Manuals User Manuals Simplified.KOAMTAC Bluetooth Barcode Scanner KDC270 User GuideDecember 25, 2021December 27, 2021Home » KOAMTAC » KOAMTAC Bluetooth Barcode Scanner KDC270 User GuideKOAMTAC Bluetooth Barcode ScannerKDC270 User Guide
Contents [ hide1 What’s in the Box?2 Powering On/Off3 Additional Accessories4 KDC270 Models5 Basic Operation6 Bluetooth Profiles Explained7 Pairing & Connecting8 Pairing Barcodes9 Using Keyboard Wedge10 KTSync & SDK11 KOAMTACON12 KDC270 Diagram13 Specs14 Helpful Barcodes15 Documents / Resources15.1 Related Manuals /ResourcesWhat’s in the Box?KDC270Micro USB CableProtective Rubber BootKDC LanyardQuick ManualKOAMTACON Guide
Powering On/OffPower OnPress and hold the SCAN button for 3 seconds.Power OffPress and hold the SCAN and DOWN buttons for 3 seconds.Additional AccessoriesWaterproof Finger Trigger GloveRing Scanner1-Slot and 4-Slot Charging Cradles650mAh BatteryMicro USB CableProtective Rubber BootKBD401K Bluetooth Classic DongleKDC270 ModelsKDC270Li 1D Laser Bluetooth Barcode ScannerKDC270Di 1D CCD Bluetooth Barcode ScannerKDC270Ci 2D Imager Bluetooth Barcode ScannerBasic Operation1. Aim the KDC directly at the barcode and press the SCAN button, ensuring the beam covers the barcode horizontally.2. A successful scan (A) will sound 1 beep, show a green LED, and display the scanned info on the screen. An unsuccessful scan (B) willsound 2 beeps, show a red LED, and display “Read Failed” on the screen.
Bluetooth Profiles ExplainedPairing & Connecting1. Navigate to the Bluetooth setting on the host PC, Mac, Smartphone, or Tablet.2. Ensure that Bluetooth is enabled on the host device and searching for devices.3. Using the KDC, scan the pairing barcode that corresponds to your desired Bluetooth profile. If you are unsure which Bluetooth profile isright for you, please refer to the previous panel.4. Check the list of available Bluetooth devices on your host device.5. From the list, select KDC270 listed by serial number in brackets that matches the serial number found on the back side of the KDC270.6. In HID mode, KDC270 is now ready to use.7. To complete connection in SPP/MFi mode, launch KTSync or your application and select KDC270.* The KDC270 will beep when successfully connected.Pairing Barcodes
Using Keyboard WedgeKeyboard wedge allows you to use your KDC as a keyboard. The HID profile works as keyboard wedge by default. When using SPP or MFi,KTSync provides a keyboard wedge function when KTSync keyboard is enabled. Please refer to the KDC Reference Manual for detailedinstructions to enable KTSync keyboard.1. Ensure that the KDC is connected to the host using the HID profile or the KDC is connected via KTSync keyboard using SPP/MFiprofiles.2. Open any application on the host device that contains a text field you want to populate.3. Tap the text field in the application.4. Scan any barcode with the KDC.5. The barcode data will then populate in the text field.KTSync & SDKKTSync is a program which communicates with the KDC via Bluetooth. It enables users to read and store data. KTSync is compatible withiOS, Android, Windows, and Mac. It also supports wedging and downloading data from the KDC. For more information about KTSync,please visit: www.koamtac.com/support/downloads/applicationsThe Software Development Kit (SDK) is the perfect solution for creating a custom application to collect data utilizing your KDC. TheKOAMTAC SDK covers all major development platforms: Android, iOS, Tizen, Windows, Xamarin, and Cordova. Developers may takeadvantage of the complimentary SDK and enjoy the full benefits of the KOAMTAC Developer Program. For more information regarding theKOAMTAC Developer Program or to request the latest SDKs, visit: www.koamtac.com/support/downloads/sdk or e-mailsdk@koamtac.com.KOAMTACONThe first application suite of its kind, KOAMTACON is a data collection cloud suite designed specifically to be used with KDC Bluetoothbarcode scanners, RFID readers, and Magnetic Stripe Readers (MSR) to collect data in any situation.With apps ranging from ticketing to warehouse management, KOAMTAC has you covered. It’s never been so easy to collect data viabarcodes, RFID, or Magnetic Stripe.KOAMTACON is:Simple to maintainEasy to useCloud-basedCompatible with any deviceFor more information please visit: www.koamtacon.comKDC270 Diagram
SpecsFunctionalityMemory Flash ROM: 256KB Program, 8MB User Data Memory RAM: 64KB Can store more than 400,000 Barcodes (EAN-13)Wedging & SynchronizationStore to a file or transfer to an application Keyboard wedge function Add-on prefixes and suffixes Barcode option selectionScan Range (10mil Code39)Laser: 1.97″ to 7.48″ (50 mm to 190 mm)CCD: 2.17″ to 11.81″ (55 mm to 300 mm)Imager: 1.81″ to 9.68″ (46 mm to 246 mm)InterfacesBluetooth V2.1 EDR, Class 2, HID/SPP/MFi USB to Serial (Micro USB port) USB HID/Flash MemoryUser EnvironmentIngress Protection Rating: IP65 Drop Spec: 5′ (1.5 m) Operating: 14 F to 122 F (-10 C to 50 C) Storage: -4 F to 140 F (-20 C to 60 C)Humidity: 5% to 95% (non-condensing)Supporting OSAndroid / iOS / Mac OS X / WindowsHelpful BarcodesVisit our website for more information
116 Village Blvd, Ste 305, Princeton, NJ 08540 1 609-256-4700p 1 609-228-4373finfo@koamtac.com www.koamatc.comDocuments / ResourcesKOAMTAC Bluetooth Barcode Scanner KDC270 [pdf] User GuideKOAMTAC, Bluetooth, Barcode Scanner, KDC270Related Manuals / ResourcesKOAMTAC KDC200 Bluetooth Barcode Scanner User GuideKOAMTAC KDC200 Bluetooth Barcode Scanner User Guide Product Introduction TheKDC200 Bluetooth barcode scanner is an ultra-lightweight and KOAMTAC KDC100 USB 10 Barcode Scanner User GuideKOAMTAC KDC100 USB 10 Barcode Scanner SDK The Software Development Kit (SDK)is the perfect solution for creating KOAMTAC KDC300 Bluetooth Barcode Scanner User GuideKOAMTAC KDC300 Bluetooth Barcode Scanner Product Introduction The KDC300Bluetooth barcode scanner is an ultra-lightweight and compact 2D KOAMTAC Bluetooth Barcode Scanner KDC180 User GuideKOAMTAC Bluetooth Barcode Scanner KDC180 User Guide What's in the Box? KDC180 Micro USB Cable Manuals ,homeprivacy
KDC270Li 1D Laser Bluetooth Barcode Scanner KDC270Di 1D CCD Bluetooth Barcode Scanner KDC270Ci 2D Imager Bluetooth Barcode Scanner Basic Operation 1. Aim the KDC directly at the barcode and press the SCAN button, ensuring the beam covers the barcode horizontally. 2.
1 unitech MS852B Bluetooth 2D Barcode Scanner User Guide 1.1 How to turn on / turn off the scanner 1.2 Charging the Scanner 1.3 How to pair the scanner with the cradle 1.4 Scanner type 1.5 Operation Mode 1.6 Scan Mode 1.7 Aimer Mode 1.8 Mobile Phone Read Mode 1.9 Bluetooth 1.10 System Reset & Info 1.11 Data & Memory 1.12 Auto Power Off After Idle
2. Is the scanner dirty of are there water droplets on its surface? If the scanner scans the barcode, but you still have to press a key to enter it: 1. You need to program a suffix for the scanner (Enter/Return). If the scanner won't read the barcode at all: 1. Scan the sample barcode. If the scanner reads the sample barcode, check that your .
Automatically scan a barcode when seated in the Charging Dock or Charging Stand. 1. Pair and connect the *2D scanner to your host device prior to placing the scanner in Auto Mode. 2. Scan the barcode to confirure the scanner to operate in Auto Mode. The barcode is included on the bottom of the Charging Dock and Charging Stand.
More to one —several scanner to one receiver If you have 2 scanners: scanner A, scanner B, 1, Plug the receiver to your computer 2, Match for the scanner A: A scan the "Match" Barcode. 3, Unplug the receiver and Plug the receiver again. 4, Match for the scanner B: B scan the "Match" Barcode.
barcode, which will be located at the bottom of almost every page of this manual. The CT10 Barcode Scanner will respond with three beeps (tone descending from high to low), and its LED indicator becomes purple and go off quickly after reading the barcode. Enter Setup For setting scanner parameters, see "Read a Setup Barcode" below.
This wireless barcode scanner base in USB 3.0,It can transmit data in hight-speed。 This wireless barcode scanner have flash-rom,It can save data when the scanner not connect base station or terminal。 It can transmit 150m Hight-performance 1D or 2D scan engine,It can read barcode speedy。
Barcode-Scanner LS6320E Best.-Nr. 1196333 Bestimmungsgemäße Verwendung Verwenden Sie den Barcode-Scanner zum schnellen und zuverlässigen Lesen gängiger Barcodes, wie z.B. UPC, EAN oder JAN. Die gescannten Codes können Sie sofort am angeschlossenen Computer in Dokumente und Formulare einfügen. Der Barcode-Scanner
interface (API) used in a GEANT4 application. A simple application will use concrete classes provided with the toolkit, the developer will provide the detector description a primary generator (possibly using one of the general purpose ones provided with the toolkit), define the physics for the application (the physics list, possibly one of the few provided with the toolkit) and optional user .