<Appendix> WPU-7800G Administrator Manual Configuration Entry . - VoIPon
Appendix WPU-7800G Administrator ManualConfiguration Entry (v 1.0.0)Copyright 2011 UniData Communication Systems Inc.1VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
COPYRIGHT NOTICEUniData Communication Systems is registered trademarks of UniData Communication Systems Inc. Other referenced trademarks are trademarks (registered orotherwise) of the respective trademark owners.Information furnished herein by UniData Communication Systems Inc., is believed to be accurate and reliable. The authors have used their best efforts inpreparing this material. These efforts include the development, research, and testing of the theories and programs to determine their effectiveness.However, UniData Communication Systems assumes no liability for errors that may appear in this document, or for liability otherwise arising from theapplication or use of any such information or for any infringement of patents or other intellectual property rights owned by third parties which may resultfrom such application or use. The products, their specifications, and the information appearing in this document are subject to change without notice.Printed in Korea 2011 by UniData Communication Systems Inc. All rights reserved.2VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
1. Overview1. This is a document explained all configuration entry, default and valid value so that administrator can understand them for better environment ofWPU-7800G.2. This configuration entry should be used on WPU-7800G provided by UniData only and should not be used on other product.i.Web configuration tool, PC application (PhoneConfigGenerator), APS systemii.Please refer to administrator’s manual for usage of each tool.3.Please find the administrator’s manual for details4. This document is subject to change if entry is added.2. Configuration entrySectionSYSTEMEntry nameLanguageDefault value1CommentDisplaying the UI supported languageValid erman(49)/Portuguese(351)/Spanish(34)/Admin Password000000Setting for admin password6 StringCountry Tone Type1Setting for countries toneU.S(1)/ South Africa(27)/ Greece(30)/ Netherlands(31)/Belgium(32)/ Spain(34)/ Italy(39)/ Switzerland(41)/Austria(43)/ United Kingdom(44)/Denmark(45)/Sweden(46)/ Germany(49)/ Brasil(55)/ Japan(81)/Korea(82)/China(86)/ Hong Kong(852)Use DNS SRV1Whether or not to use SRV Recordin DNS Query1: Use, In time of failure, try A Record again.0: Attempt only with A Record.RTP RTCPUse RTCPTRUEif value is TRUE, it use RTCP (Real Time Transport Protocol)0 :disable, 1:enableRTP Port Min9000Setting for minimum RTP(Real Time Transport Protocol) port value1024 65535Notice:RTP Port Max9020If the value is more than PTP port Max, Function could be limited.Setting for Maximum RTP(Real Time Transport Protocol) port value1024 65535Notice: If value is less than PTP port Max, Function could be limited3VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
RTCP Report Interval5000Setting for RTCP interval0 65535if Value 0, it means there is no interval.Unit: secRTCP CNAME"WPU-7800"Character String to enter CNAME of RTCP Message0 24 stringLast RTP Received Timeout0The call could be dropped, when value is smaller than last received RTP0 65535packet's value 0 means disable.Notice: If Hold or session time are enable this value will ignored.WEB SERVEREnable Web Server1User PasswordTIMETo use WEB Server Function or not (PC-SYNC)0 :disable, 1:enableSet to PC-Sync Password0 12Enable NTP1Time setting by using NTP or not.0 :disable, 1:enableDate Format0Time display format0 : YYYY/MM/DD Sun1 : YY/MM/DD Sun2 : MM/DD/YYYY Sun3 : MM/DD/YY Sun4 : DD Jan,YY (Sun)Time Zone Index" 09:00"Setting GMT offset 09:00 or 9:00 or -03:00 or -3:00 etc.Colon(:) divides Hour and Minute, so must not omit colon(:)Enable Daylight Saving Tim1Set to Summer time value0 :disable, 1:enableDST Start Month3DST Start Month1 12 mouthDST Start Day8DST Start Day1 31 dayDST End Month11DST End Month1 12 mouthDST End Day1DST End Day1 31 dayNTP Refresh Interval7200Setting for NTP(Netowork Time Protocol) refresh invervalUnit: Sec60 3153600NTP Server1203.248.240.103Setting for primary Time ServerIP address or FQDNNTP Server2203.254.163.74Setting for secondary Time ServerIP address or FQDNLocal Port5060SIP has a standard Port, which is usually 5060.5000 40000eSIPNotice: The SIP port is mandatory if there is no port for SIP, the call will befailedT1500SIP T1 Timer100 : 65535T24000SIP T2 Timer100 : 65535T45000SIP T4 Timer100 : 655354VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
Timer B0SIP Timer B (INVITE Transaction timeout timer)500 : 65535Timer F0SIP Timer F (non-INVITE Transaction timerout timer)500 : 65535Use User Agent0Add User-Agent Header in SIP Message or not0 : not use, 1 : useUser Agent Name"WPU-7800"String in User-Agent Header1 60 stringUse Version On User Agent0Add version in User-Agent Header0: not use, 1: useUse Vendor ID On User Ag0Add servername in User-Agent Header in User-Agent Header0: not use, 1: useUse MAC On User Agent0Add mac address in User-Agent Header in User-Agent Header0: not use, 1: useMax Forwards70Max-Forwards Header Value of SIP Message0 999Retry Hold On 4911Whether or not to retry in case of receiving 491 for response of hold0 : noop, 1 : retryCaller ID Mode0Setting Caller ID0 : Default, 1 : Privacy ,3325 : RFC3325ICT Transaction Max Count10ICT Transaction Max value0 100Use rport0Whether or not to use rport0 : not use, 1 : useOptions Expire20rfc3581 : in case received and rport in via Header of response different0 86400Request REFER Timeout200Wait REFER Response Time800entrequestfrom local ip, send options periodicallyRequest REFER Method Timeout.200 32000 0:disableunit : msoutWait REFER Method Response timeout500 32000 0:disableunit : ms180 Retransmission Interval0180 response retransmission interval, 0 is off this function. (unit: sec)1 36000:disableInvite Expire180the value of Expires header on INVITE (refer to RFC3261 13.3.1), 0 is off this10 86400 0:disablefunction. (unit: sec)Reuse Auth Header Within0reuse authorization header within same dialog0 :disable, 1:enable0reuse authorization header on REGISTER0 :disable, 1:enableRegister Contact Change0In changing IP in Registerinbg, not send old contact in on.0 :disable, 1:enableUse Remove All Contact1In expire 0, the problem not recognizing contact "*", select one of "*"/ IP0 :disable, 1:enableDialogReuse Auth Header On Registerfor Contact Value.Use Random Contact0Use userinfo Portion of contact header with random number instead of0 :disable, 1:enablealiasRetry To Redirect Contact1try to redirect when phone is received 3xx response0 :disable, 1:enable5VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
Auth Retry Count1how many times retry request again when server response 401/407.1 10Retry Register After Auth F0retry regsiter after authentication fail0 :disable, 1:enableIngore 183 Without SDP0Disregard when 183 has come without SDP.0 :disable, 1:enableIllegal UserName Check At0When username and IP bring different information equest-URI in time of0 :disable, 1:enableailRequest URIincomming call, 404 response occurs.Remove Register On Start0First send Unregister when starting first after Booting.0 :disable, 1:enableCheck Escape Of Call Num0escape character in call number check.(ex # - %23)0 :disable, 1:enable0Transaction's delete before L3HANDOVER0 :disable, 1:enableUse Increase session id0Whether or not to increase owner's session id in case the content of sdp0 : not increase, 1 : increaseUse Increase version1berTransaction Delete Before L3HANDOVERSDPchangesWhether or not to increase owner's version in case the content of sdp0 : not increase, 1 : increasechangesModified Session DetectionUSER ACCOUNT0This entry changes SDP version, SDE session ID by sever when changed0 : not detectsession. At this time, server cannot check change if values are not equal.1 : SDP Version detectFor that reason, check by using this entry.2 : SDP Session ID detectSession Name"A conversation"session name on sdp0 30 stringDisplaynameNULLSetting for LCD display when phone is idle.30 StringIf value is null, telephone number will be displayedThis entry is added in version 2.4.0Phone NumberNULLSetting for phone number32 StringNotice: If value is null, the call will be failedUser IDNULLSetting for SIP user ID32 StringNotice: Unless this value do not match with user ID in SIP server ,Regiter will be failedUser PasswordNULLSetting for SIP user Password32 StringNotice: Unless this value do not match with user password in SIP server ,Register will be failedSERVER SETTINGSURL Scheme0Setting SIP URL Scheme0 : sip, 1 : tel1st ProxyNULLSetting for 1st proxy serverIP address or FQDN6VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
REDUNDANCY2nd ProxyNULLSetting for 2nd proxy serverIP address or FQDNDomain RealmNULLSetting for proxy domainFQDNRegister Expire3600Setting for Register expire intervals in SIP60 86400Register Retry Backoff Inter"60,120,240,480,96If not registered, it periodically retries by this timer0 50val0"Mode0csv format (unit : sec)Set REDUNDANCY mode0 : registration status oriented mode1 : master/slave modeRequest Timeout4000If no response from one of servers when using REDUNDANCY, set timeout500 32000 0:disablefor initial request on order to move to next server.Use Fixed Primary Server1Whether or not to fix Primary Server0 : not fix, 1 : fixUse DNS Additional Record1Use dns additional records part for redundancy0 :disable, 1:enableUse Headset Button0Use Headset Button0 :disable, 1:enableBusy Tone Count10busytone repeated count when call end1 60Transfer Busy Tone Count10busytone repeated count when transfer failed1 60Call Waiting Tone Count1call waiting tone count-1 : infintesBASIC CALL0 : disable1 10 : countReject Hold Request On H1forbidden hold request during on hold or on transfer1: forbidden, 0: permit0forbidden hold request during on having 2 calls1: forbidden, 0: permit0Whether Hold Reqest of Held Telephone or not0 : Hold PermitedoldReject Hold Request On 2CallsBlock Request Hold On Holded1:Hold not PermitedUse Call WaitingTRUEThis value is true, call waiting function is also possbile.TRUE or FALSESession Expire1800setting for Session Expire interval90 3600 0:disableRinging Timeout180When ringing, this timer is over, rejects a call and becomes the call in6 3600Update RBT0Update RBT by every 18x response0: standard, 1: always update, 2: new dialogDial Sending Timeout30000INVITE expire (ms)500 32000Check Alias In Call List1Check if a certain alias is in call list whose line is busy, and if it is, not make0 : not check, 1 : checkabsence0:disablea new callRemove DASH On Alias1Whether or not to delete '-' in the midway of alias0 : remain, 1 : remove7VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
Use Silent Packet On Mute0Whether or not to send silent RTP packet in Mute to remote0 : not use, 1 : useEcho Canceller1use echo canceller0 :disable, 1:enableReject Invite During BT1reject invite during BT1 : Enable, 0: DisableResponse For Decline Inco603response for decline incoming call 488 or 603488 or 6030Set to timer when the network is disconnected during Call busy or500 32000 0:disableming CallCall Disconnect TimeOutRingingHOLDUse INVITE Filtering1Use Filtering the incomming invite0 :disable, 1:enableMode2543Setting for hod mode1: Inband hold (hold tone play to RTP without SIP signaling)Notice:2543 : c 0.0.0.0 (RFC2543)Value should be eqaul with SIP proxy value.3264 :Use sendonly, recvonly, inactive attribute (RFC3264)If the value is different, call hold can be impossible.0 : 2543 3264 mixeddefault : 2543Use Local Hold Tone1Whether or not to play Hold tone at the terminal in its own way0 : not use,1 : standard(c 0 received, local tone play)2: all mode(RFC3264, also local tone play))RTP Hold Multiframe40unit : ms (not recommend to use 20ms in time of using g729a)20 100RTP Hold Play Wait Time500In time of melody hold, play after a certain time.0 10000 0:disableEnable Hold With InactiveFALSEIf the value is True, SDP value in the hold invite will send a inactiveTRUE or FALSEThis value only can be used when Hold mode is 3264 or mixed.Notice:If the value do not match with SIP Proxy, normal Hold could be impossible.MWIEnable RTP Hold1No RTP send and set hold tone when receiving "sendonly"'1 : Enable, 0: DisableUse MWITRUEIf the value is True, it means MWI is enabled.TRUE or FALSEFalse means diabled.Use SubscribeTRUEIf the value is True, it means SIP SUBSCRIBE Method is registered in MWITRUE or FALSEServer.False means diabled.Subscribe ServerNULLSetting for Subscriber serverIP address or FQDNUnless the value is NULL, it sends SIP subscribe to the registerd server.Notice:If ths value of Use Subscribe is TRUE and Subscribe Server is NULL,it sends SIP SUBSCRIBE to the 1st Proxy.8VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
Subscribe Expire3600Setting for MWI SUBSCRIBE expire180 65535Unit: SecVMS AliasNULLSetting for MWI accountextention number or SIP Request-URIUnless the value is NULL, It will connect MWIand set it to the Request-URI of "INVITE" or "to Header"Notice:If Message-account is set in SIP NOFITY Method from MWI server,VMS Alia will be renewed.TRANSFERUse Transfer Target Hold1Whether or not to send Hold Request to Transfer Target before Transferor0 : not use, 1 : useUse Consultation Transfer1Whether or not to use the function of Consultation Transfer x0 : not use, 1 : useUse Blind Transfer1Whether or not to use the function of Blind Transfer (Unattended Transfer)0 : not use, 1: useUse 100 NOTIFY1Whether or not to send Transferee 100Trying NOTIFY to Transferor0 : not use, 1: useUse Attended Transfer On I1When WPU-7700 has to calls and current talking call is "incomming call",0 : not use, 1: usesends REFERncomming Callyou can disable attended transfer by setting this entry to '0'Use Contact For Refer To1Whether to make Refer-To header refering to Contact Header or to SIP URL1: Refer to Contact, 0: Refer to SIP URLUse Attended Transfer On1In case of 2 calls, if 1st call is busy, not to connect to attended transfer.1 : enable transfer, 0 : disable transfer0In case of receiving BYE before receiving NOTIFY(200) after transferer sends0 : disable, 1 : enableof Transfer TargetCall SwitchCheck BYE After Referrefer, mark transfer failEnable Enterprise Blind Tra0Set to minimalize the UI for transfer0 : disable, 1 : enableUse Forward0Whether or not to use forwarding feature.1 : Use Forward, 0 : Nonuse ForwardMode0Setting forward mode when Use Forward is enable0 : DisablensferFORWARD1 : All2 : Busy3 : No AnswerPhone NumberNULLset the forward number0 30No Answer Timeout10Set time of no response when No Answer mode. Forwarding, if this time is2 3600over.Disable Call Waiting On Busy0In case Forward is Busy mode, when a call is connected, Forward is OK as0 : disable, 1 : enablewell.9VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
INITIAL BUSYSendkey Block Timeout1Roaming Disable0Whether or not to use roaming feature1: disable, 0 : enableTry Beacon Signal Level-77Setting for Roaming-103 -64MODEROAMINGSet to input prohibit timeout value of Send Key after answer Incoming0 5callRoaming will be started when Beacon signal is lower than default value.Try Rx Signal Level-77When Tx Error occurs over value Count, attempt Roaming-103 -64Roaming Disable On Callin0Set to disable roaming when the line is engaged0 : disable, 1 : enablePrecedence 00set priority of ToS precedence 00 7Precedence 16set priority of ToS precedence 10 7Precedence 26set priority of ToS precedence 20 7Precedence 36set priority of ToS precedence 30 7Precedence 46set priority of ToS precedence 40 7Precedence 56set priority of ToS precedence 50 7Precedence 66set priority of ToS precedence 60 7Precedence 76set priority of ToS precedence 70 7EnableTRUETrue using NetworkTRUE or FALSEgTOS WMMNETWORK(1,2,3,4)1. False Network1 disabled.Notice: Network 1 cannot be deleted or edit.This only can be edited by Auto Provisioning.SIP OutBound ProxyNULLSettiing for SIP outbound ProxyIP address or FQDNNotice: SIP Outbound proxy should be set to every individual Networkprofile.SSIDvoipSetting for SSID in Network 132 StringWhen the phone searching AP, the SSID will be appear."voip" is a default valueEnable DHCPTRUETrue Using DHCPTRUE or FALSENotice: False Put the IP mannuallyAddress0.0.0.0Setting for Phone IP addressIP addressNotice: If Enable DHCP value is True, this value cannot be applied.Netmask255.255.255.0Setting for NetmaksIP addressNotice: If Enable DHCP value is True, this value cannot be applied.10VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
Gateway0.0.0.0DNS10.0.0.0Setting for GatewayIP addressNotice: If Enable DHCP value is True, this value cannot be applied.Setting for 1st DNSIP addressNotice: If Enable DHCP value is True, this value cannot be applied.DNS20.0.0.0Setting for 2st DNSIP addressNotice: If Enable DHCP value is True, this value cannot be applied.Security2Selecting AP authentication security0 : none, 1 : WEP, 2 : WPA-PSK, 3 : WPA2-PSK,Notice: Phone and AP should be use same type of authentication security.4 : WPA-EAP, 5 : WPA2-EAPWEP Bits0Setting for WEP KEY bitNotice:Phone and AP should be use same WEP key0 : 64 bit, 1 : 128bitDefault WEP Key1Setting for default WEB Key index1 4WEP Key1NULLWEP Key2NULLWEP Key3NULLNotice: Phone and AP should be use same WEP keySetting 1st WEB Key index87 StringNotice: Phone and AP should be use same WEP keySetting 2nd WEB Key index87 StringNotice: Phone and AP should be use same WEP keySetting 3rd WEB Key index87 StringNotice: Phone and AP should be use same WEP keyWEP Key4NULLSetting 4th WEB Key index87 StringNotice: Phone and AP should be use same WEP keyPost Authentication Mode8021X Name0NULLSetting for 802.1x Authentication0 : None, 1 : WEB, 2 : 8021X-MD5, 3 : 8021X-TLS,Notice:Phone and AP should be use same ID, Password and Authentication4 : 8021X-PEAP, 5 : 8021X-TTLSSetting ID for 802.1x Authentication50 StringNotice:Phone and AP should be use same ID8021X PasswordNULLSetting password for 802.1x Authentication50 StringNotice:Phone and AP should be use same passwordWPA PSK PassPhraseNULLSetting PassPhrase for WPA PSK Key63 StringNotice: Security should be selected as WPA PSK.Do not Set WPA PSK Pass Phrase, if you use PSK KeyShould be set Only WPA PSK Key field.WPA PSK KeyNULLSetting for WPA-PSK keyNotice:Security should be selected WPA PSK.Do not63 Stringset WPA-PSK Key, if you use WPA-PSK PassPhrase,Notice:A pass-phrase is a sequence of between 8 and 63 ASCII-encodedcharacters but WPU Phone UI Menu support only 18 characters.11VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
Proactive Key CachingFALSEThis entry can be used to enable proactive key caching which is alos knownTRUE or FALSEas opportunistic PMKSA caching for WPA2.Enable by setting this to TRUE.DiffServ Signal46Setting DSCP(Differentiated Service Code Point) for DiffServ Signal0 63DiffServ Media46Setting DSCP(Differentiated Service Code Point) for DiffServ Media0 63WMMTRUESetting for WMMTRUE or FALSEJitter Buffer Size60Bell ID1True WMM enableSetting for Jitter buffer size20 200units: msSetting for bell soundSimple Bell : 0x00000001 0x00000006Simple Ball / Sadness Ball / Glad Ball / Happy BallSadmess Bell : 0x00000101 0x00000106Notice:should be set the value by hexadecimalGlad Bell : 0x00000201 0x00000210Happy Bell : 0x00000301 0x00000307Bell Volume6Mode0Setting for bell volums0 12Notice:0 No soundDTMFDTMF Transmission System0 : In-Audio1 : SIP-INFO2 : rfc28333: In-Audio SIP-INFODuration100Duration value of SIP INFO, ms0 1000RFC2833 Volume10volume value of 2833 Packet0 63RFC2833 Payload Type101Payload type for RFC283396 127RFC2833 Packet Count10DTMF Packet count3 20RFC2833 End Count9DTMF End packet count3 20Enable Auto DTMF Mode0Decision method of DTMF transmission system0 : Transmit DTMF with entry "Mode" of Section[DTMF]unconditionally.1 : Iftelephone-event in sdp, set RFC2833, if not, setinband. (can define sip info in sdp by the vendor. In casethere is such payload type in Sdp offer, can select sdpanswer according to the preferred order.)CALLER IDUse Caller ID OnOff1Use or not use the function of Caller ID On/Off1: Use, 0: Not UseEnable Caller ID1Whether or not send CID after Enable0 : disable, 1 : enableAnonymous Displayname"Anonymous"String to be used in display name of From in time of INVITE Request with0 30 stringcaller id off12VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
Use Update Caller ID0In case cid changes in the midway of call, update cid or not0 : not use, 1 : useHide Displayname0Whether or not mark display name in time of Caller ID display0 : show, 1 : hideUpdate Caller ID After Tran1transferee and transfer target display real talking remote party after transfer0:off(remain call log also)1:onsfer2:update display onySMSMessage ServerNULLMessage server address0 50 stringMessage Content Type0SIP MESSAGE Content-Type0 : text/planUse Register0register to IM server0 : disable, 1 : enableRegister Expire3600IM expire60 86400SMS PrefixNULLSet to SMS Prefix0 12Receive Display0Set to indication for SMS on the display when receive SMS0 : disable, 1 : enableInform Interval1SMS indication interval0 2Auto Save0Set to Auto save SMS0 : disable, 1 : enableSpam Num0 9NULLSet to SPAM number0 32 stringSpam Str0 9NULLSet to SPAM String0 32 stringUse Option 20Use DHCP option 2 (Time offset)0 : disable, 1 : enableUse Option 420Use DHCP option 42 (NTP handout)0 : disable, 1 : enableUse Option 660Use DHCP option 66 (TFT server name)0 : disable, 1 : enableUse Provision0Use provision or not use0 : Disable, 1 : EnableRequest Mode2Select Request Protocol0 : HTTP1 : text/htmlDHCP OPTIONPROVISION1 : HTTPS2 : TFTPFirmware URLNULLIP or Domain of Firmware(Do not input protocol)IP address or FQDNFirmware VersionNULLversion of firmware0 30 stringFirmware NameNULLName of firmware0 30 stringEnable HTTP Keep Alive1KeepAlive ON/OFF0 : Disable, 1 : EnablePhonebook NameNULLSetting for phonebook file such as csv type128 StringEnter the phone book file name.Load that file on the TFTP server that the WPU-7700 pulls its configurationfrom and it will update when you turn the phone off and on.This entry is added from version 2.4.0UNICODEUse Unicode On SMS0Whether or not to use unicode(utf-8) with content of SMS0 : local charset13VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
1 : utf-8Use Unicode Displayname0Whether or not to use unicode(utf-8) with content of Displayname0 : local charsetPhone Number1 3NULLSet to Call block number0 32 stringSIP Response CodeNULLSet to SIP Response code block0 9991 : utf-9CALL BLOCK14VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: 44 (0)1245 808195 Fax: 44 (0)1245 808299
Timer B 0 SIP Timer B (INVITE Transaction timeout timer) 500 : 65535 Timer F 0 SIP Timer F (non-INVITE Transaction timerout timer) 500 : 65535 Use_User_Agent 0 Add User-Agent Header in SIP Message or not 0 : not use, 1 : use User_Agent_Name "WPU-7800" String in User-Agent Header 1 60 string Use_Version_On_User_Agent 0 Add version in User-Agent .
Marketing (MM) Admission year 2021 WPU - School of Management (PG) . He is an approved research guide from five Universities and so far ten PhD'swere . I would describe the MIT-WPU University as exciting and dynamic. The best thing about being a student here is the
Issue of orders 69 : Publication of misleading information 69 : Attending Committees, etc. 69 : Responsibility 69-71 : APPENDICES : Appendix I : 72-74 Appendix II : 75 Appendix III : 76 Appendix IV-A : 77-78 Appendix IV-B : 79 Appendix VI : 79-80 Appendix VII : 80 Appendix VIII-A : 80-81 Appendix VIII-B : 81-82 Appendix IX : 82-83 Appendix X .
Appendix G Children's Response Log 45 Appendix H Teacher's Journal 46 Appendix I Thought Tree 47 Appendix J Venn Diagram 48 Appendix K Mind Map 49. Appendix L WEB. 50. Appendix M Time Line. 51. Appendix N KWL. 52. Appendix 0 Life Cycle. 53. Appendix P Parent Social Studies Survey (Form B) 54
from Rutgers, The State University 32,000 WPU Small Business Development Center This award supports funds for the WPU Small Business Development Center, which provides . alkynes with unactivated ketones, ethers, alcohols and aldehydes. The development of new synthetic methodologies based on this approach promise to be very useful.
Appendix H Forklift Operator Daily Checklist Appendix I Office Safety Inspection Appendix J Refusal of Workers Compensation Appendix K Warehouse/Yard Inspection Checklist Appendix L Incident Investigation Report Appendix M Incident Investigation Tips Appendix N Employee Disciplinary Warning Notice Appendix O Hazardous Substance List
The Need for Adult High School Programs 1 G.E.D.: The High School Equivalency Alternative 9 An Emerging Alternative: The Adult High School Ciploma 12 Conclusion 23 Appendix A -- Virginia 25 Appendix B -- North Carolina 35 Appendix C -- Texas 42 Appendix 0 -- Kansas 45 Appendix E -- Wyoming 48 Appendix F -- Idaho 56 Appendix G -- New Hampshire .
Appendix 4 . Clarification of MRSA-Specific Antibiotic Therapy . 43 Appendix 5 . MRSA SSI . 44 Appendix 6 . VRE SSI . 62 Appendix 7 . SABSI related to SSI . 74 Appendix 8 . CLABSI – Definition of a Bloodstream Infection . 86 Appendix 9 . CLABSI – Definition of a MBI -related BSI . 89 Appendix 10 . Examples relating to definition of .
The Korean language is relatively homogeneous and the dialects from different areas can be mutually intelligible to a great extent. Nevertheless, the dialects of Korean exhibit considerable variety in phonology, morphology, and vocabulary. They are finely differentiated into a number of areas based on regional differences. There is no obvious correlation between the modern dialects and the .
