protection fromleaking to ensure DP signal integrity.305 Manifolds and 304 (Wafer)305 Manifolds and 304 plugged)Equalize EqualizeIsolateProcessIsolateProcessNoteTest/vents receive plastic caps to protect threadedconnections unless otherwise noted.NoteTest (plugged) connections receive 1/4-in. NPT plugsunless otherwise noted.4EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsOrdering InformationRosemount Manifolds can be ordered as a stand-alone product or as an integrated assembly attached to a transmitter.Stand-alone manifold1. Reference the “Selection Guide” on page 2 for assistance on choosing the type of manifold.2. Specify a completed model number by referencing the applicable ordering table for the selected manifold type: Rosemount 305 Integral Manifold, see page 6. Rosemount 306 In-line Manifold, see page 8. Rosemount 304 Conventional Manifold, see page 10.Transmitter/manifold assembly1. Specify a completed Rosemount transmitter model number by referencing the applicable product data sheet.2. Specify a completed manifold model number by referencing the applicable ordering table for the selected manifold type: Rosemount 305 Integral Manifold, see page 6. Rosemount 306 In-line Manifold, see page 8 Rosemount 304 Conventional Manifold, see page 10.3. Verify the transmitter model number contains the correct “Process Connection” code or “Manifold Option” code for thedesired transmitter manifold assembly (see Table 1).Table 1. Ordering Codes for a Transmitter/Manifold ss connection code“Manifold” option Rosemount5
Rosemount ManifoldsNovember 2015Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. Seepage 12 for more information on material selection.Table 2. Rosemount 305 Integral Manifold Ordering Information The Standard offering represents the most common options. The starred options ( ) should be selected for best delivery.The Expanded offering is subject to additional delivery lead time.ModelProduct description0305Integral ManifoldManufacturerR RosemountManifold styleCCoplanar TTraditional MTraditional (DIN-compliant flange) Manifold type22-valve 33-valve 5(1)5-valve 6(2)5-valve natural gas metering pattern 7(2)(3)2-valve (per ASME B31.1 [ANSI] power and piping code)8(2)(3)3-valve (per ASME B31.1 [ANSI] power and piping code)9(2)(3)5-valve (per ASME B31.1 [ANSI] power and piping code)BodyBonnetStem and tip/ball2316 SST/316L SST316 SST316 SST3(4)Alloy C-276Alloy C-276Alloy C-2764Alloy 400Alloy 400Alloy 400/K-500 Process connection style/ –18 NPT female / –14 NPT female A(5)1 4B(6)1 2Packing material1(7)PTFE2(8)Graphite-based Valve seat1Integral 5Soft delrin (only available with natural gas metering pattern) OptionsExtended product warrantyWR33-year limited warranty WR55-year limited warranty 6EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsTable 2. Rosemount 305 Integral Manifold Ordering Information The Standard offering represents the most common options. The starred options ( ) should be selected for best delivery.The Expanded offering is subject to additional delivery lead time.Mounting bracketsB1Bracket for 2-in. pipe mounting, CS bolts B3(9)Flat bracket for 2-in. pipe mounting, CS bolts B4SST mounting bracket for 2-in. pipe mounting, 300 SST bolts B7B1 bracket with 316 SST bolts B9(9)B3 bracket with 316 SST bolts BA316 SST B1 bracket with 316 SST bolts BC(9)316 SST B3 bracket with 316 SST bolts BE316 SST B4 bracket with 316 SST bolts Bolt materialsL4(10)Austenitic 316 SST bolts L5ASTM A193, Grade B7M bolts L8ASTM A193, Class 2, Grade B8M bolts Cleanings(11)P2Cleaning for special services Material recommendations for NACE (4)(12)SGSour gas (meets NACE MR 0175/ISO 15156, MR 0103) Adapters(13)DF1 2/ –14 NPT female flange adapterDQ12 mm ferrule tube flange adapter Process flange bolting connection(14)HK10 mm (M10) process flange bolting connection HL12 mm (M12) process flange bolting connection Typical coplanar integral manifold model number: 305 R C 3 2 B 1 1 B41.2.3.4.5.6.7.8.9.10.11.12.13.14.Not available with traditional manifold style T.Only available with coplanar manifold style code C.Only available with 316 SST materials of construction code 2 and Graphite-based backing code 2.Materials of construction comply with recommendations per NACE MR 0175/ISO 15156 for sour oil field production environments. Environmental limits apply tocertain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.Only available with traditional manifold style codes T and M.Not available with traditional manifold style code M.Includes PTFE tape on drain/vent valves and plugs.Includes graphite tape on drain/vent valves and plugs.Not compatible with the Rosemount 3095 Transmitter.Not available with ASME B31.1 manifold type codes 7, 8, and 9.Not available with graphite-based packing material code 2.Only allowed with material of construction code 2.Only allowed with traditional manifold style codes T and M. Not allowed with graphite-based packing code 2.Only available with traditional manifold style code M.EmersonProcess.com/Rosemount7
Rosemount ManifoldsNovember 2015Specification and selection of product materials, options, or components must be made by the purchaser of the equipment. Seepage 12 for more information on material selection.Table 3. Rosemount 306 Pressure Manifold Ordering Information The Standard offering represents the most common options. The starred options ( ) should be selected for best delivery.The Expanded offering is subject to additional delivery lead time.ModelProduct description0306Pressure ManifoldManufacturerR RosemountManifold styleT ThreadedManifold type1Block-and-bleed 22-valve 3(1)2-valve (per ASME B31.1 power piping code)BodyBonnetStem and tip/ball2316 SST/316L SST316 SST316 SST3(2)(3)Alloy C-276Alloy C-276Alloy C-276 Process connection/ –14 male NPT process connection for In-line transmitter / –14 male NPT process connection for Wireless Pressure Gauge / –14 female NPT process connection for In-line transmitter / –14 female NPT process connection for Wireless Pressure Gauge AA1 2AW1 2BA(2)1 2BW(2)1 2Packing material1(4)PTFE2(5)Graphite-based Valve seat1Integral OptionsExtended product warrantyWR33-year limited warranty WR55-year limited warranty Cleanings(6)P28Cleaning for special servicesEmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsTable 3. Rosemount 306 Pressure Manifold Ordering Information The Standard offering represents the most common options. The starred options ( ) should be selected for best delivery.The Expanded offering is subject to additional delivery lead time.Material recommendations for NACE(3)(7)SGSour gas (meets NACE MR 0175/ISO 15156, MR 0103) Typical integral manifold model number: 306 R T 2 2 BA 1 11.2.3.4.5.6.7.Only available with 316 SST materials of construction and graphite-based packing.Not available with block-and-bleed manifold typeMaterials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply tocertain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.Includes PTFE tape on drain/vent valves and plugs.Includes graphite tape on plugs.Not available with graphite-based packing material code 2.Only allowed with material of construction code 2.EmersonProcess.com/Rosemount9
Rosemount ManifoldsNovember 2015Specification and selection of product materials, options, or components must be made by the purchaser of the equipment.See page 12 for more information on material selection.Table 4. Rosemount 304 Conventional Manifold Ordering Information The Standard offering represents the most common options. The starred options ( ) should be selected for best delivery.The Expanded offering is subject to additional delivery lead time.ModelProduct description0304Conventional ManifoldManufacturerR RosemountManifold styleTTraditional (Flange Flange or Flange NPT)W(1)Wafer Manifold type2(2)2-valve 33-valve 5(3)5-valve 6(2)5-valve natural gas metering pattern 7(2)(4)2-valve (per ASME B31.1 [ANSI] power and piping code)8(2)(4)3-valve (per ASME B31.1 [ANSI] power and piping code)BodyBonnetStemTip2316 SST/316L SST316 SST316 SST316 SST 5CS316 SST316 SST316 SST Process connection styleB1 2 F(2)Flanged / –14 NPTPacking material1(5)PTFE2(1)Graphite-based Bolts1For assembly to 2051/3051 traditional flange 2For assembly to 2051/3051 DIN compliant traditional flange 3For assembly to 2051/3051 coplanar flange 10EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsTable 4. Rosemount 304 Conventional Manifold Ordering Information The Standard offering represents the most common options. The starred options ( ) should be selected for best delivery.The Expanded offering is subject to additional delivery lead time.OptionsExtended product warrantyWR33-year limited warranty WR55-year limited warranty Mounting bracketsVC(2)Manifold heavy duty mounting bracket, CS for traditional style VS(2)Manifold heavy duty mounting bracket, 316 SST for traditional style B4(3)Manifold SST mounting bracket for 2-in. pipe mount with series 300 SST bolts for wafer style Adapters(6)DF1 2/ –14 NPT Female Flange Adapter DT1 2/ -in. ferrule tube flange adapter DQ12 mm ferrule tube flange adapter L4(7)Austenitic 316 SST bolts L5ASTM A193, Grade B7M bolts L8ASTM A193, Class 2, Grade B8M bolts Bolt materialMaterial recommendations for NACE(1)(8)SGSour gas (meets NACE MR 0175/ISO 15156, MR 0103) Cleanings(9)P2Cleaning for special serviceHeater block kits(10)SBSteam block kit, 1/4-in. NPT connection Typical model number: 0304 R T 3 2 B 1 1 VS1.2.3.4.5.6.7.8.Only allowed with material of construction code 2.Not available with wafer manifold style code W.Not available with traditional manifold style code T.Only available with 316 SST materials of construction code 2 and graphite-based packing code 2.Includes PTFE tape on drain/vent valves and plugs.Only allowed with both manifold style code T and process connection code F. Not allowed with Graphite-based packing code 2.Not available with manifold type codes 7, 8.Materials of construction comply with recommendations per NACE MR 0175/ISO 1516 for sour oil field production environments. Environmental limits apply tocertain materials. Consult latest standard for details. Selected materials also conform to NACE MR 0103 for sour refining environments.9. Not available with Graphite-based packing material code 2.10. Not available with manifold type code 6.EmersonProcess.com/Rosemount11
Rosemount ManifoldsNovember 2015SpecificationsMaterial selectionEmerson Process Management provides a variety of Rosemount product with various product options and configurations includingmaterials of construction that can be expected to perform well in a wide range of applications. The Rosemount product informationpresented is intended as a guide for the purchaser to make an appropriate selection for the application. It is the purchaser’s soleresponsibility to make a careful analysis of all process parameters (such as all chemical components, temperature, pressure, flow rate,abrasives, contaminants, etc.), when specifying product, materials, options and components for the particular application. Emersonis not in a position to evaluate or guarantee the compatibility of the process fluid or other process parameters with the product,options, configuration or materials of construction selected.Pressure and temperature ratingsFigure 1. Rosemount 305 Integral ManifoldsPTFE packed, soft delrin seatPTFE packed, integral seatGraphite packed, integral seatGraphite packed (ASME B31.1), integral seat6000(414)Pressure psig 0100(-18) (38)200(93)300 400 500 600 700 800 900 1000(149) (204) (260) (316) (371) (427) (482) (538)Temperature F ( C)Table 5. Rosemount 305 Integral Manifolds(1)PackingSeatPressure and temperature ratingsPTFEIntegral6092 psi @ 200 F (420 bar @ 93 C)4000 psi @ 400 F (276 bar @ 204 C)PTFESoft delrin6092 psi @ 200 F (420 bar @ 38 C)GraphiteIntegral6092 psi @ 200 F (420 bar @ 93 C)1500 psi @ 750 F (103 bar @ 399 C)Graphite (ASME B31.1)Integral6092 psi @ 100 F (420 bar @ 38 C)2915 psi @ 1000 F (201 bar @ 538 C)1.12Except option HK:PTFE, integral seat: 2324 psi @ 200 F (160 bar @ 93 C), 1680 psi @ 400 F (116 bar @ 204 C)Graphite, integral seat: 2324 psi @ 200 F (160 bar @ 93 C), 1125 psi @ 750 F (78 bar @ 399 C)EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsFigure 2. Rosemount 306 In-line ManifoldsPTFE packed, integral seatGraphite packed, integral seatGraphite packed (ASME B31.1), integral seatPressure psig )00100(-18) (38)200(93)300 400 500 600 700 800 900 1000(149) (204) (260) (316) (371) (427) (482) (538)Temperature F ( C)Table 6. Rosemount 306 In-line ManifoldsPackingSeatPressure and temperature ratingsPTFEIntegral10000 psi @ 85 F (689 bar @ 29 C)4000 psi @ 400 F (276 bar @ 204 C)GraphiteIntegral6000 psi @ 200 F (414 bar @ 93 C)1500 psi @ 750 F (103 bar @ 399 C)Graphite (ASME B31.1)Integral6000 psi @ 100 F (414 bar @ 38 C)2915 psi @ 1000 F (201 bar @ 538 C)EmersonProcess.com/Rosemount13
Rosemount ManifoldsNovember 2015Figure 3. Rosemount 304 Conventional ManifoldsPTFE packed, integral seatGraphite packed - wafer, integral seatGraphite packed - flanged (SST), integral seatGraphite packed - flanged (CS), integral seatGraphite packed (ASME B31.1), integral seat6000(414)Pressure psig 0100(-18) (38)200(93)300 400 500 600 700 800 900 1000(149) (204) (260) (316) (371) (427) (482) (538)Temperature F ( C)Table 7. 304 Conventional ManifoldsPackingSeatPressure and temperature ratingsPTFEIntegral6000 psi @ 200 F (414 bar @ 93 C)4000 psi @ 400 F (276 bar @ 204 C)Graphite - waferIntegral6000 psi @ 200 F (414 bar @ 93 C)1500 psi @ 750 F (103 bar @ 399 C)Graphite - flanged (SST)Integral6000 psi @ 200 F (414 bar @ 93 C)1500 psi @ 1000 F (103 bar @ 538 C)Graphite - flanged (CS)Integral6000 psi @ 200 F (414 bar @ 93 C)1500 psi @ 800 F (103 bar @ 427 C)Graphite (ASME B31.1)Integral6000 psi @ 100 F (414 bar @ 38 C)2915 psi @ 1000 F (201 bar @ 538 C)14EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsProcess connectionsTable 8. Rosemount 305 Integral ManifoldTest/vent connections/ –18 female NPT1 4StyleConnectionCoplanar1 2Manifold bolts/ –18 female NPT(process adapters optional)Standard material is plated Carbon Steel per ASTM A449, Type 1Traditional/ –14 female NPT1 4Optional process adaptersAlternative bolt materials offered through option codes:/ –14 female NPT flange adapter L4 for Austenitic 316 Stainless Steel bolts12 mm ferrule tube flange adapter L5 for ASTM A193, Grade B7M Bolts L8 for ASTM A193, Class 2, Grade B8M bolts1 2Table 9. Rosemount 306 In-line ManifoldStyleConnectionBlock-and-bleed1 22-valve1 2/ –14 male NPT/ –14 NPT (male or female)Table 10. Rosemount 304 Conventional ManifoldStyleConnectionFlange by pipe1 2Flange by flange21/8-in. (54 mm) center-to-centerconnection (process adapters required)Wafer1 2/ –14 female NPT/ -14 female NPTProcess adapters/ –14 female NPT flange adapter1 2/ -in. ferrule tube flange adapter1 212 mm ferrule tube flange adapterInstrument connectionsTable 11. Manifold - Transmitter InterfaceModelConnectionRosemount 305Integral ManifoldMounted directly to coplanar sensormodule of transmitter, 1.3-in. (287 mm)center-to-center process isolatorsRosemount 306In-line Manifold1 2Rosemount 304ConventionalManifoldMounted to traditional transmitterflange, 21/8-in. (54 mm) center-to-centerconnection per IEC 61518, Type Bshut-off device (without spigot)/ –14 male NPTEmersonProcess.com/Rosemount15
Rosemount ManifoldsNovember 2015O-ringsFigure 4. Rosemount 305 Integral ManifoldSensor module-to-manifold O-ringsSpecified in the transmitter model number.Figure 5. Rosemount 304 Conventional ManifoldManifold-to-flange O-ringsSame material as specified by manifold “Packing Material” selection.(1)Flange adapter O-ringsGlass-filled PTFE1.16Available in packing material code 1 (PTFE) or code 2 (Graphite).EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsMaterials of constructionProcess wettedTypicalTable 12. Rosemount 305 Integral ManifoldFigure 6. Typical Rosemount Manifold ValveComponentSSTAlloy C-276SST withSG optionBody316 SST/316L SSTAlloy C-276316 SST/316L SSTBall/tip316 SST/316Ti SSTAlloy C-276Alloy C-276Stem316 SSTAlloy C-276Alloy eBonnet316 SSTAlloy C-276316 SSTPipe plug316 SSTAlloy C-276316 SSTDrain/vent valve316 SSTAlloy C-276Alloy C-276ABECDTable 13. Rosemount 306 In-line ManifoldComponentSSTAlloy C-276SST withSG optionBody316 SST/316L SSTAlloy C-276316 SST/316L SSTBall/tip316 SST/316Ti SSTAlloy C-276Alloy C-276Stem316 SSTAlloy C-276Alloy eBonnet316 SSTAlloy C-276316 SSTPipe plug316 SSTAlloy C-276316 SSTBleed screw316 SST/316Ti SSTAlloy C-276Alloy C-276A. BonnetB. StemC. PackingD. Ball/tipE. BodyTable 14. Rosemount 304 Conventional ManifoldComponentSSTCSSST withSG optionBody316 SST/316L SSTCS316 SST/316L SSTBall/tip316 SST/316Ti SST316 SSTAlloy C-276Stem316 SST316 SSTAlloy 6 SST316 SST316 SSTPipe plug316 SSTCS316 SSTEmersonProcess.com/Rosemount17
Rosemount ManifoldsNovember 2015Estimated weightTable 15. Rosemount 305 Integral ManifoldDescriptionWeight2-valve coplanar4.5 lbs (2.0 kg)2-valve traditional6.0 lbs (2.7 kg)3-valve coplanar4.7 lbs (2.1 kg)3-valve traditional6.0 lbs (2.7 kg)5-valve coplanar6.5 lbs (3.0 kg)Table 16. Rosemount 306 In-line ManifoldDescriptionWeightBlock-and-bleed1.1 lbs (0.5 kg)2-valve2.5 lbs (1.1 kg)Table 17. Rosemount 304 Conventional ManifoldDescriptionWeight2-valve traditional flange NPT5.0 lbs (2.3 kg)2-valve traditional flange flange5.5 lbs (2.5 kg)3-valve traditional flange NPT5.2 lbs (2.4 kg)3-valve traditional flange flange5.7 lbs (2.6 kg)3-valve wafer flange NPT4.0 lbs (1.8 kg)5-valve wafer flange NPT5.7 lbs (2.6 kg)5-valve traditional flange NPT5.7 lbs (2.6 kg)5-valve traditional flange flange5.7 lbs (2.6 kg)18EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsDimensional DrawingsRosemount 305 ManifoldFigure 7. Rosemount 305R 2-Valve Coplanar Style 28)4.30(109)max openA7.20(183)max openA. 1/2–14 NPT on manifold for process connection, 1/4–18 NPT for test/vent connectionNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).Figure 8. Rosemount 305R 3-Valve Coplanar Style 228)A5.00(127)max openB9.20(234)max openA. Drain/vent valveB. 1/2–14 NPT on manifold for process connections, 21/8-in. center-to-centerNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).EmersonProcess.com/Rosemount19
Rosemount ManifoldsNovember 2015Figure 9. Rosemount 305R 5-Valve Coplanar Style 28)5.00(127)max open10.60(269)max openAA. 1/2–14 NPT on manifold for process connections, 21/8-in. center-to-center, 1/4–18 NPT for test/vent connectionNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).Figure 10. Rosemount 305RT 2-Valve Traditional Style 41)3.75(95)max openB3.50(89)1.10(28)2.125(54)6.40(163)max openA. 1/2–14 NPT on optional process adapterB. 1/4–18 NPT on traditional manifold for process connection without the use of a process adapterNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).20EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsFigure 11. Rosemount 305RT 3-Valve Traditional Style (41)3.75(95)max open1.05(27)C1.10(28)3.50(89)6.40(163)max open2.125(54)8.90(226)max open2.70(69)max openA. Drain/vent valveC. 1/4–18 NPT on traditional manifold for process connections without the use of processB. 1/2–14 NPT on optional process adapter(1)adaptersNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).1.Adapters can be rotated to give adapter connection centers of 2.0 (51), 2.125 (54), or 2.25 (57).Figure 12. Rosemount 305RM 2-Valve Traditional Style 41)4.20(107)max openB4.13(105)1.10(28)C2.1256.50(54)(165)max openA. 1/2–14 NPT on optional process adapterC. 1/4–18 NPT vent connection1B. /4–18 NPT on traditional manifold for process connection without the use of a process adapterNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).EmersonProcess.com/Rosemount21
Rosemount ManifoldsNovember 2015Figure 13. Rosemount 305RM 3-Valve Traditional Style Manifold5.214.55 x openC1.10(28)4.13(105)1.05(27)6.50(165)max openA. Drain/vent valveB. 1/2–14 NPT on optional process adapter(1)2.125(54)9.02(230)max open2.50(63)max openC. 1/4–18 NPT on traditional manifold for process connections without the use of process adaptersD. 0.75 (19) clearance for cover removalNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).1.Adapters can be rotated to give adapter connection centers of 2.0 (51), 2.125 (54), or 2.25 (57).Figure 14. Rosemount 305RM 5-Valve Traditional Style Manifold5.214.20(107)4.55 (132)(116)7.70(196)A1.63(41)4.20(107)max openB2.60(66)max open4.13(105)1.10(28)6.50(165)max open2.125(54)9.02(230)max open2.50(63)max openA. 1/2–14 NPT on optional process adapter(1)B. 1/4–18 NPT on traditional manifold for process connections without the use of process adaptersNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).1.22Adapters can be rotated to give adapter connection centers of 2.0 (51), 2.125 (54), or 2.25 (57).EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsRosemount 306 ManifoldFigure 15. Rosemount 306R Pressure Style Manifold (3051S T Shown)(1)Block-and-bleed style2-valve )A3.75(96)CA. Bleed screwC. 1/2–14 NPT female NPT process connection (code BA)1B. /4-in. vent connection–pipe plug supplied with manifold, but not installed at factory (pipe plug supplied loose)Note: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).Figure 16. Traditional Manifold with Optional Brackets for 2-in. Pipe Mounting8.18(208)3.56(90)1.10(28)3.50(89)B3/B9/BC mounting 1)B1/B7/BA mounting ote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).1.Manifold valve orientation may vary with respect to transmitter mounting holes.EmersonProcess.com/Rosemount23
Rosemount ManifoldsNovember 2015Figure 17. Coplanar Manifold with Optional Bracket for 2-in. Pipe MountingOption code B4A7.68(195)4.90(125)6.25(159)3.54(90)A. 2-in. U-bolt for pipe mountingNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).Figure 18. VS/VC Heavy Duty Manifold Mounting Bracket2-in. pipe mountAPanel .88(149)B3.50(89)max open5.88(149)2.75(70)A. Drain/vent valveB. 2-in. pipeNote: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).24EmersonProcess.com/Rosemount
November 2015Rosemount ManifoldsRosemount 304 ManifoldFigure 19. Rosemount 304RT 2-Valve Flange X NPT Conventional ManifoldInstrument sideAB2.12(54)B3.75(95)5.78(147)max open1.33(29)3.50(89)max openCProcess sideA. 0.281 mounting holes (2)B. 1/4 NPT testC. 1/2 NPT process connection on 2.125 (54) centers (2)Note: Manifold handle assembly may vary slightly from image shown. All valve handle assemblies provide the same function and meet all stateddrawing dimensions.Dimensions are in inches (millimeters).Figure 20. Rosemount 304RT 2-Valve Flange X Fl
Rosemount 305 Integral Manifold, see page 6. Rosemount 306 In-line Manifold, see page 8. Rosemount 304 Conventional Manifold, see page 10. Transmitter/manifold assembly 1. Specify a completed Rosemount transmitter model number by referenci
Flow Manifolds Static Pressure Manifolds Liquid Level Manifolds Flow Manifolds Static Pressure Manifolds Liqu
BRUTE IImanifolds F 43 TITAN manifolds F 44-45 All manifold repair parts 46, 49-50 Series 41 manifolds F 47-48 R-134a auto manifolds 51, 58 Ammonia manifold 51, 58 Single gauge manifolds 51 BRUTE IImanifolds C 54 TITAN manifolds C 55-56 Series 41 manifolds C 57 1/4" original charging hoses 25 1/4" PLUS II Hoses, FlexFlow .
A11(12)(13) Assemble to Rosemount 305 Integral Manifold A12(12) Assemble to Rosemount 304 or AMF manifold with 316 SST traditional flange C11(12) Assemble to Rosemount 405C or 405P Primary Element D11(12) Assemble to Rosemount 1195 Integral Orifice and 305 Manifold EA2(12) Assemble to Rosemount 485 or 405A Annubar
Rosemount 3051S 305 A11 N/A 306 A11 N/A 304 A12 N/A Rosemount 3051/2051 305 N/A S5 306 N/A S5 304 N/A S6 Rosemount 2088 305 N/A N/A 306 N/A S5 304 N/A N/A Rosemount 4088 305 A11 N/A 306 A11 N/A 304 A12 N/A. Procedure. 1. Specify a completed Rosemount transmitter model number by referencing the applica
Rosemount 3051S 305 A11 N/A 306 A11 N/A 304 A12 N/A Rosemount 3051/2051 305 N/A S5 306 N/A S5 304 N/A S6 Rosemount 2088 305 N/A N/A 306 N/A S5 304 N/A N/A Rosemount 4088 305 A11 N/A 306 A11 N/A 304 A12 N/A. Procedure. 1. Specify a completed Rosemount transmitter model number by referencing the applica
A11(5) Assemble to Rosemount 305 Manifold Assemble to Rosemount 306 Manifold A12(5) Assemble to Rosemount 304 or AMF Manifold with SST Traditional Flange N/A B11(5)(6) Assemble to One Rosemount 1199 Remote Diaphragm Seal with SST transmitter flange Assemble to One Rosemount 1199 Remote Diaphragm
Rosemount 644 Smart Temperature Transmitters may be protected by one or more U.S. Patents pending. Other foreign patents pending. Rosemount 644 Hardware Revision . Rosemount 644 Head Transmitter. Rosemount 644. Rosemount 644. Reference Manual 00809-0100-4728, Rev JA. January 2004
Accounting terminology Financial statement preparation Financial statement relationships 1, 2 Classifying balance sheet 1, 2 Analysis accounts CHAPTER 5 THE ACCOUNTING CYCLE: REPORTING FINANCIAL RESULTS Topic Skills Learning Balancing the accounting equation 1, 2 OVERVIEW OF BRIEF EXERCISES, EXERCISES, PROBLEMS AND CRITICAL THINKING CASES Objectives Analysis Analysis Analysis, communication .
