ISO7 Cleanroom - Remred.space
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 1/12 SERVICE DATASHEET ISO7 Cleanroom PROJECT TITLE - PROJECT REF. FAC2020 PREPARED BY REMRED Space Technologies Ltd. SUPERVISOR Viktória Katona, viktoria.katona@remred.hu ISSUE 01 00 DATE OF ISSUE 10/01/2020 STATUS Issued TYPE Service Datasheet, Non-Confidential REFERENCE FAC2020-RR-PQA-FI-003 01 00 CUSTOMER(S) - CONTRACT REF. - CUSTOMER ID. - Template file ref.: QUA2020-RR-PQA-SS-001 i0.1 @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 1
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 2/12 APPROVAL Signatures Issue 1.0 Date 10/01/2020 Author(s) Reviewed by Approved by Viktória Katona Anna Baranyai István Apáthy DISTRIBUTION LIST Company N/A Name No. of copies N/A N/A REMRED archives 1 CHANGE LOG Reference FAC2020-RR-PQA-FI-003 01 00 Date Issue Revision 10/01/2020 1.0 1 Page Paragraph(s) CHANGE RECORD Issue: 1.0 Reason for change Revision: 1 Date N/A (initial release). @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 2
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 3/12 TABLE OF CONTENTS 1. Purpose and Scope. 4 2. Application and Key Features. 5 2.1. Application.5 2.2. Key features.5 3. Accreditation and Audits. 6 4. ANNEX A – ISO7 Cleanroom. 7 5. List of Abbreviations. 9 6. List of Figures. 10 7. List of Tables. 11 8. References. 12 8.1 Applicable and Normative Documents. 12 8.2 Reference Documents. 12 @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 3
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 4/12 1 Purpose and Scope The present document provides detailed technical information about the ISO7 Cleanroom for space engineering related activities operated by REMRED Space Technologies Ltd. used for ECSS-conform space equipment production and assembly in the following cases: n Space equipment soldering activities; n Space equipment assembly activities. The definitions and glossary of terms from ECSS-S-ST-00-01C [AD 1] apply to this document. Figure 1 – The ISO7 Cleanroom and ISO8 airlock @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 4
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 5/12 2 Application and Key Features 2.1 APPLICATION Space equipment components cleaning and preparation Space equipment electronics ECSS-conform soldering Space equipment assembly activities Space equipment flight unit storage 2.2 KEY FEATURES ISO7 validated environment with environment control and monitoring system Temperatures, humidity, air pressures and events are measured and logged Calibrated Portable Airborne Particle Counter ISO8 validated access airlock system and material airlock box Temperatures, humidity, air pressures and events are measured and logged ECSS conform soldering station including Stereozoom soldering microscope Soldering station with temperature control Fume extractor Digital soldering tip measurement unit Calibrated portable airborne particle counter Purified N2 available for cleaning purposes Space equipment assembly station including Assembly tools Calibrated torque drivers Calibrated torque meter Calibrated portable airborne particle counter Purified N2 available for cleaning purposes Safe and controlled storage area for any space flight units ESD-safe working environment with ESD-tester station High level of safety assurance The Cleanroom is located at a closed, guarded site with limited number of access Every area is video controlled Any access to the Cleanroom area is logged ECSS certified soldering personnel and inspectors are available upon request through our partners @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 5
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 6/12 3 Accreditation and Audits Table 4 – Accreditation and Audits Code Title Type Validity Remarks ISO 9001:2015 Quality management systems Accrediation planned N/A Accreditation is in progress ISO 17025:2018 General requirements for the competence of testing and calibration laboratories Accrediation planned N/A Accreditation is in progress ECSS-Q-ST-20-07C [AD 2] Quality and safety assurance for space test centres Audit by ESA N/A Audit was performed in 2018 @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 6
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 7/12 4 ANNEX A – ISO7 Cleanroom You find here the Vibration Test System related mechanical interface information for designing the mount of the test item and related accelerometers. Figure 2 – Cleanroom control and monitoring system (in the ISO8 airlock) Figure 3 – Cleanroom soldering workstation (with environmental parameter indicators on the wall) @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 7
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 8/12 Figure 4 – Cleanroom cleaning and assembly workstation with material airlock box @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 8
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 9/12 5 List of Abbreviations AD Applicable Documents ECSS European Cooperation for Space Standardization RD Reference Documents @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 9
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 10/12 6 List of Figures Figure 1 – The ISO7 Cleanroom and ISO8 airlock. 4 Figure 2 – Cleanroom control and monitoring system (in the ISO8 airlock).7 Figure 3 – Cleanroom soldering workstation (with environmental parameter indicators on the wall). 7 Figure 4 – Cleanroom cleaning and assembly workstation with material airlock box. 8 @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 10
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 11/12 7 List of Tables Table 1 – Accreditation and Audits. 6 Table 2 – Applicable and Normative Documents.12 Table 3 – Reference Documents.12 @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 11
Tile: ISO7 Cleanroom Datasheet Company: REMRED Space Technologies Ltd. Department: Facilities RR-FAC Contact: W: remred.hu T: 36-1-392-2222 Issue: 1.0 Ref.: FAC2020-RR-PQA-FI-003 Page: 12/12 8 References 8.1 APPLICABLE AND NORMATIVE DOCUMENTSS Table 2 – Applicable and Normative Documents AD Title Reference Version [AD 1] ECSS system - Glossary of terms ECSS-S-ST-00-01C 1 Oct 2012 [AD 2] Space product assurance - Quality and safety assurance for space test centres ECSS-Q-ST-20-07C 1 Oct 2014 8.2 REFERENCE DOCUMENTS Table 3 – Reference Documents RD Title Reference Version [RD 1] - - - @REMRED 2020 The copyright in this document is vested in REMRED Ltd. This document may only be reproduced in whole or in part, or stored in a retrieval system, or transmitted in any form, or by means of electronic, mechanical, photocopying or otherwise, either with the prior permission of REMRED Ltd. 12
Page: 7/12 7 4 ANNEX A - ISO7 Cleanroom You find here the Vibration Test System related mechanical interface information for designing the mount of the test item and related accelerometers. Figure 2 - Cleanroom control and monitoring system (in the ISO8 airlock) Figure 3 - Cleanroom soldering workstation (with environmental parameter
7. In front of the mirror, make sure cleanroom garments are tuck in properly. 8. Put on the cleanroom gloves. 9. Step on the sticky mat to remove any contaminants adhering to soles of booties. 10. Enter cleanroom through air shower. B. Degowning procedure (Removing cleanroom garments) 1. Exit from the cleanroom to changing room through air .
Along with safety, particle control is a fundamental part of the cleanroom environment. The cleanroom is a combination of class 100 and class 10,000 cleanroom space. To maintain cleanliness all garments will conform to a class 100 requirements. Particle counter is used for routine cleanliness check throughout the whole area in the cleanroom.
tracks. All joints must be sealed with cleanroom compatible neutral grade silicone sealant. All cutouts must be covered with a suitable track. II.1.3. Ceiling: The cleanroom ceiling must be at a height of 2700 mm or higher from the floor of the cleanroom. The ceiling height of the lab space housing the Class-1000 cleanroom is 5250 mm.
The Cleanroom Design Guidelines describe a number of successful and efficient design practices specifically appropriate for cleanroom facilities. Based on actual measurement of operating cleanroom facilities and input from cleanroom designers, owners and operators, the Cleanroom Design Guidelines offer many successful
cleanroom tool, and a final product that is competitive. Cover All the Bases. Specific needs must be examined during the cleanroom conceptual design and review stage. The cleanroom design and construction team that you build a relationship with needs to have program-specific reviews of the actual construction details and requirements of the room.
Cleanroom and traditional code. Errors left behind by Cleanroom correctness verification, if any, tend to be simple mistakes easily found and fixed by statis- tical testing, not decp design or interface errars. Cleanroom errors are not only infrequent, but usually simple as well. Highhghts of Cleanroom projects reported in
7 Thai FDA Presentation by Usa Panpunuan 7 Design, Construction and Cost Estimate of Cleanroom for Pharmaceutical Industry zIt is clear that a cleanroom is a room that is clean !!! zA cleanroom now has a special meaning !!! Federal Standard 209 E "A room in which the concentration of airborne particles is controlled and which contains
Storage Systems for Automotive Applications Wasim Sarwar1*, Timothy Engstrom1, Monica Marinescu1, Nick Green2, Nigel . As with PHEVs, in a large ESS the use of active thermal management (system consisting of heating and cooling loop) provides good value, therefore a large thermal operating window is not required. Further, a comparatively shorter cycle life is sufficient in order to meet the .
