MCT101E0CW1280800LMLIPS 1280 X 800 LVDS Interface

Electra House, 32 Southtown RoadGreat Yarmouth, NorfolkNR31 0DU, EnglandLVDS InterfaceMCT101E0CW1280800LMLIPS 1280 x 800SpecificationVersion: 1Telephone 44 (0)1493 602602Fax 44 (0)1493 ys.comTFT ModuleDate: 21/03/2018Revision102/01/2018First issue.Display FeaturesDisplay Size10.1”Resolution1280 x 800WXGAVGA SizeOrientationLandscapeRGBAppearance3VLogic VoltageLVDSInterfaceBrightness300 cd/m2CTPTouchscreenModule Size257.96 x 168.60 x 5.575 mmOperating Temperature-20 C 70 C40 - Way FFCPinoutDisplay AccessoriesPart NumberMPBV6Description40 Way FFC to cable and wires.Driven by any driver board that canbe wired to a 1mm pitchSHDR-40V-S-B receptacle.MCIB14/16HDMI-to-LVDS interface board,with voltage generation.LEDV3Constant current LED back lightdriver.Box Quantity---Weight / Display---Optional VariantsAppearancesResistive Touch PanelNo Touch PanelVoltage

Contents1.Module Classification Information2.Summary3.General Specification4.Interface5.Contour Drawing6.Absolute Maximum Ratings7.Electrical Characteristics8.Interface Timing Characteristics9.Optical Characteristics10.Reliability11.Touch Panel Information12.Other

2.SummaryTFT 10.1" is a TN transmissive type color active matrix TFT liquid crystal display that useamorphous silicon TFT as switching devices. This module is a composed of a TFT LCDmodule.It is usually designed for industrial application and this module follows RoHs.

3.General Specifications Screen Diagonal: 10.1 inch Number of Pixels: 1280 x 3(R GB) x 800 dots Module dimension: 257.96 x 168.6 x 5.575 mm Active area: 216.96 (H) x 135.6(V) mm Pixel pitch: 0.1695 0.1695 mm Display Mode: Normally Black Pixel Arrangement: R.G.B. Vertical Stripe Backlight Type: LED,Normally White Aspect Ratio:16:9 CTP FW Version: 50 Electrical Interface (Logic): LVDS With /Without TP: With CTP Surface: Glare*Color tone slight changed by temperature and driving voltage.

4.Interface4.1. Interface ConnectorA 40pin connector is used for the module electronics interface. The recommended model isF62240-H1210B manufactured by Vigorconn.Pin No.SymbolI/OFunction1VCOMPCommon Voltage2VDDPPower Supply3VDDPPower Supply4NC-No connection5NC-No connection6NC-No connection7GNDPGround8Rxin0-I-LVDS Differential Data Input9Rxin0 I LVDS Differential Data Input10GNDPGround11Rxin1-I-LVDS Differential Data Input12Rxin1 I LVDS Differential Data Input13GNDPGround14Rxin2-I-LVDS Differential Data Input15Rxin2 I LVDS Differential Data Input16GNDPGround17RxCLK-I-LVDS Differential Clock Input18RxCLK I LVDS Differential Clock Input19GNDPGround20Rxin3-I-LVDS Differential Data Input21Rxin3 I LVDS Differential Data Input22GNDPGround23NC-No connection24NC-No connection25GNDPGround26NC-No connection27NC-No connection28NC-No connection29AVDDPPower for Analog Circuit30GNDPGround31LED-PLED CathodeRemarkR0-R5,G0G1G5,B0,B1B2-B5,HS,VS,DELVDS CLKR6,R7,G6,G7,B6,B7

32LED-PLED Cathode33NC-No connection34NC-No connection35VGLPGate OFF Voltage36NC-No connection37NC-No connection38VGHPGate ON Voltage39LED PLED Anode40LED PI: input, O: output, P: PowerLED Anode4.2. CTP PIN tionI2C data input and outputI2C clock inputExternal Reset, Low is activeExternal interrupt to the hostPower Supply : 3.3VGround for analog circuitRemark

TP Outline 257.96TFT Outline 229.34¡ 0Ó.218.6918.7119.21TP VA 218.00Sensor AA 217.96TFT AA 216.965.575¡ 0Ó.52.50¡ 0Ó.151234561280 (RGB) * 8004.30max3.410.16950.16950.0565R GBSCALE 60/15.014.6814.189.8114.32TFT AA 135.60Sensor AA 136.60TP VA 137.00TP Outline 168.60TFT Outline 148.98¡ 0Ó.213.985.Contour DrawingPIN1StiffenerContact sidePIN60.30¡ 0Ó.05The non-specified tolerance of dimension is ¡ 0Ó.3 mm .SDASCLRSTINTVDDTGND

Rxin3 GNDNCNCGNDNCNCNCAVDDGNDLEDLEDNCNCVGLNCNCVGHLED LED 170.4019.5040CN1Down side;Pitch 0.5mm155.27¡ 50.0¡ Ó1.0VCOMVDDVDDNCNCNCGNDRxin0Rxin0 GNDRxin1Rxin1 GNDRxin2Rxin2 GNDRxCLKRxCLK GNDRxin3-- 1234567891011121314151617181920PIN664.36¡ Ó0.5PIN1W:6*0.30P:5*0.50 2.503.50The non-specified tolerance of dimension is ¡ Ó0.3 mm .

6.Absolute Maximum RatingsItemSymbolMinTypMaxUnitOperating TemperatureTOP-20－ 70 Storage TemperatureTST-20－ 70 Note: Device is subject to be damaged permanently if stresses beyond those absolutemaximum ratings listed above1. Temp. 60 , 90% RH MAX. Temp. 60 , Absolute humidity shall be less than 90% RHat 60

7.Electrical Characteristics7.1. Typical Operation ConditionsItemPower voltageSymbolVDDAVDDVGHVGLVCOM(Note 2.78.422.3-6.73.3UnitVVVVVRemarkInput signal voltageNote 2Supply Voltage ForVDDT2.83.3V－Touch LogicNote 1: Be sure to apply VDD and VGL to the LCD first, and then apply VGH.Note 2: Typical VCOM is only a reference value, it must be optimized according to each LCM.Be sure to use VR.

7.2. Current ConsumptionItemCurrent for Driver7.3. Power Sequencea. Power on:b. Power MAX.75075012070UnitRemarkuAuAmAmAVGH 22VVGL -7VVDD 2.5VAVDD 8.2V

7.4. Backlight CharacteristicsParameterSymbol Min.Supply voltage of white LED backlightVL8.6－Current for LED backlightIL50000LED life timeNote 1 : There are 1 Groups LEDTyp.Max.9.6220-10.2－-Note 2 : Ta 25 Note 3 : Brightness to be decreased to 50% of the initial valueNote 4 : The single LED lamp caseUnitVmAHrRemarkNote 1Note 1

8.LVDS Signal Timing Characteristics8.1. AC Electrical CharacteristicsParameterLVDS Differential input highThreshold voltageLVDS Differential input lowThreshold voltageLVDS Differential inputcommonmode voltageLVDS Differential voltageSymbolMin.ValuesTyp.MAX.UnitRxVTH-- 100mVRxVTL-100--mVRxVCM0.7-1.6V VID 200-600mVRemarkRXVCM 1.2V

8.2. Timing TableParameterSymbolClock Frequency1/TcHorizontal display areathdHS period timethHS Width Back Porch Front PorchtHW tHBP tHFPVertical display areatvdVS period timetvVS Width Back Porch Front PorchtvW tvBP Frame rate 60Hz

8.3. LVDS Data Input Format

9.Optical RemarkResponse timeTrTfθ 0 、Φ 0 -10152030.msNote 3Contrast ratioCRAt optimizedviewing angle600800--Note 4-Note 2,5Color ChromaticityWhiteViewing angle(Gray Scale ΦBθ 0 、Φ 0--CR 100.26 0.31 0.360.28 0.33 0.387585758575857585300--Deg.cd/m 2Note 1Center ofdisplayTa 25 2 Note 1: Definition of viewing angle rangeFig. 9.1. Definition of viewing angleNote 2: Test equipment setup:After stabilizing and leaving the panel alone at a driven temperature for 10 minutes, the measurementshould be executed. Measurement should be executed in a stable, windless, and dark room. Opticalspecifications are measured by Topcon BM-7 or BM-5 luminance meter 1.0 field of view at a distanceof 50cm and normal direction.Fig. 9.2. Optical measurement system setup

Note 3: Definition of Response time:The response time is defined as the LCD optical switching time interval between “White” state and“Black” state. Rise time, Tr, is the time between photo detector output intensity changed from 90%to10%. And fall time, Tf, is the time between photo detector output intensity changed from 10%to 90%DisplayDataWhite(TFT OFF)Black(TFT ON)White(TFT OFF)100%90%10%0%Note 4: Definition of contrast ratio:The contrast ratio is defined as the following expression.Contrast ratio (CR) Luminance measured when LCD on the "White" stateLuminance measured when LCD on the "Black" stateNote 5: White Vi Vi50 1.5VBlack Vi Vi50 2.0V“ ” means that the analog input signal swings in phase with VCOM signal.“ ” means that the analog input signal swings out of phase with VCOM signal.The 100% transmission is defined as the transmission of LCD panel when all the input terminals ofmodule are electrically opened.Note 6: Definition of color chromaticity (CIE 1931)Color coordinates measured at the center point of LCDNote 7: Measured at the center area of the panel when all the input terminals of LCD panel areelectrically opened.

10.ReliabilityContent of Reliability Test (Wide temperature, -20 70 )Environmental TestTest ItemHigh TemperaturestorageLow TemperaturestorageHigh TemperatureOperationContent of TestEndurance test applying the high storagetemperature for a long time.Endurance test applying the low storagetemperature for a long time.Endurance test applying the electric stress(Voltage & Current) and the thermal stress tothe element for a long time.Low Temperature Endurance test applying the electric stressOperationunder low temperature for a long time.High Temperature/ The module should be allowed to stand at 60Humidity Operation ,90%RH maxThermal shockThe sample should be allowed stand theresistancefollowing 10 cycles of operation-20 25 70 30minTest Condition70 200hrs-20 200hrs70 200hrsNote2-20 200hrs60 ,90%RH96hrs-20 /70 10 cycles11,2——1,2——5min30min1 cycleVibration testEndurance test applying the vibration during Total fixed3transportation and using.amplitude : 1.5mmVibrationFrequency :10 55HzOne cycle 60seconds to 3directions of X,Y,Zfor Each 15 minutesStatic electricity test Endurance test applying the electric stress to VS 600V(contact) ——the terminal., 800v(air),RS 330ΩCS 150pF10 timesNote1: No dew condensation to be observed.Note2: The function test shall be conducted after 4 hours storage at the normalTemperature and humidity after remove from the test chamber.Note3: The packing have to including into the vibration testing.

11.Touch Panel Information257.96¡ 0Ó.1(Outline )229.06(sensor OD)TP VA 218.00217.96¡ 0Ó.2(Sensor.AA)3.08¡ 0Ó.22.50¡ 0Ó.15228.94(Double side adhesive)14.511.80¡ 0Ó.05220.46Pull tape(0,0)2.980.58¡ l tapePull tape148.58(Double side adhesive)139.10FrontBack168.60¡ 0Ó.1(Outline )148.70¡ 0Ó.2(Sensor OD)137.00¡ 0Ó.2(VA)136.60¡ 0Ó.2(Sensor.AA )5.602.8855.27¡ 0Ó.56.50Pull tapeBlack printing3.50250.0¡ 1Ó.0240¡ Ó2.01.50max5.00¡ 0Ó.362.31¡ 5Ó.078.81¡ 5Ó.00.30¡ 0Ó.0530.10¡ 0Ó.5W:6*0.30P:5*0.50 2.503.503.50¡ 0Ó.1The non-specified tolerance of dimension is0.3mm.

11.1. Timing for Read OperationFirst, set address pointer based on the aforesaid Write Operation timing sequence. Then, resendStart condition to perform Read addressing and read data in the registers.Address R: Slave address with Read control bit.NACK: Hostissues NACK after reading the last byte.After setting Read addresses, the host can read one or more than one byte at a time. GT9110 willautomatically increase the address pointer and send subsequent data in sequence.The Stop condition (the first E signal as shown in the above diagram) after setting the address pointer isoptional. However, the repeated Start condition has to be sent.11.2. Coordinate registers

11.3. I2C protocol3.3V,400BPS ,pull high 2K ohm

8.Interface Timing Characteristics 9.Optical Characteristics 10.Reliability 11.Touch Panel Information 12.Other; 2.Summary; TFT 10.1" is a TN transmissive type color active matrix TFT liquid crystal display that use amorphous silicon TFT as switching devices. This module is a composed of a TFT_LCD