Guidace Note - Safe Use Of Chemicals In The Woodworking Industry
GUIDANCE NOTESafe use of Chemicals in theWoodworking ION
ContentsWho is at risk?page1What are the hazards?page1How do I know what chemicalsI am using?page2How can I be exposed to chemicals?page3What are the health effects?page4pagepagepagepage4567What is the risk to my health?page8What controls can be used?page9SolventsResins and CoatingsPreservativesGlues and MDFWhat information and training is required? page 10Material Safety Data Sheets (MSDS)page 10What storage controls are there forchemicals?page 12Storage of particleboard and MDFpage 13Disposal of preservative treated timberpage 13First aid facilitiespage 14What the law sayspage 14Checklist for hazardous substancesin the workplacepage 16
Safe use of chemicals in thewoodworking industryThis Guidance Note is one of three publications dealing withwoodworking industry hazards: chemicals, wood dust, and guarding woodworking machinery.Some chemicals used in the woodworking industry areclassed as hazardous by the Occupational Safety and HealthRegulations 1996, and have specific safety requirements.These include substances used to treat, preserve, paint,remove paint, varnish, stain, lacquer, clean, seal and gluefurniture and wood products.More detailed advice on the chemicals in each of thesesubstances should be obtained from the manufacturer’sMaterial Safety Data Sheet (MSDS), which must be providedby the supplier and made readily available for people workingwith or near the chemicals.Who is at risk?People involved in the manufacture, repair or restoration offurniture and other wood products, or in the building industry,may be exposed to hazardous chemicals. They includecarpenters, joiners, painters, cabinetmakers, assemblers,apprentices, handy-persons and, to some extent, people whosand wood before painting.What are the hazards?Chemicals used in woodworking can cause a number ofhealth problems. Each hazardous chemical therefore needsto be identified, assessed and controlled to minimise healthrisks to employees.Some chemicals are hazardous when they are stored,decanted, mixed or applied. Other hazardous chemicals, e.g.in treated wood or wood products, may be hazardous ifinhaled when the wood is sawn, planed, sanded, turned ordrilled.31
Some glues, resins and isocyanate based paints and varnisheshave caused occupational asthma.Some solvents can cause respiratory irritation and skinsensitisation (e.g. dermatitis). Solvents can also be absorbedinto the bloodstream through skin contact.Epoxy resins and timber preservatives can cause localiseddermatitis and other skin effects.Medium Density Fibreboard (MDF) when machined can emittwo hazardous substances, wood dust and formaldehyde.Wood dust hazards are discussed in the WoodworkingIndustry Guidance Note, Controlling Wood Dust Hazards AtWork, published by the WorkSafe Western AustraliaCommission.Formaldehyde risks are discussed in this Guidance Noteunder the heading “What are the health effects?”How do I know what chemicals Iam using?Chemicals used in the woodworking industry must belabelled. The label must contain basic information about theproduct and the hazards. More detailed information isavailable in the Material Safety Data Sheet, which should beavailable for every hazardous substance used in yourworkplace.New timber products are usually labelled by the manufacturerand provide information on the chemicals used. It is moredifficult to identify chemicals used on second hand timber.Some information can be obtained from WorkSafe and theDepartment of Health Western Australia.In the absence of this information, it is safer to assume thereis a hazard and precautions taken to avoid skin contact,breathing in or swallowing the wood dust.2
Labelled container of adhesive showing additionalinformation.How can I be exposed tochemicals?Most of the chemicals in or applied to wood or wood productsmay enter the body through breathing, swallowing or skincontact.Inhalation (breathing in) is the most significant route: Chemicals such as adhesives, paint strippers, paints,varnishes, stains and water-based wood preservatives areall chemicals that can be inhaled either as droplets orfumes. Detailed information on reducing the risk of inhalingisocyanate vapours and fine droplets containingisocyanates is provided in the WorkSafe Western AustraliaCommission Guidance Note Controlling IsocyanateHazards at Work.Absorption through skin contact: Some wood preservatives and solvents can be absorbedthrough the skin. Substances such as epoxy resins and timber preservativescan cause local skin effects such as dermatitis.35
Swallowing: This usually happens through lack of personal protectiveequipment or poor personal hygiene. Chemicals can beswallowed through biting contaminated fingernails, eatingor smoking with contaminated hands or wearingcontaminated clothing.It can also happen when inhaled dust is swallowed, e.g. wooddust containing preservatives such as copper chrome arsenic(CCA).What are the health effects?Chemicals used in wood working have varying health effectsand information on these can be obtained from the MSDS.Generally chemicals used fall into the following categories:SolventsSolvents are used for cleaning wood products (e.g. thinners,mineral turpentine) and stripping paint (e.g. mixtures ofmethylene chloride and methyl ethyl ketone or MEK).Solvents have the following health effects: Solvent droplets or vapours irritate the eyes, nose andthroat. When inhaled, solvent fumeshave a narcotic effect.Symptoms include dizziness,headaches, light-headednessand nausea.At highconcentrations they can causeunconsciousness and evendeath. lvent.4
Prolonged or repeated skin exposure can cause dryness,cracking and dermatitis. Solvents can be absorbed into the bloodstream throughskin contact. Broken or cut skin may allow solvent to beabsorbed more quickly. High exposure may cause damage to the nervous system,liver and the kidneys. Most solvents used in the woodworking industry are highlyflammable. Methylene chloride (also known as dichloromethane) isfound in some paint strippers. It is not flammable but it islisted as a suspected carcinogen (cancer causing) by theNational Occupational Health & Safety Commission. Using personal protective equipment when applyinglacquer in a spray booth.Resins and CoatingsResins and Coatings are used for decorative finishes and toprotect timber. Health effects vary depending on the chemicalproperties. Examples include: Two part polyurethane coatings. The isocyanate curingagents can cause irritation to the respiratory tract andsensitisation (asthma). Epoxy resins. The curing agents can cause dermatitis andasthma.57
Lead based paints. These are no longer used on wood butmay be found on some old, second hand timber. Lead canbuild up in the body and cause damage to organs such asthe kidneys, and to the nervous system and reproductivesystems.Other coatings and stains are available. Information on thehealth effects should be obtained from the label and MSDS.PreservativesTreated timber is used instructures likely to beexposed to fungi and insectattack. Timber used inwoodworking is generallynot treated. Neverthelesscaution needs to be takenwith old or second handtimber that may have beentreated with chemicals.Preservatives include CCA(copper chrome arsenic),creosote, boron, copper andtin compounds.These preservatives can beinhaled if wood dust isgenerated or swallowedwhen eating or smoking withcontaminated hands. Some(e.g. creosote, CCA and tincompounds)canbeabsorbed through the skin.Preservatives can also beinhaled if treated timber isburnt. Untreated pine (onleft). Pine treated withCCA (on right).6
The health effects of timber preservatives vary. For example: Creosote can cause skin, eye and respiratory irritation. Itcan also make the skin more sensitive to light and increasethe risk of skin cancer. The arsenic in CCA preservatives can cause a range oftoxic effects on the kidneys, liver, nervous system andblood. The chromium can cause toxic effects as well aschrome ulcers. Both chromium and arsenic can causecancer.Information should be obtained for the specific chemicalbefore working with treated timber. This can be achieved byrequesting a MSDS.Glues and MDFThere are several common types.PVA wood glues used to make joins are relatively low intoxicity and do not produce high concentrations of fumes.They may however cause irritation to the skin.Urea formaldehyde glues are commonly used for laminatingand gluing veneers, and in the manufacture of MDF andchipboard. They produce formaldehyde gas when curing.Formaldehyde: irritates the eyes, nose and throat; can sensitise individuals. Symptoms include shortness ofbreath, wheezing, cough and tightness in the chest; Bundled and stacked Medium Density Fibreboard(MDF).79
is listed as a category 2 carcinogen by the NationalOccupational Health & Safety Commission. This meansit should be treated as if it was carcinogenic to humans.For more detailed and specific health effects and precautionsfor use of each hazardous substance, look at the MSDS thatmust be made available by the employer. It is theresponsibility of the supplier to provide the MSDS to theemployer.What is the risk to my health?The risk to a person’s health is dependent on a number offactors, including; the nature of the substance; the work process; the level of exposure (eg how much is in the air, whatcontrols are in place); and for how long a person is exposed.A risk assessment must be carried out by the employer todetermine the level of risk arising from the use of eachhazardous substance. This should be done in consultationwith the employees and health and safety representatives.Occupational exposure standards have been established formany of the chemicals used in this industry. These are levelsthat should not be exceeded. Examples include solvents,isocyanates and formaldehyde. Additional information toassist with risk assessment can be found in the MSDS foreach of the chemicals involved.Advice on measuring exposure levels in workplaces can besought from WorkSafe.Assistance in understanding the information on the MSDSmay be necessary.Further information on risk assessment can be found in theNational Occupational Health and Safety Commissionpublication Guidance Note for the Risk Assessment of HealthRisks arising from the use of Hazardous Substances in theWorkplace [NOHSC:3017(1994)].8
What controls can be used?Controls should be selected in this order of effectiveness:Elimination - don’t use a chemical if you don’t need to.Substitution - replace a hazardous chemical with a lesshazardous one.Isolation - isolate the work, or separate those doing the workand those in the general area from the hazard.Engineering controls - general dilution ventilation, localexhaust ventilation or spray booths.Administrative controls - reduce the time length of exposureby means such as job rotation, rosters etc.Personal Protective Equipment - use appropriate respirators,goggles, gloves and protective clothing when other methodsare not practicable, or as additional precautions.Several of these options can be used together to achievehigher levels of protection.The MSDS will inform you of the types of controlsappropriate for each chemical. Brush application may be an alternative method forsome work.119
What information and training isrequired?The purpose of training is to provide information and skillsthat will allow employees to work safely and to reactappropriately if things go wrong. Workers must be informed of all identified hazards in theworkplace. They must be given information, instruction, training andsupervision in safe working procedures, includingselection, fitting, use, storage and maintenance of personalprotective equipment. Workers should know how to identify hazards and to reportthem to a supervisor. Training on hazardous substances must include potentialhealth effects of the substances used, control measures,correct use of protective equipment and the need for anddetails of health surveillance. Workers from non-English speaking backgrounds mayhave special needs. They should be provided withinformation in their first language and increasedsupervision if necessary. Workers must be trained in cleaning up chemical spills, ifrequired to do so, and in emergency evacuation procedures. Training should be ongoing, with regular revision of safeprocedures. Training shouldbe documented. Only trained persons shouldenter areas where hazardousmaterials are used.10
Material Safety Data Sheets (MSDS)MSDS provide important information needed for the safeuse of hazardous substances in the workplace. They containimportant information that allows a hazardous substance tobe used safely. This includes: Company details - e.g. name, address, emergency phonenumber. Identification - e.g. product name, other names, UNnumber, Dangerous Goods class, Poisons Schedule. Physical properties - e.g. appearance, vapour pressure,boiling point, solubility. Ingredients - e.g. chemical name, CAS number (an uniquenumber that is assigned to an individual chemical),proportions. Health effects - eg long term, short term. Precautions for use - e.g. ventilation, other engineeringcontrols, exposure standards. Personal protection - e.g. respiratory, eye, skin protection. Storage & transport - e.g. storage conditions, dangerousgoods class. Spills and disposal - e.g. clean up procedures andprecautions, disposal. Fire & explosion - e.g. fire fighting recommendations,decomposition products.MSDS are produced by the manufacturer and must beprovided to the workplace by the supplier. Employers areresponsible for obtaining MSDS and providing them toemployees for all chemicals used at their workplace.Employers must ensure that employees understand anyinformation provided to them.If there are no MSDSs readily available, the employee shouldask for them.1113
What storage controls are there forchemicals?General principles should involve: storing hazardous substances in a cool, lockable, enclosedarea with adequate ventilation; storing incompatible substances separately and avoidingrisks of mixing and cross contamination; ensuring all labelsremain intact on allcontainersandpackaging; where chemicals aredecanted into smallercontainers, the newcontainer must beadequately labelled. Asa minimum the labelmust contain the nameof the product, risk andsafety phrases; Signage of a chemicalstore. limiting access to chemical storage areas to authorisedpeople only; ensuring flammable, explosive or toxic substances are storedaway from possible sources of electric spark, heat or flame;12
checking all containers against leakage or seepage andkeeping lids and caps tightly sealed; ensuring forklift and other mobile plant operators are formallytrained in safe procedures for chemical containers; appropriate fire fighting and emergency equipment; monitoring atmospheric contamination and temperaturelevels in storage areas; a well developed evacuation procedure with regular drillsfor situations such as fire, chemical spills or accidents,and earthquakes.Chemicals classed as dangerous goods must be stored inaccordance with the Storage of Dangerous Goods Regulationsadministered by the Department of Minerals and PetroleumResources. For further information contact the Department ofMinerals and Petroleum Resources on 9222 3333.There are specific requirements for isocyanates. TheWorkSafe Western Australia Commission Guidance Note onControlling Isocyanate Hazards at Work covers theserequirements.Storage of particleboard and MDFPlywoods, fibre boards, particle boards, MDF and laminatedproducts may continue to give off small amounts offormaldehyde after they leave the manufacturer. Theseproducts should be stored in a well ventilated area to avoidthe build up of formaldehyde.Disposal of preservative treatedtimberTimber that has been treated with preservative needs to bedisposed of appropriately. For further information contactyour local council or shire or the Department ofEnvironmental Protection on 9222 7000.As a general rule, treated and painted timber should not beburned.1315
First aid facilitiesFirst aid facilities should be appropriate for the hazards inthe workplace and should comply with the WorkSafe WesternAustralia Commission Code of Practice First Aid, WorkplaceAmenities and Personal Protective Equipment. Specific firstaid requirements for the type of chemical used can be foundin the manufacturer’s MSDS. This will provide guidance onmeasures to be taken when exposure has occurred throughinhalation, skin contact, splashes to the eyes or ingestion.Employees may require some assistance in interpreting thisdata. Assistance may be obtained from employers,manufacturers or WorkSafe. The information from MSDSshould be readily available in case of an emergency.What the law saysThe Occupational Safety and Health Act 1984 says that asfar as is practicable, employers must provide and maintain awork environment in which employees are not exposed tohazards. This includes providing a safe system of work,instruction, training, information, supervision and personalprotective equipment where appropriate.The Act says employees must take reasonable care of theirown safety and health and avoid adversely affecting the safetyand health of others. They must comply, as far as possible,with safety instructions, use personal protective equipmentprovided and report hazards or injuries.Chemicals that have certain adverse health effects areclassified as hazardous substances. The Occupational Safetyand Health Regulations 1996 set down specific requirementsfor workplaces that use hazardous substances. These coverthings such as: labelling of containers; Material Safety Data Sheets (MSDS); induction and safety training; risk assessment and control; health surveillance; and record keeping.14
The Regulations say employers, main contractors and selfemployed persons must: identify hazardous substances; assess the risk of injury or harm; and reduce the risk by:1. preventing exposure to the hazardous substance;2. means other than personal protective equipment; or3. where 1 and 2 are not practicable, by the use of personalprotective equipment.The Regulations set out specific requirements formanufacturers and suppliers of hazardous substances.Manufacturers must prepare MSDSs and ensure that theyare available. Suppliers must label hazardous substances andprovide MSDSs to purchasers at the time of purchase andthen as requested.1517
Checklist for HazardousSubstances in the WorkplaceThis checklist should be completed in workplaces wherehazardous substances are used and there may be significantrisk of injury or disease as a result of exposure to thesubstances.ItemRegister & MSDS The register of hazardoussubstances is completeand readily availableWorkplace indicatorsHazardous substances list iscompleteComplete set of MSDSs availableRegister readily availableLabels - Hazardoussubstances are properlylabelledOriginal containers havemanufacturer’s label.Risk Assessment Risk assessment hasbeen completed for allhazardous substancesand the assessment isrecorded in the register.Risk assessment done for allhazardous substancesRisk Controls - Practicablecontrol measures havebeen implemented andmaintained to reduce riskassociated with the use ofhazardous substances.Risk adequately controlledTraining - People requiredto work with hazardoussubstances have beenprovided with adequateinformation, instructionand training.People who may be exposed tohazardous substances have beentrainedHealth Surveillance Health surveillance isundertaken whereappropriate. This may notbe applicable to theworkplace.For substances in Schedule 5.3 ifthere is a risk - eg lead,isocyanates, asbestos andorganophosphorous insecticides:Decanted containers labelled withname, risk and safety phrasesRecord of assessment in theregisterReport available where risk issignificantHierarchy of controls taken intoaccountAppropriate first aid andemergency facilities providedRecord of training includes:health effects, controls, safe workmethods, and PPE/clothingappointed medical practitioner16yesno
Contacts for further informationChamber of Commerce and Industry of Western Australia180 Hay StreetEAST PERTH WA 6000Tel.: (08) 9365 7555Fax.: (08) 9365 7500Website: www.cciwa.comEmail: osh@cciwa.comDepartment of Environmental ProtectionWestralia Building141 St Georges TerracePERTH WA 6000Tel.: (08) 9222 7000Environmental Health BranchDepartment of HealthGrace Vaughn House227 Stubbs TerraceSHENTON PARK WA 6008Tel.: (08) 9388 4999Email: webmaster@health.wa.gov.auDepartment of Minerals and Petroleum ResourcesMineral House100 Plain StreetEAST PERTH WA 6004Tel.: (08) 9222 3333UnionsWALevel 479 Stirling StreetPERTH WA 6000Tel.: (08) 9328 7877Website: www.tlcwa.org.auEmail: unionswa@tlcwa.org.auWorkSafeDepartment of Consumer and Employment ProtectionLevel 51260 Hay StreetWEST PERTH WA 6005Tel.: (08) 9327 8777Fax.: (08) 9321 8973Website: www.docep.wa.gov.auEmail: safety@worksafe.wa.gov.au19
WorkSafeWesternAustraliaCOMMISSIONDecember 2001ISBN 0-7307-6122-3Comprehensive work safety and healthinformation can be found at:www.safetyline.wa.gov.auSafetyline is a service provided by theDepartment of Consumer and EmploymentProtection (www.docep.wa.gov.au)
woodworking industry This Guidance Note is one of three publications dealing with woodworking industry hazards: chemicals, wood dust, and guarding woodworking machinery. Some chemicals used in the woodworking industry are classed as hazardous by the Occupational Safety and Health Regulations 1996, and have specific safety requirements.
safe analysis is not included in this tutorial. Please see the fe-safe User Manual including fe-safe Tutorials for details, for instance: Tutorial 106: Using fe-safe with Abaqus .odb files . Start fe-safe /Rubber TM as described in the -safe feUser Manual. The Configure -safefe Project Directory window will be displayed:
Locking The Safe Step 1: Open safe Step 2: Take out any removable interior parts. Step 3: Remove the 2 lag screws using a 15mm socket and ratchet, then close and lock safe door. NOTE: Use caution as the safe is top heavy and due to the mass of the door, can tip easily when moving; installing the safe will take two or more people.
Standard Form 86 (SF 86), "Questionnaire for ational Security Positions," and to clarify or collect additional information relevant to the subject's background, character, reliability, judgment, and trustworthiness. Add
Locking The Safe Step 1: Open safe Step 2: Take out any removable interior parts. Step 3: Remove the 2 lag screws using a 15mm socket and ratchet, then close and lock safe door. NOTE: Use caution as the safe is top heavy and due to the mass of the door, can tip easily when moving; installing the safe will take two or more people.
Product Name l Safe T Salt Synonyms l Bulk Safe T Coarse; Bulk Safe T Fine; Bulk Safe T Mix; Bulk Safe T Salt; Safe T Salt (bagged w/YPS) 1.2 Relevant identified uses of the substance or mixture and uses advised against Relevant identified use(s) l Ice Control 1.3 Details of the supplier of the safety data sheet
The Safe School Plan is based on guidance from the California Department of Education and the Office of the Attorney General (Safe Schools - A Planning Guide for Action, 2002 Edition). Use of the Safe School Plan will help to ensure safe school plans are prepared in compliance with CEC, Section 32281, and the WIC Reauthorization Act of 2004.
IMPORTANT : DO NOT RETURN SAFE TO STORE If you are missing parts, have difficulty programming the lock or opening your safe, or any additional questions regarding the use and care of your safe, DO NOT RETURN your safe to the store. Please contact MESA SAFE COMPANY Technical Support : 888.381.8514 [Monday thru Friday 7AM - 4PM/PST] for assistance.
10. Efrain Balli Jr. 23. Madelynn Cortez 36. Alfredo Avila Lopez . 11 . Eligio Meudiola 24. George Garcia 37. Jesus Ruben Briseno . 12. Natalia Quintero Moreno 25. Diego Gonzalez Corpus 38. Juan E. Vela . NUMBER OF VOTES RECEIVED -49 . ELECTORS FOR TOM HOEFLING . 1. Tim Sedgwick 2. Dixie Sedgwick 3. Jared McCurrin 4. Jessica Kimberly Fagin 5. Andrew C. Sanders 6. Megan Sanders 7. Lynn Sanders .
