Combine Sickle Repairs (OEM Style) - Agco Series 2-8 .
Combine Sickle Repairs (OEM Style) - Agco Series 2-8 & ChallengerSections and Section BoltsOrder No. DescriptionStockK412051(25/box)Single point section, Kondex no. 432-051 extra heavy, chrome, topserrated section. Fits 300, 500, 700, 800 series heads with bolt onsections. 2” hole spacing. 2-7/8” long x 3” wide. Big Tooth.8118 1.69BDC6700B(25/box)Double point section. Replaces Agco no. 71353125. Fits all headswith Clean Cut system. Big Tooth.887 1.25KDC55Section bolts and nuts, for use with single point or double pointsections, 5/8” long, box of 50.8465 9.26KDC55114Section bolts and nuts, for use with single point or double pointsections, 1-1/4” long, box of 25.4253 7.50Guards, Hold Down Clips, Wear PlatesOrder No. DescriptionStockRetailBU325Double prong guard, Replaces AC no. 71341601, 71386962, and7116504. Fits all Agco 300, 500, 700, 800, 7000, 7200, 8000, 9250series flex heads and Challenger.1689 12.30K5116Hold down clip, fits all flex heads and early rigid heads. For usewith riveted or bolted sickles.9139 4.56BDC5150HHigh arch hold down clip for use at the drive head area. Fits allflex heads and early rigid heads.7245 6.10SDC468Steel wear plate, replaces AC no. 711766537. Fits all Gleanerheads.3318 1.90BDC5066Four prong bottom guard. Fits all Gleaner flex heads with CleanCut system & Challenger5496 13.50BDC5166Two prong top guard. Fits all Gleaner flex heads with Clean Cutsystem. Replaces AC no. 71345591. Also fits Challenger.3095 12.90StockRetailK5116Sickle Bar Drive HeadRetailOrder No. DescriptionK901118Drive head, series 3 (late) and 500 ser.02382 104.00Sickles - Split, without drive head - Can ship UPSTo fit Agco OEM guards with 3” cutting systems. Series 2 thru 8 headers. Also Massey 9850 flex.Order No. DescriptionStockRetailCR28785Split sickle, 20’ with big tooth sections.000038 375.00CR24074Split sickle, 25’ with big tooth sections.000439 425.00CR28789Split sickle, 30’ with big tooth sections.008638 460.00174CFC Distributors, Inc. Jan. 2016 CatalogPhone 800-548-6633
Combine Sickle Repairs (OEM Style) - Agco DynaFlex DraperChallenger FDH, Gleaner 9250 DynaFlex, Massey 9250 DynaFlexSections, Guards, and BoltsOrder No. DescriptionSC16538SC16518420.100.058SC805032 Point guard to fit Agco Dyna Flex and Agco headers equiped with SCH cuttingsystems.2 Point open top Guard for drive head area.Section, 7 serrations per inch. Made in the USA. Sold and priced each, must beordered in multiples of 25.Section bolts for 420.100.058 sections. 50 per pack with nuts. Sold in packagequantities.StockRetail29515 19.9004629 33.00480 1.2008019 13.50Sickles - Split, without drive head - Can ship UPSOrder No. DescriptionK8030DK8035DK8040D8000030’ Sickle Assembly, Double Drive for Agco DynaFlex, includes RH (80344) andLH (80342) Sickle Assemblies.35’ Sickle Assembly, Double Drive for Agco DynaFlex, includes RH (80348) andLH (80346) Sickle Assemblies.40’ Sickle Assembly, Double Drive for Agco DynaFlex, includes RH (80354) andLH (80352) Sickle Assemblies.Connector kit for Agco DynaFlex sickles.StockRetail029935 499.00025549 569.00029156 649.0008619 21.00Double Drive Parts for OverlapOrder No. DescriptionStockRetailSC16519Open top guard for center overlap on Agco DynaFlex.04621 33.00SC16223Section, Countersunk, coarse tooth for overlap on double driveheads.0426 3.00SC10045Countersunk bolt for overlap sections.729 0.39SC13961Flange nut, 6 mm for section bolts.210 0.15SC13666Overlap Strap, 2 section.04819 23.00SC13665Overlap Strap, 3 section.02918 24.00Fax 800-528-2554 www.cfcdist.com175
Combine Sickle Repairs (OEM Style) - Case-IHSections and Section BoltsOrder No. Description StockK231271(25/box)S203549GuardsSingle point section, black, “Big Tooth”, top serrated, extra heavy.Replaces Case-IH no. 596321R3 & 826720C2. Used on 820,1010, 1020, 2010, 2020. 3” wide x 3-1/4” long, 3 holes.Single Point Section, used on CIH 3020.099 1.295018 1.50KDC55Section bolts and nuts, for use with single point sections, 5/8”long, box of 50.8465 9.26KDC5501Section bolts and nuts, 1” long box of 25.8744 6.83KDC55114Section bolts and nuts, for use with single point sections, 1-1/4”long, box of 25.4253 7.50Order No. Description StockRetailBU270Double prong guard, fits all 820 flex heads that use guardsequiped with cross bar. Replaces IH no. 613838R3 and187350A1.5499 13.50BU299Double prong guard, fits all Case-IH 1020; 2020 s/n CBJ020001and above. Replaces Case-IH numbers 1307299C2 and334305A1.4095 12.91BU210Double prong guard used at drive head area (3 pcs.) on model1020 with cross bar. Replaces Case-IH numbers 1326787C3,483500R4, and 187346A1.Double prong guard used at drive head area (3 pcs.) on model1020 without cross bar.Double prong guard for model 3020, NH740C. Replaces CNH no.87702973.Single prong end guard, 2 used on 1020. Replaces CIH no.1338269C1.Double prong guard. Fits Case-IH platforms 2010 and 2020 priorto s/n CBJ020000 or with s/n’s that start with HAJ. Replaces CIHpart no. 700707147, 86615982.3794 13.9034018 14.9034017 14.903048 5.757198 13.10BU329BU973BU289BU215Hold Down Clips, Wear PlatesRetailOrder No. Description StockRetailK5116Hold down clip, fits all flex heads and early rigid heads. For usewith riveted or bolted sickles.9139 4.56BDC5150HHigh arch hold down clip for use at the drive head area. Fits allflex heads and early rigid heads.7245 6.10SDC468Steel wear plate.3318 1.90176CFC Distributors, Inc. Jan. 2016 CatalogPhone 800-548-6633
Sickles for 3” OEM CutterbarsOrder No. Description StockRetailCR19912Split sickle, complete for 1020, 20’, single pt. Does not include head.004628 330.00CR19914Split sickle, complete for 1020, 25’, single pt. Does not include head.002339 415.00CR19915Split sickle, complete for 1020, 30’, single pt. Does not include head.000638 450.00CR19449Split sickle, complete for 820, 17.5’, single pt. Does not include head.002326 290.00CR19450Split sickle, complete for 820, 20’, single pt. Does not include head.004624 330.00Drive HeadsH150090Order No. DescriptionStockRetailDC880666Drive head with bearing for IH 820 Platforms. (Kondex 901-041)56967 99.50K920223Replacement bearing for DC880666, requires 2 per head. Replaces IH no. 176699C91.98142 59.84H150090Drive head for Case-IH 1020 with a 3” cutting system.03098 129.00DC848094Drive head. Fits Case-IH 2010 wit 3” cut; 2020 double drive with 3” cut PIN toCBJ021300 or PIN starting with HAJ.78769 96.95Kits for OEM Cutterbar RebuildThis kit contains all required parts to rebuild a current 3” cutting system or convert a cutterbar back to theOEM style 3” cutting system. Includes sickle, drivehead, guards, holddowns, and bolts.Order No. IH102025KIH102030Complete cutterbar kit for C-IH 1020, 15’.Complete cutterbar kit for C-IH 1020, 17.5’.Complete cutterbar kit for C-IH 1020, 20’.Complete cutterbar kit for C-IH 1020, 22.5’.Complete cutterbar kit for C-IH 1020, 25’.Complete cutterbar kit for C-IH 1020, 50299513 1,099.00 1,280.00 1,460.00 1,648.00 1,800.00 1,999.00Steel Auger FingerOrder No. DescriptionCF1320699Steel auger finger for model 1020. Replaces C-IH no. 1320699C1.StockRetail0656 7.99Combine Sickle Repairs (OEM Style) - Hart CarterSections and Section BoltsOrder No. DescriptionK112001(25/box)Stock Retail2114 1.60K904525Single point section, “Big Tooth”, top serrated,countersunk holes.Replaces HCC no. 277444. Fits all Hart Carter floating cutterbars.3” wide, 2.5” long. Has 2” hole spacing. (Kondex 132-001)Countersunk section bolt (5/8”)and nut. Box of 50.0089 11.43K904528Countersunk section bolt (1”) and nut. Box of 25.7951 8.53K904529Countersunk section bolt (9/16”) and nut. Box of 25.3667 9.47Fax 800-528-2554 www.cfcdist.com177
Sickles - with bolted sections - for Hart CarterOrder No. DescriptionK880481StockSickle, 16’ with 64 sections, HCC gen 2. With head plate, no drive head. Kondex no.831-501.851728Guards, Hold Down Clips, Wear Plates for Hart CarterOrder No. DescriptionRetail 387.97Stock RetailBU2312 prong guard. Replaces HCC no. 234006 & 232155 Agco numbers 71320143, 71176532, 1320143.34019 14.90SDC468Steel wear plate, replaces HCC no. 234140.3318 1.90K515016Hold down clip, cast. Used on riveted or bolted sickles.99012 15.70DC880662Sickle Bar Drive Heads for Hart CarterOrder No. DescriptionStockRetailC580442Head Plate, Gen 2. Kondex no. 901-015.03265 89.00DC880662Drive head, Gen 3 with bearing. Replaces HC no. 880662 and Agco no.71307323. Kondex no. 901-016.Replacement bearing for DC880662 drive head. Requires 2 per. Replaces CIHno. 176699C91.392313 189.9098142 59.84K920223Combine Sickle Repairs (OEM Style) - John DeereSections and Section BoltsOrder No. DescriptionK412021StockKDC55Single point section, top serrated, chrome, heavy small tooth. Replaces JD no. H130478 “Dura Cut”.3” wide, 3 9/32 long. 2 holeson 2 1/16” spacing.Bolt-on or rivet-on. (25/box)Single point section, top serrated, chrome, “Big Tooth”. ReplacesJD no. H136807 “Dura Lite”. 3” wide, 3 9/32” long. 2 holes on 21/16” spacing. Countersunk holes for bolt on sections. (25/box)Section bolts and nuts. 5/8” long, box of 50.KDC5501Retail1118 1.59387 1.198465 9.26Section bolts and nuts, 1” long box of 25.8744 6.83KDC55114Section bolts and nuts, 1 1/4” long box of 25.4253 7.50CH1631310815 2.40K8007901Twin point section to fit JD600 series cutting systems. ReplacesJD no. H163131. (25/box)Oval shoulder bolt kit for 600 series sections. 50/pkg with nuts.30618 22.90K8008001Oval shoulder bolt kit for 600 series Drive Head. 10 pcs.36418 20.90K432321178CFC Distributors, Inc. Jan. 2016 CatalogPhone 800-548-6633
DriveHeadsDCAH89498Order No. DescriptionStock RetailDCAH89498Drivehead for 200/900 series Auger headers.03846 69.00DCAH220050Drivehead for the 900 series Draper headers. Replaces JD no.AH220050.39676 109.90DCAH220051Drivehead for 600F Auger series headers. Replaces JD numberAH220051. Does not work on Draper heads.39556 79.90DCH157812JDNylon sleeve for 600 series drive head.0486 12.00DC231842Drivehead with nylon sleeve for 600 series Draper Heads.Replaces JD no. AH231842.39559 79.90DCAH220051Kits for OEM Cutterbar Rebuild for 200 & 900 SeriesThis kit contains all required parts to rebuild a current 3” cutting system or convert a cutterbar back to theOEM style 3” cutting system. Includes drivehead, sickle, guards, wear plates, holddowns, and hardware.Order No. DescriptionStockRetailKJD913Complete cutterbar kit for JD 213 & 913 flex heads.527648 623.00KJD915Complete cutterbar kit for JD 215 & 915 flex heads.529051 679.00KJD918Complete cutterbar kit for JD 218 & 918 flex heads.529954 799.00KJD920Complete cutterbar kit for JD 220 & 920 flex heads.529568 879.00KJD922Complete cutterbar kit for JD 222 & 922 flex heads.341276 961.90KJD925Complete cutterbar kit for JD 925 flex heads.968085 1,078.25KJD930Complete cutterbar kit for JD 930 flex heads.369599 1,279.50Guards, Hold Down Clips, Wear Plates200/900 SeriesOrder No. DescriptionStock RetailBU2402 prong guard, heat treated. Replace John Deere numbersH61954, H75386, H145791. Used on 200 and 900 series.2188 11.60BU3403 prong guard, heat treated. Replaces JD no. H25603. Used on200 and 900 series.72315 18.95K5116Steel hold down clip, fits all 200 and 900 series flex heads andearly rigid heads. For use with riveted or bolted sickles.9131 4.56K127801Cast hold down clip, fits all 200 and 900 series flex heads. For usewith riveted or bolted sickles. Replaces JD no. H127801.1326 3.30BDC5150HExtra high arch hold down clip for use at drive head area. Fits allflex heads and early rigid headers. Used on 200 and 900 series.7245 6.10SDC468Steel wear plate, replaces JD no. E47954. Used on 200 and 900series.3318 1.90Fax 800-528-2554 www.cfcdist.com179
Sickles (200/900 series) - Split, without drive head - Can ship UPSOrder No. DescriptionStockRetailCR19358Split sickle, 13’ with big tooth sections.006718 220.00CR19359Split sickle, 15’ with big tooth sections, for 215.002918 240.00CR28084Split sickle, 15’ with big tooth sections, for 915.002917 240.00CR19360Split sickle, 16’ with big tooth sections.008021 260.00CR19361Split sickle, 18’ with big tooth sections.000421 300.00CR19362Split sickle, 20’ with big tooth sections.004621 330.00CR19363Split sickle, 22’ with big tooth sections.006922 370.00CR19364Split sickle, 24’ with big tooth sections.008233 410.00CR28777Split sickle, 25’ with big tooth sections.002331 415.00CR19365Split sickle, 30’ with big tooth sections.008635 460.00600 SeriesOrder No. DescriptionStock RetailBU610Guard for 600 series heads. Has 2 long and 1 short prong.Replaces JD H205448, H213398.37115 16.75BU615Guard for 600 series heads. Has 1 long and 2 short prong. Replaces JD H213507, AH205482, AH213055, H205447, 213400.37115 16.75BU620Standard arch hold down clip, adjustable. Fits 600F, 600FD,600R, 925D, 930D, 936D. Replaces JD No AH218547.3148 5.90BU625Adjustable hold down clip for 600 series. Replaces JDAH213058, AH218548.3840 6.90Sickles (600F series) - Split, without drive head - Can ship UPSOrder No. DescriptionStockRetailK8008401Split sickle, 20’ with big tooth sections.004921 420.00K8008501Split sickle, 25’ with big tooth sections.037735 539.00K8008601Split sickle, 30’ with big tooth sections.038648 669.00K8008701Split sickle, 35’ with big tooth sections.014355 763.0080094Connector Kit for 600 series split sickle assemblies.03729 39.00DCAH220051Drivehead for 600 series. Replaces JD number AH220051.39556 79.90DCH157812JDNylon sleeve for 600 series drive head.0486 12.00Qty UsedOrder onLH SegmentMiddle SegmentRH Segment, 20’.RH Segment, 25’RH Segment, 30’RH Segment, 35’Splice Kit620f111625f12630f 635f121311233180CFC Distributors, Inc. Jan. 2016 Catalog14Phone 800-548-6633
Sickles for 600FD (Draper head) - Split, without drive head - Can ship UPSOrder No. DescriptionStockRetailK8008601Knife assembly for JD 630FD, 30’ SINGLE Drive.038649 669.00K6030FDKnife assembly for JD630FD, 30’ DOUBLE drive. Include both the LH(K8072701) assembly and the RH (K8072801).Knife assembly for JD635FD, 35’ DOUBLE drive. Include both the LH(K8073101) assembly and the RH (K8073201).Knife assembly for JD640FD, 40’ DOUBLE drive. Include both the LH(K8073501) assembly and the RH (K8073601).Connector Kit for 600 series split sickle assemblies.023069 754.00008669 835.00084867 856.0003729 39.00DC231842Drivehead with nylon sleeve for 600 series Draper Heads. Replaces JD no.AH231842.39269 89.90DCH157812JDNylon sleeve for 600 series drive head. Replaces JD no. H157812.0486 12.00K6035FDK6040FD80094DC231842Qty UsedOrder 0717807218072380094DescriptionLH Head SectionRH Head SectionMiddle SectionMiddle SectionTail SectionTail Section LHTail Section RHTail Section LHTail Section RHTail Section LHTail Section RHSplice Kit30’ SD30’ DD35’ DD40’ DD111111122211111324114Overlap Area Components for Flex Drapers SicklesOrder No. Description80696.01807018070280703Countersunk Section, 7 teeth per inch.Replaces JD no. H226352.Skid Plate, Replaces JD no. H225923.Overlap strap, replaces JD no. H205581.Countersunk bolt, replaces JD no. H228135.StockRetail3148 5.902648021150709 6.60 16.00 1.00Fax 800-528-2554 www.cfcdist.com181
Steel Auger Finger and GuideOrder No. DescriptionP87192StockRetailCF162662Steel auger finger. Replaces JD no. H162662.9846 6.99P205318Poly Auger Finger for JD 200/900 Series.7269 8.95P869Poly Auger Finger for JD 600 series.7269 8.95P87192Finger guide plate cover. Replaces JD no. H87192.3316 1.90P87044Finger guide. Replaces JD no. H87044.5019 1.50P179000Finger guide for OEM JD poly fingers. Replaces JDH179000.3025 2.90P87044P179000P205318P869Wobble Box for John Deere 200/900Order No. DescriptionWB41481StockReplacement wobble box. Fits JD platforms 200 s/n530051 & up, 900F, 900R; 218 draper; MowerConditioners 710, 720, 820, 1600, 1600A; Auger platform300A. Made in Italy. Replaces JD no. AE41481.521378Retail 975.00Universal Rake ToothOrder No. DescriptionMRMT188Rubber mounted universal rake tooth, to fit 1 1/2” round tube.182CFC Distributors, Inc. Jan. 2016 CatalogWt. Stock3025Retail 2.90Phone 800-548-6633
Combine Sickle Repairs (OEM Style) - LexionGuards, Hold Down ClipsOrder No. DescriptionBU209Stock RetailBU209Guard, 2 prong without crossbar. Replaces Lexion number7672651.4993 14.20K232882Section for Lexion head.3315 1.90BU626Guard, 2 prong with crossbar. Replaces Lexion 6267290.8689 12.40K5116Hold down clip.9131 4.56BU626Combine Sickle Repairs (OEM Style) - New HollandSections and Section BoltsOrder No. DescriptionRetailK231271(25/box)Section, black, top serrated, Big Tooth. Fits 970, 971, 972, and 973series.098 1.29BDC6700B(25/box)Double point section. 7 serations per inch, chrome. Fits all NHcutterbars with 1-1/2” cutting system.887 1.25KDC55Section bolts and nuts, for use with single point sections, 5/8” long,box of 50.8465 9.26KDC5501Section bolts and nuts, 1” long box of 25.8744 6.83KDC55114Section bolts and nuts, for use with single point sections, 1-1/4” long,box of 25.4253 7.50Guards, Hold Down Clips, Wear PlatesStockOrder No. DescriptionStockRetailBU215Double prong guard with cross bar. Used on 971, 973, 71C, 73C; 72Cand 74C to s/n PNL017000 and all s/n’s that start with HAJ. ReplacesNH no’s. 2199191, 858778, 86521587, 86553340, 86615982.7198 13.10BU299Double prong guard without crossbar. Used on 72C and 74C with s/nPNL017001 and above. Replaces NH no. 87442324.4097 12.91BU329Double prong head guard without crossbar. 2 used per head. Used on72C and 74C with s/n PNL017001 and above. Replaces 87442329.34018BU245Double prong guard. Used on 970, and 972 series. Replaces NH no.65327.4298 13.20K800Hold down clip. Fits for single drive 970, 971, 972, 973, 71C, and73C series.0925 4.14BDC5150HHigh arch hold down clip for use at the drive head area. Fits all flexheads and early rigid heads.7245 6.10DC848094Drive head. Fits 970, 971, 972, 973, 71C, 72C, 73C; 74C doubledrive with 3” cut PIN to PLN018300 or PIN starting with HAJ.78769 96.95 14.90Fax 800-528-2554 www.cfcdist.com183
Combine Sickle Repairs (OEM Style) - MacDonSections and Section BoltsOrder No. DescriptionStock RetailK232011Section, extra heavy, chrome, 7 serrations per inch. Fits MacDonplatforms 960, 962, 963, 972, 973, 974, D50, D60, D65, FD70,FD75. Replaces MacDon No 102053, 158516.9818 2.70K231471Sickle section, black, 7 serrations per inch. Fits MacDon platforms960, 962, 963, 972, 973, 974, D50, D60, D65, FD70, FD75.Replaces MacDon No 102053, 158516.1908 1.30KDC55Section bolts and nuts, for use with single point sections, 5/8” long,box of 50.8465 9.26KDC5501Section bolts and nuts, 1” long box of 25.8744 6.83KDC55114Section bolts and nuts, for use with single point sections, 1-1/4”long, box of 25.4253 7.50Guards, Hold Down Clips, Wear PlatesOrder No. DescriptionStock RetailBU344Double prong guard. Fits 960, 962, 972; Case-IH 1042. Replaces MacDon no.23064 & 28013.8685 12.40BU345Drive head guard. Fits MacDon 960, 962, 963, 972, 973, 974, D40, D50, FD70 Drapers;1394 13.30BU301Guard with one long prong and one short guard, used as the first guard. Replaces MacDon 118301 and CNH 87422040.31115 15.90BU302Guard with one long prong and one short guard, used as the last guard. Replaces MacDon 118302 and CNH 47709129.31117 15.905548 6.503000, 3020, 4000, 5000, 5010, 5020, 7000, 8000, 9000, series Windrowers/Conditioners; 910,912, 920, 922, 930, 942, A30S, A30D, A40D Auger Headers; Case-IH 1042, 1052, 2042, 2052,2062, 2142, 2152, 2162 Drapers; John Deere 140 Auger; 160 Draper; 590 Windrower; New Holland 84C, 86C Drapers; White 601, 6200 Windrower. Replaces MacDon 28014, 118345.K118499 Hold down clip. Replaces MacDon 118499 and CNH 84399893.Sickles - Split sickle with bolted sectionsSingle DriveOrder No. DescriptionStock RetailCR5384320’ Replacement sickle for single drive D50, D60, FD70, CNH 2142, 2152, 2162.008827 360.00CR2951925’ Replacement sickle for single drive D50, D60, FD70, CNH 2142, 2152, 2162.002338 415.00CR2952230’ Replacement sickle for single drive D50, D60, FD70, CNH 2142, 2152, 2162.000639 450.00CR5384735’ Replacement sickle for single drive D50, D60, FD70, CNH 2142, 2152, 2162.002939 490.00CR5385140’ Replacement sickle for single drive D50, D60, FD70, CNH 2142, 2152, 2162.006948 620.00184CFC Distributors, Inc. Jan. 2016 CatalogPhone 800-548-6633
Double DriveOrder No. DescriptionStock RetailCR5391335’ Replacement sickle for double drive D50, D60, FD70, CNH 2142, 2152, 2162.000047 500.00CR5391540’ Replacement sickle for double drive D50, D60, FD70, CNH 2142, 2152, 2162.001448 630.00CR5391745’ Replacement sickle for double drive D50, D60, FD70, CNH 2142, 2152, 2162.008069 760.00Sickle Drive HeadsOrder No. DescriptionC132896C132897LH Drive head for MacDon draper heads. Used on all single drive and the left hand sickleon double drive headers.RH Drive head for MacDon draper heads. Used on all single drive and the left hand sickleon double drive headers.Stock Retail03848 69.0003847 69.00Combine Sickle Repairs (OEM Style) - Love FloatingSections and Section BoltsOrder No. DescriptionK212121(25/box)098 1.29K904525Section, chrome, “Big Tooth”, heavy, top serrated with countersunkholes on 2” spacing. Replaces Love no. L192DC. 3” wide by 3” long.Fits all Love prior to 1979.Countersunk bolt and lock nut, 5/8” long. Box of 50.0088 11.43K904528Countersunk bolt and lock nut, 1” long. Box of 50.7958 8.53Guards, Hold Down Clips, Wear PlatesStock RetailOrder No. DescriptionStock RetailBU275Double prong guard, replaces Love LB208 and LB214. Replaces MFnumber 1036339M1, and NH numbers 271971 and 273846. Fits allLove floating cutterbars.9796 13.99SDC468Steel wear plate, replaces Love no. 220. Fits all Love floating cutterbars.3318 1.90K515016Hold down clip, cast. Used on riveted or bolted sickles.99012 15.70Sickles - Split sickle with bolted sectionsOrder No. DescriptionStock RetailCR19463Sickle, 15’ with “Big Tooth” sections.000028 250.00CR19464Sickle, 16’ with “Big Tooth” sections.006124 270.00CR19466Sickle, 20’ with “Big Tooth” sections.002725 340.00Sickle Bar Drive HeadOrder No. DescriptionDCLOVEDrive head with stabilizer bar.Stock Retail00240 60.00Fax 800-528-2554 www.cfcdist.com185
Mower / Conditioner PartsSickle SectionsK231271Order No. 5/box)K231271(25/box)Section, underserrated, black, heavy section. Fits John Deere mowers and mowerconditioners except 140, 160, 580, & 590. Fits all Ford mowers except model 505.Section, underserrated, chrome, heavy section. Fits John Deere mowers and mowerconditioners except 140, 160, 580, & 590. Fits all Ford mowers except model 505.Section, chrome, top serrated, extra heavy, “Big Tooth”.Fits JD mowers and mowerconditioners except 140, 160, 580, & 590. Fits all Ford mowers except model 505.Section, black, Big Tooth, extra heavy, top serrated. Fits Case-IH, Ford, New Holland,New Idea, Hesston, Gehl/Owatonna.StockRetail478 1.069218 1.846118 1.66097 1.29End SectionsOrder No. DescriptionStock RetailK612220Blank end half section.4931 5.63K712730Section and a half, 2 pcs. on card with rivets.3095 12.90Bolts for SectionsOrder No. DescriptionStockRetailKDC55Section bolts and nuts, 5/8” long, box of 50.8465 9.26KDC5501Section bolts and nuts, 1” long, box of 25.8744 6.83KDC55114Section bolts and nuts, 1-1/4” long, box of 25.4253 7.50K904525Countersunk bolt and lock nut, 5/8” long. Box of 50.0088 11.43K904528Countersunk bolt and lock nut, 1” long. Box of 50.7958 8.53KBDC174Section bolts and nuts, 1/4” x 5/8”, 50 pcs.9874 11.25KBDC174NSection nuts, 1/4” self locking, 50 pcs.5243 6.01186CFC Distributors, Inc. Jan. 2016 CatalogPhone 800-548-6633
Wear Plates and Holddown ClipsSDC468K5116K800Order No. DescriptionBDC5150HStock RetailSDC468Steel wear plate, heat treated, fits all mowers and mower/conditioners.3318 1.90IDC468NNylon wear plate, fits all mowers and mower/conditioners. Reduces friction.5016 1.50K800Hold down clip, steel, fits all single drive mowers and mower/conditioners. (515-066)0928 4.14K5116Hold down clip, fits all John Deere mowers and haybines. For use with riveted or boltedsickles. (515-116).9134 4.56BDC5150HHigh arch hold down clip for use at the drive head area.(515-126)7246 6.10Hay/Mower GuardsUniversal Single Prong GuardOrder No. DescriptionBU107Single prong guard, universal. Fits AC, Case, Deere, IHC, New Holland, Oliver, New Idea andother mowers with a 7/16” cutter bar. Replaces DM700John DeereOrder No. DescriptionBU220BU221BU254GehlDouble prong guard. Fits Deere mower models 37, 38, 39, 250, 350, 450 andmower conditioner models 480, 483, 485, 215, 215A, 780, 800, 880. ReplacesDeere no. E48093 and E82559. Uses 7/16” plow bolts when mounting.Double prong guard. Used on JD mower conditioner models 1207, 1209 and 1214.Also 1219 prior to s/n 710000. Replaces JD no’s E62000 and E52667.Non-clog guard. Use with 7/16” carriage bolts. Fits John Deere mower conditioners1207, 1209, 1214; 1217 and 1219 prior to s/n 710000; 1380, 1424. Windrowerauger platforms 183, 220, 230, 240. Windrower drapers 78, 120. Mowers 350, 450.Replaces John Deere E59625, E52547, E57752, E88907.Order No. DescriptionBU220BU270BU245Double prong guard. Fits Gehl models 770, 880, 1070, 1090, replaces Gehl no.072057. Uses 7/16” plow bolts when mounting.Double prong guard. Fits Gehl MA206A, HK108, HK440. Uses 7/16” plow boltswhen mounting.Double prong guard. Fits Gehl models 2130, 2160, 2230, 2262.Stock Retail3847 6.90Stock Retail10018 14.308398 13.405498 13.50Stock Retail10018 14.305499 13.504294 13.20For Stub Guards see the next page.Fax 800-528-2554 www.cfcdist.com187
Hesston and Case-IHOrder No. DescriptionBU245BU215BU270BU210Stock RetailDouble prong guard. Replaces Hesston no. 49239 and 700700845. Case-IH models8300 series, 8210, 8220, 8230, 8240, 8820, 8830.Double prong guard. Fits Case-IH 8300 series mower conditioners 525, 625, 8320,8330, 8340, 8350, 8360, 8370, 8380, SC412, SC414 and SC416 windrowers 8210,8220, 8230, 8240, 8820, 8830, 8840, DHX182, DHX212, DHX252, DHX302,DHX362, HDX121, HDX122, HDX141, HDX142, HDX161, HDX162, HDX181,HDX182, SCX100 and SMX91. Hesston mower conditioners 1109, 1110, 1120,1130, 1150, 1160, 1170, 1260, 1265, 1270, 1275, 2270 and 2275; headers 8010,8020, 8100, 8200, 8400, 9020, 9125, 9145.Double prong guard. Case-IH 100, 110, 115, 120, 1190, 1290, 1490, 1590, 75, 210,230, 275, 375, 4000, 5000, 5500.Double prong guard. Fits Case-IH mower/conditioner models 170, 175, 200,225, 816, 990, and others. Replace CIH numbers 1326787C3, 483500R4, and187346A1.4298 13.207198 13.105499 13.503795 13.90MacDonOrder No. DescriptionBU344BU345Stock RetailDouble Prong Guard. Double heat treated. Fits MacDon 3000, 3020, 4000,5000, 5010, 5020, 7000, 8000, 9000, A30S Series Windrowers and Conditioners; 912, 922 Auger Header. Replaces MacDon 23064, 28013, 118344,118484. This guard uses 7/16” carriage bolts.Drive head guard. Used on the same models as BU344 shown above. ReplacesMacDon 28014, 118345. This guard uses 7/16” carriage bolts.8685 12.401394 13.30New HollandOrder No. DescriptionBU215Stock RetailDouble prong guard. Fits all New Holland mower/conditioners, replaces NHno. 219191, 858778, and 86521587. Will interchange with BU245. This guarduses 7/16” carriage bolts.7198 13.10For Stub Guards see the next page.New IdeaOrder No. DescriptionBU280BU270Stock RetailDouble prong guard. Fits New Idea mower conditioners 290 and 299; Ford535 mower conditioners; Massey Ferguson 81 Hay Tender. Replaces NewIdea 290385Double prong guard. Fits New Idea 507, 509, 512, 514, 5107, 5109, 5112,5114. Use 3 BU210 guards at the drive head area. This guard uses 7/16”carriage bolts.188CFC Distributors, Inc. Jan. 2016 Catalog51018 14.505788 12.50Phone 800-548-6633
Tie GuardsOrder No. DescriptionStock RetailBT260Tie guard, used on Case-IH, Gehl, Hesston, New Holland.0892 14.00BT262Tie plate, high arch, used with BT260.5950 8.50BT261Tie plate, low arch, used with BT260.5131 4.50Stub GuardsBU250BU251BU252Order No. DescriptionBU250BU251BU252Stub guard used on Case-IH, Gehl, Hesston, Macdon, New Holland mowerconditioners and windrowers. Replaces Gehl 060494; Hesston 049312; New Holland257634; Case-IH 049312; Macdon 34974.Lo-arch guard clip used with BU250 guard. Fits Case-IH, Gehl, Hesston, Macdon,New Holland mower conditioners and windrowers.Hi-arch guard clip used with BU250 guard. Fits Case-IH, Gehl, Hesston, Macdon,New Holland mower conditioners and windrowers.Stock Retail0482 12.003430 4.905838 5.50Drive Heads/Bushings/SicklesNew HollandOrder No.Reference DescriptionStock RetailK901033289488Drive head, fits 474, 489.02185 116.00K901034577866Drive head, fits 495, 1495.02974 99.00K901051134182Drive head bushing, fits 460-469. (920-434)73625 32.96K901052254132Drive head bushing, fits 472, 479. (920-437)06524 32.00K901074701401Drive head bushing, fits 474, 489. (920-406)08735 54.00002118 140.00004417 180.00CR19615CR247767’ New Holland sickle assembly, NO drive head. Fits models 451, 456, 461, 467, 477,and 478.9’ New Holland sickle assembly, NO drive head. Fits models 469, 488, 489, 492, 495,and 1469.John Deere SickleOrder No. DescriptionCR247599’ JD sickle assembly, NO drive head. Fits models 1209 and 1219.Stock Retail004417 180.00Fax 800-528-2554 www.cfcdist.com189
Sickle Repair KitsOrder No. DescriptionWt. Stock RetailK711010 Repair kit for 7000 (2 1/16” centers) series sickles. (JD, IH, NH)K711012 Repair kit for 6000 (2” centers)series sickles. (AC,MF, HC)152918 27.50171027 28.81Disc & Drum Mower ComponentsBlades are sold bythe piece.BladesKuhnA B COrder No. Style56151210 (LH)56151310 (RH)56451200 (LH)BBB56451300 (RH)BModelsSizeGMD44, 55, & 66 with standard disc.GMD44,
Series 2 thru 8 headers. Also Massey 9850 flex. Fax 800-528-2554175 www.cfcdist.com Combine Sickle Repairs (OEM Style) - Agco DynaFlex Draper SC16538 2 Point guard to fit Agco Dyna Flex and Agco headers equiped with SCH cutting . 1020, 2010, 2020. 3” wide x 3-1/4” long, 3 holes. 099 1.29 . Thi
Sickle beta thalassemia (also called sickle cell thalassemia disease) his is also a form of sickle cell disease. ells may have a tendency to change from a round shape to a sickle shape. n people with sickle beta thalassemia, one parent has sickle cell trait and the other parent has thalassemia trait. II. Background
OEM: ZF Model: EC10/11/12/14 OEM: ZF ERF Model: ECS OEM: ZF Extended Input Power Steering Boxes 15 Contact us now / 01692 406017 / sales@pss.co.uk / www.pss.co.uk Model: TRIDENT OEM: ZF ERF Model: E/EC SERIES OEM: ZF Long Input Model: EC/ECX OEM: ZF Model: LANCE OEM: ZF Long Input 655010 8095 955 140 Vehicle Part No. PSS Part No.
PRECISION Spec SheetSpec Sheet XE OEM-Ready Industrial OEM equipped Meeting OEM requirements off-the-shelf with OEM-Ready, unbranded platforms, OEM XE longevity, stability and visibility and OEM Industrialized attributes with extended operating temperatures* making it an ideal edge solution. OEM XE Sharpen your competitive edge. Focus on
NI USB-621x OEM M Series USB-6211/6212/6216/6218 OEM Devices This document provides information about the dimensions, mounting options, connectors, and other components of the National Instruments USB-6211 OEM, USB-6212 OEM, US B-6216 OEM, and USB-6218 OEM devices. It also explains how to modify the USB device name in Microsoft Windows.
Sickle Cell Disease (SCD) is a genetic disorder that results in the formation of sickled red blood cells .1 People living with SCD include those who are homozygous for sickle hemoglobin (HbSS or HbSB0-thalassemia, also called sickle cell anemia) and those with one sickle hemoglobin gene plus a gene for another abnormal hemoglobin type (e.g.,
Sickle cell trait (HbSA) Carrier, no expression of disease. 4 common types of sickle cell (HbS) disorders with sickle cell anemia being the most common and most severe. HbSS, sickle cell anemia,,( y, y) (normocytic, hemolytic) HbSC, (normocytic, hemolytic) HbS Beta 0-thalassemia, (microcytic, hemolytic)
Resume PCN prophylaxis if appropriate. To Table of Contents Return to Fever Sickle Cell Definition Sickle Cell definition Sickle Cell disease includes Hb S/S, HbS/C, Hb S/β0-thalassemia, Hb S/β -thalassemia, Hb S/D, Hb S/O-Arab and all other compou
4 Introduction to Field Theory where c is a suitably chosen speed (generally not the speed of light!). Clearly, the configuration space is the set of maps j µ R4" R4 (1.10) In general we will be interested both in the dynamical evolution of such systems and in their large-scale (thermodynamic) properties. Thus, we will need to determine how a system that, at some time t 0 is in some .
