Amir A Zadpoor - ESBiomech

National events (selected from recent events) HighTechCafé, HighTechCentreDelft, 25 Jan 2016, Delft. Master tour of the student association Salus, Feb 2016, VU University, Amsterdam. Symposium OK Reinier de Graaf Groep, Reinier de Graaf Hospital, 19 May 2016, Delft. Tech for Health Exhib Cong, 6 Oct 2015, Den Bosch. Medical Delta 3D Cafe, 12 Feb 2015, Delft. Biocompatible Materials event, LURIS Tech Talk, 1 Oct 2015, Leiden.Chaired sessions Session: Metallic biomaterials, Metals in Biomedical Applications, 6th Int Conf Mech BiomaterTissues, 7 Dec 2015, Waikoloa, Hawaii, USA. Session: Biomedical and Natural Materials, Photomechanics 2015, 29 May 2015, Delft, TheNetherlands. Session: Bone Mechanics, 7th World Cong Biomech (WCB 2014), July 6-11, Boston, US. Session: Vascular mechanics, 7th World Cong Biomech (WCB 2014), July 6-11, Boston, US. Session: Computational mechanics of cells, tissues, and biomaterials, 5th. Euro Conf ComputMech (ECCM V), July 20-25, 2014, Barcelona, Spain. Session: Biomechanics 2, 20th Ann Meet Euro Orthop Res Soc (EORS 2012), Sep 26-28,Amsterdam, The Netherlands. Session: Implant Biomechanics IV, 18th Cong Euro Soc Biomech (ESB2012), July 1-4, Lisbon,Portugal. Session: 3D motion analysis-ground reaction force, Cong Int Soc Biomech (ISB 2011), 3-7 July,Brussels, Belgium. Session: Bone and cartilage, 3rd Dutch Bio-Medical Engineering Conference, 20-21st January,2011, Egmond aan Zee, The Netherlands.Membership ASME (Amer Soc Mech Eng) ESB (Europ Soc Biomech) Int Foot Ankle Biomech Community TMS (Minerals, Metals, and Materials Soc)Int Osteoporosis FoundFootwear Biomech GroupTeaching qualification University Teaching Qualification (Basiskwalificatie Onderwijs), valid for all Dutch universities.Teaching experiencePostgraduate Responsible instructor and course developer, Computational Mechanics ofTissues and Cells, TUDelft. Responsible instructor and course developer, Tissue Engineering, TUDelft. Responsible instructor and course developer, Selected Topics in TissueBiomechanics and Implants, TUDelft. Co-instructor and course co-developer, Experimental Design, Statistics and theHuman, TUDelft. Responsible instructor, Sheet Metal Forming, TUDelft. Guest lecturer, Orthopaedic Implants and Technology, TUDelft. Guest lecturer, Digital Manufacturing, TU Delft. Guest lecturer, Sheet Metal Forming, TUDelft.Undergraduate Responsible co-instructor and course co-designer, Musculoskeletal System andBiomechanics 2 (Spierskeletsysteem en Biomechanica 2), TUDelft Co-instructor, Biomechanics, BSc Minor: Medical Technology, TUDelft. Responsible instructor, Industrial Corrosion Eng, Shahid Abbaspour’s Univ(Kerman, Iran).Teaching assistantships Graduate Teaching Assistant, Mechanical Vibrations, Dept Biomed 20052005

Amirkabir Univ Tech.Teaching Assistant, Design of Machine Elements II, Dept Mech Eng, Iran UnivTech.Professional training courses Responsible instructor, training courses of “Technical computing usingMATLAB”, Dept Chem Eng, Iran Univ Sci Tech. Responsible instructor, training courses of “Air conditioning system design usingcomputers” for practicing engineers, several institutions200320032002-2005Current lab membersPostdocs Saber Amin Yavari, Anti-microbial surfaces for additively manufacturedporous biomaterials.Doctoral students Françoise Bobbert, Origami-based meta-biomaterials Yageng Li, Additively manufactured biodegradable metallic bone substitutes Juan Sebastián Cuéllar, Accessible prosthetics through 3D printing and asmartphone app. Nazli Sarkalkan, Cartilage defect detection using ultrasound techniques. Shahram Janbaz, Buckling and wrinkling: biofabrication using extrememechanics. Behdad Pouran, Physical properties of cartilage and bone in healthy anddiseased joints. Mohammad Ahmadi, Mechanical properties of porous bioinert/biodegradablebiomaterials. Parisa Rahnama Moshtagh, Cartilage regeneration and characterization. Vahid Arbabi, Etiology of osteoarthritis: application of patient-specific finiteelement models.Visiting PhD students Reza Hedayati, Computational and analytical approaches for analysis of themechanical properties of additively manufactured porous biomaterialsMSc students Dominique Fuchs, Modifying mechanical properties of peri-prosthetic fibrousmembrane using biochemical factors- an exploratory study Sander Dobbenga, Nanotopography-based regulation of stem cell date Coline Hammann, Nano-patterning of titanium using electron beam nanolithography Ingmar van Hengel, Evaluation of anti-bacterial coatings for additivelymanufactured porous titanium using animal models and in vitro assays Suvra Nath, Induced differentiation of mouse embryonic stem cells intocerebellar neurons Jochem Brandt, Patient-specific knee-sparing tumor endoprostheses for thedistal femur Matthijs Heeres, Origami-based biomaterials and their mechanical behavior Yoeri Sigterman, Mechanical behavior of additively manufactured structuresand materials (in collaboration with Stuttgart University). Chara Andriakopoulou, Dynamic mechanical characterization of hydrogels andcartilage (in collaboration with University of entLab alumniDoctoral students Gianni Campoli, Computational bone mechanics: the interrelationshipsbetween shape, density distribution, and loading, Graduated on 20 May 2014. Saber Amin-Yavari, Porous titanium for bone substitution: mechanobiology62010-20142011-2014

meets surface science, Graduated on 29 April 2014.Visiting doctoral students Zahra Gorgin, Anti-microbial surfaces for additively manufactured porousbiomaterials based on plasma electrolytic oxidation. Sami Väänänen, from Univ Eastern Finland, Mechanical testing of the femuraccompanied with 3D full-field strain measurement using digital imagecorrelation. Lorenzo Grassi, from Lund Univ, Measurement of full-field strain distributionduring fracture testing of cadaveric femora.Postdocs/researchers Saber Amin-Yavari, Effects of nanotopography on cell response in additivelymanufactured porous biomaterials Gianni Campoli, finite element modeling of the implanted shoulder joint Martina Cuschieri, Hydrogels for cartilage tissue engineering.MSc students Joep de Krijger, The effect of stress ratio on the fatigue behavior of additivelymanufactured porous biomaterials. Gerhard van Wolfswinkel, Inducible displacement of a knee implant - a finiteelement study and validation of a loose and fixed tibial component Françoise Bobbert, Permeability and mechanical properties of triply periodicminimal surface scaffolds for bone regeneration. Astrid Moerman, Histological and mechanical characterization of interfacetissue between bone and loose orthopedic prostheses. Joaquin V.V. Jorgge, Effect of bath condition on the diffusion of contrastagents across articular cartilage. Asimina Glynou, Design of a mechanical loading device for studying the loaddependent transport of solutes across articular cartilage in a micro-CT chamber. Axel Scheele, Can peak stresses in patient specific finite element models of totalknee prostheses predict tibial component migration measured byradiostereometric analysis? Paolo Sànchez, Microstructural model of the collagen fibril using finite elementmethod. Josip Rauker, Measuring Young’s modulus of 20LP10L20-LLA40 microspheresand gelatin-methacrylamide (GelMA) hydrogels using nano-indentation. Nazli Sarkalkan, Statistical appearance models for fast and automatedestimation of proximal femur fracture risk using finite element models. Pauline Roels, Understanding the development of cam-type deformity by FEanalysis of the immature proximal femur. Sven van den Munckhof, Subject-specific femoral fracture prediction by finiteelement modeling. Magaly Reyes Lua, Prediction of the elastic strain limit of tendons. Sophie Borleffs, Finite element modeling to predict bulk mechanical propertiesof metal foams produced by 3d printing. Sander Poelert, Thermal fluctuations of anisotropic semiflexible polymers.20152010-2012(two 010-2011Visiting MSc students Suzan Bsat, Effect of alkali-acid-heat chemical surface treatment on electronbeam melted porous titanium and its apatite forming ability (visiting studentfrom Carleton University, Canada)2014 Alessandro Antico, exchange student, Univ Bologna (Italy), Computer aideddesign and finite element modeling to predict bulk mechanical properties ofbone scaffolds using triply periodic minimal surfaces.20137

BSc students M.M. Ackermans, T.N.J. Geelen, C.J. van der Ploeg, L. van Roessel, The effectsof thermal cycles on the mechanical behaviour of high performance materials. Dennis van der Geest, Vincent van der Knaap, Thijs van Winden, and YvoPutter, Correlation between ultrasound wave response and cartilage damage Peter Jamar, Steven Deen, Michel Tamarzians, Frederike Geesink, Optimaldesign parameters for detection of cartilage damage with ultrasound. Cosupervised with Dr. Gabrielle Tuijthof. Bob Schouten, Elias Dahlgren, Timothy Jessurun, Mohamed Boumzaouad,determining the environmental factors that influence the detection of cartilagedamage with ultrasound. Co-supervised with Dr. Gabrielle Tuijthof. Ana Rita Soares, exchange student from University of Lisbon, Biofabrication ofhydrogels for cartilage tissue engineering and mechanical characterization of thefabricated hydrogels. Jeroen Kremer, Jos Vroon, Arjan Scheerhoorn, Arnoud Delissen, Finiteelement modeling of large deformation of fatty tissue in an eye model. Cosupervised with Prof. Huib Simonsz and Prof. Fred van Keulen. Bjorn Vennema, Giovanni Mores, Jan Wessels, Teun Koomen, Application ofcomputational ultrasound for detection of small cartilage lesions in the anklejoint. Co-supervised with Dr. Gabrielle Tuijthof. Wouter Roobeek, Elise Buiter, Goof van de Weg, Thijs Bosma, Determinationof the smallest size of osteochondral defects that can be detected usingultrasound. Co-supervised with Dr. Gabrielle Tuijthof. The project won theprize for the best BSc project of TU Delft and was awarded a shared grant of 2kEuro.Visiting BSc students Siobhan Rigby, from MIT, Micro-mechanical properties of peri-prostheticfibrous 012-2013201220112015PhD exam committees Eva Urquia Edreira, PhD, Calcium phosphate ceramics for bone regeneration,Radboud University, Nijmegen, The Netherlands Johan van der Stok, PhD, Erasmus Medical Center, Rotterdam, The Netherlands. Mohamad S Ghahfarokhi, PhD, Experimental and numerical characterization ofnative bone tissue and glass ceramic bone scaffold at small scale, Politecnico diMilano.MSc exam committees M.F. Knol, “Thermal modelling of Selective Laser Melting: a semi-analyticalapproach”, Faculty Mech, Marit, & Mater Eng, TUDelft. Dennis Rombout, “Design of a power-assistance system for body-powered handprostheses”, Faculty Mech, Marit, & Mater Eng, TUDelft. Ferdinand Peters, Realizing a small UAV for medical transport in developingcountries, Faculty Mech, Marit, & Mater Eng, TUDelft. Seval Edip, Effect of Hypoxia on Transforming Growth Factor-β signaling Pathway inOsteoarthritic Human Cartilage, Faculty Mech, Marit, & Mater Eng, TUDelft. Erik Simons, Simulation of strain localization with an enriched gradient-enhanceddamage model, Faculty Civil Eng, TU Delft. Tim de Ruig, Tailor made flanged parts for the aircraft industry, Faculty Aerosp Eng,TUDelft. H.A. Bosch, Finite element analysis of a kite for power generation, Faculty Mech,Marit, & Mater Eng, TUDelft.University service Coordinator, MSc program: Tissue Biomechanics and Implants, Dept BiomechEng, Faculty Mech, Marit, & Mater Eng, TUDelft. Committee Member, Education Board, Biomed Eng Program, 010-present2010-present

Member, High Perform Comput (HPC) committee, representing the BiomechEng Dept.2011-presentPublication and citation statistics H-index: 25 (Web of Science) Publications indexed in Web of Science: 105. First or last author: 80% (86/105). ResearcherID profile: tions Edited volumes/special issuesZadpoor, AA, Malda, J (Editors), 2016, "Additively Manufactured and 3D printed Biomaterials",special issue of the Annals of Biomedical Engineering, in progress.Zadpoor, AA, Taylor, D (Editors), 2016, "Mechanics of Additively Manufactured Biomaterialsand Implants", special issue of the Journal of the Mechanical Behavior of BiomedicalMaterials, in progress.Zadpoor, AA (Editor), 2016, “Biomaterials and Tissue Biomechanics”, special issue ofMaterials, in progress.Weinans, H, Zadpoor, AA (Editors), 2016, "Metallic Biomaterials",special issue of Metals, in progress.Vena, P, Zadpoor, AA (Editors), 2015, “Multi-scaleBiomechanics”, special issue of the J Biomech Eng- TransacASME.Zadpoor, AA (Editor), 2015, “Mechanics of Biomaterials”, specialissue of Materials.Contributions to booksZadpoor, AA, Sinke, J, Benedictus, R, 2011, “Numerical modeling of TWB forming”, in TailorWelded Blanks for Advanced Manufacturing, Edited by Kinsey, B. L. and Wu, X.,Woodhead Pub Ltd, Cambridge, UK, pp 68-94, ISBN 1-84569-704-9.Sinke, J, Zadpoor, AA, Benedictus, R, 2011, “Tailor-made blanks for the aerospace industry”, inTailor Welded Blanks for Advanced Manufacturing, Edited by Kinsey, B. L. and Wu, X.,Woodhead Pub Ltd, Cambridge, UK, pp 181-201, ISBN 1-84569-704-9.Zadpoor, AA, Sinke, J, 2010, “Weld metal ductility and its influence on the formability of tailorwelded blanks”, in Failure Mechanisms for Advanced Welding Processes, Edited by Sun,X., Woodhead Pub Ltd, Cambridge, UK, pp 258-288, ISBN 1-84569-536-4.JournalsSubmitted/ready for submission Tümer, N, Blankevoort, L, van de Giessen, M, Terra, MP, de Jong, PA, Weinan, H, Tuijthof,GJM, Zadpoor, AA, 2016, “Bone shape difference between control and osteochondral defectincidence groups of the ankle joint”, Osteoarthritis & Cartilage, revised version under review. Arbabi, V, Pouran, B, Weinans, H, Zadpoor, AA, 2016, “Combined inverse-forward artificialneural networks for fast and accurate estimation of the diffusion coefficients of cartilage basedon multi-physics models”, J Biomech, minor revisions requested. Pouran, B, Arbabi, V, Villamar, JA, Baka, N, Zadpoor, AA, Weinans, H, 2016, “Isolated effectsof external bath osmolality, solute concentration, and electrical charge on solute transport acrossarticular cartilage”, Med Eng Phys, under review. Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, “Analytical relationshipsfor the mechanical properties of additively manufactured porous biomaterials based onoctahedral unit cells”, App Math Model, under review. Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, “Mechanical propertiesof additively manufactured thick honeycombs”, Materials, under review. Amin Yavari, S, Loozen, L, Paganelli, F, Bakhshandeh2, S, Lietaert, K, Fluit, AC, Boel, CHE,Alblas, J, Vogely, CH, Weinans, H, Zadpoor, AA, 2016, “Bactericidal behavior of additivelymanufactured porous titanium with nanotubular surfaces releasing silver ions”, ACS AppliedMaterials & Interfaces, revised verison under review. Zadpoor, AA, Hedayati, R, 2016, “Analytical relationships for prediction of the mechanical9

properties of additively manufactured porous biomaterials”, J Biomed Mater Res A, underreview.De Krijger, J, Rans, C, Van Hooreweder, B, Lietaert, K, Pouran, B, Zadpoor, AA, 2016, “Effectsof applied stress ratio on the fatigue behavior of additively manufactured porous biomaterials”,J Mech Behav Biomed Mater, revisions requested.Pouran, B, Arbabi, V, Weinans, H, Zadpoor, AA, , 2016, “Application of multiphysics models toefficient design of experiments of solute transport across articular cartilage”, Comp MethodBiomech Biomed Eng, under review.Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, “Mechanical propertiesof additively manufactured octagonal honeycombs”, Mater Sci Eng C, revisions requested.Arbabi, V, Pouran, B, Weinans, H, Zadpoor, AA, 2016, “Neutral solute transport acrossosteochondral interface: a finite element approach”, J Biomech, under review.Pouran, B, Arbabi, V, Zadpoor, AA, Weinans, H, 2016, “Solute transport at the interface ofcartilage and subchondral bone plate: effect of micro-architecture”, J Orthop Res, underreview.Zadpoor, AA, 2016, “Origami-based materials and structures”, NPG Asia Mater, under review.Moshtagh, PR, Pouran, B, Korthagen, NM, Zadpoor, AA, Weinans, H, 2016, “An optimizedindentation protocol for measurement of cartilage stiffness: the effects of spatial variation andindentation parameters”, J Biomech, under review.Camargo, WA, Hoekstra, JWM, Alghamdi, HS, Zadpoor, AA, Amin Yavari, S, Jansen, JA, vanden Beucken, JJJP, 2016, “Preliminary data on bone responses to surface porous titanium boneimplants”, Clin Oral Implants Res, to be submitted.Accepted/in press Zadpoor, AA, 2016, “Mechanical meta-materials”, Materials Horizons, in press. Moerman, A, Zadpoor, AA, Oostlander, A, Schoeman, M, Rahnamay Moshtagh, P, Pouran, B,Valstar, E, 2016, “Structural and mechanical characterization of the peri-prosthetic fibrousmembrane in loosened hip prostheses: an explorative study”, J Mech Behav Biomed Mater, inpress.2016 Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Zadpoor, AA, 2016, "Mechanics of additivelymanufactured porous biomaterials based on the rhombicuboctahedron unit cell”, J MechBehav Biomed Mater, vol 53, pp 272-294. Arbabi, V, Pouran, B, Weinans, H, Zadpoor, AA, 2016, “Multiphasic modeling of charged solutetransport across articular cartilage: application of finite-bath model”, J Biomech, vol 49, pp1510-1517. Janbaz, S, Weinans, H, Zadpoor, AA, 2016, “Geometry-based control of instability patterns incellular soft matter”, RSC Advances, vol 6, pp 20431–20436. Hedayati, R, Sadighi, M, Mohammad-Aghdam, M, Hosseini Toudeshki, H, Zadpoor, AA, 2015,“Computational prediction of the fatigue behavior of additively manufactured porous metallicbiomaterials”, Int J Fatigue, vol 84, pp 67-79. Moshtagh, PR, Pouran, B, Van Tiel, J, Rauker, J, Zuiddam, MR, Dirned, FWA,

Organization of meetings International Advisory Committe, Biann Int Conf Exper Solid Mech (X-Mech-2016), 16-17 Feb 2014, Tehran, Iran. Organizing committee, Int Conf on Full-Field Measurement Techniques and their Applications in Experimental Solid Mechanics (PhotoMechanics 2015), Delft, the Netherlands.