Schindler Planning Guide Moving One Billion People Every .
Machine room-less traction elevator with frequency-controlled driveCapacity 2100 – 3500 lbs, 14 – 23 passengersCapacityPassengersmax.SpeedNumberof /.75)ABCDEF (iii)(viii)G (viii)H (viii)I (iv) (viii)J m)ft(mm)ft (m) /FPM “(2235)6’-5 5/8”(1972)5‘-0“(1524)59’ (17.7) / 100 (.5)12‘-7“ 78’-9” (30.0) / 150 -7“(3835)8‘-4“(vii)(2540)6’-5 5/8”(1972)5‘-0“(1524)59’ (17.7) / 100 (.5)12‘-7“ 78’-9” (30.0) / 150 -7“(3835)8‘-4“(vii)(2540)6’-11 5/8”(2124)5‘-0“(1524)59’ (17.7) / 100 (.5)12‘-7“ 78’-9” (30.0) / 150 �-7“(3835)8‘-4“(vii)(2540)7’-7 5/8”(2327)5‘-0“(1524)8Front only5’-9 3/8”(1761)4’-4 7/8”(1343)7’-9”(2366)8/7Front onlyFront/rear5’-9 3/8”(1761)4’-4 7/8”(1343)7’-9”(2366)8Front only6’-9 3/8”(2066)4’-4 7/8”(1343)7’-9”(2366)8/7Front onlyFront/rear6’-9 3/8”(2066)4’-4 7/8”(1343)7’-9”(2366)8Front only6’-9 3/8”(2066)4’-10 7/8”(1495)7’-9”(2366)8/7Front onlyFront/rear6’-9 3/8”(2066)4’-10 7/8”(1495)7’-9”(2366)8Front only6’-9 3/8”(2066)5’-6 7/8”(1699)7’-9”(2366)8/7Front onlyFront/rear6’-9 3/8”(2066)5’-6 7/8”(1699)7’-9”(2366)HoistwaysABCInside cab widthInside cab depthInside cab height2SSO 2-speed sideopening (i)SSCO Single speed centeropeningDEHatch PlansFront Opening2SSOFront OpeningSSCOFGHI59’ (17.7) / 100 (.5)12‘-7“ 78’-9” (30.0) / 150 (.75)(3835)Shaft widthShaft depthPit depthOverheadDoor WidthDoor HeightFront/Rear Opening2SSOFront/Rear OpeningSSCOVisit www.us.schindler.com for the latest information and drawingsNotes:(i) 2SSO doors available with right or left opening.(ii) Duplex operation available.(iii) For areas in seismic zone 2 or greater, provide additional 2” (50 mm) on theF dimension.(iv) Clear overhead is defined as the lowest point below any obstruction such as:hoist beam(s), building beams, or roof structure.(v) Where permitted by code, no control closet is required. A 3-phase and 110vdisconnect must be located in both the hoistway overhead and a location in thebuilding outside of the hoistway. The latter is not required to be an elevatordedicated space.(vi) Travel height max. varies depending on speed (FPM) and capacity (lbs).(vii) Schindler recommends 8’-6” providing –/ ” tolerances on each side.(viii) For options less than 5’-0”, please contact your Schindler sales representative.Schindler Elevators, Escalators and Moving Walks9
Schindler 400AE traction elevatorfor mid-rise buildingsDynamic. Durable. Distinguished.Schindler 400AE energy-saving, traction elevatorsystem available configurations:– Space-saving, machine room-less design– Also available in machine room aboveapplications– General purpose capacities up to 4,000 lbs– Hospital/service capacities up to 5,000 lbs and5,000 AIA lbs– Speeds up to 500 fpm– Rises up to 260 ft– Cab height up to 10 ft– One- to six-car systems10Schindler Elevators, Escalators and Moving Walks– Energy efficient permanent magnet gearlessmachines– Power Factor 1 regenerative drives are availableas an option– Proven Schindler Miconic control system– Equipped with Schindler Remote Monitoring – The PORT Technology destination-dispatchsystem is available– Remote distance capability between hoistwayand control space/room– Counterweight safety available when occupiedspace below hoistway– Battery evacuation available as an option.Visit www.us.schindler.com for the latest information and drawings
General Purpose Front Opening (Rear Counterweight)Capacitylb (kg)ClearOpeningWidthft (mm)OpeningType(i)Platform SizeABMinimum Clear CabInsideCACBHoistway (iv, v)COverhead (OH) (iii) (vi)Pit Depth (P) (v)Widthft (mm)Depthft (mm)Widthft (mm)Depthft (mm)Clear Widthft (mm)Wall to Wallft (mm)D200 fpm1.0 m/s350 fpm1.75 m/s500 fpm2.5 m/s200 fpm1.0 m/s350 fpm1.75 m/s500 fpm2.5 -4”(2540)6’-7 ��-4”(2540)7’-1 ��-4”(2540)7’-9 ”(2845)7’-9 ’-8”(4775)16’-2”(4928)N/AN/AGeneral Purpose Front Opening (Side -8”(4775)N/AN/AGeneral Purpose Front and Rear Opening (Side �-1”(2159)5’-7”(1702)6’-8”(2032)4’-3 1/2”(1308)9’-0”(2743)6’-7 59)6’-1”(1854)6’-8”(2032)4’-9 1/2”(1461)9’-0”(2743)7’-1 59)6’-9”(2057)6’-8”(2032)5’-5 1/2”(1664)9’-0”(2743)7’-9 ’-9”(2057)7’-8”(2337)5’-5 1/2”(1664)10’-2”(3099)7’-9 ’-2”(4623)15’-8”(4775)N/AN/ANotes(i) SSSO and 2SSO doors available with right or left opening. 2SSO doors available in 4’-6” (1372 mm) width for all Hospital/Service Side Counterweight with addition of 2” (51 mm)hoistway width.(ii) Up to 6 car bank available. Flexible control space/room placement available up to 250’ (76 m) from the machine. Consult your local sales representative.(iii) OH dimensions based on 8’ (2438 mm) cab. Clear overhead is defined as the lowest point below any obstruction such as: hoistbeam(s), building beams, or roof structure.9’, 9’-6” and 10’ (2743 mm, 2896 mm, 3048 mm) cab options available with increased overhead. When the control space/room is remotely located, an additional 6” (152 mm) ofoverhead is required.(iv) For areas in seismic zone 2 or greater, provide additional hoistway size as follows:Increase width C by: 4” (102 mm) for General Purpose Rear Counterweight and General Purpose Side Counterweight; 2” (51 mm) for 4000 lb General Purpose Side andRear Counterweight and all Hospital/Service Side Counterweight.Increase depth D by: 2” (51 mm) for General Purpose Side Counterweight, 2100 lb, 2500 lb, and 3000 lb capacities with Front Opening only.(v) When there is occupied space below the hoistway, additional hoistway size and extra pit depth are required as follows:– For General Purpose Side Counterweight add 4” (102 mm) to width C on machine side for non-seismic (all capacities), 2” (51 mm) to width C on machine side for seismic(2100 – 3500lb) or 3” (76 mm) to width C on machine side for seismic (4000lb), and 12” (305 mm) to pit depth P (8’ cab only) (all capacities).– For General Purpose Rear Counterweight add 4” (102 mm) to depth D and 12” (305 mm) to pit depth P (8’ cab only).– For Hospital Service Side Counterweight add 12” (305 mm) to pit depth P (8’ cab only).(vi) 4000 lb capacity General Purpose Rear Counterweight requires additional overhead or machine room coordination. Please contact your local Schindler sales representative.Visit www.us.schindler.com for the latest information and drawingsSchindler Elevators, Escalators and Moving Walks11
Schindler 400AE streamlined MRL designwith dynamic space and time savingsCACADGeneral Purpose Front OpeningGeneral Purpose Front OpeningCACACBBDCACBCAGeneral Purpose Front andRear OpeningHoistwayMachine Room LessHoistwayMachine Room AbovePPTRAVELTRAVELOHOH7‘ (2134 mm)General Purpose Front andRear Opening8‘ (2438 mm)1’-8” x 6’-0”typical CBCACBCABDHatch PlanMachine Room AboveBDHatch PlanMachine Room LessFront Opening12Schindler Elevators, Escalators and Moving WalksFront OpeningVisit www.us.schindler.com for the latest information and drawings
Hospital/Service Front Opening (Side Counterweight)Capacitylb (kg)ClearOpeningWidthft (mm)OpeningType(i)Platform SizeABMinimum Clear CabInsideCACBHoistway (iv, v)COverhead (OH) (iii)Pit Depth (P) (v)Widthft (mm)Depthft (mm)Widthft (mm)Depthft (mm)Clear Widthft (mm)Wall to Wallft (mm)D200 fpm1.0 m/s350 fpm1.75 m/s500 fpm2.5 m/s200 fpm1.0 m/s350 fpm1.75 m/s500 fpm2.5 �-3”(2515)5’-8”(1727)7’-3 1/2”(2222)8’-2”(2489)9’-1 8”(1727)7’-9 1/2”(2375)8’-2”(2489)9’-7 -0”(1219)2SSO6’-1”(1854)9’-4 00 AIA(2272)4’-0”(1219)2SSO6’-1”(1854)9’-11 ospital/Service Front and Rear Opening (Side Counterweight)4000(1818)4’- 0”(1219)2SSO6’-1”(1854)8’-10 0(2045)4’- 0”(1219)2SSO6’-1”(1854)9’-4 ��(3048)5’-8”(1727)8’-5 1/2”(2578)8’-2”(2489)11’-3 ’-5”(5004)16’-11”(5156)N/AN/A5000 ”(3226)5’-8”(1727)9’-0 1/2”(2756)8’-2”(2489)11’-10 ’-5”(5004)16’-11”(5156)N/AN/ANotes(i) SSSO and 2SSO doors available with right or left opening. 2SSO doors available in 4’-6” (1372 mm) width for all Hospital/Service Side Counterweight with addition of 2” (51 mm)hoistway width.(ii) Up to 6 car bank available. Flexible control space/room placement available up to 250’ (76 m) from the machine. Consult your local sales representative.(iii) OH dimensions based on 8’ (2438 mm) cab. Clear overhead is defined as the lowest point below any obstruction such as: hoistbeam(s), building beams, or roof structure.9’, 9’-6” and 10’ (2743 mm, 2896 mm, 3048 mm) cab options available with increased overhead. When the control space/room is remotely located, an additional 6” (152 mm) ofoverhead is required.(iv) For areas in seismic zone 2 or greater, provide additional hoistway size as follows:Increase width C by: 4” (102 mm) for General Purpose Rear Counterweight and General Purpose Side Counterweight; 2” (51 mm) for 4000 lb General Purpose Side andRear Counterweight and all Hospital/Service Side Counterweight.Increase depth D by: 2” (51 mm) for General Purpose Side Counterweight, 2100 lb, 2500 lb, and 3000 lb capacities with Front Opening only.(v) When there is occupied space below the hoistway, additional hoistway size and extra pit depth are required as follows:– For General Purpose Side Counterweight add 4” (102 mm) to width C on machine side for non-seismic (all capacities), 2” (51 mm) to width C on machine side for seismic(2100 – 3500lb) or 3” (76 mm) to width C on machine side for seismic (4000lb), and 12” (305 mm) to pit depth P (8’ cab only) (all capacities).– For General Purpose Rear Counterweight add 4” (102 mm) to depth D and 12” (305 mm) to pit depth P (8’ cab only).– For Hospital Service Side Counterweight add 12” (305 mm) to pit depth P (8’ cab only).(vi) 4000 lb capacity General Purpose Rear Counterweight requires additional overhead or machine room coordination. Please contact your local Schindler sales representative.Visit www.us.schindler.com for the latest information and drawingsSchindler Elevators, Escalators and Moving Walks13
Schindler 7000 traction elevatorfor high-rise buildings Our top range, high performance elevator systemcan be found in many of the world’s landmarkbuildings thanks to its premium ride quality, topperformance, excellent reliability and innovativedesign. The Schindler 7000 offers unsurpassedperformance and customized options for the mostdiscerning customers.Schindler 7000 offers various solutions tailored tosuit a creative architectural design*– Code and design criteria — complying with theapplicable code and design data (seismic andnon-seismic)– Custom and flexible design to fit office,residential or institutional buildings– Product reliability, smooth ride and long termpartnership14Schindler Elevators, Escalators and Moving Walks– High ride quality performance at highest speeds– Ride quality measures: structural andaerodynamic car and high comfort measures*– Building sway management solution for highrise buildings*– Double deck solutions can increase rentablespace– Proven Schindler Miconic control system– Fully complies with ISO 18738 requirements– The PORT Technology destination-dispatchsystem is available– Power Factor 1 drives reduce energyconsumption and regenerates energy backinto the buildings electrical system.Visit www.us.schindler.com for the latest information and drawings
Schindler 7000 General LEED Data*ItemApplicationBenefitsEnergy– When utilized gearless high efficient with power factor PF1 technology and regenerativedrive, energy efficiency is up to 35% in comparison to the standard drive*– Unique destination control technology together with gearless high efficient PF1 providesnumerous planning solutions for busy high rise office buildings with the most energyefficient possible way, intelligently communicating with the building occupants*– Destination control ergonomically friendly design produces very efficient use of theelevator bank during peak hours.*– Generating less heat reduces the energy needed to maintain machine room temperature*– Saved energy returned back in the building main line to use for other energy savings, possibly loweringbuilding’s overall energy consumption*– Providing vertical communication optimizing effectively number of elevator trips (starts and stops) that willpreserve energy– Assisting architects to effectively plan buildings with different occupants providing the highest possiblelevel of service.LEED– Corporate commitment and green orientation*– Per project basis, cab panels constructed from environmentally friendly materialscontaining no added urea-formaldehyde*– Schindler continuously supports research and development effort focused on bringing“greener” mobility innovations to the worldwide market.– LEED AP to assist per project basis– Possibilities to help the project earn credits and meet project environmental plans*– Schindler’s U.S. manufacturing facilities in Gettysburg and Clinton are ISO 14001 certified.Notes:*Consult local Schindler representative for details.Schindler 7000 General Elevator Data*Building typeOffice, residential, institutionalRated speed500 fpm – 2000 fpm*Rated load2500 lbs – 8800 lbs*Travel height 1640 ft **Elevator typeSingle-deck, double-deck***Elevator usePassenger, serviceNumber of cars1–8Control typeConventional and destinationSchindler 7000Double-deck elevatorsSchindler 7000Single-deckNotes:* Consult local Schindler representative for details.** Travel height varies depending on speed and elevator type.*** Depending on speed, travel height and zoning.Visit www.us.schindler.com for the latest information and drawingsSchindler Elevators, Escalators and Moving Walks15
Schindler 9300AE is theversatile escalatorStylish and at home in any environmentWith configuration packages and rises up to42 feet, the Schindler 9300AE escalator systemhas design features that include:– Two, three and four flat step configurationsto meet special building design and trafficrequirements– Elegant, rounded balustrade, and innovative,stylish handrail entry for timeless appeal– Unprecedented choice of colors for handrails,steps, skirt panels, decking, endcaps and more– Advanced gear technology, setting new levels ofquietness and smoothness of operation– Three step widths for optimal passenger flowand space requirements– Exceptionally tough 1/2” stainless steel sandwichpanels providing inclined balustrades withoutstanding durability16Schindler Elevators, Escalators and Moving Walks– Mechanical components designed to meet theextreme demands of public transit operations,regardless of environmental conditions– Weatherproofing options allow outdooroperation in virtually any climate– Over two dozen important safety features– Schindler’s optional ECOLINE* packages deliversignificant energy savings.Color options expands your possibilitiesWith the Schindler 9300AE, you haveunprecedented choice in colors. Expand yourpossibilities with scratch-resistant powder-coatedcolored steps, colored handrails, escalator skirtpanels and decking in an unlimited selection ofantifriction, scratch-resistant colors, or newel endcaps in an unlimited color selection.* Where applicable by code.Visit www.us.schindler.com for the latest information and drawings
Schindler 9300AEModel 9300AE-10 two flat steps6080100Model 9300AE-20 three flat steps6080Nominal escalator width32”40”48”Nominal escalator width32”40”10048”Nominal step width24”32”40”Nominal step width24”32”40”Step width A1’-11 5/8”2’-7 1/2”3’-3 3/8”Step width — A1’-11 5/8”2’-7 1/2”3’-3 3/8”Inside to inside handrail — B2’-5 13/16”3’-111/16”3’-9 9/16”Inside to inside handrail — B2’-5 13/16”3’-111/16”3’-9 9/16”2’-9”3’-4 7/8”4’-0 3/4”Centerline to centerline handrail — C2’-9”3’-4 7/8”4’-0 3/4”Outer deck to outer deck — D3’-8 7/8”4’-4 3/4”5’-0 5/8”Outer deck to outer deck — D3’-8 7/8”4’-4 3/4”5’-0 5/8”Wellway opening single unit — E3’-11 1/4”4’-7 1/8”5’-3”Wellway opening single unit — E3’-11 1/4”4’-7 1/8”5’-3”Wellway opening two adjacent units — E7’-8 1/2”9’-0 1/4”10’-4”Wellway opening two adjacent units — E7’-8 1/2”9’-0 1/4”10’-4”14’-6”14’-6”14’-6”Pit length — F ( ��-6”26’-3”Maximum rise — H ( 1/4”) *55’-9”49’-2 1/2”42’-7 3/4”Centerline to centerline handrail — CPit length — F ( 3/4”– 0” )Maximum rise — H ( 1/4” )*Edge to edge of supports — L ( 1/4” )H x 1.732 15’-6 1/2”Maximum edge to edge of supports — L ( 1/4”)H x 1.732 18’-6 3/4”Schindler 9300AE ElevationL 1/4”EDH 1/4”1’- 5 5/8”4’-0”30 F 3/4”ABCNotes:– Dimensions are for applications in the United States. Some dimensions change for seismic applications.For specific requirements in Canada, please consult your local sales office. Schindler Elevator Corporationreserves the right to change dimensions.Keys:* Higher rises may be available; please contact your local sales representative.Visit www.us.schindler.com for the latest information and drawingsSchindler Elevators, Escalators and Moving Walks17
Schindler 9500 moving walkfor inclined and horizontal transportation Found in the world’s busiest airports, exhibition halls, subwaysystems and shopping complexesWith their minimum pit space requirements, Schindler 9500 moving walksare available in various combinations for multiple applications with designfeatures including:– Shallow mid-sections make installation on finished floors possible– Ribbed aluminum floor covers are sound proofed and feature a blackanodized base– Glass balustrades enhance styling– Opaque panels are available in a variety of finishes– Digital diagnostic panel displays moving walk functions and safety devicestatus to expedite trouble shooting and minimize downtime– All renowned Schindler safety features are included, as well as a uniquepallet and skirt arrangement which eliminates horizontal skirt gap– Schindler’s optional ECOLINE* packages deliver significant energy savings.* Where applicable by code.Schindler 9500AE-15 ElevationSchindler 9500-35 ElevationL 1/4”2’-8”F 3/4”–0”FEDF 3/4”–0”ABC4’-0”H 1/4”10 , 11 , 12 4’-0”L 1”Schindler 9500 Advanced EditionSchindler 9500Model 9500AE-15 inclined (10 , 11 , 12 )80100Model 9500-35 horizontal (0 – 3 )80100Nominal walk width40”48”Nominal walk width40”48”Nominal pallet width32”40”Nominal pallet width32”40”2’-7 1/2”3’-3 3/8”Pallet width — A2’-7 1/2”3’-3 3/8”Inside to inside handrail — B3’-1 11/16”3’-9 9/16”Inside to inside handrail — B3’-1 11/16”3’- 9 9/16”Centerline to centerline handrail — C3’-4 7/8”4’-0 3/4”Centerline to centerline handrail — C3’-4 7/8”4’- 0 3/4”Outer deck to outer deck — D4’-4 3/4”5’-0 5/8”Outer deck to outer deck — D4’-4 3/4”5’- 0 5/8”Wellway opening single unit — E4’-7 1/8”5’-3”Wellway opening single unit — E4’-7 1/8”5’-3”Wellway opening two adjacent units — E9’-0 1/4”10’-4”Wellway opening two adjacent units — E9’-0 1/4”10’- 4”21’-0”21’-0”Pit length — F ( 3/4” – 0”)16’-10 3/4”16’-10 3/4”– 0”)19’-4 1/4”19’-4 1/4”328’328’12 pit length — F ( 3/4” – 0”)18’-0 1/2”18’-0 1/2”30’-6”24’-7”Pallet width — A10 pit length — F ( 3/4” – 0”)11 pit length — F( 3/4”Maximum rise — H10 edge to edge of supports — L ( 1/4”)*(H 0.1795’) x 5.6713 16’-2 5/16”11 edge to edge of supports — L ( 1/4”)*H x 5.1446 16’-2 5/16”12 edge to edge of supports — L ( 1/4”)*(H – 0.1795’) x 4.7046 16’-2 5/16”Maximum edge to edge of supports — L ( 1/4”)*1853’-5 3/4”Schindler Elevators, Escalators and Moving Walks49’-2 1/2”Maximum edge to edge of supports — LNotes:– In case of outdoor installations, a water drain should be provided.– Dimensions are for applications in the United States. Some dimensions change forseismic applications. For specific requirements in Canada, please consult your local salesoffice. Schindler Elevator Corporation reserves the right to change dimensions.Keys:* If L max, intermediate support is required. Please contact your local Schindler salesoffice for reaction and location.Visit www.us.schindler.com for the latest information and drawings
Schindler 9700 escalatorfor high requirement and high rises Stylish and at home in any environmentThe Schindler 9700 escalator system has design features that include:– Two, three and four flat step configurations to meet special building designand traffic requirements– Unprecedented choice of colors for handrails, steps, skirt panels, decking,and more– Advanced gear technology, setting new levels of quietness and smoothness of operation– Two step widths for optimal passenger flow and space requirements– Exceptionally tough 1/2” stainless steel sandwich panels providing inclinedbalustrades with outstanding durability– Mechanical components designed to meet the extreme demands ofpublic transit operations, regardless of environmental conditions– Weatherproofing options allow outdoor operation in virtually any climate– Over two dozen important safety features– Schindler’s optional ECOLINE* packages deliver significant energy savings.* Where applicable by code.Schindler 9700 AE ElevationH 1/4”EDABCL 1/4”30 Notes:– Dimensions are for applications in the United States. Some dimensions changefor seismic applications. For specific requirements in Canada, please consultyour local sales office. Schindler Elevator Corporation reserves the right tochange dimensions.Keys:* Higher rises may be available; please contact your local sales representative.F 3/4”Schindler 9700Model 9700-20 two flat stepsUpper transition radiusSize 1 and 2801004’-11 1/16” 4’-11 1/16”Size 3801004’-11 1/16” 4’-11 1/16”Size 1 and 2801008’-10 5/16” 8’-10 5/16”Model 9700-30 three flat stepsUpper transition radiusSize 3801008’-10 5/16” 8’-10 5/16”Lower transition radius3’-3 3/8”3’-3 3/8”3’-3 3/8”3’-3 3/8”Lower transition radius6’-6 3/4”6’-6 3/4”6’-6 3/4”6’-6 3/4”Step width — A2’-7 1/2”3’-3 3/8”2’-7 1/2”3’-3 3/8”Step width — A2’-7 1/2”3’-3 3/8”2’-7 1/2”3’-3 3/8”Inside to inside handrail — B3’-6 5/8”4’-2 1/2”3’-6 5/8”4’-2 1/2”Inside to inside handrail — B3’-6 5/8”4’-2 1/2”3’-6 5/8”4’-2 1/2”Centerline to centerline handrail — C3’-9 3/4”4’-5 5/8”3’-9 3/4”4’-5 5/8”Centerline to centerline handrail — C3’-9 3/4”4’-5 5/8”3’-9 3/4”4’-5 5/8”4’-10 11/16”5’-6 1/2”5’-2 9/16”5’-10 1/2”Outer deck to outer deck — D4’-10 11/16”5’-6 1/2”5’-2 9/16”5’-10 1/2”5’-1”5’-8 7/8”5’-4 1/2”6’-0 13/16”Wellway opening single unit — E5’-1”5’-8 7/8”5’-4 1/2”6’-0 13/16”Wellway opening two adjacent units — E9’-11 11/16”11’-3 7/16”10’-7 3/4”11’-11 3/16”Wellway opening two adjacent units — E9’-11 11/16”11’-3 7/16”10’-7 3/4”11’-11 3/16”3/4”15’-1 1/8”15’-1 1/8”15’-1 1/8”15’-1 1/8”3/4”17’-2 11/16”17’-2 11/16”17’-2 11/16”17’-2 11/16”H x 1.732 16’-2 7/16”Outer deck to outer deck — DWellway opening single unit — EPit length — F ( – 0”)Edge to edge supports — L ( /-1/4”)Pit length — F ( – 0”)Edge to edge supports — L ( /-1/4”)H x 1.732 20’-9 1/8”Notes:– Nominal rise according to A17.1 with A 1000 mm.– Size 1: max. 16 m, Size 2: max. 22 m, Size 3: max. 30 m.– Dimensions are for single drive configurations.– Please contact Schindler for dimensions relating to truss extensions, double drives,drive units in cages, PLC controls and rises above 16 m.Visit www.us.schindler.com for the latest information and drawingsSchindler Elevators, Escalators and Moving Walks19
Schindler sales 494KentuckyLexingtonLouisvilleLouisianaBaton RougeNew OrleansLake 10-401-2090812-282-6900812-282-6900For further information contact theSchindler office nearest you or ownHarrisburgPhiladelphiaPittsburghPuerto RicoSan JuanRhode IslandProvidenceSouth lleTexasAustinBeaumontDallas, Toll-FreeFort WorthHoustonSan Antonio, Toll-FreeUtahSaint GeorgeSalt Lake CityVermont, Toll-FreeVirginiaRichmondRoanokeVirginia BeachWashingtonPascoSpokaneSeattleWest 0CanadaAlbertaCalgaryEdmontonBritish ColombiaVancouverOntarioHamilton, Toll-FreeOttawaTorontoQuebecMontrealSchindler is a member organization of theU.S. Green Building 8-8171613-727-1289416-332-8280514-737-7367 Schindler Elevator CorporationHawaiiHonoluluIdahoBoiseIllinoisChicago DowntownChicago SuburbanSpringfieldIndianaIndianapolisFort WayneEvansvilleSouth BendIowaDes nchorageArizonaTucsonPhoenixArkansasLittle RockCaliforniaFresnoIrvineLos AngelesSacramentoSan DiegoSan FranciscoSan rict of husettsBostonSpringfieldMichiganAnn ArborDetroitGrand RapidsJacksonKalamazooLansingUpper ouriColumbiaNorth Kansas CitySt. LouisMontanaMissoulaNebraskaOmahaNevadaLas VegasRenoNew HampshireBoston, MANew JerseyNorth Jersey, Toll-FreeSouth JerseyNew MexicoAlbuquerqueNew YorkAlbanyBuffaloNew York CityLong IslandPougkeepsieRochesterSyracuseWestchester, Toll-FreeNorth CarolinaCharlotteGreensboroRaleighNorth DakotaFargoOhioAkron/Canton, doOklahomaOklahoma CityTulsaSchindler has received renewal to ISO 14001:2004and ISO 9001:2008 certificates.Schindler prints with vegetable-based ink onpaper containing post-consumer waste fiber.SWN-13United States
Schindler was the first North American elevator company to achieve the internationally recognized quality standards of ISO 9001 certification over twenty years ago. Today, we continue our commitment through renewal certificates to ISO 9001:2000 and ISO 9001:2008 standards. In 2005, Schindler was recognized by Lloyd’s
the Schindler offi ce nearest you, please contact: U.S. Headquarters. Morristown, New Jersey Tel. 973.397.6500 www.us.schindler.com Canada Headquarters. Scarborough, Ontario Tel. 416.332.8280 www.ca.schindler.com Schindler has received renewal to ISO 14001:2004 and ISO 9001:2008 certifi cates. Schindler is a member organization of the
Schindler Modernization and Schindler Service are available for all buildings, all brands. Destination, please Schindler revolutionized the industry with the introduction of the Miconic 10 destination-dispatch elevator system which eliminates pushbuttons in elevators and dramatically improves traffi c handling.
pride in its 30-year relationship with Schindler. In its 140-year history, the Schindler Group has grown from a local manufacturer of machines into a global elevator and escalator business. Today, Schindler is one of the world’s leading providers of elevators, escalators, and moving walks. Schindler manufactures, installs, services
patent for elevators without a machine room, the Miconic 10 hall call desti-nation system, the Schindler ID personalized access control system, the Schindler 7000 global high-rise elevator, the fully synthetic aramid rope and modern traction belt technology. Schindler will systematically pursue the aforementioned strategy in order
Greg Ergenbright, president of Schindler U.S. and Canadian operations Schindler won the Digital Business Innovation Award 2015 for its ‘Digital Toolcase’ – an application that is used by more than 20,000 Schindler front-line employees every day to access technical data, analyze errors or order parts6. The company also won the MIT Sloan
more efficient drive systems, components requiring less power, and intelligent power management software. We call it the Schindler E3 energy-saving approach. E3 - Schindler's unique energy-saving approach E1 - Efficient Drive System With state-of-the-art drive technology, the Schindler premium package increases total drive efficiency by up .
Schindler's Destination Interface is a proven technology used in buildings around the world. It quickly and easily converts your conventional elevator controls to Schindler's PORT Technology destination dispatching. When you modernize your elevators with Schindler's Destination Interface, you are creating
Schindler ID is the latest evolution of Schindler's world-renowned Miconic 10 destination control system, already proven successful in landmark buildings in over 40 countries. A new, revolutionary era has started — the user and the elevator can communicate with each other. Personalized Schindler ID provides a wide variety of applications
