Loader Attachments Price Pages - ESCNJ
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25BOBCAT COMPANY PRICE PAGESNA LOADERS – ATTACHMENTSPlease note the following when using Bobcat Price Pages:-All prices are shown in U.S. dollars.Check BobcatNET Pricing Homepage for current Canadian exchange rate.All Parts Pricing valid only for North America.Prices and specifications are subject to change without notice.THE FOLLOWING UPDATES HAVE BEEN MADE TO THIS 164/20/167/1/168/17/161/18/17Description of ChangeDiscontinued the bundles of 8 pallet fork frames and pairs of teeth. Replaced with the bundles of 10pallet fork frames and pairs of teeth.Discontinued tree fork.Added attachment approvals for S740 and S740HAdded alert for 7147900 wheel kit on 84” sweeper: (Not Recommended for use with the 7122418Gutter Brush)60” Soil Conditioner was removed and is no longer availableRemoved basic landplane attachments in 48”, 72” and 78” sizesRemoved 607 backhoe. Updated laser transmitter part numbers.Replaced Trimble Transmitters GL412: PN 6697972 and GL422: PN 6697973 with the GL412N:PN 7275231 and the GL422N: PN 7275232 respectively.Added 3D Sensor Kit PN: 7276540 and 3D Harness Kit PN: 7276541.Effective Wednesday July 1st, 2015 Bobcat Company has adjusted the SLP of select attachments.Removed bundled part number from buckets, spill guards and pallet forks and frames.Added PN 7257723, Tier 4 Forestry Applications KitRemoved Bucket BundlesAdded MT85 CII mounting brackets and approved attachments: 7272933, 7272954, 7272912,7272919, 7276448, M7040Removed select planer drum optionsAdded S595 to approved attachmentsRemoved 12” and 16” digge. PNs: 6719754 and 6719755 respectively.Added 7229102: S450 and T450 M-Series Attachment Control Kit, 7-PinRemoved Tree Spade modelsSkid Shoe for Tillers are now aftermarket parts. No longer standard equipment.Discontinued Trenching Buckets with PN’s: 6537147, 6537143, 6532776, 6532918, 6533031,6536694, 6536930, 6536934, 6537130, 6537139Removed 709 Backhoe specs.Added Auger shaft diameters.Updated Backhoe 9BH price.Removed 48” sweeper with PN 7149358.Added attachment approvals for T595 and T595H. Removed PN 7162567: 73” Smooth Shell KitRemoved PN 6812937, 6811461, 6811452Removed PN 7100250 Kit Stabilizer Mount.Added Backhoe 7BH specs.Effective Friday, July 1st 2016, Bobcat Company has adjusted the SLP of select attachment options.Updated Snowblower and hydraulic motor approvals.Updated 8811 & 9BH Backhoe Kit NumbersPrices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.1North American Suggested List Prices2019 Price BookPage 1 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25BOBCAT COMPANY PRICE PAGESNA LOADERS – ATTACHMENTSPlease note the following when using Bobcat Price Pages:-All prices are shown in U.S. dollars.Check BobcatNET Pricing Homepage for current Canadian exchange rate.All Parts Pricing valid only for North America.Prices and specifications are subject to change without 01806/12/201811/29/201812/5/201801/01/2019Removed PN 7196475 Spill GuardRemoved PN 6680073 & 7275231 Laser TransmitterRemoved PN 7235866 Latch KitAdded T740 for PN 7168488, 7204238, & 7168932Added Max Clamping Force Spec to Combo BucketsAdded Harness Accessory P/N 6736214 under 14-Pin Attachment Control P/N 6729313 for use withHeater KitEffective Monday, July 10st 2017, Bobcat Company has adjusted the SLP of select attachmentoptions.Removed 500-series loaders as approved machines for 8811 BackhoePallet fork – Standard Duty 2.5K addition to line up, Heavy Duty 4K replace Standard Duty 4K,Severe Duty 5.5K Replaces Heavy Duty 5.5KRemoved Rear Stabilizers for T870Effective Thursday, January 1st, 2018 Bobcat Company has adjusted the SLP of select options andpower units.Added stab/water/weight kit mount for Torsion T870 from PARTSUpdated Backhoe X-Change bucket part numbersAdded M7001-R01-C03 8.0 Hydraulic Motor Package for use with SB200 x 60" SnowblowerRemoved Backhoe Mounting Kit PN 6958101 and 54” Fertilizer & Grain Bucket PN 6557599NB Breaker line addedUpdated 68” and 84” Angle Broom PNs from 6905805 and 6905806 to 7337703 and 7337715 –New MI’s include Orange HD Bristles and Reversable Sweeping Direction.Updated SLPs for Jaunuary 1st, 2019*Specification(s) are based on engineering calculations and are not actual measurements. Specification(s) areprovided for comparison purposes only and are subject to change without notice. Specification(s) for yourindividual Bobcat equipment will vary based on normal variations in design, manufacturing, operatingconditions, and other factor.Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.2North American Suggested List Prices2019 Price BookPage 2 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25ATTACHMENT CONTROL KITBOBCAT LOADER ATTACHMENTAttachment Control Kits need to be installed on Bobcat loaders to operate the following attachments:Angle BroomDozer BladeSnowblowerBob-Tach Mounted BackhoeGraderSoil Conditioner, HydraulicBox Blade with LaserPlaner (For Planers withStump GrinderChipperHydraulic Depth Adjust)Tree Spades with ACDConcrete MixerSnow V-BladesWheel SawConcrete PumpNote:Attachment Control Kits are included with the High Flow Auxiliary Hydraulics Option on all763H (S/N 512220766 & above), 863H F-Series Loaders and all High Flow G-Series and newer Loaders.PARTNUMBERATTACHMENT – ORDER FROM PARTSDESCRIPTIONFor current Attachment pricing, reference BobQuote or Dealer Parts Department.Choose the appropriate kit below for your loader’s model and serial number range.G-Series thru K-Series Loaders6733142ATTACHMENT CONTROL KIT, 7-PIN . PARTS (Used on all G-Series thru K-Series loaders) (Controls 7-Pin Attachments only)(Ship Weight 5 lbs.; Estimated install time 1.5 hours)6733136ATTACHMENT CONTROL KIT, 14-PIN . PARTS (Used on all G-Series thru K-Series loaders) (Controls 14-Pin Attachments only)(May be used independently or in conjunction with Factory-Installed or Dealer-Installed7-Pin Attachment Control Kit and High Flow loaders) (Estimated install time 1.5 hours)6727739ATTACHMENT CONTROL KIT, DUAL (7 AND 14-PIN) . PARTS (Used on all G-Series thru K-Series loaders except S220, S250, S300, S330,T250, T300, T320 and A300) (Controls both 7 and 14-Pin Attachments)(Requires Front Auxiliary Hydraulics to Operate)(Estimated install time 1.5 hours)M-Series Loaders7229102ATTACHMENT CONTROL KIT, 7-PIN . PARTS (Used on S450 and T450 M-Series loaders only) (Controls 7-Pin Attachments only)(Ship Weight 5 lbs.) (Estimated install time 1.5 hours)7128426ATTACHMENT CONTROL KIT, 7-PIN . PARTS (Used on all M-Series loaders except S450 and T450) (Controls 7-Pin Attachments only)(Ship Weight 5 lbs.) (Estimated install time 1.5 hours)6733136ATTACHMENT CONTROL KIT, 14-PIN . PARTS (Used on all G-Series and newer loaders) (Controls 14-Pin Attachments only)(May be used independently or in conjunction with Factory-Installed or Dealer-Installed7-Pin Attachment Control Kit and High Flow loaders) (Estimated install time 1.5 hours)Small Loaders and Attachments Plus673265614-PIN ATTACHMENT CONTROL KIT (MT50, MT52, MT55) . PARTS (Controls attachments with up to two functions such as SG30 and SB150)(Must also order Light Kit, P/N 6732657 if using with MT50)(Estimated install time 2 hour)727544414-PIN ATTACHMENT CONTROL KIT (MT85). PARTS (Controls attachments with up to two functions such as SG30 and SB150)(Estimated install time 2 hours)714306414-PIN ATTACHMENT CONTROL KIT (S100, T110) . PARTS (S100 and T110 loaders must be equipped with Standard Controls)(Includes wiring and two replacement handles) (Controls 14-Pin Attachments with up to three functions)(14-pin T-harness required on attachment not equipped with 14-pin harness)(Estimated install time 1 hour)6733142ATTACHMENT CONTROL KIT, 7-PIN (S100, T110) . PARTS (S100 and T110 loaders must be equipped with Selectable Joystick Controls)(Controls 7-Pin Attachments only)(Estimated install time 1.5 hours)Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.3North American Suggested List Prices2019 Price BookPage 3 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25ATTACHMENT CONTROL KITBOBCAT LOADER ATTACHMENT6733136ATTACHMENT CONTROL KIT, 14-PIN (S100, T110) . PARTS (S100 and T110 loaders must be equipped with Selectable Joystick Controls)(Controls 14-Pin Attachments only) (Estimated install time 1.5 hours)672931314-PIN ATTACHMENT CONTROL KIT (463, 553, S70) . PARTS (Controls attachments with up to two functions such as SG 30 & SB150)(14-pin T-harness required on attachment not equipped with 14-pin harness)(Includes one replacement handle) (Must also order Harness Accessory P/N 6736214 if using on a loaderwith heater kit) (Estimated install time 1 hour)Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.4North American Suggested List Prices2019 Price BookPage 4 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25ATTACHMENT CONTROL KITBOBCAT LOADER ATTACHMENTPARTNUMBERATTACHMENT – ORDER FROM PARTSDESCRIPTIONSmall Loaders and Attachments PlusFor current Attachment pricing, reference BobQuote or Dealer Parts Department.7214742BOBCAT ATTACHMENTS PLUS ATTACHMENT CONTROL KIT . PARTS 6959151 (For use with competitive loaders that don’t have a factory installed control kit)(Allows competitive loaders to be equipped with 14-pin attachment control)(Attaches to the loader lift arm and frame with the use of tie straps and clamps makingit more permanent than rental and demo kit)(14-pin T-harness required on attachment not equipped with 14-Pin T-Harness)(Est. installation time—1.5 hours)SINGLE FUNCTION ATTACHMENT CONTROL KIT . PARTS(Allows all Bobcat loaders and other brand loaders to be equipped with a toggle switch mounted to theloader steering lever for control of single function attachments; angle brooms and older 72" & 84" soilconditioners with hydraulic angle only)(Estimated install time 1 hour)F-Series and Prior LoadersAll F-Series and prior loaders must use one of the following 14-Pin Control Kits.670922814-PIN ATTACHMENT CONTROL KIT (BASIC) . PARTS Use on the following loaders:751 – All Prior to G-Series753 – (S/N 508613488 & Above); (S/N 508613487 & Below) will NOT work without add’l parts.753L, 763, 7753, 773 – All Prior to G-Series853 – (S/N 508411354 & Above); (S/N 508411353 & Below) will NOT work without add’l parts.853 – All S/N 5101 & 5102 Prefix853 – (S/N 512818873 & Below)853H – All S/N 5103 & 5097 Prefix853H – (S/N 512818873 & Below)873 – (S/N 514111465 & Below)(Estimated install time 3 hours)671282014-PIN ATTACHMENT CONTROL KIT (PWM). PARTS Use on the following loaders:853 – (S/N 512818874 & Above), but (S/N 512818874 – 512821845) must also orderAdapter Module P/N 6669201 from Bobcat Parts.853H – (S/N 512818874 & Above), but (S/N 512818874 – 512821845) must also orderAdapter Module P/N 6669201 from Bobcat Parts.863 – All Prior to G-Series873 – (S/N 514111466 & Above), but (S/N 514111424 – 514111962) must also orderAdapter Module P/N 6669201 from Bobcat Parts.963 – All Prior to G-Series(Estimated install time 3 hours)670682414-PIN ATTACHMENT CONTROL KIT (40 SERIES). PARTS (Used on all 543, 553, 640, 740 and 840 loaders) (Used to operate 68" Angle Broom,60" Snow V-Blade, SG30 Stump Grinder, SB150 and 1412 Snowblowers)(Estimated install time 4 hours)PIECE PARTS 14-PIN ATTACHMENT CONTROL KIT (AHC) . PARTS (Used only on loaders with Advanced Hand Controls Prior to G-Series)(Refer to P/N 6713013 when ordering components)673265614-PIN ATTACHMENT CONTROL KIT (MT50). PARTS (Controls attachments with up to two functions) (Must also order Light Kit, P/N 6732657)(Estimated install time 1hour)6714215Note:14-PIN ATTACHMENT CONTROL KIT (RENTAL & DEMO.) . PARTS 19-PIN REMOTE ATTACHMENT CONTROL KIT (RAC) . PARTS (Used on all 740, 751, 753, 763, 773, 843, 853, 863, 873 and 963 loaders – See Note)(Estimated install time .25 hours)Attachment Control Kit for Rental & Demonstration does NOT work with High Flow Attachments,Hand Control Loaders or G-Series Loaders.6716566(Used on all 700-800 Series BICS loaders prior to G-Series)(Required for chipper, concrete mixer and concrete pump attachments with 19-Pin harnesses)(Estimated install time 2 hours)Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.5North American Suggested List Prices2019 Price BookPage 5 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25ATTACHMENT CONTROL KITBOBCAT LOADER ATTACHMENTPARTNUMBERATTACHMENT – ORDER FROM PARTSDESCRIPTIONFor current Attachment pricing, reference BobQuote or Dealer Parts Department.14-Pin Attachment T-Harness Kits6725381Converts a 7-pin attachment to include a 14-pin harness which is requiredfor use with older loaders equipped only with 14-pin attachment control kit.When installed, the attachment will include both a 7-pin and 14-pin harness.14-PIN ATTACHMENT T-HARNESS KIT . PARTS (Used with 68" & 84" Angle Brooms and 72" (S/N 232000101 and above) and 84" (S/N 651400101and above) Hydraulic Soil Conditioners) (Estimated install time .5 hours)672538314-PIN ATTACHMENT T-HARNESS KIT . PARTS (Used with Bob-Tach Mounted Backhoe, 15" and 16" Planers, 18" Planer S/N 231611101 and above, &24" Planer S/N 231711101 and above, 14" Planer Kit, Grader (S/N 648000101 thru 64801630),Laser Box Blade (S/N 657500101 thru 657500369), Snow V-Blades, 18" Wheel Saw (S/N 991800101thru 991800625) & 24" Wheel Saw (S/N 991900101 thru 991900830), SG60 Stump Grinder(Estimated install time .5 hours)695877214-PIN LASER ATTACHMENT T-HARNESS KIT . PARTS (Used on F-Series and older BICS loaders for Trimble laser control system on Grader S/N 231511101 &above and 648000101thru 64801630 and Laser Box Blade S/N 657500101 thru 657500369).Not for use with Bobcat Attachments Plus Control Kit, use p/n 6725383.672745614-PIN ATTACHMENT T-HARNESS KIT . PARTS (Used with 40" Planer S/N 991400101 thru 991401035) (Ship Weight 5 lbs.)(Estimated install time .5 hours)672538414-PIN ATTACHMENT T-HARNESS KIT . PARTS (Used with 68", 80", 90" & 96" Dozer Blades) (Estimated install time .5 hours)672816514-PIN ATTACHMENT T-HARNESS KIT . PARTS (Used with Snowblowers) (Estimated install time .5 hours)672816314-PIN ATTACHMENT T-HARNESS KIT . PARTS (Used with Sod Layer) (Estimated install time .5 hours)715535714-PIN ATTACHMENT T-HARNESS KIT . PARTS (Used with Soil Conditioner with hydraulic angle and hydraulic depth: 60" S/N A86R00101 and above,72" High Flow S/N A6TD00101 and above, 84" S/N A6TG00101 and above, 84" High Flow S/NA6TH00101 and above) (Estimated install time .5 hours)716409514-PIN ATTACHMENT T-HARNESS KIT . PARTS (Used with 84" Grader S/N 648001631 and above, 96" and 108" graders, Laser Box BladeS/N 657500370 and above, 18" Planer S/N AKS200101 and above, 24" Planer S/N AJN700101 andabove) (Estimated install time .5 hours)719647914-PIN ATTACHMENT T-HARNESS KIT . PARTS (Used with 18" Wheel Saw S/N 991800626 and above, 24" Wheel Saw S/N 991900831 and above,40" Planer S/N 991401036 and above) (Estimated install time .5 hours)Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.6North American Suggested List Prices2019 Price BookPage 6 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25ADAPTER PLATEBOBCAT LOADER ATTACHMENTQUICK SPECSOperating Weight . 87 lbs.PARTNUMBERATTACHMENTDESCRIPTIONSLP IN US (MT50, MT52, MT55, MT85)7100695ADAPTER PLATE. 513.00(Installs on competitive attachment for use with Bobcat MT50 and MT52)Note: The adapter plate is not approved for use with buckets because of reduced breakout forces and ROC.CompetitiveModel NumberDingo 22414Dingo 22400Dingo 22801Dingo 22441Dingo 22445Dingo 22420Dingo 22910Dingo 22447Harley RakeDitch Witch SK5VPDitch Witch SK5TRAttachment DescriptionHydraulic BladeAuger Power HeadUniversal Auger Power HeadConcrete BreakerTiller, 40"Boring UnitVibratory PlowTrencherM4F, M4M, M4HVibratory PlowTrencherNotesExtend hoses 20" to get full rolloutMaximum bit diameter is 30"Maximum bit diameter is 30"Extend hoses 20"Extend hoses 12"DESTINATION CHARGE/FUEL SURCHARGERefer to BobQuote or BobcatNET Other Resources Pricing Homepage for current Destination and Fuel Charges.ASSEMBLY REQUIREDATTACHMENTINSTALLATIONTIME (HOURS)Adapter Plate . Install plate on attachment .Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.70.25North American Suggested List Prices2019 Price BookPage 7 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25ANGLE BROOMBOBCAT LOADER ATTACHMENTQUICK SPECS68″860 lbs.68"63.0" @ 25 Hyd. CylinderHyd. MotorReversingChain Dr. Reduction Direct DriveFlow Range . 8-13 gpm8-24 gpmBroom Bristle Diameter . 21 3/8"32"Bristle Material . Poly BluePoly Orange HDNumber of Bristle Sections . 23 Zig-Zag36 Zig-Zag2 Straight2 StraightOperating Weight .Sweep Width Straight .Sweep Width Fully Angled .Broom Angling .Drive System .PARTNUMBER48"260 lbs.48"41.5" @ 30 ManualHyd. Motor84″944 lbs.84"77.0" @ 25 Hyd. CylinderHyd. MotorReversingDirect Drive15-28 gpm32"Poly Orange HD44 Zig-Zag2 StraightATTACHMENTDESCRIPTIONSLP IN US (MT50, MT52, MT55, MT85) (S70)690700048" ANGLE BROOM . 3,470.00(Manual Angle, 3-Positions: 30 Right, Left and Straight)(S100, S130, S150, S160, S175, S185, S205) (S450, S510, S530, S550, S570, S590, S595, S630, S650,S740,S750, S770) (A770) (T110, T140, T180, T190) (T450,T550, T590, T595, T630, T650, T740,T750, T770)733770368" ANGLE BROOM . 5,613.00(Loader must be equipped with an Attachment Control Kit – See Page 1 or 2)(When used on loaders equipped with a 14-Pin Attachment Control Kit, a 14-PinAttachment T-Harness Kit is required – See Page 3)(S150, S160, S160H, S175, S185, S185H, S205, S205H)(S510, S530, S550, S550H, S570, S570H, S590, S590H, S595, S595H, S630, S650,S740, S750, S770,S850) (A770) (T180, T180H, T190, T190H) (T550, T550H, T590, T590H, T595, T595H, T630, T650,T740, T750, T770, T870)733771584" ANGLE BROOM . 6,114.00(Loader must be equipped with an Attachment Control Kit – See Page 1 or 2)(When used on loaders equipped with a 14-Pin Attachment Control Kit, a 14-PinAttachment T-Harness Kit is required – See Page 2)Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.8North American Suggested List Prices2019 Price BookPage 8 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25ANGLE BROOMBOBCAT LOADER ATTACHMENTPARTNUMBERDEALER INSTALLED ACCESSORIES – ORDER FROM SALESDESCRIPTIONSLP IN US Water KitNOTE: Water Kits are available for use with the Angle Broom attachments – see Water Kit page for details.DESTINATION CHARGE/FUEL SURCHARGERefer to BobQuote or BobcatNET Other Resources Pricing Homepage for current Destination and Fuel Charges.ASSEMBLY REQUIREDATTACHMENTINSTALLATIONTIME (HOURS)Angle Broom .None .Attachment Control Kit . See Page 1Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.9North American Suggested List Prices2019 Price BookPage 9 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25AUGERBOBCAT LOADER ATTACHMENTAuger Drive UnitQUICK SPECSModel10Ship Weight (Auger Drive) . 191 lbs.Ship Weight (Mtg. Frame) . 162 lbs.Operating Weight (less bit) . 283 lbs.Digging Depth(without extensions) . 58"Shaft Diameter - Round . 2.5"Shaft Diameter – Hex . RPM@ 8 gpm (30 L/min.) . 48 rpm@ 12 gpm (45 L/min.) . 72 rpm@ 17 gpm (64 L/min.) . 102 rpm@ 18 gpm (68 L/min.) .@ 21 gpm (70 L/min.) .@ 22 gpm (83 L/min.) .@ 23 gpm (87 L/min.) .@ 26 gpm (98 L/min.) .Model15C245 lbs.193 lbs.358 lbs.Model15H241 lbs.193 lbs.354 lbs.Model30C263 lbs.193 lbs.376 lbs.Model30H257 lbs.193 lbs.370 lbs.62"2.5"2.0"62"2.0"62"2.5"2.0"62"2.0"57 rpm80 rpm57 rpm80 rpm41 rpm41 rpm99 rpm99 rpm51 rpm51 rpm56 rpm56 rpm109 rpm 109 rpm@ 30 gpm (114 L/min.) .@ 32 gpm (121 L/min.) .@ 34 gpm (129 L/min.) .@ 36 gpm (136 L/min.) .@ 37 gpm (140 L/min.) .@ 38 gpm (144 L/min.) .Torque70 rpm70 rpm90 rpm90 rpm@ 2000 psi (19,788 kPa) . 1021ft.lb.(1523 Nm)@ 2400 psi (16,547 kPa) . 1225 ft.lb.(1661 Nm)@ 2600 psi (17,926 kPa) .1300 ft.lb.(1763 Nm)1560 ft.lb.(2115 Nm)1300 ft.lb.(1763 Nm)1560 ft.lb.(2115 Nm)2520 ft.lb.(3417 Nm)3024 ft.lb.(4100 Nm)2520 ft.lb.(3417 Nm)3024 ft.lb.(4100 Nm)@ 2700 psi (18,616 kPa) . 1378 ft.lb.(1868 Nm)@ 3000 psi (20,684 kPa) . 1532 ft.lb.(2077 Nm)@ 3200 psi (22,753 kPa) .1775 ft.lb.(2379 Nm)1950 ft.lb.(2644 Nm)1775 ft.lb.(2379 Nm)1950 ft.lb.(2644 Nm)3402 ft.lb.(4213 Nm)3780 ft.lb.(5125 Nm)3402 ft.lb.(4213 Nm)3780 ft.lb.(5125 Nm)@ 3300 psi (22,753 kPa) .2415 ft.lb.(2908 Nm)2275 ft.lb.(3084 Nm)@ 3500 psi (24,132 kPa) .Model35PH325 lbs.209 lbs.454 lbs.Model50PH325 lbs.209 lbs.454 lbs.72"2.5"72"2.5"46 rpm36 rpm56 rpm45 rpm67 rpm53 rpm77 rpm82 rpm87 rpm92 rpm61 rpm65 rpm69 rpm73 rpm98 rpm77 rpm2387 ft.lb. 3023ft.lb.(3237 Nm) (4100 Nm)2864 ft.lb. 3628 ft.lb.(3884 Nm) (4920 Nm)3103 ft.lb. 3931ft.lb.(4208 Nm) (5330 Nm)3819 ft.lb. 3023ft.lb.(5179 Nm) (4100 Nm)2415 ft.lb.(2908 Nm)2275 ft.lb.(3084 Nm)4158 ft.lb.(5638 Nm)4410 ft.lb.(5979 Nm)Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.104158 ft.lb.(5638 Nm)4410 ft.lb. 4177 ft.lb. 5291.lb.(5979 Nm) (5664 Nm) (7175 Nm)North American Suggested List Prices2019 Price BookPage 10 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25AUGERBOBCAT LOADER ATTACHMENTPARTNUMBERATTACHMENTDESCRIPTIONSLP IN US (MT50, MT52, MT55, MT85) (S70, S100, S130, S150, S160, S175, S185, S205) (S450) (T110, T140)(T450)6808799MODEL 10 AUGER DRIVE UNIT . 1,453.00(Must also order Mounting Frame and Bit) (Must order mounting frame, light duty bitand swing stop kit when installing on MT50,MT52, MT55, and MT85)(S100, S130, S150, S160, S175, S185, S205) (S450*, S510*, S530*, S550*, S570*, S590*, S595*,S630*, S650*, S740*,S750*, S770*, S850*) (A770*) (T110, T140, T180, T190, T250, T300, T320)(T450*, T550*, T590*, T595*, T630*, T650*, T740*, T740H*, T750*, T770*, T870*)6809442MODEL 15C AUGER DRIVE UNIT . 1,781.007145345(Must also order Mounting Frame and Bit)(Auger drive unit is shipped with a 7/8" round bit retention pin, if used in conjunctionwith a hex bit a 5/8" Pin Kit P/N 6809733 is required.)MODEL 15H HEX SHAFT AUGER DRIVE UNIT .(Must also order Mounting Frame and Bit) 1,781.00(S130, S150, S160, S160H, S175, S185, S185H, S205, S205H) (S450*, S510*, S530*, S550*, S550H*,S570*, S570H*, S590*, S590H*, S595*, S595H*, S630H*, S650*, S650H*, S740*, S740H*, S750*,S750H*, S770*, S770H*, S850*, S850H*) (A770*, A770H*) (T140, T180, T180H, T190, T190H)(T450*, T550*, T550H*, T590*, T590H*, T595*, T595H*, T630*, T630H*, T650*, T650H*, T740*,T740H*, T750*, T750H*, T770*, T770H*, T870*, T870H*)6809445MODEL 30C AUGER DRIVE UNIT . 2,328.007138264(Must also order Mounting Frame and Bit)(Auger drive unit is shipped with a 7/8" round bit retention pin, if used in conjunctionwith a hex bit a 5/8" Pin Kit P/N 6809733 is required.)MODEL 30H HEX SHAFT AUGER DRIVE UNIT .(Must also order Mounting Frame and Bit) 2,328.00*Must also order Bumper Kit p/n 7172609 from PartsPARTNUMBERATTACHMENTDESCRIPTIONSLP IN US (S510, S530, S550, S570, S590, S595, S630, S650, S740, S740H, S750, S770, S850) (A770)(T550, T590, T595, T630, T650, T740, T750, T770, T870)722028035PH AUGER DRIVE UNIT . 3,644.00(Must also order 35PH/50PH Mounting Frame and Bit)(Auger Drive unit is shipped with bit retention pin)(S550H, S570H, S590H, S595H, S630, S650, S740, S740H, S750, S770, S850) (A770)(T550H, T590H, T595H, T630, T650, T740, T750, T770, T870)722798450PH AUGER DRIVE UNIT . 4,172.00(Must also order 35PH/50PH Mounting Frame and Bit)(Auger Drive unit is shipped with bit retention pin)Prices and SpecificationsLoaderAttachmentsSubject to Change Without NoticeAll Prices in U.S. DollarsCheck BobcatNET Pricing Homepage for current Canadian exchange rate.11North American Suggested List Prices2019 Price BookPage 11 of 151Bid Term: 2/20/19 - 2/19/21
Bobcat Loader Attachments 2019 Price BookThe Educational Services Commission of New JerseyNJ State Approved Co-op #65MCESCCPSGrounds Equipment Bid #ESCNJ 18/19-25AUGERBOBCAT LOADER ATTACHMENTPARTNUMBERDEALER INSTALLED ACCESSORIES – ORDER FROM SALESDESCRIPTIONSLP IN US (S70)(MT50-MT55, MT85)6812946AUGER 10 BOB-TACH MOUNTING FRAME . 486.00(Includes Mounting Hardware)(MT85)7272933AUGER 10 MTG BRACKET CII . 486.00(Includes Mounting Hardware
- Prices and specifications are subject to change without notice. . (Used on all G-Series thru K-Series loaders except S220, S250, S300, S330, T250, T300, T320 and A300) (Controls both 7 and 14-Pin Attachments) . (Allows all Bobcat loaders and other brand loaders to be equipped with a toggle switch mounted to the _ .
CATERPILLAR MACHINE PRICE LIST 914 914 WHEEL LOADER Ship Weight LIST PRICE LEICESTER, ENGLAND lbs AT DEALER Standard Equipment: . NJ State Approved Co-op #65MCESCCPS Grounds Equipment - Bid #ESCNJ 18/19-25 Bid Term: 2/22/19 - 2/21/21; Extended to 2/21/22 . Michelin Product Code #04118 Radial, non-directional tread for traction. Cut and .
Compact Track Loaders 10: All Wheel Steer Loader 17: Loader Attachments 18: Compact Excavators 51: Compact Excavators - E63/E85 54: Compact Excavator Attachments 56: . M0253 S550 Skid Steer Loader (equipped with Final Tier 4 engine) 39,416.00 30.0% 27,591.20 M0259 S570 Skid Steer Loader (equipped with Final Tier 4 engine) .
JCB BACKHOE LOADER 2CX RANGE Helping You Get the Job Done! JCB BACKHOE LOADER 2CX RANGE OPERATING WEIGHTS Operating weight includes machine equipped with standard loader bucket and standard rear attachments, full fluid levels and SAE operator. 2CX 12FT LOADER UTILITY lb (kg) lb (kg
DOOSAN WHEEL LOADER ATTACHMENTS USING THE 6 KINDS OF GOOD REASONS ONE-STOP SHOP One place for complete solutions : (carrier attachments parts service) ENGINEERING APPROVED Optimized for Wheel loader equipment high efficiency and performance, resulting in lower running and
contents page 2 fuel consumption pages 3-6 fiat 500 pages 7-10 fiat 500c pages 11-13 fiat 500 dolcevita pages 14-16 fiat 500 120th anniversary pages 17-21 fiat 500x pages 22-24 fiat 500x 120th anniversary pages 25-27 fiat 500x s-design pages 28-31 fiat 500l pages 32-35 fiat 500l 120th anniversary pages 36-39 tipo hatchback pages 40-43 tipo station wagon pages 44-47 tipo s-design
CATERPILLAR MACHINE PRICE LIST 299D3 299D3 COMPACT TRACK LOADER Ship Weight LIST PRICE SANFORD, NC, USA lbs AT DEALER Standard Equipment: POWERTRAIN Cat C3.8 turbo aftercooled diesel engine-Gross horsepower per SAE J1349 98 hp (73 kW) @ 2400 RPM-Electric fuel priming pump-Air inlet heater starting aid-Liquid cooled, direct injection
CATERPILLAR MACHINE PRICE LIST 289D3 289D3 COMPACT TRACK LOADER Ship Weight LIST PRICE SANFORD, NC, USA lbs AT DEALER Standard Equipment: POWERTRAIN Cat C3.3B diesel engine-Gross horsepower per SAE J1349 74.3 hp (55.4 kW) @ 2400 RPM-Electric fuel priming pump-Glow plugs starting aid-Liquid cooled, direct injection Air cleaner, dual element .
Abrasive water jet (AWJ) machining has been known for over 40 years. It was introduced, described and presented by Hashish [1]. It is often used to cut either semi-finished products or even final products, namely from plan-parallel plates of material. Nevertheless, applications of abrasive water jets for milling [2], turning [3], grinding [4] or polishing [5] are tested more and more often .
