ADJUSTABLE BED OWNER'S MANUAL
ADJUSTABLE BEDOWNER'S MANUALActual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual.
table of contentsSafety Precautions and Usage Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Base and Remote Overview / Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9Installation Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13Remote Control - Preset Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Remote Control Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Syncing Two Bases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Bluetooth Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Power Down Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
safety precautions and usage statementsAttention: Important Safety DisclaimersRead all instructions before using your adjustable base. Save these instructions.WARNINGAlways unplug the base from the electrical outlet before servicing anypart of the base. To reduce risk of electric shock, unplug the base beforecleaning. To safely disconnect, ensure the base is in a flat position withall motors off, and unplug from power source.SAFETY:TO REDUCE THE RISK OF SHOCK, BURNS, FIRE OR INJURY:For optimal safety and operation, plug bed base into a surge protector (notincluded). The bed base should only be plugged directly into a wall outlet orsurge protector (strongly recommended). Always unplug the base from theelectrical outlet before servicing any part of the base. To reduce risk of electricshock, unplug the base before cleaning. To safely disconnect, ensure the baseis in a flat position with all motors off, and unplug from power source. Keepthe power cord away from heated surfaces. Never operate the base when theair openings are blocked. Keep air openings free of lint, hair and the like. Donot drop or insert any object into any opening. Discontinue use of the bedbase and contact a qualified service center if it has a damaged cord or plug, itis not working properly, or it has been dropped into water. Only use this bedbase for its intended use as described in this manual. Do not use accessories/attachments that are not recommended by the manufacturer. Close supervisionis required when the bed base is used by or near children, convalescents,disabled persons or pets. Improper connection of the equipment can result inthe risk of electrical shock, electrical fire or faulty operation of this bed base. Ifthe plug does not fit your outlet, contact a qualified electrician to install a suitableoutlet. Unauthorized modification or failure to use a wall outlet or surge protectorcould void the electrical portion of your warranty.WARNING Keep bed in a flat position when not in use.Stay clear of moving parts while in motion.Before adjusting, make sure children and pets are clear ofmoving parts and are not under bed base.Do not allow children to operate bed base without adultsupervisionPETS AND CHILDREN:Immediately dispose of all packing materials as it may pose a smothering riskto small children and pets. To avoid injury, it is not advised to allow children andsmall pets to play on or under the bed. Children should not operate the bedbase without adult supervision.PACEMAKERS:Some products contain Neodymium MAGNETS which may interfere with devicessuch as pacemakers, ICD’s and any other device sensitive to magnetic fields.It is STRONGLY recommended that owners of such medical devices consulttheir physician prior to using products that contain Neodymium MAGNETS. It isalso possible that some pacemakers may falsely interpret the optional massagefeature vibrations as movement/exercise. This is a common occurrence with anyproduct that creates a vibrating movement and may not affect the pacemaker.Please consult your physician before using the massage feature.1
safety precautions and usage statementsWARNINGFor optimal safety and operation, plug bed base into a surge protector(not included). The bed base should only be plugged directly into agrounded wall outlet or surge protector (strongly recommended). Improperconnection of the equipment can result in the risk of electrical shock,electrical fire or faulty operation of this bed base. If the plug does not fityour outlet, contact a qualified Electrician to install a suitable outlet.AdjustableBed ToleranceMATERIALSErgomotion adjustable bases are constructed from various materials includingAll Ergomotionadjustablefoundations,dependingon makeTension,and model, arepressuredesigned and manufacturedto perform andwoods,metals,plasticsandfabrics.or movementapplied tofunction within designated quality control parameters. Bases are subject to meticulous and rigorous inspections duringquality controlprocess to orensurebases will operatewithin thesestandardsuseduringmaynormal reateuse.an audible sound.Normal operating use is defined as the following:-Adjustable foundation is to be operated with a mattress and load. Testing procedures require lifetime cycleMASSAGEOPERATIONANDtests withup to 120kg distributedload.LOCATION ENVIRONMENT(α )IN-HOME USE AND HOSPITAL STANDARDS:Ergomotion adjustable bed bases are designed solely for in-home use. Thisbase was not designed as a hospital bed and is not designed to meet hospitalstandards. Do not use this base with TENT TYPE oxygen therapy equipment ornear explosive gases.ACOUSTICSLIFTING/LOWERING MECHANISMSThe lift/lower feature will emit a minimal humming sound during operation. Thisis normal. During operation, the lift arm wheels make contact with the platformsupport of the base. This contact may result in metal on metal or metal on plasticcontact. This applies slight tension on the moving components and resonanceis reduced to a minimum level. If excessive noise or vibration is experienced,reverse the movement action (up or down) of the base with the remote control.This should realign the base’s activating mechanisms to the proper operationalposition. In normal base operation, the wheels which allow the bed to maintainits distance from the wall, will make contact with the steel platform supports ofthe base creating a contact noise. When entering, exiting or shifting weight onthe base, this contact noise may be audible as the wheels make contact. This isnormal.2(β )The massage feature will emit a tone during operation. This is normal. As themassage intensity level is increased, the tone will intensify. The volume of this toneThe angle (designatedin figurebetween the backsection and the flatForsectionexample,for various configurationsof theis when demonstratedmattress support platform shall be 3 , which translates to a tolerance of up to 1 ½”.in oversomeof theangle (designated “β” in figure 1) between the flat section and foot section for various configurations of the mattresssupport platform shall be 3 , which translates to a tolerance of up to ¾”.massagenoise. However, when installed in a home setting with wooden floors,When operating a "paired" split base setup there may be a time latency up to 1.5 seconds between each bases articulation.carpetedor not, the massage volume will be more noticeable. To minimize thisAny adjustable foundation deemed to be within these allocated tolerances is considered to have met the manufacturer’sresonance,place a piece of carpet, or rubber caster cups, under each leg or casterquality control standards.of thebase.It is possible to experience vibration or noise from the exterior bedBlake PettitQualityAssurance Managerframe,headboardbrackets, headboards or footboards if mounting bolts are notPh 805-979-3875firmlytightened.Fx 805-979-9399www.ergomotion.comLevels 1-3 massage intensity represent the amount of electrical power deliveredto the massage transducer. Level 3 provides the max power delivered to theErgomotion Inc. ph 1-888-550-3746 fx 805-979-9399 www.ergomotion.comtransducers. Depending on the mattress material, thickness, and positioning ofthe user, the feeling of vibrations will differ. We encourage the user to find themassage intensity setting that suits them best.
safety precautions and usage statementsTOLERANCEAll Ergomotion adjustable foundations, depending on make and model, aredesigned and manufactured to perform and function within designated qualitycontrol parameters. Bases are subject to meticulous and rigorous inspectionsduring the quality control process to ensure bases will operate within thesestandards during normal operating use. Normal operating use is defined as thefollowing: Adjustable foundation is to be operated with a mattress and load.Testing procedures require lifetime cycle tests with up to 120kg distributed load.The angle (designated “a” in figure 1) between the back section and the flatsection for various configurations of the mattress support platform shall be 3 ,which translates to a tolerance of up to 1 ½”.The angle (designated “b” in figure 1) between the flat section and foot sectionfor various configurations of the mattress support platform shall be 3 , whichtranslates to a tolerance of up to ¾”.Any adjustable foundation deemed to be within these allocated tolerances isconsidered to have met the manufacturer’s quality control standards.THAT “NEW PRODUCT” SMELL:Some people notice a slight odor to their new adjustable base—this can comefrom our material manufacturing process. This smell is normal and usuallydisappears before the product reaches you. Sometimes, however, this smell maystill be noticeable. It usually disappears after a few weeks, providing adequateventilation of the product and the environment.BREAK IN PERIOD:You can speed up the break-in period by simply spending time in the adjustablebed through activities such as reading, watching TV or playing with the kids orgrandkids. The extra movement will help the adjustable base respond to weightand temperature changes. Some of the materials in our adjustable bases suchas the woods, metals and plastics used in the platform, frame and componentsare sensitive to moisture content and temperature and may make sounds incolder environments.PAIRED OPERATION:When operating a “paired” split base setup there may be a time latency up to 1.5seconds between each bases articulation.WEAR AND TEAR:Wear and tear is damage that naturally and inevitably occurs as a result ofnormal use or aging.FABRIC CARE:To prolong the life of your fabric, protect from direct sunlight whenever possible.For spot cleaning, wipe area with a light damp sponge or vacuum with a soft brushattachment to remove particles. Keep at a minimum of 30cm (12 inches) awayfrom direct heat sources. For a deeper cleaning, blot liquid spills with a clean drycloth. Wipe with a clean cloth dampened with warm water. Do not wet excessively.A soft bristle brush may be used to remove ingrained soil. Avoid scratching bygentle brushing. Wipe with a clean cloth dampened with warm water to removeresidues. Dry in shade away from direct heat. If persistent marks remain visibleafter cleaning, seek professional advice.PRODUCT RATINGS:The lift motors are not designed to operate continuously for more than[2] minutes in an [18] minute time period or approximately 10% duty cycle.Attempting to circumvent or exceed this rating will shorten the life expectancy ofthe product and may void the warranty. The massage motors are not designedto operate continuously for more than 30 minutes at a time. Please allow themassaging system to rest for 30 minutes after automatic massage shut off beforerestarting.WEIGHT LIMITS:This product is not rated to support weights in excess of 650 pounds inclusive3
safety precautions and usage statementsof the mattress and bedding. The base will structurally support this weight,provided it is evenly distributed across the bed base. The adjustable base isnot designed to support or lift this amount in the head or foot sections alone.Exceeding this weight restriction could damage the bed and/or cause injury andwill void the warranty.IMPORTANT DO’S AND DON’TS:DO: Plug your adjustable base into a power surge protector. Evenly distribute weight when sleeping in a split setup. Uneven distribution ofweight can cause the base to raise unevenly. Call Customer Service for any technical issues. Do not try to force the basedown, this can damage the motors or frame. Use mild soap and water to clean your adjustable base if staining occurs. Keep in mind that adjustable bases are recommended to be used withadjustable friendly mattresses Lower to the flat (horizontal) position after use and in between presets. Register your warranty as soon as your adjustable base has been delivered.DON’T: Sit on corners/edges of base, this may warp the frame, struts or foam. Stand or jump on the adjustable base at any time, this can damage theframe and motors. Drag the base to move it. Dragging the base could damage the frame. Enter and exit the adjustable base with the head and/or foot in thearticulated position. Enter or exit your adjustable in the flat (horizontal)position. Tinker with or modify base. This will void the warranty. Press down on the head or foot while actuated can damage frame andmotors.4FCC Compliance:This device complies with part 15 of the FCC Rules. Operationis subject to the following two conditions: (1) This devicemay not cause harmful interference, and (2) this device mustaccept any interference received, including interference thatmay cause undesired operation.To comply with the FCC RF exposure requirements, nochange to the antenna or the device is permitted. Any changeto the antenna or the device could result in the deviceexceeding the RF exposure requirement and void user’s rightto operate the device.Radio Frequency: 2.4 GHzSAVE THESE INSTRUCTIONS.
parts listBefore discarding the packing materials, ensure all the parts are accounted for.All electronics and components that need to be installed arelocated in boxes under the base or attached to the frame.(Remote varies based on model.)A)Wireless Remote Control and (3) AAA BatteriesB)Mattress Retainer Bar (2) *C)Power CordD)Power SupplyE)Power Down Box (9 volt batteries not included)F)Sync-Cord ‡G)Bluetooth Dongle Misc. Parts (not included):Surge Protector9 Volt BatteriesA)A)A)B)*D)C)E)F)‡G) *These items are attached to the base for shipping purposes.Carefully remove from base and set aside.‡One included with each half of a split king adjustable base Only included with the Deluxe adjustable base5
standard adjustable bed and remote overviewFlat preset buttonLifts and lowershead portion of thebasePreset Position #1Preset Position #2ZERO G presetbuttonControl BoxHead Motor6Lifts and lowersfoot portion of thebaseFoot Motor
quick reference guideNot to scale. For illustration purposes only. Read all instructions before beginning installation.CONTROL BOX OVERVIEWELECTRONICS OVERVIEWHead MotorFoot MotorPower CordPowerLED LightPower DownBox PortInput CordConnectionReset/PairingButtonPairingLED LightTo remove control box, releasemetal clip and unplug cords.Control BoxPower SupplyInputPower CordWirelessRemotePower DownBoxIf installing a split unit, see page 16.7
deluxe adjustable bed and remote overviewHead MassageMotorsMassgae AmpAnti-SnoreUSB PortHead MassageMassage All On/OffFoot MassageBluetoothDeviceMemory PresetZero G PresetControl BoxFlat Preset PositionLifts and Lowers HeadLifts and lowers FootPower DownBoxPreset Position #1Preset Position #2Foot MassageMotorsFoot MotorHead Motor8Preset Position #3
quick reference guideNot to scale. For illustration purposes only. Read all instructions before beginning installation.CONTROL BOX OVERVIEWELECTRONICS OVERVIEWMassage AmpMassage MotorPortsPower CordControl BoxPowerLED LightPower DownBox PortInput CordConnectionReset/PairingButtonPairingLED LightPower SupplyInput PowerCordTo remove control box, releasemetal clip and unplug cords.SplitterHead MotorUSB PortsUSB ChargerFoot MotorBluetoothFor Bluetooth setup instructions, see page 17.Power Down BoxIf installing a split unit, see page 16.9
installation guideAlways use two people when setting up the base.STEP 1STEP 5Place the bed base box in a desired location with the top of thebox facing up.Remove the binding straps and packing materials, making sure notto puncture the box with any sharp objects.STEP 2Remove the bed base from the box keeping the bottom of thebase facing upwards.STEP 3To sync two bases see detailed installationinstructions on page 16.Locate the power down box and set it aside. Be sure that it isaccessible after the base is set up.STEP 4Uncoil input Power Cord (connected toControl Box’s power port) and plug intoPower Supply.10Uncoil the Power Cord and connect to thePower Supply. Place Power Supply on theground and extend from the base. Ensurethat the Power Supply and all attachedcords are directed toward the desired surgeprotector.STEP 6Carefully flip the base over. Important: Two people are required tomove the bed base. Do not drag across the floor. Do not rest frameon its side.STEP 7Plug the power cord into a power source.A surge protector is recommended.
installation guideSTEP 8Quickly test remote functions to verify proper setup beforeplacing mattress on base. Return the base to a flat position beforeplacing the mattress on top.STEP 9Install mattress retainer bars by inserting both ends of mattressretainers bar into holes on the platform and laying the barsdown with curved side facing up.Setup is now complete! Test all functions on remote.*For bluetooth setup on deluxe base, see page 17.11
remote controlRemote Control arrives paired to the adjustable base.Three (3) AAA batteries are required to operate the remote.MASSAGE FEATUREAnti-SnoreHead MassageMassage All On/OffThe MASSAGE-ALL-ON/OFFbutton turns on the head andfoot massage. Cycle through3 levels of intensity, then allmassage will turn off.Foot MassageMemory PresetZero G PresetThe HEAD - button willturn on the head massage.Cycle through 3 massageintensities.Flat Preset PositionLifts and Lowers HeadLifts and lowers FootThe FOOT - button willturn on the foot massage.Cycle through 3 massageintensities.Preset Position #1Preset Position #2Preset Position #3ZZZ12The Anti-Snore button willlift the head panel slightly toreduce snoring.
remote controlADJUSTONE TOUCH BUTTONSOne touch ZERO-G presetposition. Zero-G adjusts yourlegs to a higher level thanyour heart helping to relievepressure off the lower backand promote circulation.The HEAD arrows lift andlower the head section of thebase.The FOOT arrows lift andlower the foot section of thebase.One touch FLAT presetposition.Preset Position #1.Preset Position #2.Preset Position #3.MMemory Preset Position.13
remote control - preset programmingThe programmable feature allows you to save custom positions.Please read all the instructions below before setting your custom presets on the remote.STEP 1 Articulate the head and foot to your desired position.STEP 2Press and hold one of the preset buttons[I and II] for 7 seconds.Position is now saved.NOTE: To restore the preset buttons back to their original factorysettings, hold FLAT and ZERO-G simultaneously for at least 10seconds. The original presets will be restored.To adjust the saved position, repeat steps 1 and 2 and the new position will be stored.14
remote control pairingRemote PairingThe original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event that theremote is not paired with the base, follow the steps below.*STEP 4STEP 1Locate the Power Down Box andpress the button TWICE. A lighton the Battery Back Up Box willilluminate.Move slider switch in backof remote to control bedA (slide to far left), bed B(slide to far right) or bothbeds A & B simultaneously(slide switch to middle).POWER DOWNButtonSTEP 2Remove the back cover of the remote,press and hold down the PAIR button. ThePAIR button will illuminate blue and startflashing. When the PAIR button stopsflashing, the illuminated light on the BatteryBackup Box will go out. Release the PAIRbutton. The remote is now paired to theadjustable base.PAIRButtonSTEP 3After remote is paired, press the following buttons at the sametime: Head Up, Head Down, Foot Up and Foot Down.The Power Down Box will blink 4 times in succession to confirmsuccessful pairing.Base paired in steps 1 and 2 is base B. Secondary base is nowbed A.ABABBase ABase BBase ABase B*ALTERNATE REMOTE PAIRING PROCESS!Locate the Control Box (see base overview and quick referenceguide for corresponding base) and press the Reset/Pairing buttontwice. A pairing LED light will illuminate green on the Control Box.On the back of the remote, press and hold the PAIR button. ThePAIR button will illuminate blue and start flashing. When the PAIRbutton stops flashing, the green LED light on the Control Box will goout. Release the PAIR button. The remote isnow paired to theadjustable base.Reset/PairingButtonPairingLED Light15
syncing two bases (optional)A Sync Cord is included with the base. Not available on Queen bases.The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases.STEP 1Standard base:Unplug bases from power source.STEP 2Connect the male end of the sync cord to each Power Down Box.Control Box 1Control Box 2Power DownBox 1STEP 3Check to ensure all cords are securely attached.Power DownBox 2Sync CordPlug bases back into the power source.Deluxe base:7RESETMULIT FUNCTION67E DPAIRING LRESET6USBPortsPower DownBox 2Power DownBox 1Sync CordBluetoothDevice 116Control Box 2Control Box 1PAIRING LEDBoth remotes will now operate both bases simultaneously.If bases become mismatched, pressing the FLAT button willre-sync the mechanical positions.USBPortsMULIT FUNCTIONPERFORMANCE NOTESBluetoothDevice 2
bluetooth setup on deluxe baseTo operate the deluxe base from a smart device, the “Ergomotion 4.0” application must be downloaded to the desiredsmart device from the App Store (Apple) or Google Play Store(Android). **Bluetooth app is only compatible with the Element 3STEP 1STEP 5Select desired base. Tap back arrow to return to settings and selectRemote to return to remote control screen.Plug the bed into power supply.STEP 2*See page 12-13 for remote instructions.Select the Settings Icon from themain menu.STEP 3Turn on the Bluetooth autoconnect and select your remotestyle (M4).NOTES: If operating multiple bases: the Unique ID number will be listed on thesticker located on the adapter Press and hold RESET for 5 seconds to reset customized presets back tofactory default settings.STEP 4Tap Select device. To disconnect: Turn off the Bluetooth function on your device or select“Forget this Device” from your Bluetooth settings menu.M4 For assistance establishing a Bluetooth connection please refer to yourdevice’s owners manual or contact the manufacturer directly.For assistance setting up a Bluetooth connection, refer to your smartdevice's owners manual or contact the manufacturer directly.17
power down boxStore the battery box in a convenient location for emergency use.Two (2) 9 Volt batteries are required to operate the power down feature and are NOT included.OVERVIEWFor emergency use only, in case of a power outage.In the event that the base is stuck in an articulated position during a power outage,the Power Down Box will return the base to a FLAT position. Batteries are not to beused for normal operation of the base.STEP 1Install the 9 Volt batteries into the provided Power Down box.Do not mix brand name batteries.STEP 2Press the button on thePower Down Box to lowerthe base to FLAT position.Control BoxPower DownBox18
troubleshooting Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing themovement of the base. Check to ensure the green LED light is illuminated on the control box. If there is no light, verify that the input and power cords areproperly connected. Unplug the base for 1 hour to reset the electronic components. Plug bed base into a different electrical outlet, or test current outlet with another working appliance (a grounded, electrical surgeprotector is recommended). Remove and replace full batteries in the remote control and re-pair the remote to the base (see page 15).If issue is not resolved by following the instructions above, locate serial number on warranty card or back of remote and call19
Room&Board Contact mSerial Number:V001 R09
are sensitive to moisture content and temperature and may make sounds in colder environments. PAIRED OPERATION: When operating a “paired” split base setup there may be a time latency up to 1.5 seconds between each bases articulation. WEAR AND TEAR: Wear and tear is damage that naturally
12 51-87 Kits for Ford Flareside 14 48-85 Kits for Dodge Stepside 15 Bed Parts Installation BED FLOOR 16 Bed Wood O ak/Pine 19 Specialty Bed Wood 21 Exotic Bed W ood 22 Standard Bed Strips 25 Angle Strips 28 Bed Bolt Kits 31 "No Bolts" Bed Parts 36 Aluminum Bump and Flat Bed Strips BED PARTS 42 Front Bed Panels 44 Cross Sills/Reinforcement Strips
Flat 1 Ground 4-bed 197 2,120 Flat 2 Ground 3-bed 161 1,733 Flat 3 1st 1-bed 45 484 Flat 4 1st 1-bed 50 538 Flat 5 1st 1-bed 56 603 Flat 6 1st 1-bed 50 538 Flat 7 2nd 1-bed 51 549 Flat 8 2nd 1 bed 50 538 Flat 9 2nd 1-bed 56 603 Flat 10 2nd 1-bed 50 538 Total 766 8,245 Scheme ref: P2017/2080/PRA Net Saleable Areas: UNIT FLOOR BEDS NSA SQ. M. NSA .
The time-tested Murphy bed mechanism with attractive hide-away bi-fold pocket doors that collapse into the bed cabinet sides. Presidential indeed, with ample storage for books or collectibles. The bookcase doors effortlessly glide open on sturdy tracks. style murphy bed murphy bed murphy bed
Owner’s Assembly and Operating Manual 15005LP, 15004P, 15003P 15005LP Full Electric, Low Bed This manual must be given to the Owner/User of this bed and should be read carefully before putting this product into use. Keep manual in an accessible location for future reference. 15004P Semi-Electric Bed, Crank Hi/Lo 15003P Manual Bed, 3 Crank
Mitsubishi Diamana S 60 Regular 60 Mid Mid Stiff 61 Mid Mid DRIVER SPECS STOCK GRAPHITE SHAFT Loft Length Lie Left-hand 9 (Adjustable) 45.5" Adjustable Yes 10.5 (Adjustable) 45.5" Adjustable Yes 12 (Adjustable) 45.5" Adjustable Yes Model Flex Weight (grams) Torque Kick Point Fujiku
Once in bed, does your child have difficulty staying in bed or remaining still in bed when instructed to do so? . TV or music turned off after a few hours) (D) Bed What type of bed does the child sleep in (e.g., bunk bed, bed with rails etc ) What is the mattress quality? (e.g., could it cause discomfort?) (E) Other Is there anything else .
1.800.975.8451 Shevlin Murphy Bed PART A: Assembling Wall Bed Step 1: Remove Wall Bed from packaging (package includes 6 bed pieces). Retrieve 2 blue-green Foam Pieces from Side Panel packaging to use in a later step. Determine where you want to position Wall Bed. Place Head of Bed 18" from wall. Lay out other pieces as shown below. e n d l l d d
MDR107003E (GPI132) Revised: 10/31/11 1 The Medline Home Care Basic Bed Owner’s Assembly & Operating Manual Full-Electric Bed Model MDR107003E Semi-Electric Bed Model MDR107002E DEALER: This manual must accompany this bed upon purchase and be supplied to the user. USER: Please read this manual completely for warnings, proper assembly, maintenance,
