RAUVITHERM AND RAUTHERMEX - Rehau Group
RAUVITHERM AND RAUTHERMEXParts List
CONTENTS11.11.21.3RAUTHERMEXRAUTHERMEX pipeRAUTHERMEX ShroudsRAUTHERMEX House Entries334722.12.22.3RAUVITHERMRAUVITHERM pipeRAUVITHERM Shroud KitsRAUVITHERM House Entries121213153Special Accessories194REHAU EVERLOCTM Jointing Technology205Installation Aids312
1RAUTHERMEX SDR 111.1 RAUTHERMEX SDR 11Colour:- Suitable up to max . 95 C (short bursts) and 6 bar- Delivery: in coils- Carrier pipes: cross-linked polyethylene (PE-Xa)according to DIN 16892/93 and DIN EN 15632with orange oxygen diffusion barrier (EVOH) inaccordance with DIN 4726- Continously foamed CFC-free insulation (except for160mm straight lengths)- Outer jacket: grey, corrugated, seamlessly extrudedpolyethylene (PE-LLD)Light greyArticle 0 20/11125 25/11132 32/11132 32/12640 40/12640 40/14250 50/16250 50/18263 63/18263 63/20275 plusplusplusD U-valueDDssdddsVolume 2.8 m x 0.8 m 2.8 m x 1.2 40040040030530522515086867575Pre-insulated pipeProperties:*12 m straight lengths3
1.2RAUTHERMEX Shroud KitsRAUTHERMEX T-shroud for BranchesProperties:Comprising:- To adapt the T-shroud to different RAUTHERMEXouter jacket diameters, 3 sealing rings of thecorresponding size must be used.- The REHAU shroud foam to be used for insulation- Shroud set made from ABS (76 - 126 or 76 - 182)- Clips made from POM (16 or 27)- Shroud plugs made from POM including valve,sealing ring and plug (3)- Shroud glue (1)- Assembly instructionsArticle No.Description330055-001351054-001NEW T - shroud small Generation IIIT - shroud largeOuter JacketdminmmOuter 37404155002.817811Outer JacketdminmmOuter 22.24.511RAUTHERMEX I-shroud for Straight ConnectionsProperties:Comprising:Article No.330056-001352038-0014- To adapt the I-shroud to different RAUTHERMEXouter jacket diameters. 2 sealing rings of thecorresponding size must be used- The REHAU shroud foam to be used for insulation- Shroud set made from ABS (76 - 126 or 76 - 182)- Clips made from POM (12 or 22)- Shroud plugs made from POM including valve,sealing ring and plug (2)- Shroud glue (1)- Assembly instructionsDescriptionNEW I - shroud small Generation IIII - shroud large
RAUTHERMEX L-shroud for Elbow ConnectionsProperties:Comprising:Article No.330057-001352039-001- To adapt the L-shroud to different RAUTHERMEXouter jacket diameters, 2 sealing rings of thecorresponding size must be used- The REHAU shroud foam to be used for insulation- Shroud set made from ABS (76 - 126 or 76 - 182)- Clips made from POM (14 or 22)- Shroud plugs made from POM including valve,sealing ring and plug (2)- Shroud glue (1)- Assembly instructionsDescriptionOuter JacketdminmmOuter 21821.040.90.820.880.780.58111111NEW L-shroud small Generation IIIL-shroud largeRAUTHERMEX Sealing Rings - smallApplication: To seal the shroud kit to the RAUTHERMEX pipeProperties: - Every branch of the shroud is to be sealed off with thematching sealing ring- Inner diameter of sealing ring Outer diameter of thepipeMaterial:- EPDM- Stainless steel clamping stramp- Hard plastic ringArticle No.Description330017-001330018-001330019-001NEW 91 mm, suitable for Shroud smallNEW 111 mm, suitable for Shroud smallNEW 126 mm, suitable for Shroud smallRAUTHERMEX Sealing Rings - largeArticle 001351062-001Description91 mm, suitable for Shroud large111 mm, suitable for Shroud large126 mm, suitable for Shroud large142 mm, suitable for Shroud large162 mm, suitable for Shroud large182 mm, suitable for Shroud largePre-insulated pipeApplication: To adjust the shroud kit to the RAUTHERMEX pipeProperties: - Every branch of the shroud is to be sealed off with thematching sealing ring- Inner diameter of sealing ring Outer diameter of thepipeMaterial:EPDM5
REHAU Shroud FoamApplication:Comprising:Note:For the installation of RAUTHERMEX shrouds andREHAU shrink shrouds- Foam bottle component A- Foam bottle component B- Nozzle cap- Assembly instructionsPlease observe the assembly instructions and safetyinstructions and datasheetsArticle No.DescriptionSuitable forRAUTHERMEX ShroudSuitable forShrink Sleeve298357-001209596-001352413-001351063-001Size 5Size 6Size 8Size 9.1RTX I- and L-shroud smallRTX T-shroud smallRTX I- and L-shroud largeRTX T-shroud largeShrink sleeve I smallShrink sleeve L smallShrink sleeve I largeShrink sleeve T largeRAUTHERMEX Coupling Shroud Sets - Special ApplicationsApplication:Comprising:Article ckQtypcLFor connecting RAUTHERMEX and/or steel pre-insulated pipes- PE-moulding- Abrasive belt- Heat-shrink sleeves/tape- Air bleeding valves- Polyurethane foamDescriptionSpecial application 182/200 mmSpecial application 182/250 mmSpecial application 202/225 mmSpecial application 202/250 mmSpecial application 250/250 mmOuter JacketdminmmOuter 2502506006006006006003.83.9411111
1.3House Entries RAUTHERMEXREHAU Pre-fabricated Pipe 16290/162110/162125/182160/25025 25/11132 32/11140 40/12650 50/16263 63/18275 .6111111Pre-insulated pipeDescriptionDUO250Article No.UNO1100250Comprising:- Suitable up to max. 95 C (short bursts) and 6 bar- Elbow in outer jacket made up of segmentsbutt-welded to create a bend.- Pipe bend length: 1100 mm x 1600 mm- Leg lenth at: 160/250, 1500mm x 1500mm- Exposed pipe ends: 250 mm- Pre-curved carrier pipe made of cross-linkedpolyethylene (PE-Xa) in accordance toDIN 16892/93. DIN EN 15632 and oxygendiffusion barrier (EVOH) according to DIN 4726- Insulation made from CFC-free, pentane drivenpolyurethane rigid foam- Outer jacket pipe: PE-HD black1600Properties:7
RAUTHERMEX Pre-fabricated Steel Pipe Bend (Steel)Properties:- Suitable up to max. 95 C (short bursts) and 6 bar- Bend Length: 1100 mm x 1100 mm- Carrier pipes- Insulation- Outer jacket- Two welded REHAU couplers with dimensions140 x 12.7 mm / 160 x 14.6 mm- Two REHAU compression sleeves- Carrier pipes: Steel- Insulation: CFC-free polyurethane rigid foam- Outer jacket: PE-HD blackComprising:Material:Article No.209138-001201227-001DescriptionDimension Coupler140/225 mm, steel160/250 mm, steelDimension CompressionSleeve140 x 12.7 - 139.7 x 3.6160 x 14.6 - 168.3 x 4.1140 x 12.7160 x 14.6dWeightmmkg/pcPackQtypc225250708011Wall Sealing Ring (Dry)Article tion91/133 mm111/153 mm126/168 mm142/183 mm162/203 mm182/223 mm202/234 mm225/261 mm250/286 mm*plus insulation**plusplus 168183203223234261286DaDApplication: Suitable as a building inlet through masonry, inconjunction with expansive mortar for non-pressuredwater. Watertight up to 2m water columnMaterial:Profiled natural rubberColour:Black (RAL 9005)50RTX UNO25, 32, 4032*, 5040*,50*, 6363*75, 90, 11090*,110*, 125125*, 140, 110**for lead in bend 140/225160RTX DUO25,3232*,4040*5050*,6363*,75RVT UNO25,324050,637590,110125RVT 0.80.911.1111111111
RAUTHERMEX Wall Sealing RIng FA 80Application:Properties:Comprising:Article 001285481-001219376-001298812-001Suitable as a seal through concrete and in the casingpipe through masonry where water pressure exists(up to 15m water column) in combination withRAUTHERMEX- For secure sealing and adequate stabilisation of thepipe, the wall sealing ring FA80 in a feed throughduct is also reccommended- Width: approx. 90 mm- Seal rubber EPDM Shore 40 5 - Seal plates and screws made of 2162182202250510101010101010SWCore Holes 11111111SWCore Holes 0722.0661.6681.472.432.4883.4725.10211111111* 2** 3RAUTHERMEX Wall Sealing Ring FA 40Properties:Comprising:Suitable as a seal through concrete and in the casingpipe through masonry where water pressure exists(up to 15m water column) in combination withRAUTHERMEX- For adequate stabilisation of the pipes, two wallsealing flanges FA 40 in a feed-through duct arerecommended.- Width: approx. 50 mm- Seal rubber EPDM Shore 40 5 - Seal plates and screws made of V2A- Seal rubber in accordance with KTWrecommendationArticle 013131313131313Pre-insulated pipeApplication:9
RAUTHERMEX Casing PipeArticle -001Pipe sleeve 125 (131 x 3.0)Pipe sleeve 150 (160 x 5.0)Pipe sleeve 200 (210 x 5.0)Pipe sleeve 250 (280 x 15)IDADApplication: Suitable for wall sealing rings FA 40 and FA 80Properties: - Heavily roughened surface for sealing securely againstmasonry or concrete- Casing pipe can be embedded in concrete togetherwith formwork supports in concrete building htkg/pcPackQtypc1.41Pipe Sleeve Protective CapArticle -001for casing pipe sleeve 125 mmfor casing pipe sleeve 150 mmfor casing pipe sleeve 200 mmfor casing pipe sleeve 250 mmIDADApplication: For fixing the casing pipes in concrete wall formworkMaterial:PE-LDColour:YellowEpoxy Resin KitApplication:Properties:Comprising:For sealing the concrete or masonryNote: Please observe the assembly instructions andsafety datasheets- Two component epoxy resin- Brush (length: aprox. 40 cm)- 1 pair of latex gloves- Assembly instructionsArticle No.Description222854-001Coverage for 3.5m area102
RAUTHERMEX Rubber End CapApplication: Suitable for the protection of foamed pipe ends frommoistureMaterial:EPDMRAUTHERMEX Heat-shrink End Cap 02125/182125/202140/202160/250DUO20 20/11125 25/11132 32/11132 32/12640 40/12640 40/14250 50/16250 50/18263 63/18263 63/20275 75/202Rubber End CapHeat-shrink End 001Pre-insulated pipeApplication: Suitable for protecting foamed pipe ends againstmoistureMaterial:Shrinkable PE-X coated with glue11
2RAUVITHERM SDR 112.1 RAUVITHERM SDR 11Colour:- Suitable for up to max. 95 C (short bursts) and 6bar- Delivery: in coils- Carrier pipes- Insulation- Outer jacket- Carrier pipes: cross-linked polyethylene (PE-Xa) inaccordance with DIN 16892/93 and DIN EN 15632with orange oxygen diffusion barrier (EVOH) inaccordance with DIN 4726- Insulation: cross-linked PE foam sheets with DUOpipes and an additional white foam section- Outer jacket: Black, corrugated outer jacket madeof polyethylene (PE-LLD)BlackArticle 0125/210140/220160/25025 25/15032 32/15040 40/15050 50/17563 63/210DDssdProperties:ddsDU-valueVolumeMax. coil 16010010012m lengths12m 093.1324.396260260260160110
2.2RAUVITHERM Shroud KitsT-Shroud SetProperties:Comprising:Article No.330024-001330025-001- To fit the respective RAUVITHERM pipe outer jacketdiameter to the T-shroud, please use the steppedend sections.- For the insulation, use RAUVITHERM foam sets- PE- shroud- Heat-shrink sleeves- Ventilation plugs- Screws- Sealing tape- Assembly instructionsDescriptionOuter JacketdminmmOuter 07905306442.7385.611Outer JacketdminmmOuter 01.654.1111Outer JacketdminmmOuter 02.5611NEW T-Shroud set smallNEW T-Shroud set largeI-Shroud SetProperties:Comprising:Article No.330068-001330069-001- To fit the respective RAUVITHERM pipe outer jacketdiameter to the I-shroud, please use the steppedend sections- For the insulation, use RAUVITHERM foam sets- PE- shroud- Heat-shrink sleeves- Ventilation plugs- Assembly instructionsDescriptionNEW I-Shroud set smallNEW I-Shroud set largeProperties:Comprising:- To fit the respective RAUVITHERM pipe outer jacketdiameter to the L-shroud, please use the steppedend sections- For the insulation, use RAUVITHERM foam sets- PE- shroud- Heat-shrink sleeves- Ventilation plugs- Screws- Assembly instructionsArticle No.Description330026-001330027-001NEW L-Shroud set smallNEW L-Shroud set largePre-insulated pipeL-Shroud Set13
REHAU Shrink SleeveApplication: For repair of RAUVITHERM or RAUTHERMEX pipe aswell as RAUVITHERM T-, I- and L-ShroudsArticle eightmmg/mPackQtym3304007929650.330.4Suitable for RAUTHERMEX ShroudSuitable for Shrink SleeveWeightkg/pcPackQtyStRTX T-shroud largeRTX I- and L-shroud smallRTX I- and L-shroud largeRTX T-shroud smallShrink sleeve T smallShrink sleeve T largeShrink sleeve I smallShrink sleeve I largeShrink sleeve L smallShrink sleeve L large1.3982.2120.8751.7121.0551.862111111300 mm width, 970 mm lengthREHAU Repair KitsArticle No.297991-033297992-040Description330mm(w) heat-shrink sleeve (S)440mm(w) heat-shrink sleeve (L) (also used for district heating chamber)REHAU Shroud FoamApplication:Comprising:Hinweis:For the installation of the RAUTHERMEX shroudsand REHAU heat-shrink shrouds- Foam bottle component A- Foam bottle component B- Nozzle cap- Assembly instructionsPlease observe the assembly instructions and safetydatasheetsArticle -001209596-001304766-001Size 7Size 9.1Size 5Size 8Size 6Size 8.114
RAUVITHERM House EntriesREHAU Pre-fabricated Pipe BendUNO1100Comprising:Article 43788-001- Suitable up to max. 95 C (short bursts) and 6 bar- Elbow in outer jacket made up of segmentsbutt-welded to create a bend.- Pipe bend length: 1100 mm x 1600 mm- Leg lenth at: 160/250. 1500mm x 1500mm- Exposed pipe ends: 250 mm- Pre-bent carrier pipe made of cross-linkedpolyethylene (PE-Xa) in accordance toDIN 16892/93. DIN EN 15632 and oxygendiffusion barrier (EVOH) according to DIN 4726- Insulation made from CFC-free, pentane drivenpolyurethane rigid foam- Outer jacket pipe: PE-HD 9150/11163/12675/16290/162110/162125/182160/25025 25/11032 32/11040 40/12550 50/16063 VT DUOWeightkg/pcPackQtypc2.574.76.72111Wall Penetrations for Pressured Water (with rough outersurface)Comprising:Article No.- Watertight to 2m water column- for direct installation with expansive mortar orconcreted in- PVC wall sleeve- Heat-shrink sleeveDescriptionDRVT UNOmm320800-001320801-001320802-001Casing diameter 120Casing diameter 150,175,190Casing diameter 21016022528025, 32, 4050, 63125,140, 11025, 32, 4063Pre-insulated pipeProperties:15
Wall Penetrations for Pressure Water (including compact sealingring)Properties:Comprising:- Watertight up to 2m water column.- For direct installation in a tapping drill hole- PVC wall sleeve- Heat-shrink sleeve- Compact sealing ringArticle No.DescriptionDRVT UNORVT DUOWeightmm370800-001370801-001370803-001Casing diameter 120 with KDCasing diameter 150,175,190 with KDCasing diameter 210 with KD25030035025, 32, 4050, 63125,140,11025, 32, 4063kg/pcPackQtypc5.367.9511.32111Wall Sealing Ring (Dry)Article -001239101-001353278-001111/153 mm126/168 mm142/183 mm162/203 mm182/223 mm202/234 plication: Suitable as a building inlet through masonry. inconjunction with expansive mortar for non-pressuredwater. Watertight up to 2m water columnMaterial:Profiled natural rubberColour:Black (RAL 9005)50RTX UNORTX DUORVT UNO32*, 5040*, 50*,6363*75, 90, 11090*, 110, 125125*, 140, 110**25,3232*, 4040*5050*, 6363*,7525, 324050, 637590, 110125RVT ghtmmmPackQtypc2400.125125, 32, 40Weight*plus insulation**plusplus insulationRAUVITHERM Sealing TapeApplication: Suitable for sealing the gap between the wall sealingring and RAUVITHERM pipeMaterial:Butyl rubberArticle No.353277-00116DescriptionSealing tape for RAUVITHERM house entries
RAUVITHERM Rubber End CapApplication: Suitable for the protection of foamed pipe ends frommoistureMaterial:EPDMRAUVITHERM Heat-shrink End Cap /175110/190125/210DUO25 25/15032 32/15040 40/15050 50/17563 63/210Rubber End CapHeat-shrink End 001209966-001209967-001209968-001Pre-insulated pipeApplication: Suitable for protecting foamed pipe ends againstmoistureMaterial:Shrinkable PE-X coated with glue17
18
3Special AccessoriesDistrict Heating ChamberApplication: Multi-functional district heating chamber for allconnections d20 - d110 or fixturesProperties: - Cover and protect REHAU pipe connections, isolationvalves or branches- Including stainless steel screw connections for thewatertight and permanent connection of the cover andmain body of the chamber--Note: Please check the space requirements for fittingsfor each individual chamberMaterial:PEColour:BlackArticle tmmmg/mPackQtym365150.DH chamber d 800REHAU Pre-insulated Y-pipe, SDR 11Comprising:Article 001314944-001- Suitable up to max. 95 C (short bursts) and 6 bar- Total Length: 1.8 m- Exposed pipe ends: 250 mm- Carrier pipes made of cross-linked polyethylene(PE-Xa) accordng to DIN 16892/93. DIN EN 15632and oxygen diffusion barrier (EVOH) to DIN 4726- Insulation made with CFC-free, pentane drivenpolyurethane foam- Outer jacket: PE-HD black- Elbow in outer jacket made of butt-weldedsegmentsDescription2 x UNO 25/91 to DUO 25 25/1112 x UNO 32/91 to DUO 32 32/1112 x UNO 40/91 to DUO 40 40/1262 x UNO 50/111 to DUO 50 50/1622 x UNO 63/126 to DUO 63 63/1822 x UNO 75/142 to DUO 75 75/225Pre-insulated pipeProperties:REHAU District Heating Pipes Warning TapeApplication: For marking the location of RAUTHERMEX andRAUVITHERM pipes. It should be installed approx. 40cm above the pipes. The tape reads Caution CautionCaution District Heating pipes below“Colour:YellowArticle No.Description311150-001365m Warning tape19
4REHAU EVERLOCTM Jointing Technology. SDR 11Compression Sleeve. SDR 11aApplication: For sliding on REHAU EVERLOCTM compression sleevefitting SDR 11 in conjunction with RAUPEX,RAUTHERM, RAUTHERMEX, RAUVITHERM andRAUGEO Pipe SDR 11Material:Brass (LX) or Gunmetal (RG)bArticle 7691-002235229-002206256-002234324-00220 x 1.9/2.025 x 2.332 x 2.940 x 3.750 x 4.663 x 5.875 x 6.890 x 8.2110 x 10.0125 x 11.4140 x 12.7160 x 53535353WeightPackQtypc20 21.8 g/pc3040 g/pc4080 g/pc49 131 g/pc61 260 g/pc74 390 g/pc90 500 g/pc108 520 g/pc130 1.09 kg/pc145 1.597 kg/pc163 1.8 kg/pc185 2.45 kg/pc1005050252525111111Straight Coupler SDR 11Application: REHAU EVERLOCTM compression fitting with mouldedsupport ridges for use with RAUPEX, RAUTHERM,RAUTHERMEX, RAUVITHERM and RAUGEO Pipe SDR11 and compression sleeves SDR 11Material:Brass (LX) or Gunmetal (RG)Article 5219-001206257-001234334-00120Description20 x 1.925 x 2.332 x 2.940 x 3.750 x 4.663 x 5.875 x 6.890 x 8.2110 x 10125 x 11.4140 x 12.7160 x htPackQtypc2062 g/pc2593 g/pc32 177 g/pc40 380 g/pc50 570 g/pc63 940 g/pc75 1.48 kg/pc90 2.4 kg/pc110 3.12 kg/pc125 4.5 kg/pc1405 kg/pc160 5.5 kg/pc10103511111111mm
Reducing Coupler SDR 11zApplication: REHAU compression fitting with moulded support ridgesfor use with RAUPEX, RAUTHERM, RAUTHERMEX,RAUVITHERM and RAUGEO Pipe SDR 11 and compression sleeve SDR 11Material:Brass (LX) or Gunmetal (RG)azArticle 1267661-001Description25 - 2032 - 2540 - 2040 - 3250 - 3250 - 4063 - 5075 - 6390 - 75110 - 13713722232828182832323636WeightPackQtypc70 g/pc140 g/pc260 g/pc280 g/pc410 g/pc480 g/pc760 g/pc1.4 kg/pc1.7 kg/pc3.1 kg/pc10355111111Pre-insulated pipea21
T-Piece SDR 11z1baz1z3cz3bbz2z2z1caacz3bz2z1aArticle No.DescriptionEqual tee169045-00120 - 20 - 20169056-00125 - 25 - 25169063-00132 - 32 - 32169072-00140 - 40 - 40169156-00150 - 50 - 50169167-00163 - 63 - 63221946-00175 - 75 - 75221948-00190 - 90 - 90221953-001110 - 110 - 110Tee on end and branch reduced169049-00125 - 20 - 20169060-00132 - 25 - 25169070-00140 - 32 - 32169151-00150 - 25 - 40169153-00150 - 32 - 40169160-00163 - 32 - 50169162-00163 - 40 - 40169163-00163 - 40 - 50169165-00163 - 50 - 50221935-00175 - 32 - 63221938-00175 - 50 - 63221943-00175 - 63 - 63Tee branch reduced169053-00125 - 20 - 25169059-00132 - 20 - 32169061-00132 - 25 - 32169068-00140 - 20 - 40169069-00140 - 25 - 40169071-00140 - 32 - 40169077-00150 - 20 - 50169152-00150 - 25 - 50169154-00150 - 32 - 50169155-00150 - 40 - 5022Typez3z2Application: REHAU EVERLOCTM compression fitting with mouldedsupport ridges for use with RAUPEX, RAUTHERM,RAUTHERMEX, RAUVITHERM and RAUGEO Pipe SDR11 and compression sleeve SDR 11Material:Brass (LX) or Gunmetal 3486267768725 135 g/pc29 200 g/pc30 400 g/pc43 770 g/pc49 870 g/pc59 2.35 kg/pc67 2.7 kg/pc764 kg/pc876 853555555596162262536424149495050384855165 g/pc259 g/pc580 g/pc820 g/pc720 g/pc1.2 kg/pc1.5 kg/pc1.6 kg/pc1.6 kg/pc2.1 kg/pc2.4 kg/pc2.5 30344135184 g/pc290 g/pc310 g/pc580 g/pc670 g/pc700 g/pc810 g/pc830 g/pc820 g/pc900 g/pc10331111111
Description244432-00163 - 20 - 63169159-00163 - 25 - 63169161-00163 - 32 - 63169164-00163 - 40 - 63169166-00163 - 50 - 63221934-00175 - 25 - 75267791-00175 - 32 - 75221936-00175 - 40 - 75231326-00175 - 50 - 75221944-00175 - 63 - 75231336-00190 - 32 - 90221945-00190 - 40 - 90231346-00190 - 63 - 90231356-001110 - 32 -110221950-001110 - 50 - 110231366-001110 - 63 - 110Tee both ends reduced169047-00120 - 25 - 20267781-00163 - 75 - 63Tee one end reduced169055-00125 - 25 - 20169062-00132 - 32 - 8818230 1.323 kg/pc37 1.2 kg/pc35 1.2 kg/pc39 1.7 kg/pc52 1.882 kg/pc37 2.1 kg/pc42 2.1 kg/pc46 2.25 kg/pc52 2.5 kg/pc59 2.5 kg/pc423 kg/pc46 3.2 kg/pc59 3.8 kg/pc42 4.3 kg/pc52 5.3 kg/pc59 5.4 kg/pc1111111111111111LXLX4311350109431132863285928 160 g/pc63 1.69 52896-001301895-00140 - 25 - 3250 - 40 - 4063 - 25 - 5075 - 25 - 6375 - 40 - 6390 - 25 - 7590 - 32 - 7590 - 40 - 7590 - 50 - 7590 - 63 - 7590 - 75 - 75110 - 25 - 90110 - 32 - 90110 - 40 - 90110 - 50 - 90110 - 63 - 90110 - 75 - 90110 - 90 - 90125 - 125 - 125125 - 110 - 125125 - 90 - 125125 - 75 - 125125 - 63 - 125196 g/pc350 g/pcd1d3d2Application: Steel T-piece with welded-on compression sleeveadapter for use with Carrier pipes RAUTHERMEX andRAUVITHERM SDR 11Material:- T-piece: Steel- Compression sleeve: RGRGRGRGRGRGRGRGREHAU T-Piece, SDR 11 including compression sleevesArticle e-insulated pipeArticle No.23
Article -001125 - 50 - 125125 - 40 - 125125 - 32 - 125125 - 25 - 12590 - 25 - 9090 - 50 - 9090 - 75 - 90110 - 25 - 110110 - 40 - 110110 - 75 - 110110 - 90 - 110125 - 125 - 110125 - 110 - 110125 - 90 - 110125 - 75 - 110125 - 63 - 110125 - 50 - 110125 - 40 - 110125 - 32 - 1111111111111T-Piece, SDR 11 Steel, pre-insulatedMaterial:- Pre-insulated Steel T-piece including couplers withcompression sleeves- Straight branch (125)- Angled branch 45 (160)- Size 125 - requires RAUVITHERM I-Shroud large- T-piece: Steel- Compression sleeve: Gunmetal (Rg)- Insulation: CFC-free polyurethane foam- Outer jacket: Polyethylene (PE-HD)Article No.Description201411-001201413-001125 - 125 - 125160 - 160 - typc125160125160125160275011
T-Piece Branch with Female Thread. SDR 11Applicatio
352221-001 90/162 90 8.2 164 0.206 4.254 95 150 5.02 150 352925-001 90/182 plus 90 8.2 185 0.175 4.254 52 86 5.61 86 352231-001 110/162 110 10 164 0.296 6.362 95 150 5.78 150 352935-001 110/182 plus 110 10 185 0.236 6.362 52 86 6.64 86 356665-001 110/202 plusplus 110 10 202 0.2 6.362 46 75 7.29 75 352241-002 125/182 125 11.4 185 0.303 8.203 52 .
Manifold 1 (100.0 F) Manifold 2 (100.0 F) 6 7 REHAU EDGE AND YOU . – PRO-BALANCE manifold accessory set – Pipe cutter set Kits – RAUPANEL starter kit – RAUPLATE starter kit Training – Free seat at Skill Builders class Software – REHAU LoopCAD Pro license – REHAU LoopCAD Pro 1-year
beginning a radiant installation: radiant heating system design piping layout or pattern building drawings pertinent REHAU technical guidelines 2. Ensure site conditions are suitable for the installation of heat trans-fer panels (i.e., clear space to work and plywood or
Mit dem REHAU Portal für Innenausbau geben wir Ihnen exklusive Services und Tools an die Hand, damit Sie Ihre Projekte noch besser planen und zum Erfolg führen können. Wenn Sie möchten, werden wir sozusagen ein Teil Ihres Teams. Nutzen Sie unsere Manpower und unser Know-how – für eine Partner
tions SANS 10400 XA in 2011, every new building now needs to conform to the Energy Usage regulations as laid out in the Fenestration Section. REHAU’s range of uPVC windows and doors outperform these regulations. Whether you are building your dream home or renovating it,
ISO 4892-2, the sample is subjected to UV light-ing behind window glass under defined physical parameters. Simultaneously, a light sensitive scale is equally exposed. As soon as level 6 on the scale has been reached, the sample is compared to an unexposed sample (based on ISO 105-A02/A03). REHAU edgeband also resists saliva and sweat ac-
Source: 2016 Miami-Dade County Infant Mortality Analysis Highest Neighborhood Rates and Percentages. 31 21.6 23.7 26.26 37.84 41.84 42.28 43.74 50.7 54.06 58.9 64.56 68.34 77.04 0 20 40 60 80 100 Group F Group D Group N Group G Group B Group H Group C Group M Group J Group A Group E Group K Group I Percent p
U8 Whitecaps Jan Levius Monday (5:00 Group A / 6:00 Group B) Field 11A Thursday (5:00 Group A / 6:00 Group B) Field 10A U8 Sounders Greg George Tuesday (5:00 Group A / 6:00 Group B) Field 10A Wednesday (5:00 Group A / 6:00 Group B) Field 9B U8 Red Stars Ty Hesser Monday (5:00 Group A / 6:00 Group B) Field 10B Thursday (5:00 Group A / 6:00 Group .
Studies have shown veterinary surgeons do not feel they receive adequate training in small animal nutrition during veterinary school. In a 1996 survey among veterinarians in the United States, 70% said their nutrition education was inadequate. 3. In a 2013 survey in the UK, 50% of 134 veterinarians felt their nutrition education in veterinary school was insufficient and a further 34% said it .
