YardCraft Gazebo Instruction Manual - Manuals
Skip to content Manuals User Manuals Simplified. YardCraft Gazebo Instruction Manual Home » YardCraft » YardCraft Gazebo Instruction Manual Gazebo Assembly Instructions Caution: Please read this before you proceed with assembly. Read all instructions before assembling and using this product
1. Select an ideal location. Set out all parts on a clean and level surface prior to assembly. Ideally the Gazebo should be set up in the desired location to avoid moving it after assembly. 2. Team Work. We recommend 4 adults and it may require 4 hours to fully assemble the Gazebo. If possible, please use safety ladders. 3. Use caution during the entire assembly process, especially when lifting large and heavy items. Also, use all safety precautions when using ladders. Keep children away from the assembly area. 4. Check all available parts. Before assembling the gazebo, check to make sure you have all the parts listed in the Parts List. 5. Important! Before attaching the canopy, make sure ALL BOLTS are tightened securely6. During assembly keep children away from the work area and the parts and tools. Once assembled, do not allow children to climb on the gazebo. 6. It is recommended that the Mosquito Netting be removed during strong winds, stormy and snowy conditions, and remove the accumulated snow on the roof. 7. Do not set this gazebo up near electric lines, trees, or slanted roofs. Use safety precautions at all times. ITEM DESCRIPTION QTY A Upper Central Connecter 1 B Lower Central Connector 1 C Long Top Bar 4 D Short Top Bar 4 E1 Left Lintel 4 E2 Right Lintel 4 F Connector 8 G1 Left Support Bar 4 ILLUSTRATION
G2 Right Support Bar 4 H Connector 4 I Corner Connector 4 J Post 4 K Top Connector 4
ITEM DESCRIPTION QTY. L Base 4 M Base Cover 4 N1 #1 Roof Borders 4 N2 #2 Roof Borders 4 O1 #3 Roof Borders 4 O2 #4 Roof Borders 4 P1 #1 Roof Borders 4 P2 #2 Roof Borders 4 Top Q R Panel Cover Lintel Cover 4 4 Short Bar R1 S Connector Mosquito Net 4 4 ILLUSTRATION
ITEM DESCRIPTION QTY (1) #1 Roof Panel 4 (2) #2 Roof Panel 4 (3) #3 Roof Panel 4 (4) #4 Roof Panel 4 (5) #5 Roof Panel 4 (6) #6 Roof Panel 4 ILLUSTRATION
ITEM DESCRIPTION QTY. T Stake 16 W1 Bolt \Flat Washer M6*15mm 149 W2 Bolt \Flat Washer M6*25mm 20 W3 Bolt M6*15mm 32 W4 Bolt \Flat Washer M6*35mm 8 X Spacer 20 Y Allen Wrench 1 Z Hook 40 ILLUSTRATION 1. Insert the Base Cover (M) into Post (J), and then attach Post (J) to Base (L) with Bolt (W1). See Fig.1.
2. Place the Hook (Z) into the track of the Lintel (E1/E2). Attach Left Lintel (E1) and Right Lintel (E2) to Connector (F) with Bolt (W1). At the same time, tach connection Piece (H) to Lintel (E1/E2) with Bolt (W1). Attach the Lintel Cover (R) to Connector (F) with Bolt (W1). See Fig.2. 3. Attach the Left Lintel (E1) and Right Lintel (E2) to Post (J) with Bolt (W3). See Fig.3.
4. Attach the Left Support Bar (G1) to Left Lintel (E1) and Post (J) with Bolt (W1attach the Right Support Bar (G2) to Right Lintel (E2) and Post (J) with Bolt (W1 See Fig.4. 5. Attach the Corner Connector (I) to the Left Lintel (E1) and Right Lintel (E2) with Bolt (W1). See Fig.5.
6. Attach Top Connector (K) to Long Top Bar (C) with Bolt (W1). See Fig.6. 7.1 Connect the Long Top Bar (C) and the Lower Central Connector (B) by bolt (AA). 7.2 Connect the Long Top Bar (C) and the Post (J) by the bolt (AA). See Fig.7. 7.3 Connect the Short Top Bar (D) and the Lower Central Connector (B) by bolt (AA). 7.4 Connect the Short Top Bar (D) and the Connector (H) by the bolt (AA). See Fig.7.
8. Attach Upper Central Connector (A) to Lower Central Connector (B) with Bolt (W1)See Fig.8. 9. Attach #1 Roof Supports (N1) to the Long Top Bar (C) with Bolt (W1). Attach #1 Roof Supports (N1) to the Short Top Bar (D) with Bolt (W1). Attach #2 oof Supports (N2) to the Short Top Bar (D) with Bolt (W1). Attach #2 Roof Supports (N2) to the Long Top Bar (C) with Bolt (W1). See Fig.9. Attach #3 Roof upports (O1) and #4 Roof Supports (O2) to the Long Top Bar (C) and the Short Top Bar (D) in the same way.
IMPORTANT: Make sure each screw installed on this step is attached to a spacer ( X ). Wait until the end of the installation of the roof panels before tightening all screws. If you do not wait and tighten from the beginning, you will not be able to correctly install all the roof panels. 10. Install the Roof Panels starting from left to right. Slide #1 Roof Panel (1) into position. Then overlap #2 Roof Panel (2) as shown inside #2 Roof Panel (2) into position. Attach #1 Roof Panel (1) and #2 Roof Panel (2) to #3 Roof Supports (O1) with a BW2) and Spacer (X). Slide #3 Roof Panel (3) into position. Attach #3 Roof Panel (3) and #2 Roof Panelo #3 Roof Supports (O1) with a Bolt (W2) and Spacer (X). Slide #4 Roof Panel (4) into position. Attach #4 Roof Panel (4) and #3 Roof Panelo the Short Top Bar (D) with a Bolt (W2) and Spacer (X). Slide #5 Roof Panel (5) into the position. Attach #5 Roof Panel (5) and #4 Roof Pan4) to #4 Roof Supports (O2) with a Bolt (W2) and Spacer (X). Slide #6 Roof Panel (6) into the position. Attach #5 Roof Panel (5) and #4 Roof Pan4) to #4 Roof Supports (O2) with a Bolt (W2) and Spacer (X). Repeat on each side. See Fig.10 Tighten all bolts (W2). 11. Attach #1 Roof Borders (P1) and #2 Roof Borders (P2) to the edge of the roof as shown with Bolt (W1). Attach the Short Bar Connector (R1) as shown with Bolt (W1). See Fig.11 (Fig.11.1——Fig.11.2).
12. Put Top Panel Cover (Q) on the top of Long Top Bar (C) and then insert Top Panel Cover (Q) into the gap between Upper Central Connector (A) and Long Top Bar (C). Then attach Top Panel Cover(Q) to Long Top Bar (C) with Bolt (W4). See Fig.12 (Fig.12.1——Fig.12.2).
13. Hang Mosquito Net (S) onto the inside track of the lintel. See Fig.13. 14. Adjust the position of the gazebo and anchor posts to the ground by inserting Stakes (T) into each hole in each Base Plate. See Fig.14. Your gazebo is now completely assemble Contents [ hide 1 File Downloads 2 Related Manuals File Downloads YardCraft Instruction Manual Download [optimized] Gazebo Download Related Manuals 1. Deluxe Gazebo Instruction Manual Deluxe Gazebo Instruction Manual KC 42768531 1. Parts 2. WARNING. 2. COOL Spot BBQ Grill Gazebo 8ft x 5ft with Hard Top Instruction Manual COOL Spot BBQ Grill Gazebo 8ft x 5ft with Hard. 3. Wood Gazebo With Aluminum Roof YM12810X Installation And Operation Instruction Wood Gazebo With Aluminum Roof YM12810X Installation And Operation Instruction. 4. Allen Roth GF-12S004B 12 FT x 10FT Gazebo User Manual Allen Roth GF-12S004B 12 FT x 10FT Gazebo User Manual. 5. PopupShade 13ft. x 13ft. One Push Gazebo User Manual PopupShade 13ft. x 13ft. One Push Gazebo User Manual –. 6. PopupShade 13ft. x 13ft. One Push Gazebo User Manual User Manual 13 ft. x13 ft. One Push Gazebo Setting.
1. Deluxe Gazebo Instruction Manual Deluxe Gazebo Instruction Manual KC 42768531 1. Parts 2. WARNING. 2. COOL Spot BBQ Grill Gazebo 8ft x 5ft with Hard Top Instruction Manual COOL Spot BBQ Grill Gazebo 8ft x 5ft with Hard. 3. Wood Gazebo With Aluminum Roof YM12810X Installation And Operation Instruction Wood Gazebo With Aluminum Roof
Install the gazebo on level ground.Stakes are provided to secure the gazebo to the ground. Do not assemble the gazebo on sandy, muddy or loose soil, as stakes do not have enough anchorage in these types . Keep instruction manual for future reference. Keep the original packaging to store the gazebo. Periodically check and .
ROS/Gazebo based simulation of co-operative UAVs 5 Integration between ROS and Gazebo is provided by a set of Gazebo plugins that support many existing robots and sensors. Since the plugins present the same message interface as the rest of the ROS environment, a Gazebo user can write ROS nodes that are compatible with simulation, logged data, and
10'x10' Har d top Cedar Gazebo Instruction Manual . While this gazebo is manufactured to withstand winds through only the supplied ground stakes, in areas subject to frequent severe weather, securing the gazebo to a deck, concrete patio or footings should be considered.
Gazebo Assembly Manual Jan 10th, 2017 Revision #19 Toll Free 1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com Page 1 Thank you for purchasing a 10 ft Bayside Gazebo. Please take the time to identify all the parts prior to assembly. The parts list can be found on Page 2 of this Manual. Sorting parts
The hardtop gazebo must be ANCHORED by appropriate screws based on the ooring where is being anchored to. 4 OPERATION 1. Hard top gazebo is a four-season products, meaning that it may be left up year-round. However, any . D E F F1 H A
No trate de ensamblar el gazebo en condiciones de viento o mojadas. No coloque su gazebo en un áreaal viento excesivo. Si usa herramientas eléctricas o una escalera, siempre siga las instrucciones de seguridad del fabricante. Objetos calientes, como una parrilla recién usada, sopletes, e
gazebo and insert the lower leg poles (d) into the upper corner poles (a) and (b). Secure the connection with bolts and plastic caps (i). STEP 10 Once erect, ensure the Butterfly gazebo is firmly secured to a stable surface, you can use feet bolts (l) if desired. p a a b b o c c p p p k k o o
not know; am I my brother’s keeper?’ (Genesis 4:9) N NOVEMBER 2014 the Obama administration in the United States announced an extension of relief for immigrant families, prompting one cartoonist to caricature ‘an immigrant family climbing through a window to crash a white family’s Thanksgiving dinner’ with the ‘white father unhappily telling his family, “Thanks to the president .
