ALCATEL-LUCENT 9500 MICROWAVE PACKET RADIO

ALCATEL-LUCENT 9500MICROWAVE PACKET RADIORELEASE 3 ANSIThe Alcatel-Lucent 9500 Microwave Packet Radio (MPR) addresses all microwave applicationswith a single product family for all traffic (TDM/IP/hybrid) types. Both public and private serviceproviders now have a microwave platform that adds exceptional functionality to their networks.The Alcatel-Lucent 9500 MPR handles traffic by packets natively, yet still fully supports TDMcircuits, providing a means to seamlessly migrate to an all-IP infrastructure.The Alcatel-Lucent 9500 MPR offers thelowest total cost of ownership (TCO) byreducing both fixed capital expendituresand recurring operational expenses.Microwave Service Switch-8 (MSS-8)FEATURES Intelligent nodal IDU that supportsup to 12 RF transceivers in hybridor packet modeMicrowave Service Switch-4 (MSS-4) Hitless switching service-drivenadaptive modulation Multiservice aggregator with embeddedCircuit Emulation Service (CES) (MEF 8)capabilities for Carrier Ethernet transport Millimeter wave supportMicrowave Service Switch-1c (MSS-1c) Multiservice switching capacity greaterthan 16 Gb/s, and up to 48 Gb/s withEAS cards XPIC upgradeable for very high capacity Aggregation of multiple accesstechnologies over Ethernet convergencelayer, removing the need for newexternal equipment Protects operators’ investments andenables backhaul networks for smoothmigration from TDM to IP Operates in hybrid (Ethernet/PDH)or packet mode with the samehardware items Addresses all microwave applicationswith common hardware Backwards compatibility with existinghybrid ODU Guarantees TDM deterministic behaviorfor packet transport No performance degradationcomparable to native TDM Radio throughput greater than 4 Gb/sand termination of up to 192 x DS1 Guarantees high-priority traffictransport even in congested nodes Ethernet OAM IEEE 802.1ag Support of Synchronous Ethernet(SyncE) SSM and IEEE 1588v2 Support of LAG Radio link (NNI) Ethernet user interfaces (UNI)Multipurpose Outdoor Unit (ODU) Reduces OPEX Multi-service packet ring ITU-T G.8032 Support of DS3Microwave Packet Transport (MPT-HL)BENEFITS Simplified deployment Fast pre-provisioning Quick setup and network planning Drastically reduces footprint and rackpower dissipation Highest nodal capability with smallestfootprint

Improves scalability and availability End-to-end service-aware manage mentprovided by the Alcatel-Lucent 5620Service Aware Manager (SAM) for theAlcatel-Lucent IP/MPLS Service Routerportfolio and the Alcatel-Lucent 1340Integrated Network Controller (INC),for the Alcatel-Lucent Packet OpticalTransport portfolio Enhanced performance and reliability withbuilt-in test functionalities Embedded synchronization distribution(even in full Ethernet infrastructure) Nodal microwave configuration with asingle packet matrix switching Full redundancy with no single point offailure, including Ethernet matrix switchTECHNICAL SPECIFICATIONSApplications Backhaul and backbone transport formobile service providers Interconnection of private land mobileradios for public safety and industry Wide area network (WAN) connectivityfor enterprises, Internet service providers(ISPs) and carriers Control and switching module 4 x 10/100/1000 BaseT 2 x Small Form Factor Pluggable (SFP) 8 x Ethernet access cardStandards compliance EMC: EN 55022 Class B, EN 301 489-1/EN301 489-4 Safety: EN 60950-1 4 x 10/100/1000 BaseT Ecological: ECMA TR/70 4 x SFP Temperature 2 x DS1 SFP IDU: -40 C to 65 C (-40 F to 149 F) ODU: -33 C to 55 C (-27 F to 131 F)Synchronization MPT-HL: -5 C to 55 C (23 F to 131 F) Any synchronization solution in hybridand packet mode NEBS Level 3 Clock distribution options Telcordia GR-1089 Telcordia GR-63 DS1 IEEE 802.1p/Q VLAN tagging External reference sync-in/sync-out(2 MHz, 5 MHz, 10 MHz) IEEE 802.3 10 BaseT Synchronous Ethernet (Sync E) SSMG.8264 IEEE 802.3x Flow Control Built-in Stratum 3 clock IEEE 1588v2 Line clock recovery ACR, DCRDimensionsMPT-HL (2.5 RU) IEEE 802.3u 100 BaseTX IEEE 802.3z 1000 BaseSX/LX IEEE 802.1d Bridging IEEE 802.1ad link aggregation IEEE 802.1ag Ethernet OAM 1000 BaseT per 802.3ab MEF 9 MEF 14 Weight: 1 1 and 2 0: 12.7 kg (28 lb) 1 0: 8.85 kg (19.5 lb)Configuration optionsIDU (rack, desk or wall-mount) Radio terminal MSS-8 (2 RU) Radio repeater MSS-4 (1 RU) Multidirectional radio node MSS-1c (height: 1 RU, width: 1/2 RU) Aggregation shelf (no radio frequency [RF]) Weight: Fully equipped: 6 kg (13.2 lb)Radio-to-MSS connections ODU: Up to 12 NSB or 6 MHSB MPT-HL: Up to 12 NSB or 6 HSB Basic configuration: 2.5 kg (5.5 lb)ODU Weight: 5 kg (11 lb) average Or a combination of the aboveOperating frequencies ODU: Lower and upper 6 GHz, 7/8 GHz,11 GHz, 15 GHz, 18 GHz and 23 GHz (referto Tables 3, 4, 5 and 6 for exact values) MPT-HL: 5.8 GHz, lower and upper 6 GHz,7/8 GHz and 10/11 GHz (refer to Table 1and Table 2 for exact values)Radio frequency transceiver Synthesized sourceNetwork and element management Integrated network management inWindows environment Embedded Web browser for NEsupervision Software-based configuration by PCPower supply Intuitive supervision systemsMSS SNMP agent with TCP/IP reroutingcapability Standard: -48 V DC to -60 V DC Optional: -24 V DC to -60 V DC Optional: 24 V DCMPT-HL 24V DC to 60 V DCServices Network design and planning Hotline Interoperable with all Alcatel-Lucentwireless microwave and transmissionequipment Fully compatible with the Alcatel-LucentTransmission System Manager (TSM) 8000,Alcatel-Lucent 1340 INC and AlcatelLucent 5620 SAMTraffic management and QoS Express repair and return, swap andrepair, and spare-parts management Marking based on: 32 x DS1 each On-site visits, urgent interventions,technical assistance Layer 3 (DiffServ) DS3 access card Training from theory to installationUser interfaces100% front access for all interfaces DS1 access card 2 x DS3 each Alcatel-Lucent University Customer premises Bundled services during warranty periodand warranty extensionsAlcatel-Lucent 9500 MPR Release 3 ANSIALCATEL-LUCENT DATA SHEET2 Layer 2 (802.1p)

Table 1-1. Mpt-hl (indoor) with static modulationMPT-HL (INDOOR) WITH STATIC MODULATIONRF BANDSTANDARD DU LATION(QAM)LAYER2 0-6 BER)(dBm)SYSTEMGAIN3(dB)5.8 0-67.597.5MPT-HL30256160.230.0-70.5100.5Lower6 GHzstandardpowerLower6 GHzhigh powerUpper6 GHzstandardpowerUpper6 GHzhigh power252.4252.4160, 340160, 340Notes:Not all profiles may be available in current software release.Not all frequencies may be currently available.1Transmit power is measured at the output of the power amplifier.2Typical, as measured at the input to the radio receiver.3Typical, as measured from transmitter to receiver.These specifications are subject to change without notice.Alcatel-Lucent 9500 MPR Release 3 ANSIALCATEL-LUCENT DATA SHEET3

Table 1-2. MPT-HL (indoor) with static modulationMPT-HL (INDOOR) WITH STATIC MODULATIONRF BANDSTANDARD DU LATION(QAM)LAYER2 0-6 BER)(dBmSYSTEMGAIN3(dB)7/8 GHz150, 175,300, 9.0-69.598.510.5 GHz65MPT-HL512825.829.0-77.5106.511 GHz490, 6245.226.0-65.091.0Notes:Not all profiles may be available in current software release.Not all frequencies may be currently available.1Transmit power is measured at the output of the power amplifier.2Typical, as measured at the input to the radio receiver.3Typical, as measured from transmitter to receiver.These specifications are subject to change without notice.Alcatel-Lucent 9500 MPR Release 3 ANSIALCATEL-LUCENT DATA SHEET4

Table 2. MPT-HL (indoor) with adaptive modulationMPT-HL (INDOOR) WITH ADAPTIVE MODULATIONRF BANDSTANDARD DU LATION(QAM)LAYER2 0-6 BER)(dBm)SYSTEMGAIN3(dB)5.8 .926.0-65.591.5Lower 6 GHzstandardpowerLower 6 GHzhigh powerUpper 6 GHzstandardpowerUpper 6 GHzhigh power7/8 GHz11 GHz252.4252.4160, 340160, 340150, 175,300, 360490, 500Notes:Not all profiles may be available in current software release.Not all frequencies may be currently available.1 Transmit power is measured at the output of the power amplifier.2 Typical, as measured at the input to the radio receiver.3 Typical, as measured from transmitter to receiver.These specifications are subject to change without notice.Alcatel-Lucent 9500 MPR Release 3 ANSIALCATEL-LUCENT DATA SHEET5

Table 3-1. MPT-HC with static modulationMPT-HC WITH STATIC MODULATIONRF BANDSTANDARD DU LATION(QAM)LAYER2 -6 BER)(dBm)SYSTEMGAIN1(dB)5.8 C50256314.4618.0-65.083.0Lower6 GHzUpper6 GHz7/8 GHz11 GHz15 GHz18 GHz252.4160, 340175, 300490, 500475, 6401560Notes:Not all profiles are available in current software release.Not all frequencies may be currently available.Transmit power, receiver threshold and system gain are typical values and are referenced at the ODU antenna flange.1For guaranteed value, subtract 2 dB from typical transmission power and add 2 dB to typical receiver thresholds.These specifications are subject to change without notice.5.8 GHz MPT-HC for unlicensed applications have not been certified under FCC Part 15 as of yet, and cannot be marketed, proposed, sold or deployed at this time.Alcatel-Lucent 9500 MPR Release 3 ANSIALCATEL-LUCENT DATA SHEET6

Table 3-2. MPT-HC with static modulationMPT-HC WITH STATIC MODULATIONRF BANDSTANDARD DU LATION(QAM)LAYER2 RADIOCAPACITY(Mb/s)TRANSMITPOWER(dBm)THRESHOLD1 SYSTEM(10-6 BER)GAIN1(dBm)(dB)23 575.538 GHz700Notes:Not all profiles are available in current software release.Not all frequencies may be currently available.Transmit power, receiver threshold and system gain are typical values and are referenced at the ODU antenna flange.1For guaranteed value, subtract 2 dB from typical transmission power and add 2 dB to typical receiver thresholds.These specifications are subject to change without notice.5.8 GHz MPT-HC for unlicensed applications have not been certified under FCC Part 15 as of yet, and cannot be marketed, proposed, sold or deployed at this time.Alcatel-Lucent 9500 MPR Release 3 ANSIALCATEL-LUCENT DATA SHEET7

Table 4-1. MPT-HC with adaptive modulationMPT-HC WITH ADAPTIVE MODULATIONRF BANDSTANDARD T/R RADIOSEPARATIONTYPE(MHz)5.8 GHzunlicensed65Lower 6 GHzUpper 6 GHz252.4160, 340CHANNELBANDWIDTH(MHz)MODU LATION(QAM)LAYER2 RADIOCAPACITY(Mb/s)TRANSMITPOWER(dBm)THRESHOLD1 SYSTEM(10-6 0MPT-HC108*21.1326.0-87.5113.5MPT-HC1016 *28.2925.0-85.5110.5MPT-HC1032 126.0-83.0109.0MPT-HC3016 *87.4525.0-81.0106.0MPT-HC3032 1.1325.0-86.5111.5MPT-HC1016 *28.2924.0-84.5108.5MPT-HC1032 25.0-82.0107.0MPT-HC3016 *87.4524.0-80.0104.0MPT-HC3032 0-68.090.0Notes:Not all profiles are available in current software release.Not all frequencies may be currently available.Transmit power, receiver threshold and system gain are typical values and are referenced at the ODU antenna flange.1For guaranteed value, subtract 2 dB from typical transmission power and add 2 dB to typical receiver thresholds.* Subject to FCC Part 101 Rules.These specifications are subject to change without notice.5.8 GHz MPT-HC for unlicensed applications have not been certified under FCC Part 15 as of yet, and cannot be marketed, proposed, sold or deployed at this time.Alcatel-Lucent 9500 MPR Release 3 ANSIALCATEL-LUCENT DATA SHEET8