A Plus Stroke E C B A Plus Stroke - Airmite
CYLINDERS Line, and Micro Cylinders. Our versatile cylinder product line can be used cylinders to meet their requirements. cylinders AIR–MITE PNEUMATIC CYLINDERS 8 All Air-Mite’s cylinders proudly carry the “Made in USA” label. Cylinders have a durable, maintenance-free construction that assures uninterrupted service. We have a state of the art CNC machining facility in our factory in Round Lake, IL, where the components for each cylinder are precisely machined. Then, they are carefully assembled using high quality seals. Finally, each cylinder is cycled and service is available to meet aggressive timelines. Every cylinder manufactured by Air-Mite is completely rebuildable. Repair kits are available for all current and past models of cylinders. TIE ROD CYLINDERS VS Single-Acting, Rear Flange Mount Tie Rod Cylinder sizes from 1½” to 5”. The 4” and 5” bore cylinders are available with double or VS300 DR-2 N T4 W 1 2 34 5 6 B G Thread C B A Plus Stroke PLEASE NOTE: Air cylinders and air presses are required to be used with guards or anti tie-down controls as per OSHA regulations. This applies to all cylinders shown in this catalog E Model Bore Size VS225 VS300 2.25 3.00 2.63 1.50 .50 1.88 3.25 2.63 1.50 .50 2.25 4.00 .28 .34 -18 2.00 -18 2.44 VS400 VS500 4.00 5.00 3.63 2.00 .75 3.00 5.25 3.63 2.00 1.00 3.50 6.25 .41 .41 -18 3.00 -18 3.50 A B C D E F G G Thread Hardcoat anodized aluminum tubing (pre-lubed surface for extended life) Stainless steel tie rods to prevent corrosion Ground and polished steel rod (stainless steel and chrome optional) Plain rod ends standard (custom machining available) Nitrile U-cups and O-rings (FKM optional for high temperature applications) Self-lubricating bronze rod bearing Single-acting cylinder stroke lengths – up to 4” standard Double-acting cylinder stroke lengths – unlimited Double rod ends available on most cylinders C E 20-120 psi operating pressure CNC machined billet aluminum pistons, end caps, and compartments H D A Plus Stroke F FEATURES AND OPTIONS 1 cylinder size model number 2 blank single rod DR double rod 3 stroke length in inches (4” max) 4 blank standard rotatable rod N non-rotating rod 5 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod H H D Strokes above 2” please consult factory for dimension A Please call 224-338-0071 for current prices F
CYLINDERS PS Single-Acting, Foot Mount Tie Rod Cylinder CPS Single-Acting, Clevis Mount Tie Rod Cylinder Pull Type- Normally Extended E Plus Stroke CPS300-2 N 1 23 1 cylinder size model number 2 stroke length in inches (4” max) 3 blank standard rotatable rod N non-rotating rod F E 1 cylinder size model number 2 blank single rod DR double rod 3 stroke length in inches (4” max) 4 blank standard rotatable rod N non-rotating rod 5 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod F H A Plus Stroke B C C D A Plus Stroke B Plus Stroke H H C D D A Plus Stroke B Plus Stroke G Thread F G E E Plus Stroke F H Bore Size PS225 PS300 2.25 3.00 1.88 1.50 .50 1.69 2.50 2.25 2.38 .27 1.88 1.50 .50 2.06 2.50 2.25 2.38 .27 PS400 PS500 4.00 5.00 2.13 2.00 .75 2.75 3.13 3.00 3.38 .39 2.13 2.00 1.00 3.31 3.13 3.00 3.38 .39 A B C D E F G H Model Bore Size -18 3.25 3.13 1.06 -18 4.00 3.13 1.06 CPS225 CPS300 2.25 3.00 1.88 5.00 .50 1.88 5.00 .50 .88 3.25 .52 .94 4.00 .64 -18 .38 ½-20 1.25 -18 .50 ½-20 1.25 -18 5.25 4.13 1.50 -18 6.25 4.13 1.50 CPS400 CPS500 4.00 5.00 2.13 5.00 .75 1.25 5.25 .78 2.13 5.00 1.00 1.25 6.25 1.00 -18 .63 -16 1.25 -18 .75 1-14 1.25 I A Plus Stroke J K B L C D Model A B C D E F G H I J Strokes above 2” please consult factory for dimension A VFS Single-Acting, Front Flange Mount Tie Rod Cylinder CS300-2 N T4 W 1 2345 VFS300 DR-2 N T4 W 1 2 34 5 6 A Plus Stroke B B H D A Plus Stroke G Thread C D A Plus Stroke B H B F E A Plus Stroke G Thread G Thread C E C D 1 cylinder size model number 2 blank single rod DR double rod 3 stroke length in inches (4” max) 4 blank standard rotatable rod N non-rotating rod 5 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod F H G Thread 1 cylinder size model number 2 stroke length in inches (4” max) 3 blank standard rotatable rod N non-rotating rod 4 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod H D F E CS Single-Acting, Clevis Mount Tie Rod Cylinder F Bore Size CS225 CS300 2.25 3.00 2.63 1.50 .50 2.63 1.50 .50 CS400 CS500 4.00 5.00 E Model G H Model Bore Size .52 .64 -18 -18 .38 .50 VFS225 VFS300 2.25 3.00 2.63 1.50 .50 2.00 3.25 2.63 1.50 .50 2.44 4.00 .28 .34 -18 -18 3.63 2.00 .75 1.25 5.25 .78 3.63 2.00 1.00 1.25 6.25 1.00 -18 -18 .63 .75 VFS400 VFS500 4.00 5.00 3.63 2.00 .75 3.00 5.25 3.63 2.00 1.00 3.50 6.25 .41 .41 -18 -18 A B C D E .88 3.25 .94 4.00 F Strokes above 2” please consult factory for dimension A A B C D E F G Strokes above 2” please consult factory for dimension A www.airmite.com C cylinders G PS300 DR-2 N T4 W 1 2 34 5 6 G Thread 9
CYLINDERS H E Plus Stroke DVS300 DR-2 N T4 W 1 2 34 5 6 1 cylinder size model number 2 blank single rod DR double rod 3 stroke length in inches 4 blank standard rotatable rod N non-rotating rod 5 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod F A Plus Stroke B B H D A Plus Stroke cylinders E C G Thread F DPS300 DR-2 N T4 W 1 2 34 5 6 1 cylinder size model number 2 blank single rod DR double rod 3 stroke length in inches 4 blank standard rotatable rod N non-rotating rod 5 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod DVS Double-Acting, Rear Flange Mount Tie Rod Cylinder G DPS Double-Acting, Foot Mount Tie Rod Cylinder 10 C D E B C G A Plus Stroke Bore Size A B C D E F G H I J A Plus Stroke K Model Bore Size B A B C D E F G H 2.13 1.50 .50 1.69 2.75 1.19 2.13 1.50 .50 2.06 2.75 1.19 2.38 2.38 .27 .27 -18 3.25 -18 4.00 3.38 3.38 C DVS225 DVS300 2.25 3.00 2.13 1.50 .50 1.88 3.25 2.13 1.50 .50 2.25 4.00 .28 .34 -18 2.00 -18 2.44 DPS400 DPS450 DPS500 DPS550 DPS580 4.00 4.00 5.00 5.00 5.00 2.63 4.00 2.63 4.02 5.41 3.38 3.38 3.38 3.38 3.38 .39 .39 .39 .39 .39 -18 -18 -18 -18 -18 4.63 6.00 4.63 6.02 7.41 DVS400 DVS450 DVS500 DVS550 DVS580 4.00 4.00 5.00 5.00 5.00 2.63 4.00 2.63 4.02 5.41 .41 .41 .41 .41 .41 -18 -18 -18 -18 -18 .75 .75 1.00 1.00 1.00 2.75 2.75 3.31 3.31 3.31 3.63 5.00 3.63 5.02 6.41 1.50 1.50 1.50 1.50 1.50 5.25 5.25 6.25 6.25 6.25 2.00 2.00 2.00 2.00 2.00 .75 .75 1.00 1.00 1.00 3.00 3.00 3.50 3.50 3.50 5.25 5.25 6.25 6.25 6.25 3.00 3.00 3.50 3.50 3.50 H D 2.25 3.00 D DPS225 DPS300 2.00 2.00 2.00 2.00 2.00 G Thread Model F F DVFS300 DR-2 N T4 W 1 2 34 5 6 DCS300-2 N T4 W 1 2345 1 cylinder size model number 2 blank single rod DR double rod 3 stroke length in inches 4 blank standard rotatable rod N non-rotating rod 5 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod 1 cylinder size model number 2 stroke length in inches 3 blank standard rotatable rod N non-rotating rod 4 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod C E G Thread H G Thread C C 2.13 1.50 .50 2.00 3.25 .28 2.13 1.50 .50 2.44 4.00 .34 DVFS400 DVFS450 DVFS500 DVFS550 DVFS580 4.00 4.00 5.00 5.00 5.00 2.63 4.00 2.63 4.02 5.41 2.00 2.00 2.00 2.00 2.00 C .75 .75 1.00 1.00 1.00 D 3.00 3.00 3.50 3.50 3.50 E 5.25 5.25 6.25 6.25 6.25 F .41 .41 .41 .41 .41 E Modelc Bore Size -18 -18 DCS225 DCS300 2.25 3.00 2.13 1.50 .50 2.13 1.50 .50 .88 3.25 .94 4.00 -18 -18 -18 -18 -18 DCS400 DCS450 DCS500 DCS550 DCS580 4.00 4.00 5.00 5.00 5.00 2.63 4.00 2.63 4.02 5.41 1.25 1.25 1.25 1.25 1.25 G C F 2.25 3.00 B B DVFS225 DVFS300 A A D Please call 224-338-0071 for current prices B 2.00 2.00 2.00 2.00 2.00 C .75 .75 1.00 1.00 1.00 D B G Thread A Plus Stroke Bore Size G Thread Model A Plus Stroke H E D E F D F B B A Plus Stroke A Plus Stroke E DCS Double-Acting, Clevis Mount Tie Rod Cylinder F DVFS Double-Acting, Front Flange Mount Tie Rod D H E Plus Stroke F .52 .64 5.25 .78 5.25 .78 6.25 1.00 6.25 1.00 6.25 1.00 G H -18 -18 .38 .50 -18 -18 -18 -18 -18 .63 .63 .75 .75 .75
CYLINDERS MICRO CYLINDERS FEATURES AND OPTIONS Micro Cylinders are our smallest line of cylinders with bore sizes from ¾” to 1¼”. Single and double acting models provide ample power for many applications such as clamping, locking, ejecting, and throttling. 10-150 psi operating pressure CNC machined cylinder bodies, tubes, and end caps Zinc plated steel piston rod assemblies Plain rod ends standard (custom machining available) Nitrile U-cups and O-rings (FKM optional for high temperature applications) V and DAV model Micro Cylinders are nose mount only P and DAP model Micro Cylinders include steel foot mounting bracket Includes zinc plated steel jam nut for mounting Micro Cylinder, Single-Acting Foot and Nose Mount P 100-1-T2 1 2 34 1 P foot mount V nose mount A B Thread "N" C D L G 100 1” bore 125 1¼” bore 3 stroke length in inches 4 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod H I J K Thread "N" B A B E Foot Mount Nose Mount Stroke P75-½ P75-1 V75-½ V75-1 .50 1.00 2.12 .88 .75 .25 .38 .50 1.25 .88 .00 .20 .68 1.63 2.62 .88 .75 .25 .38 .50 1.25 .88 .00 .20 .68 1.63 P75-2 P75-3 P100 P100AC P100-1 P100-2 P100-3 P110-1 P120-1 P130-1 P125-½ P125-1 V75-2 V75-3 V100 V100AC V100-1 V100-2 V100-3 A V110-1 V120-1 V130-1 V125-½ V125-1 2.00 3.00 .63 .63 1.00 2.00 3.00 1.00 2.00 3.00 .50 1.00 4.12 5.12 2.16 1.88 2.53 4.47 5.47 2.53 4.47 C 5.47 2.04 2.54 A B .88 .88 1.25 1.25 1.25 1.25 1.25 1.31 1.31 1.31 1.50 1.50 C D E F G H I J K .75 .75 .50 .38 .75 1.00 1.00 .75 1.00 1.00 1.00 1.00 .25 .25 .31 .31 .31 .31 .31 .31 .31 .31 .38 .38 .38 .38 .63 .38 .63 .63 .63 .63 .63 .63 .63 .63 .50 .50 .63 .63 .63 .63 .63 .63 .63 .63 .88 .88 1.25 1.25 1.63 1.63 1.63 1.63 1.63 1.63 1.63 1.63 1.63 1.63 .88 .88 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.10 1.13 1.13 .00 .00 .38 .38 .38 .38 .38 .38 .38 .38 .00 .00 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .68 .68 .81 .81 .81 .81 .81 .81 .81 .81 .91 .91 C D E F G H I J K L M 1.63 1.63 2.06 2.06 ¼-18 2.06 2.06 2.06 2.06 2.06 2.06 2.00 2.00 F D D L G C Thread "M" Micro Cylinder, Double-Acting Foot and Nose Mount H I J K A B E C Nose Mount DAP75-½ DAV75-½ DAP75-1 DAV75-1 F 1 P foot mount V nose mount Thread "N" B A C I H J K Thread "N" B A B E Thread "N" DAV75-2 2.00 DAV75-3 3.00 DAV75-4 4.00 DAV100-½ .50 DAV100-1 1.00 DAV100-2 2.00 DAV100-3 3.00 Thread "N" DAV100-4 4.00 DAV100-5 5.00 C DAV100-6 6.00 DAV125-1 1.00 DAV125-2 2.00 DAV125-3 3.00 F D L G C K Thread "M" I H www.airmite.com A B 125 1¼” bore 3 stroke length in inches 4 blank no rod threading T2 external threaded rod T3 reduced external threaded rod T4 internal threaded rod T5 other custom rod D G 100 1” bore DAP75-2 DAP75-3 DAP75-4 DAP100-½ DAP100-1 DAP100-2 DAP100-3 DAP100-4A DAP100-5 DAP100-6 DAP125-1 DAP125-2 DAP125-3 .50 1.00 J Thread "N" A Stroke E C B L D Foot Mount 2.38 .88 .75 .25 .44 .50 1.25 .94 .00 .20 .68 1.63 2.88 .88 .75 .25 .44 .50 1.25 .94 .00 .20 .68 1.63 Thread "M" 3.88 4.88 5.88 2.57 3.14 4.26 5.26 6.26 7.26 8.26 3.53 4.53 5.53 D DAP 100-1-T2 1 2 34 L cylinders 11 .88 .88 .88 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.50 1.50 1.50 .75 .75 .75 .50 1.12 1.12 1.12 1.12 1.12 1.12 1.00 1.00 1.00 .25 .25 .25 .31 .31 .31 .31 .31 .31 .31 .38 .38 .38 .44 .44 .44 .50 .50 .50 .50 .50 .50 .50 .63 .63 .63 .50 .50 .50 .88 .88 .88 .88 .88 .88 .88 .88 .88 .88 1.25 1.25 1.25 1.63 1.63 1.63 1.63 1.63 1.63 1.63 1.63 1.63 1.63 .94 .94 .94 .94 .94 .94 .94 .94 .94 .94 1.13 1.13 1.13 .00 .00 .00 .38 .38 .38 .38 .38 .38 .38 .00 .00 .00 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .20 .68 .68 .68 .77 .77 .77 .77 .77 .77 .77 .91 .91 .91 1.63 1.63 1.63 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 2.00 M
CYLINDERS 12 FEATURES AND OPTIONS ROUND LINE CYLINDERS and machinery. Air-Mite Round Line Cylinders are interchangeable with round line cylinders from other manufacturers. They are available in bore 20-150 psi operating pressure Double-acting cylinders (single-acting available as special) CNC machined billet aluminum pistons and end caps Black anodized end caps Hardcoat anodized aluminum tubing (pre-lubed surface for extended life) Ground and polished steel rod (stainless steel and chrome optional) Round Line Cylinder DRS 20-1 1 2 15 1½” bore 20 2” bore 25 2½” bore 30 3” bore 40 4” bore 2 stroke length in inches Model Bore Size DRS10 DRS15 1.13 1.50 4.37 2.06 1.00 .69 .63 1.00 1.38 .75 .38 .25 ¾-16 5.81 2.63 1.24 .82 .87 1.49 1.75 1.06 .50 .31 1-14 ½-13 DRS20 DRS25 DRS30 DRS40 2.00 2.50 3.00 4.00 5.85 6.94 6.94 10.69 B A 2.63 2.88 2.88 5.88 "A" Plus Stroke "B" Plus Stroke C E D F I J Port Thread "M" G H H Thread "K" Thread "K" Thread "L" Please call 224-338-0071 for current prices C D E 1.24 .86 .87 2.00 1.38 1.00 2.00 1.38 1.00 2.19 1.44 1.13 F 1.49 1.68 1.68 2.25 G 2.25 2.75 3.25 4.25 H I J K L 1.06 .63 .31 1-14 1.37 .75 .44 ¾-10 1.37 .75 .44 ¾-10 1.75 1.00 .50 1¾-12 1-14 M ¼-18 ¼-18 ½-14 cylinders Nitrile U-cups and O-rings (FKM optional for high temperature applications) Tough, low-friction polymer rod bearing Double rod ends available on all cylinders Removal of rear tang optional
CYLINDERS c ylinders 8 VS Single-Acting, Rear Flange Mount Tie Rod Cylinder Please call 224-338-0071 for current prices AIR-MITE PNEUMATIC CYLINDERS Line, and Micro Cylinders. Our versatile cylinder product line can be used cylinders to meet their requirements. All Air-Mite's cylinders proudly carry the "Made in USA" label. Cylinders have a
exercises focusing on strengthening particular parts of the body. Every stroke is unique. Every person’s needs are different. This new guide is a much needed and overdue tool box of practical and easily followed exercise regimes for those recovering from a stroke as well as the families and whānau who support them in theirFile Size: 1MBPage Count: 51Explore further10 Stroke Recovery Exercises For Your Whole Bodywww.rehabmart.comAfter Stroke: 3 Exercises for a Weak Leg. (Strengthening .www.youtube.comStroke Exercises.pdf - Stroke Exercises for Your Body .www.coursehero.com35 Fun Rehab Activities for Stroke Patients - Saebowww.saebo.comPost-Stroke Exercises for Left Arm and Shoulder SportsRecwww.sportsrec.comRecommended to you b
State Advisory Council for Heart Disease and Stroke . o Ms. Aycock gave a thorough presentation on Maryland Stroke Centers and the actions of MIEMMS to work toward the goal, “to address system changes in stroke prevention and coordination of the delivery of care to the acute stroke patient”. Information on the standards of Primary Stroke Centers, Comprehensive Stroke Centers, and base .
NE Ohio Resource List for Stroke Survivors & Persons with Aphasia or Head Injury Compiled by the Members of the Cleveland Stroke Club This list is available online at: www.clevelandstrokeclub.org Updated: 03/24/2019 Caregivers and Stroke Survivors who participate in the Cleveland Stroke Club and other area stroke
Post-stroke fatigue does not always improve with rest and is not necessarily related to recent activity. So it is not like typical tiredness. You might experience post-stroke fatigue after a mild or more severe stroke. Here are some useful definitions of fatigue after stroke. If either of these apply to you, you may have post-stroke fatigue: 1.
hours, days and weeks after a stroke When a stroke happens. 2 Stroke Association n tro n 3 The Stroke Association is registered as a charity in England and Wales (No 211015) and in Scotland . There are two
Stroke Overview A stroke is also called a brain attack. A stroke happens when blood supply is cut off to an area of the brain. When blood supply is cut off, it causes brain cells to lose oxygen and die. The symptoms that you see with a stroke depend on the area of the brain that is damaged. There are two ty
idle strokes in four stroke cycle engine. The power stroke supplies necessary momentum for useful work. TWO STROKE CYCLE ENGINE (PETROL ENGINE) In two stroke cycle engines, the whole sequence of events i.e., suction, compression, power and exhaust are completed in two str
in the future. I can help prevent a stroke by doing what I have learned here. I know that getting help immediately if I have stroke symptoms may lessen the effects of the stroke on my body. As part of my care I have received this education plan. I may also receive: Stroke Patient Education Guide
