SCHMIDT ManualPress
SCHMIDT ManualPressFrom 1.6 kN to 22 kN / 360 lbs. to 4,945 lbs.Efficient manufacturing requires appropriate means of production – not always automation. In particular, with small productionruns, manual presses are often the most cost effective solutions.We are continually developing the range of manual presses so thatyou can achieve your production targets. The expertise we havegained from our exposure to numerous production applications hasbeen implemented in our new models. Therefore, we can offer awide range of manual presses to suit all requirements.FeaturesFlexibility- Rapid changeover due to the easy and secure adjustment ofthe working height- Table tops with precision T-slot and precise alignmentbetween the ram and table bores allow for accurate andrepeatable set ups which reduces set-up times- The original position of the hand lever can be varied by 360 - Horizontal Pull (111 / 113)- Available for left-handed and right-handed use- The return stroke force of the ram can be adapted to differenttool weightsPrecision- Alignment 0.001" / 0.002" between upper and lower toolMaintenance-free- No lubrication necessaryLong service lifeDepending on the application, there is a wide selection of rack-andpinion presses and toggle presses to choose from. Furthermore, amodular product design gives you the opportunity to choose theappropriate press for your application.Simply the best! 5
SCHMIDT Rack-and-Pinion PressesConstant Force over the entire StrokeDo you need a long stroke and a constant force progression for assembly processes? Then, SCHMIDT Rack-and-Pinion Presses arejust the right choice.Press Type 3 / 6Press HeadNo.1 and No. 2 have a ground guidance plate and tefloncoated adjustable gibs for precise and torsion-proofguidance.Press Type 1 / 2Force at hand lever (lbs)Press Type 5FeaturesLong strokeLinear force progressionPrecise adjustment of the press depth via hardened lower stopHoned bores and ground rams provide a long service life anda precise guidance45.040.536.031.527.022.518.013.59.04.5051 20113225338Pushing force (lbs)6 SCHMIDT Presses3 6450563
From 1.6 kN to 2.5 kN / 360 lbs. to 560 lbs.Press TypePress head typeNominal forcelbsWorking strokeAinchSpecial strokesThroat depthCinchPress head heightSinchRam boreØ mmCollet (standard Ø 10)Ø mmHand lever leftAngle of rotation / 0.1 inch strokeMax. weightupper tool*lbsReturn stroke lockLocked position 1inchLocked position 2inchDisengaging accuracy approx. inchWorking heightFFrame No. 13inchFrame No. 3inchFrame No. 2inchinchFrame No. 2-600inchFrame No. 2-1000Weightapprox. lbs55R33R66R11R22R53600 - 1.575R3600.66 - 1.572.559.410H72.559.410H735400 - 2.750 - 6.293.3813.710H73R5400.70 - 2.750.70 - 3.933.3813.710H735400 - 2.750 - 6.293.3813.710H73R5400.70 - 2.750.70 - 3.933.3813.710H715600 - 3.140 - 3.933.3815.71R5601.02- 3.141.02 - 3.933.3815.715600 - 3.140 - 3.933.3815.71R5601.02 - 3.141.02 - 3.933.3815.71 - 171 - 171 - 171 - 17 10.4 10.4 8.2 8.2 8.2 8.2 5.6 5.6 5.6 5.6 3264.564.522221)Accessories0.450.130.00232.1 - 70.00312.1 - 7.43.1 - 8.2624247.8 - 23.612.9 - 40.54955R33.1 - 8.264.7 - 10.27.8 - 23.612.9 - 40.5494.7 - 14.17.8 - 23.612.9 - 40.5663R64.7 - 14.17.8 - 23.614.9 - 42.5666R4.7 - 10.25.7 - 14.99.6 - 25.59.6 - 25.59.6 - 25.514.9 - 42.5 14.9 - 42.5 14.9 - 42.550507011R5.7 - 14.99.6 - 25.514.9 - 42.57022RMechanical counterThroat depth frame (total depth)4.37 inch, 5.15 inch, 6.29 inch,7.87 inchAdditional fixture mounting platesuitable for throat depth frameMicrometer stopB x T (inch)Table SizeTable BoreØ (mm)Table HeightMounting Surface12.9915.7421.1031.8949.214.33 x 3.155.91 x 4.337.28 x 4.337.87 x 6.307.87 x 6.3020H720H720H720H720H71.812.362.363.863.864.33 x 7.285.9 x 10.237.28 x 11.027.87 x 11.417.87 x 11.41B x L (inch)0.39"M8SAOptions Standard with no additional charge Additional charges apply1)Adjustment of locking position on request* The weight was determined with hand lever position 45 forward(guidelines)K (inch)1.18"Ø 10H7No. 3 No. 6 Ø 1.25"No. 5 Ø 1.10"MØECKBxT10H990.67 0.04BOther available OptionsNickel plated - Cast parts are electroless nickel plated, steel componentsblack oxide finished, aluminum anodized, precision steel surfaces areuntreatedCustom Paint - Press and column can be painted tocustomer’s color specificationBores for Adapting Tooling - Customer specific sizescan be supplied0.354 0.00853, 16, 23, 6, 1, 23, 6, 1, 2M (inch)Frame Height0.27 0.04No. 13No. 3No. 2No. 2-600No. 2-1000Press TypeFFrame OverviewØ 20H7LPlease consult our Sales Department or Representative.Detailed dimensional drawings can be downloaded: www.schmidtpresses.comSimply the best! 7
SCHMIDT Toggle PressesThe high Force at the End of Stroke, just where it is importantPress Type 13Press Type 11 / 14 g force (lbs)1 No. 13 Force at the hand lever 200 N / 45 lbs2 No. 13 Force at the hand lever 120 N / 27 lbs900 1,012 1,124Stroke before plug-in position of the toggle (inch)FeaturesHigh force at end of stroke (see diagramm below)Honed bores and ground rams provide a long service life and aprecise guidanceStroke before plug-in position of the toggle (inch)Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are just theright 2,7003,150 3,600Pushing force (lbs)1234 No.No.No.No.17 Force at the hand lever 200 N / 45 lbs17 Force at the hand lever 120 N / 27 lbs11, 14, 15, 16 Force at the hand lever 200 N / 45 lbs11, 14, 15, 16 Force at the hand lever 120 N / 27 lbsNote: Maximum force will be reached just before extended position8 SCHMIDT Presses
From 5 kN to 15 kN / 1,125 lbs. to 3,370 lbs.Press TypePress head typeNominal forcelbsWorking strokeAThroat depthCinchPress head heightSinchinchRam boreØ mm1313F13 - 4013F - 351,1251.571.372.5515.1515.7410H713R13RF13R - 4013RF - 351,1251.571.372.5515.1515.7410H71111F11 - 4511F - 352,7000 - 1.770 - 1.373.3820.4721.2510H711R11RF11R - 4511RF - 352,7000.78 - 1.770.78 - 1.373.3820.4721.2510H71515F11R - 4511F - 352,7000 - 1.770 - 1.373.3820.4721.2510H715R15RF11R - 4511RF - 352,7000.78 - 1.770.78 - 1.373.3820.4721.2510H71414F11 - 6011F - 502,7002.361.963.3819.6820.4710H714R14RF11R - 6011RF - 502,7002.361.963.3819.6820.4710H71616F11 - 6011F - 502,7002.361.963.3819.6820.4710H716R16RF11R - 6011RF - 502,7002.361.963.3819.6820.4710H71717F11 - 2011F - 203,3700 - 0.780 - 0.783.3824.4025.1910H795 3/83/795 3/83/7110 4.5 / 105.5 / 13.5110 4.5 / 920 / 13.5110 4.5 / 105.5 / 13.5110 4.5 / 94.5 / 13.5125 3 / 5.54.5 / 11125 3 / 5.53/9125 3 / 5.54.5 / 11125 3 / 5.53/990 5.5 / 5.5 / -Hand lever leftAngle of rotationMax. weightupper tool*Return stroke lock 1)lbsLocked position 1inch bef. BDC0.510.470.470.55Locked position 2inch bef. 0015Disengaging accuracyWorking heightFFrame No. 13inchFrame No. 3inchFrame No. 2inchFrame No. 2-600inchFrame No. 2-1000inchWeight0.552.55- 7.08 2.55 - 7.081.57 - 6.10 1.57- 6.10approx. lbsAccessories3.14 - 8.26 3.14 - 8.262.16 - 7.08 2.16 - 7.083.54 - 8.66 3.54 - 8.662.55 - 7.67 2.55 - 7.674.33 - 13.77 4.33 - 13.773.14 - 12.79 3.14 - 12.792.75 - 7.872.36 - 7.284.72 - 14.17 4.72 - 14.373.54 - 13.1 3.54- 13.17.87 - 23.03 7.87 - 23.03 7.87 - 23.03 7.87 - 23.03 8.26 - 23.42 8.26 - 23.42 8.26 - 23.42 8.26 - 23.42 7.87 - 23.036.8 - 226.8- 226.8 - 226.8 - 227.2 - 22.44 7.2 - 22.44 7.2- 22.44 7.2 - 22.446.8- 2213 - 40.1512 - 39.3713 - 40.1512 - 39.3713 - 40.1512 - 39.3713 - 40.15 13.38 - 40.55 13.38 - 40.55 13.38- 40.55 13.38 - 40.55 13.38 - 40.1512 - 39.37 12.40 - 39.76 12.40 - 39.76 12.40- 39.76 12.40 - 39.76 12 - F1515F15R15RF1414F14R14RF1616F16R16RF1717F Mechanical counterThroat depth frame (total depth)4.37 inch, 5.15 inchAdditional fixture mounting platesuitable for throat depth frameNr. 13Nr. 313M (inch)18.7011, 14, 1721.25Nr. 215, 1627.55Nr. 2-60011, 14, 15, 16, 1738.34Nr. 2-100011, 14, 15, 16, 1755.51Table BoreØ (mm)Table SizeB x T (inch)4.33 x 3.14Table HeightMounting Surface20H7K (inch)1.85.9 x 4.320H72.365.9 x 10.237.28 x 4.320H72.367.28 x 11.027.87 x 6.2920H73.857.87 x 11.417.87 x 6.2920H73.857.87 x 11.411.18"SOptions Standard with no additional charge Additional charges apply1)Adjustment of locking position on request* The weight was determined with hand lever position 45 forward(guidelines)B x L (inch)4.33 x 7.28B0.39"Frame HeightCØ 10H7BxTNo. 113, 13: Ø 25 mmNo. 11, 14 - 17: Ø 32 mmØ 20H7Please consult our Sales Department or Representative.Detailed dimensional drawings can be downloaded: www.schmidtpresses.com0.354 0.008LKNickel plated - Cast parts are electroless nickel plated, steel components black oxide finished, aluminum anodized, precision steelsurfaces are untreatedCustom Paint - Press and column can be painted to customer’s colorspecificationBores for Adapting Tooling - Customer specific sizes can be suppliedAMOther available Options0.27 0.04Press TypeFFrame Overview M8Block clamping piece10H990.67 0.04Simply the best! 9
SCHMIDT Toggle Presses with Horizontal PullThe high Force at the End of Stroke, just where it is importantFeaturesHigh force at end of stroke (see diagramm below)Honed bores and ground rams provide a long servicelife and a precise guidanceDo you need a high force at the end of stroke for material-transforming processes? Then, SCHMIDT Toggle Presses are just theright choice.Ergonomic Press with horizontal PullWith press No. 113 and No. 111 the manual forceis applied by pulling the lever towards the body.This press is especially suitable for rapid production at small forces.Press Type 1110.150.110.07120.0300225450675900Pushing force (lbs)1 No. 113 Force at the hand lever 120 N / 27 lbs2 No. 113 Force at the hand lever 50 N / 11 lbs1,125Stroke before plug-in position of the toggle (inch)Stroke before plug-in position of the toggle (inch)Press Type 1130.150.110.0720.030045090011,3501,8002,250 2,7003,150 3,600Pushing force (lbs)1 No. 111 Force at the hand lever 200 N / 45 lbs2 No. 111 Force at the hand lever 120 N / 27 lbsNote: Maximum force will be reached just before extended position10 SCHMIDT Presses
From 2.5 kN to 12 kN / 560 lbs. to 2,700 lbs.Press Type113113F113R113RF111111F111R111RFPress head type113113F113R113RF111 - 45111F - 50111R - 45111RF - 50Nominal forcelbs5605602,7002,7000 - 1.100 - 1.100.86 - 1.100.86 - 1.100 - 1.771.960.94 - 1.771.96Working strokeAThroat depthCinch2.552.553.383.38Press head heightSinch6.697.087.487.878.468.859.449.84Ø mm10H710H710H710H780 80 90 90 2/71/71/61/76/7/-6/7/-inchRam boreHand lever leftAngle of rotationMax. weightupper tool*Return stroke lock 1)Locked position 1Locked position 2Disengaging accuracyWorking 2F1.96 - 6.491.57 - 6.101.96 - 6.491.57 - 6.10Frame No. 13inchFrame No. 3inch5.11 - 8.074.52 - 7.675.11 - 8.074.52 - 7.67Frame No. 2inch5.11 - 13.384.52 - 13.05.11 - 13.384.52 - 13.0Frame No. 2-600inch7.87 - 22.837.28 - 22.447.87 - 22.837.28 - 22.44Frame No. 2-1000inch13.0 - 40.1512.2 - 39.3713.0 - 40.1512.2 - 39.37Weightapprox. 11RF Mechanical counterThroat depth frame (total depth)4.37 inch, 5.15 inchAdditional fixture mounting plate suitable for throat depth frameBlock clamping piece 2)Frame OverviewPress TypeFrame HeightM (inch)Table SizeB x T (inch)Table BoreØ (mm)Table HeightK (inch)Mounting SurfaceB x L (inch)11318.704.33 x 3.1420H71.814.33 x 7.2811121.255.90 x 4.3320H72.365.90 x 10.23No. 211127.557.28 x 4.3320H72.367.28 x 11.02No. 2-60011138.347.87 x 6.2920H73.857.87 x 11.41No. 2-100011155.517.87 x 6.2920H73.857.87 x 11.410.39"1.18"BxTKOther available OptionsNickel plated - Cast parts are electroless nickel plated, steel componentsblack oxide finished, aluminum anodized, precision steel surfaces areuntreatedCustom Paint - Press and column can be painted to customer’s colorspecificationBores for Adapting Tooling - Customer specific sizesØ 20H7No. 113: Ø 0.98"No. 111: Ø 1.25"FAØ 10H70.354 0.008L0.27 0.04MSBOptions Standard with no additional charge Additional charges apply1)Adjustment of locking position on request2)Stroke reduction about 0.39 inch by version withadditional charge* The weight was determined with hand lever position45 forward (guidelines)M8No. 13No. 310H990.67 0.04Simply the best! 11
SCHMIDT Toggle Presses with Square RamOptimum Guidance and Anti-RotationDo you need a high force at the end of stroke for material-transforming processes? Then, SCHMIDT Toggle Presses are just theright choice.11 V13 V14 VPress Type15 V16 VPress 3,150Pushing force (lbs)1 No. 11, 14, 15, 16 Force at the hand lever 200 N / 45 lbs2 No. 11, 14, 15, 16 Force at the hand lever 120 N / 27 lbsNo. 13 see on page 83,600Stroke before plug-in position of the toggle (inch)Stroke before plug-in position of the toggle (inch)Press TypeFeaturesHigh force at end of strokeSquare ram is anti-rotational (no die sets required)Precise adjustment of the press depth via hardened lower stopFully adjustable, play-free teflon-lined gibs19 V0.150.110.07210.0300450900 1,350 1,800 2,250 2,700 3,150 3,600 4,050 4,500Pushing force (lbs)1 No. 19 Force at the hand lever 200 N / 45 lbs2 No. 19 Force at the hand lever 120 N / 27 lbsNote: Maximum force will be reached just before extended position12 SCHMIDT Presses
From 5 kN to 22 kN / 1,125 lbs. to 4,950 lbs.Press TypePress head typeNominal forcelbs.Working strokeAinchThroat depthCinchPress head heightRam boreHand lever leftAngle of rotationSinchØ mm13 V13 VF13 VR13 VRF11 V11 VF15 V15 VF11 VR11 VRF15 VR15 VRF14 V14 VF16 V16 VF14 VR14 VRF16 VR16 VRF19 V19 VF19 VR19 1V-6011VF-6011VR-6011VRF-6011VR-6011VRF-6019V-40 1)19VR-40 250 - 1.574,9500 - 1.570.39 - 1.570.98 - 1.77 1.18 - 2.36 1.18 - 2.36 1.18 - 2.36 1.18 - 2.360 - 1.570.39 - 1.570.59 - 1.57 1.02 - 1.57 0.98 - 1.77 0.98 - 1.77 0.98 - 10H710H710H720H720H795 Max. weightupper tool*lbs95 inchinchFrame No. 2-600inchFrame No. 2-1000inchFrame No. 19Frame No. 19-400Frame No. 19-500Weightinchinchinchapprox. lbsAccessories110 110 110 125 125 125 125 175 175 3/93/916 / 916 / 916 / 916 / 92/82/82/82/84.5 / -4.5 / -4.5 / 84.5 / 114.5 / 114.5 / 114.5 / 112/82/82/82/84.5/ -4.5 / .030.030.0010.0010.0010.0020.0020.0020.0023.54 - 8.663.54 - 8.662.55 - 7.082.55 - 7.081.96 - 6.101.96 - 6.10Frame No. 3Frame No. 2110 4.5 / 8Return stroke lock 3)inch bef. BDCLocked position 1inch bef. BDCLocked position 2Disengaging accuracyinchWorking heightFFrame No. 134,9501.02 - 1.57 0.39 - 1.77 0.39 - 1.77 0.78 - 1.77 0.78 - 1.77 0.59 - 2.36 0.59 - 2.36 1.10 - 2.36 1.10 - 2.363.14 - 8.263.14 - 8.263.14 - 8.263.14-8.462.36 - 7.082.36 - 7.082.36 - 7.482.36 - 7.484.72 - 13.774.72 - 13.774.72 - 13.774.72 - 3503.93 - 12.793.93-12.793.93- 12.793.93 - 12.797.87 - 23.037.87 - 23.038.26 - 23.228.26 - 23.227.28 - 22.447.28 - 22.447.67 - 22.637.67 - 22.6312.99 - 40.1512.99- 40.1513.38 - 40.5513.38 - 40.5512.40 - 39.3712.40 - 39.3712.79 - 39.9612.79 - 39.966.29 - 15.74 6.29 - 15.7410.23 - 21.65 10.23 - 21.652626537053705370537018718713 V13 VF13 VR13 VRF11 V11 VF15 V15 VF11 VR11 VRF15 VR15 VRF14 V14 VF16 V16 VF14 VR14 VRF16 VR16 VRF19 V19 VF19 VR19 VRFMechanical counterThroat depth frame 4.37 inch,5.15 inchThroat depth frame 5.94 inchAdditional fixture mounting platesuitable for throat depth frameTable SizeB x T (inch)Table BoreD Ø (mm)Table HeightK (inch)Mounting SurfaceB x L (inch)1311, 1415, 1615, 1615, 33 x 3.145.90 x 4.337.28 x 4.337.87 x 6.297.87 x 6.297.87 x 6.299.84 x 7.879.84 x 853.854.405.705.704.33 x 3.345.90 x 10.237.28 x 11.027.87 x 11.417.87 x 11.417.87 x 14.569.84 x 18.119.84 x 18.89SBxTØD0.27 0.04AC0.354 0.008LFOptions Standard with no additional charge Additional charges apply1)Special strokes 0.47 inch and 1.96 inch on request2)Fixture mounting plate is already existing in the frame3)Adjustment of locking position on request* The weight was determined with hand lever position 45 forward(guidelines)BFrame HeightM (inch)KNo. 13No. 3No. 2No. 2-600No. 2-1000No. 19No. 19-400No. 19-5002)Press TypeMFrame Overview2)10H990.67 0.04Simply the best! 13
SCHMIDT ManualPressOptional AccessoriesThe return Stroke lock guarantees reaching the required pressing Depth with every Stroke.151TDC (Top Dead Center) position2First locking position: Loose tools can still be aligned23Second locking position before BDC (Bottom Dead Center).From here you can only continue to BDC4After reaching BDC (Bottom Dead Center) by completing thestroke the return stroke lock is released. This guarantees arepeatable BDC and thus a constant press depth345The emergency button releases the locking function in anypositionThe Micrometer Screw serves as Stop for the rack and pinionPressesA micrometer adjustable stop specially developed for presses for thefine adjustment of the BDC. The robust and precise design ensuresthe repeatability of the stop, no matter how many strokes are taken.Fine Adjustment with Micrometer Scale for Toggle Presses1214 SCHMIDT PressesBy loosening the set screw 1 and turning the adjusting nut 2with the same tool, the setting of the BDC can be adjusted infinitely.Graduation is 0.0007 inch line to line and is reached rapidly andprecisely.
SCHMIDT ManualPressOptions suitable for your ApplicationMechanical CounterA four digit counter monitors thenumber of pieces produced. Thecounter is provided with a resetfunction.ColletFor the rack-and-pinion pressesNo. 1 and No. 2, collet bore diameter of 1 – 17 mm / 0.03 – 0.66inch.Throat extension BlockWe offer various sizes for extendedthroat depths.Special fixture Mounting PlatesSpecial fixture tabletops, designedin conjunction with throat extensionblocks, provide ram to table borealignment when spacer is used.Ergonomic left-handed DesignWith most press types, left-handedor left- / right-handed design is anavailable option.Upper Tooling AdapterAdapter for tools with a diameterof 5 – 20 mm / 0.19 – 0.78 inch.Nickel plated DesignPress frames and cast parts areelectroless nickel-plated, steelcomponents are black oxide finished,aluminum parts are anodized, precision steel surfaces are untreated.Ergonomic HandleSwivelling handle for improvedcomfort; easy and flexible installation on the hand lever.Press BasePlastic (9.84 x 13.38 inch),including fasteners.Stop ClampFor Toggle Presses.How to OrderOrder Key for press optionsR incl. return stroke lock with emergency releaseF incl. fine adjustment (for toggle presses)Z incl. mechanical counterM micrometer screw (for rack-and-pinion presses)RF incl. return stroke lock with emergency release and fineadjustmentOrder ExampleNo. 3 R SCHMIDT Rack-and-Pinion Press No. 3incl. return stroke lock with emergency releaseorNo. 13 RFZ SCHMIDT Toggle Press No. 13incl. return stroke lock with emergency release,fine adjustment and mechanical counterSimply the best! 15
SCHMIDT ManualPress 300 SeriesManual Presses with Process MonitoringProcess reliability, force / stroke monitoring of the joining processand EN ISO-compatible documentation of the results are becomingthe major factors for small and medium production at a manualworkplace.Process reliability – not just a sloganThe system software allows easy setup of quality control criterea for100 % in-process monitoring.The SCHMIDT ManualPress 300 Series system with SCHMIDT PressControl 600 includes:Integrated reliable measuring technologyHigh resolution of the obtained process dataGraphical and numerical output of the processing resultsQuality monitoring using freely selectable tolerancesAssembly system with patented return stroke lock andprogrammable clutch.16 SCHMIDT Presses
SCHMIDT ManualPress 300 SeriesProcess Reliability for Manual Workplaces, Force Range 90 lbs. to 2,700 lbs.Functional componentsElectronic stroke lockIntegrated transducer- Force sensor- Incremental encoderIntegrated signal amplifierProgrammable overload couplingBFeaturesLinear force progression for No. 305 and No. 307High force at the end of stroke for No. 311Precise adjustment of the press depth via micrometer fine adjustmentGuides require little maintenance, have little wear and are lockedagainst rotation. This results in precise operation and a longservice lifeOptimum fit and form closure due to dovetail guide on thepress headQuick set-up- Exact alignment of ram bore to the table of 0.002 inch- Height adjustment using a crank- Precision bores in ram and column base plateNo. 305No. 1"Ø 1.14"SNo. 311Ø 1.65"Ø 10H7Ø 0.98"Ø 6H70.354 0.008F0.27 0.04MAØ 0.63CØ 1.18"Press Type10H9Nominal forceForce at the hand leverWorking strokeThroat depthPress head heightRam boreStroke fine adjustmentStroke resolution90.67 0.04KBxTDØ 10H7ManualPress 305lbsapprox. lbsAinchCinchSinchØ mminchinchAngle of rotation / mm strokeLResolution, processdata acquisitionAccessoriesStronger return assist springSpeed control305307stroke inch/incforce lbs / incWorking heightFrame No. 7Frame No. 7-600 3)311Max. Weightupper tool*Throat depth frame 2) 3) (total depth)6.65, 8.22, 9.80 inch30731190110 - 1.655.0712.206H70.00070.0001900450 - 2.125.0716.4110H70.00070.00012,700450 - 1.96 1)5.0721.8510H70.00070.00013.3 4.8 non linear0.00020.0280.00020.280.00020.78Finch 2.36 - 10.62 1.96 - 10.23 1.96 - 5.51inch 3.54 - 23.62 3.14 - 23.62 3.14 - 18.89lbsWeightProtection type305approx. lbs122/790IP 5490IP 54132IP 54FrameOverviewPress TypeFrame HeightM (inch)Table SizeB x T (inch)Table BoreD (Ø mm)Table HeightK (inch)Mounting SurfaceB x L (inch)No. 7No. 7-600305, 307, 311305, 307, 31123.6237.797.08 x 5.907.08 x 11.0220H720H73.544.3312.99 x 14.2112.99 x 18.30 - 19.88OptionsAdditional charges apply1)The fine adjustment increases the working stroke by 0.12 inch2)Throat depth frame only available with frame No. 7-6003)Increased throat and higher frame lead to smaller nominal forcesfor No. 311* The weight was determined with hand lever position 45 forward(guidelines)Other available OptionsNickel plated – Cast parts are electroless nickel plated, steelcomponents black oxide finished, aluminum anodized, precisionsteel surfaces are untreatedCustom Paint – Press and column can be painted to customer’scolor specificationBores for Adapting Tooling – Customer specific sizes can besuppliedSimply the best! 17
SCHMIDT ManualPress 300 SeriesProcess Reliability for Manual WorkplacesManualPress 300 Series with SCHMIDT PressControl 600control unitForce / stroke monitoring of the entire pressing operation- Allows for extensive error analysisProcess reliability:- Separation of the power flow- Utilizing the interface of external sensors and actuators, theclutch is engaged once the workpieces are placed properly- Locking of the press with failed parts- Secure separation and acknowledgement of Pass and Fail(“Poka Yoke”)Forward Stroke Lock Mode (the return Stroke is released)Press blocked / restricts the force flow in forward stroke- When reaching a defined force- When reaching the strokeFor protecting the produced parts and the force sensor of the press.18 SCHMIDT PressesFreely programmable positioning, stopping and braking inforward and return stroke and end position- Process intervention- Quality monitoring- Reduction of scrap costs and elimination of errorsShort changeover times due to pre-selection of stored workingprofilesReturn Stroke Lock Mode (the forward Stroke is released)Press blocks the return stroke- If the necessary force has not been reached- If the required stroke has not been reachedThis ensures that the user always completes the operation.
SCHMIDT ManualPress 300 SeriesExamples with Process Verification WorkplacesBoth examples below can be combined arbitrarily when taking intoaccount the maximum available inputs and outputs.In addition, the functions of the different operating modes areavailable, which can be freely parameterized or programmed forspecial functions.part separationF / s - signalslight barriercouplingSCHMIDT ManualPress 307The control unit SCHMIDT PressControl 600 analyzes theforce / stroke signals of the SCHMIDT ManualPress usingwindowsDepending on the analysis, the PLC actuates a flap. Thus, theparts are securely separated into pass / fail binsThe light barrier generates an acknowledgement signalThis releases the press againclutch engagingSCHMIDT ManualPress 311The control unit SCHMIDT PressControl 600 does notrelease the press until all parts are completely and correctlypositionedThis avoids erroneous pressingSimply the best! 19
Options suitableFor your ApplicationControl Mounting BracketUsed for fastening the SCHMIDT PressControl 600, either mounted to the table or to the wall. The mounting bracket permits the unitto swivel 70 (with control).Calibration ToolThe calibration tool is a clamping device with which a constantlydefined force is applied to the load cell of the SCHMIDT ManualPress Serie 300 Series. In order to complete calibration, eithera SCHMIDT LoadCheck or a customer supplied calibration deviceis required. Photo on left side shows the device for the SCHMIDT ManualPress 305. The right side is for SCHMIDT ManualPress307. The SCHMIDT ManualPress 311 is being calibrated by usingthe fine adjustment mechanism in BDC.External Reset ButtonWe recommend an external reset button in rough production environments.CANopen Compact BoxWith this add-on up to 16 digital combination in- / outputs (8 inand 8 outputs) are provided, useable optionally as in- or output.Ergonomic HandleSwivelling handle for improved comfort; easy and flexible installation on the hand lever.Speed ControlTo reach a very high repeatability by pressing on force and stroke, aspeed control can be installed optionally instead of the micrometerscrew, which brakes the pressing process shortly before achievingthe end position.Press BasePlastic (9.84 x 13.38 inch), incl. fasteners.20 SCHMIDT Presses
Precise adjustment of the press depth via hardened lower stop. Honed bores and ground rams provide a long service life and . a precise guidance Press Type 5. Press Type 3 / 6 Press Type 1 / 2 Press Head No.1 and No. 2 have a ground guidance plate and teflon-coated adjustable gibs for precise and torsion-proof . guidance. SCHMIDT Rack-and .File Size: 2MBPage Count: 16
forming processes? Then, SCHMIDT Toggle Presses are just the right choice. Characteristics High force at the end of stroke (see diagramm below) Honed bores and ground rams provide a long service life and a precise guidance Press Type 13RFZ Press Type 11 / 14 -17R Pushing force (kN) 1 No. 17 Force at the hand lever 200 N
forming processes? Then, SCHMIDT Toggle Presses are just the right choice. Features High force at the end of stroke (see diagramm below) Honed bores and ground rams provide a long service life and a precise guidance Press Type 13RFZ Press Type 11 / 14 -17R Pushing force (kN) 1 No. 17 Force at the hand lever 200 N
The Katori Shinto ryu: An etic impression. (a research newsletter of the International Hoplological Research Center), Tokyo, Japan. HOPLOS, 4, 1. Schmidt, R.J. (April, 1982). Kendo: The martial way of Japanese fencing. Journal of Physical. Richard J. Schmidt Curriculum Vitae Page 5 Education, Recreation and Dance.
The Stokes-Einstein relation for the self-di usion coe cient of a spherical particle suspended in an incompressible uid is an asymptotic result in the limit of large Schmidt number, that is, when momentum di uses much faster than the particle. When the Schmidt number is moderate,
Transform Kalman Filter (ETKF), the Ensemble Adjustment Kalman Filter (EAKF), and a filter . An operator on V is called a Hilbert-Schmidt operator if hA,Bi HS , and HS(V) is the space of all Hilbert-Schmidt operators on V. The Hilbert-Schmidt norm again dominates
Tarantula Metriopelma zebratum Banks, 1909 Costa Rican Suntiger Tarantula Nhandu chromatus Schmidt, 2004 White Striped Birdeater Nhandu coloratovillosus (Schmidt, 1998) Brazilian Black & White Nhandu vulpinus (Schmidt, 1998) Brazilian Giant Blonde Pamphobeteus antinous Pocock, 1903 Bolivian Blueleg Pamphobeteus fortis (Ausserer, 1875)
LT Schmidt COMM (619) 553-0105, (c) (831) 521-5627 Benjamin.j.Schmidt@navy.mil Benjamin.Schmidt.mil@ncte.navy.smil.mil Off Base: dial 9 DSN: dial 80 (CONUS Only) Bldg 58 Admin FAX: Unclassified: (619) 553-4731 (Admin) Secure: (619) 553-0893 (see me
Introduction to Phonetics for Students of English, French, German and Spanish This Introduction to Phonetics was originally a booklet produced in the School of Modern Languages at the University of Southampton, to serve as a background and further reading text for the Articulatory Phonetics component of our first-year Linguistics unit. It focuses on the structure and linguistic function of .
