INSPECTION REPORT - Chenggongyi

IND-F-INSP-PM-04-02Inspection Order No. :BOSS No:Page No. :Date of issue:IN-TJ-5802-14320TBA1 of 7Nov.26th, 2014INSPECTION REPORT(non-negotiable)- Description and Quantity ofRectangle Tube, SS 316 L Angle,SS316 meshCommodity:- Name & Address Of Buyer:AL-LAMAA PALACE TRAD EST.Add: exit-18 new sulai industrial area riyadh-saudi arabia- Name & Address Of Seller:JINBAOLAI STEEL TRADING CO.,LTDAdd: Room #A1115,Beichen Road &Longzhou Road Sqr.Beichen District,tianjin,CHINAHEBEI SHUOLONG METAL PPPRODUCTS COLTDAdd:Anping,Hengshui, Hebei,CHINA- Inspection Date & Place:Nov.25 26th, 2014 anping hebei and xiqing Tianjin , China- Contract No.:- Invoice (Packing List )No.Nr: CS0028-14 and Nr:CS0029-14 Nov .5,2014SL-20141105 date: Nov.5,2014 /10TF7806 date Nov 26,2014- Nature Of Inspection:ItemQuantity checkVisual quality Marking andPacking checkDimension checkwitness the gross weight checkWitness samplingCommentAcceptableSubject to client’s evaluationSubject to client’s evaluationAcceptableAcceptable- Inspector:Rock huang- Reviewed byKevin LiThis is to report that we, SGS-CSTC (Tianjin) Co., Ltd. at the request of AL-LAMAA PALACE TRAD EST.conducted the following inspection:DisclaimerThis document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/terms and conditions.htm. Attention isdrawn to the limitation of liability, indemnification and jurisdiction issues defined therein.Any other holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within thelimits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction fromexercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance ofthis document is unlawful and offenders may be prosecuted to the fullest extent of the law.SGS-CSTC Standards Technical Services(Tianjin) Co., Ltd.st,[V: 02 June. 1 2012]SGS Mansion, No. 41, The 5th Avenue, TEDA, Tianjin, China, 300457t: 86(0)22-65288000 f 86(0)22- 25293805 www.cn.sgs.comMember of the SGS Group (Société Générale de Surveillance)

IND-F-INSP-PM-04-02Instrument checklistDuring the inspection, the following instrument calibration status has been checked for inspection:MEASURING INSTRUMENT DESCRIPTIONCALIBRATIONCERTIFICATE NO.No.(Including measuring range and equipment No.)STATUS(OPTIONAL)1Steel QF-21)Effectively3EffectivelyVernier caliper（IND-TJ-KC-40）4electronic balanceEffectively14h00845scaleN/AN/ABefore weight check, SGS inspector required the manufacturer to provided the calibration certificate ofscale for review, and it was not provided, the manufacturer declared that the electronic scale was notcalibrated, so the value of weight check just for reference.Inspection Finding:1. Quantity check randomly: Reference documents: PO(Nr: CS0028-14 and Nr:CS0029-14 Nov .5,2014) Packing list (SL-20141105 date: Nov.5,2014 /10TF7806 date Nov 26,2014 ) Method of quantity check Quantity check by 100%. The details as below:ItemDescriptionReq. Quantity pcsAct. Quantity pcs1Wire mesh992Ss 316l angle10103tube30/Remark: The manufacturer declared that the tubes were not finished, so cannot inspection.Result: The result was acceptable except remark.2. Visual quality Marking and Packing check randomly: Reference documents: PO(Nr: CS0028-14 and Nr:CS0029-14 Nov .5,2014) Packing list (SL-20141105 date: Nov.5,2014 /10TF7806 date Nov 26,2014 ) Sample size: ANSI/ASQ, Z1.4-2008, s-4 TOTAL 4pcsDuring the inspection visual quality, marking and packing check was performed randomly by SGSinspector, all the cargos were nude ,no marking was found, no obvious defect was found, such as crack,deformation, broken, etcRemark: The manufacturer declared that the tubes were not finished, so cannot inspection.Result: The result was Subject to client s evaluation except remark.3. Dimension check randomly: Reference documents: PO(Nr: CS0028-14 and Nr:CS0029-14 Nov .5,2014) Packing list (SL-20141105 date: Nov.5,2014 /10TF7806 date Nov 26,2014 ) Sample size: ANSI/ASQ, Z1.4-2008, s-4 TOTAL 4pcsSGS inspector performed dimension check on the inspection site. Total 4rolls were selectedrandomly for dimension check, the details as below table:Inspection Order No.: IN-TJ-5802-14320th[V: 02 Jun.06 , 2012]Page No.: 2 of 8

IND-F-INSP-PM-04-02unit: mmITEMSampleWire mesh2MSWWDLREQ. VALUE60*6024502.810000ACT. VALUE59.15 60.053004 3005WWREQ. VALUE150150ACT. VALUE151.5 153.5151.5 153.52.77 2.95WT10045 10050L1230002SS 316l angle11.65 11.723003 3005.5Remark: The manufacturer declared that the tubes were not finished, so cannot inspection.Result: The actual measured value for clients reference, due to no tolerance was provide to SGSinspector. So the result Subject to client s evaluation except remark.4. witness the gross weight check: Reference documents: PO(Nr: CS0028-14 and Nr:CS0029-14 Nov .5,2014) Packing list (SL-20141105 date: Nov.5,2014 /10TF7806 date Nov 26,2014 ) Sample size: witness the gross weight check by 100%Total 9 rolls of wire meshes were selected randomly for net weight check and under SGS inspector’switness, before weight check, SGS inspector required the manufacturer to provide the calibrationcertificate of electronic scale and calibration certificate was Acceptable. Details as follow:ItemDescriptionReq. Net weightAct. Net weight1Wire mesh45.15/2Wire mesh44.7/3Wire mesh44.45/4Wire mesh44.45/5Wire mesh44.25/6Wire mesh44.9/7Wire mesh44.9/8Wire mesh44.7/9Wire mesh44.6/total402.1400kgTotal 10 pcs of angles were selected randomly for net weight check and under SGS inspector’s witness,before weight check, SGS inspector required the manufacturer to provide the calibration certificate ofelectronic scale and the manufacturer declared that the electronic scale was not calibrated, so the valueof weight check just for reference. Details as follow:ItemDescriptionReq. Net weightAct. Net weight1angles865865Remark: The manufacturer declared that the tubes were not finished, so cannot inspection.Result: The result Subject to client s evaluation except remark.Inspection Order No.: IN-TJ-5802-14320th[V: 02 Jun.06 , 2012]Page No.: 3 of 8

IND-F-INSP-PM-04-025. Witness sampling: Reference documents: PO(Nr: CS0028-14 and Nr:CS0029-14 Nov .5,2014) Packing list (SL-20141105 date: Nov.5,2014 /10TF7806 date Nov 26,2014 ) Sample size: according to requirements of client, 2pcs/cargoes, total 4pcsDuring the inspection, taken total 4 pcs of samples were taken from steel coils by manufacturer underSGS inspector witness, the cutting was performed by manual cutting, position at the end of cargoes, aftersampling, SGS inspector pasted the label marks on each piece of samples, and then the samples weresent to Tianjin SGS by manufacturer. Details as follow:samplingsamplingSGS label on cargosExpress No. 471 088 332 547Inspection Order No.: IN-TJ-5802-14320th[V: 02 Jun.06 , 2012]Page No.: 4 of 8

IND-F-INSP-PM-04-02samplingsamplingSGS label on cargosExpress No. 022 942 958 804Remark: The manufacturer declared that the tubes were not finished, so cannot inspection.Result: The result was acceptable except remark.THIS REPORT ONLY REFLECTED OUR ACTUAL FINDINGS. THE INSPECTION WAS DONE TO THEBEST OF OUR KNOWLEDGE AND ABILITY AND WITH DUE CARE. THE FINDINGS ARE VALID ASFOR TIME AND PLACE OF INSPECTION.Attachment: Photos during inspectionInspection Order No.: IN-TJ-5802-14320th[V: 02 Jun.06 , 2012]Page No.: 5 of 8

IND-F-INSP-PM-04-02Visual checkVisual checkDimension checkDimension CheckDimension CheckDimension CheckInspection Order No.: IN-TJ-5802-14320th[V: 02 Jun.06 , 2012]Page No.: 6 of 8

IND-F-INSP-PM-04-02Dimension CheckDimension Checkweight checkweight checkweight checkweight checkInspection Order No.: IN-TJ-5802-14320th[V: 02 Jun.06 , 2012]Page No.: 7 of 8

IND-F-INSP-PM-04-02weight checkweight checkQuantity checkQuantity checkEnd of reportInspection Order No.: IN-TJ-5802-14320th[V: 02 Jun.06 , 2012]Page No.: 8 of 8

Nov 20, 2017 · During the inspection, taken total 4 pcs of samples were taken from steel coils by manufacturer under SGS inspector witness, the cutting was performed by manual cutting, position at the end of cargoes, after sampling, SGS inspector pasted the label marks on each piece of samples, and then the samples were sent to Tianjin SGS by manufacturer.