G. Charging System Light H. Oil Pressure Light J. Brake System Warning .

7 Child Restraints (LATCH) Your vehicle is equipped with LATCH anchors, and may have top tethers for use with a LATCH-compatible child restraint. If your child restraint is not compatible with the LATCH system, you may still use it by installing the child restraint with the safety belt system. Choose a child restraint that is appropriate for the child’s age and size (weight and height). See Section 1 of your Owner Manual. COMFORT Manual Seat Adjustments Height Adjustment To raise the driver’s seat, lift and release the front lever on the outboard side of the seat. Each time you raise the lever, the seat will move up. Repeat until the seat is at the desired height. To lower the driver’s seat, push down and release the lever. Repeat until the seat is at the desired height. Forward or Rearward Adjustment To move the front seats forward or rearward, lift and hold the bar under the front of each seat and manually slide the seat. Release the bar to lock the seat in place. Try to move the seat to ensure it is locked in place. Recliner To recline the front seats, lift the recline lever to release the seatback; then move the seatback to where you want it. Release the lever to lock the seatback in place. Press rearward on the seatback to ensure it is locked in place. See Section 1 of your Owner Manual. Power Seat Controls (if equipped) C A B To adjust the driver’s power seat, use the power seat controls located on the outboard side of the seat. Move the Seat Forward or Rearward Move the control (A) forward or rearward. Raise or Lower the Entire Seat Move the entire control (A) up or down. Raise or Lower the Front or Rear of the Seat Cushion Move the front or rear of the control (A) up or down. Adjust Lumbar Support Press the forward part of the switch (B) to increase support and the rearward part of the switch to decrease support. Recline or Raise the Seatback Lift the recline lever (C) and move the seatback. Release the lever to lock the seatback in place. See Section 1 of your Owner Manual.

8 Getting to Know Your HHR Heated Seats (if equipped) 2. Adjust the wheel to a comfortable position. The wheel can be moved up or down. 3. Push the lever all the way up to lock the wheel in place. See Section 3 of your Owner Manual. Climate Controls There is a heated seat control button located on the climate control panel for each front seat. Press the button once to turn the system on high. Both indicator lights will turn on. Press the button twice to turn the system on low. The lower indicator light will turn on. Press the button again to turn off the heated seat. See Section 1 of your Owner Manual. Tilt Steering Wheel Adjusting the Steering Wheel To adjust the position of the steering wheel: 1. Pull down the lever located on the left side of the steering column. A B C The climate control system includes the following features: Temperature: Turn the temperature knob (A) to raise or lower the temperature setting. (Air Conditioning): Press this button to turn on the air conditioning system. Fan: Turn the fan knob (B) to increase or decrease fan speed. (Off): Turn the fan knob to the Off position to turn the system off. Only the heated seats and the rear defogger will function when the fan knob is off. (Outside Air): Press this button to allow outside air to circulate through the vehicle. (Recirculation): Press this button to recirculate inside air throughout the vehicle. This mode keeps outside air from entering the vehicle.

9 Airflow Modes Turn the airflow control knob (C) to one of the following modes to change the direction of the airflow: (Vent): This mode directs air to the instrument panel outlets. (Bi-Level): This mode directs air to the instrument panel outlets and floor outlets. (Floor): This mode directs most of the air to the floor outlets and some air to the side window outlets and windshield. (Defog): This mode directs air to the windshield, side window outlets and floor outlets. Recirculation will not function in this mode. (Defrost): This mode directs most of the air to the windshield and some air to the side window outlets. Recirculation will not function in this mode. (Rear Window Defogger): Press this button to activate the rear window defogger. The defogger will shut off automatically after about 20 minutes. See Section 3 of your Owner Manual. Preventing Window Fogging To keep the vehicle glass fog-free, turn the airflow control knob to the (Defog) mode or the (Defrost) mode. Recirculation will not function in these modes, allowing outside air into the vehicle to help reduce moisture. See Section 3 of your Owner Manual. Shoulder Belt Height Adjustment A B To move the shoulder belt height adjuster down, push down the release button (A) using your thumb or finger and slide the adjuster to the desired position. To move the adjuster up, push up on the D-ring (B) from the bottom and slide the adjuster to the desired position. See Section 1 of your Owner Manual. Adjustable Front Head Restraints The head restraints on the front seats are adjustable. Press the button on the side of the post to adjust the head restraint. Slide the head restraint up or down. See Section 1 of your Owner Manual.

10 Getting to Know Your HHR ENTERTAINMENT Audio System Features While most of the features on your radio will look familiar, following are some that may be new: (Power/Volume): Press this knob to turn the system on or off. Turn the knob to adjust the volume. (Information): Press this button to switch the radio display between station frequency and time. It will also display additional text information related to the current FM-RDS or XM station, or MP3 song (if equipped). (Tune): Turn this knob to select radio stations or, when a CD is playing, to select a track or MP3 file (if equipped). Press the knob to display the tone control (bass/treble) or speaker control (balance/fade) setting. Turn the knob to adjust the setting. (Balance/Fade): Press this button, or the Tune knob, to adjust the speaker control. Turn the Tune knob to adjust the setting. BAND: Press this button to switch to AM, FM, or XM (if equipped). When playing a CD or portable audio player, press this button to play the radio instead. (Seek/Scan): Press the right or left arrow button to go to the next or previous radio station or, when a CD is playing, to the next track or MP3 file, or to the start of the current track or MP3 file (if equipped). To enter the scan mode, press and hold either arrow button for a few seconds. Radio stations will be scanned. Press either arrow button again to stop scanning. (Reverse): Press and hold this button to reverse playback quickly within a track or MP3 file (if equipped). (Forward): Press and hold this button to advance playback quickly within a track or MP3 file (if equipped). CD/AUX: Press this button to play a CD instead of the radio. Press again and the system will automatically search for a portable audio player. RDM (Random): Press this button to play CD tracks or MP3 files (if equipped) in random order. Press again to turn off random play. If equipped with a six-disc changer, a second press will enter random play of all discs. RPT (Repeat): Press this button to hear the current CD track again. Press again to turn off repeat play. EQ (Equalization): Press this button to select preset equalization settings. CAT (Category) (if equipped): Press this button to find XM stations within a desired category. Auxiliary Input Jack: A portable audio player can be connected to the auxiliary input jack located on the radio. Setting Preset/Favorite Stations Before setting your preset or favorite stations, shift the vehicle into Park

11 (automatic transmission) or into Neutral and set the parking brake (manual transmission). Note: Engaging in extended searching for specific audio stations or songs by using buttons and knobs — or giving extended attention to entertainment tasks — can lead you to look away from the road frequently or for prolonged periods, which may cause you to miss seeing things on the road that you need to see. Avoid engaging in extended searching for specific items while driving. To set up to 18 preset stations: 1. Turn on the radio. 2. Press BAND to select FM1, FM2 or AM. 3. Tune in the desired radio station. 4. Press and hold one of the six numbered pushbuttons until a beep sounds. 5. Repeat steps 2–4 for each pushbutton. Setting Favorite Stations (if equipped) Press the FAV (Favorite) button to go through up to six pages of any combination (AM, FM, or XM, if equipped) of favorite radio stations. On each page, up to six stations are available by using the six pushbuttons below the radio display. To set the number of favorite station pages: 1. Press the MENU button to display the radio setup menu. 2. Press the pushbutton below the FAV 1–6 label on the radio display. 3. Select the desired number of favorite station pages. 4. Press the FAV button. You may now begin storing your favorite stations for the chosen number of pages. To store favorite stations: 1. Tune in the desired radio station. 2. Press the FAV button to display the page where the station is to be stored. 3. Press and hold one of the six pushbuttons until a beep sounds. 4. Repeat the steps for each pushbutton on each page. Setting the Speed Compensated Volume (if equipped) With Speed Compensated Volume, the radio automatically adjusts the volume to compensate for road noise as vehicle speed changes. To set Speed Compensated Volume: 1. Set the radio volume to the desired level. 2. Press the MENU button to display the radio setup menu. 3. Press the pushbutton below the auto volume label on the radio display. 4. Press the pushbutton under the desired setting (Off, Low, Medium or High) to select the level of compensation. 5. The compensation will be set once the display times out after 10 seconds. Setting the Time To set the time (without date display): 1. Turn on the radio. 2. Press the (Clock) button until the hour numbers begin flashing on the radio display. Press the button again to adjust the minute numbers. 3. With either the hour or minute numbers flashing, use the (Tune) knob to select the time. 4. Press the Clock button again to set the currently displayed time.

12 Getting to Know Your HHR To set the time (with date display, if equipped): 1. Turn on the radio. 2. Press the (Clock) button. Or, if equipped, press the MENU button until the clock option is displayed; and then press the pushbutton located under the clock option label. The HR, MIN, MM, DD, YYYY labels will appear on the display. 3. Press the pushbutton under any of the labels to be changed. 4. Press the pushbutton again or the FWD button to increase the numbers. Press the REV button to decrease the numbers. Rotating the (Tune) knob also will increase or decrease the selected label. 5. Press the Clock or MENU button again to set the currently displayed time and date. MP3 Capability (if equipped) If your AM/FM stereo with CD has MP3 playing capability, a CD-R or CD-RW containing MP3 audio tracks will play automatically when inserted into the CD player. An MP3 label will be displayed. Portable Audio Device (if equipped) A portable audio device (iPod , Palm , MP3 player or other portable-type player) can be connected to the auxiliary input jack located on the radio. When connected, the radio automatically begins playing audio from the player over the vehicle speakers. To optimize volume, fully increase the volume on your device. Radio Data System (if equipped) When you tune in a Radio Data System (RDS) station, the station name and call letters will appear on the display instead of the frequency. RDS stations may also provide the time of day, a program type for current programming and the name of the program being broadcast. RDS features are available for use only on FM stations that broadcast RDS information. RDS relies on receiving specific information from these stations and will work only when the information is available. See Section 3 of your Owner Manual. Multiple-Disc CD Player (if equipped) With the in-dash 6-Disc CD Player, note that you cannot directly load a CD as in single-play systems. To load a CD(s): Press and release the LOAD button to load one CD. Wait for the display prompt before loading the CD. Press and hold the LOAD button for two seconds to load multiple CDs. Follow the display prompts to load each CD. Press the LOAD button again to cancel loading more CDs. To play a specific CD: Press the pushbutton below the arrow label on the display to select the desired CD number. To eject a CD: To eject the CD that is currently playing, press the EJECT button once. To eject all CDs, press and hold the EJECT button for two seconds.

13 If a CD is not removed after several seconds, it will be pulled back into the player automatically. Note: CDs with any affixed labels may jam in the CD player. Label a CD using a permanent marker. If more than one CD is inserted into the slot at one time, or if scratched or damaged CDs are played, the CD player could be damaged. When using the CD player, use only CDs in good condition without labels; load one CD at a time; and keep the CD player and the loading slot free of foreign materials, liquids or debris. XM Satellite Radio (if equipped) XM Satellite Radio offers more than 170 channels of digital-quality sound that goes wherever you go — coast to coast. XM displays song title, artist and entertainment genre. Activation fee and service subscription are extra. XM Satellite Radio service is based in the continental United States and Canada. For more information, visit XM online at www.XMradio.com or call 1-800-852-XMXM (9696). See Section 3 of your Owner Manual. See Section 3 of your Owner Manual. CONVENIENCE Audio Steering Wheel Controls (if equipped) The following audio controls are located on the steering wheel: – (Volume): Press the plus or minus button to increase or decrease the volume. (Seek/Scan): Press the up or down arrow to go to the next or previous preset radio station or, when a CD is playing, to the next or previous track. Press and hold the up or down arrow for one second to seek the next or previous radio station with a strong signal. (Mute): Press this button to mute the audio system. Press and hold this button for two seconds to activate voice on the OnStar system (if equipped). See Section 3 of your Owner Manual. Remote Vehicle Start (Automatic Transmission only) This feature allows you to start the engine from outside the vehicle by using the Remote Keyless Entry transmitter. (Normal transmitter range is within 200 feet of the vehicle.) The remote start capability can be turned on or off using the Driver Information Center. (See Driver Information Center.) After a remote start, the engine will run for about 10 minutes before turning itself off, but can be extended 10 minutes by performing another remote start sequence at any time. After two consecutive remote starts, no additional remote starts are allowed until the vehicle has been started with the ignition key. During a remote start, the vehicle’s climate control system heats or cools the vehicle interior to the same setting as when the vehicle was last turned off.

14 Getting to Know Your HHR Starting the Vehicle To remote-start the vehicle: 1. Aim the transmitter at the vehicle. 2. Press and release the (Lock) button on the transmitter. 3. Immediately press and hold the (Remote Start) button for about two seconds. 4. When the vehicle starts, the parking lamps will light and stay on while the engine is running. 5. Repeat these steps for a 10-minute time extension. After a remote start, the key must be inserted in the ignition and turned to the Run position before driving. Note: The Remote Vehicle Start feature will not operate if the key is in the ignition, a door or the hood is open, or the Check Engine light is illuminated on the instrument panel cluster. Canceling a Remote Start If you wish to turn off the engine instead of driving after a remote start, perform one of the following functions: Press and hold the button until the parking lamps turn off. Press and release the Hazard Warning Flashers button inside the vehicle. Press the button again to turn off the flashers. Turn the key in the ignition switch to the Run position and then off. The engine will automatically stop when time expires. See Section 2 of your Owner Manual. Exterior Lamps Automatic Headlamp System Your vehicle is equipped with an Automatic Headlamp System, which turns on the headlamps and other exterior lamps at dusk or when necessary. The exterior lamps also can be operated manually. Light Sensor The Automatic Headlamp System’s light sensor is located on top of the instrument panel. To ensure proper system operation, it’s important to avoid placing any objects on or near the sensor. Exterior Lamp Control Switch The exterior lamp control switch is located on the lever to the left of the steering column. The switch can be rotated to each of the following positions: (Headlamps): Turns on the headlamps, parking lamps and taillamps. (Parking Lamps): Turns on parking lamps and taillamps only. AUTO (Automatic Headlamp System): Automatically turns on Daytime Running Lamps in the daytime, and headlamps, parking lamps and taillamps at night or when necessary.

15 (On/Off): When operating in the AUTO position, a momentary turn of the lamp control switch to the position will turn off the Automatic Headlamp System and all of the exterior lights. The Driver Information Center (DIC) will display AUTO LIGHTS OFF. To activate the Automatic Headlamp System, turn the switch to the position again. The DIC will display AUTO LIGHTS ON. The Automatic Headlamp System is always turned on when the vehicle is started. See Section 3 of your Owner Manual. Interior Lamps Overhead Lamps: The overhead lamp switch, located on the dome lamp, can be set to three positions: Off, On or Door Open. In the Door Open position, the dome lamp (or reading lamps, depending on equipment) will come on when any of the doors are opened. When you enter or exit your car through the driver’s door, the interior lamp(s) will stay on for a short time after the doors have been closed. Instrument Panel Brightness: To adjust the brightness of the instrument panel lamps, turn the dial located above the audio system. Map Lights (if equipped): The map light switches are located under the rearview mirror. Rear Reading Lights (if equipped): The rear reading lights are located on the dome lamp. Press the lamp to turn it on or off. Note: If you leave a door open and the interior lamps are on, the lamps will turn off after 20 minutes to protect the battery. See Section 3 of your Owner Manual. Cruise Control The following cruise control buttons are located on the steering wheel: (On/Off): Press this button to turn the cruise control system on or off. SET – (Set): Press this button to set a speed, or to decrease the set speed if the system is engaged. When the cruise control is engaged, the CRUISE ENGAGED message will temporarily appear on the DIC. RES (Resume): Press this button to resume a set speed, or to increase the set speed if the system is engaged. See Section 3 of your Owner Manual. Retained Accessory Power Retained Accessory Power (RAP) allows certain features, such as the radio and power windows, on your vehicle to continue working for up to 10 minutes after the key is turned to Off or removed from the ignition, and until the driver’s door (or any door, depending on equipment) is opened. See Section 2 of your Ow

J. Brake System Warning Light K. Malfunction Indicator Lamp (Check Engine Light) L. Fog Lamps Light M. Upshift Light N. Airbag Readiness Light O. Safety Belt Reminder Light P. Antilock Brake System Warning Light Q. Tire Pressure Warning Light R. StabiliTrak Light Note: The instrument panel cluster is designed to let you know about many