BEETLE /iSCAN EASY Family - Diebold Nixdorf
BEETLE /iSCAN EASY Family Self Checkout System Site Preparation, Important Notes and Commissioning (2017)
All product names mentioned in this document are registered trademarks. Copyright Wincor Nixdorf International GmbH, 2017 All rights including the rights to the translation, reprinting, and transmission or copying by any means, in whole or in part, are reserved. Offenders will be liable for damages. All rights including rights resulting from a patent grant or registration of a utility or design are reserved. Refer to protection notice ISO 16016
Contents About this Manual . 1 Further Documentation . 1 Warranty . 2 ESD (Electrostatic Sensitive Devices) . 2 Important Notes . 3 Connecting Peripherals . 4 Customer Requirements . 5 Components . 6 BEETLE /iSCAN EASY with Cash Components . 6 Unpacking and Checking the System . 7 Open the Front Door . 8 Removing the Transportation Locks . 8 Installing the BEETLE /iSCAN EASY in the Store . 9 BEETLE /iSCAN EASY CASH with Socket . 9 Delivery Unit (Floor mounting Kit) . 10 Drill Template . 11 InstallationBEETLE /iSCAN EASY CASH without Socket . 12 Delivery Unit (Floor mounting Kit) . 13 Drill Template . 14 Installing the standard Pole Light . 15 Installing the ADA-II Pole Light . 21 Installing the Security Scale. 23 Ambient conditions . 23 Requirements . 23 Connecting the System. 26 Start up. 26 Power Connection and LAN Support . 26 Disconnecting the System from the Mains . 27 Cleaning Instructions . 28 Approved Cleaning Materials . 28 25BDimensions . 28 BEETLE /iSCAN EASY with Cash Components . 29 Service-Area . 32 Building Block . 33
Hybrid . 35 Compact . 37 Service Area . 40 Block Diagrams . 41 Technical Data . 46 Environmental Conditions . 50 Certificates . 51 CE Marking . 51 FCC-Class A Declaration . 51 30BRecycling the BEETLE /iSCAN EASY . 51
Introduction About this Manual This manual refers to technically trained personnel only. It provides all necessary site preparation information for installing the BEETLE /iSCAN EASY at site. Notes are marked by this symbol. Caution! Identifies action requiring caution. The responsibility for all technical and special prerequisites for the installation of the BEETLE /iSCAN EASY is borne by the customer. A detailed list of customer responsibilities is given in this manual. Installation as well as connection of BEETLE /iSCAN EASY may only be executed by technically trained personnel. The safety instructions given in this document should be strictly followed when handling the BEETLE /iSCAN EASY. Further safety, installation, and maintenance instructions can be found in the manuals supplied with the components. In case of doubts or questions please contact Wincor Nixdorf International (WN). Further Documentation Find the „User Manual“ (Hardware) on the Wincor Nixdorf Internet. BEETLE /iSCAN EASY Family 1
Warranty Warranty Wincor Nixdorf generally guarantees a warranty engagement for 12 months beginning with the date of delivery. This warranty engagement covers all damages which occur despite a normal use of the product. Damages because of improper or insufficient maintenance, improper use of the product or unauthorized modifications of the product, inadequate location or surroundings will not be covered by the warranty. For further information on the stipulation consult your contract. All parts of the product which are subject to wear and tear are not included in the warranty engagement. For detailed warranty arrangements please consult your contract documents. ESD (Electrostatic Sensitive Devices) Electrostatic sensitive devices (ESD) may be marked with this sticker. When you handle components fitted with ESDs, you must observe the following points under all circumstances: 2 Unplug the power before inserting or removing components containing ESDs. While working with ESDs you must discharge yourself by using an ESD wrist strap or grounding cable to connect yourself at all times to the earth connector of power socket or a grounded object. Place all components containing ESDs on a static-safe base. The equipment and tools you use must be free of static charges. Always hold boards with ESDs by their edges. Do not touch the components. Never touch pins or conductors on boards fitted with ESDs. BEETLE /iSCAN EASY Family
Important Notes Important Notes Appliances supplied by Wincor Nixdorf International GmbH comply with the respective safety regulations for data-processing installations and information technology installations, including electrical office equipment for use within an office environment. Whenever work of any kind is done on the device, as well as when data cables are plugged and unplugged, the device must be completely disconnected from the line voltage. After maintenance and repair work on the cash module the module must be completely pushed into the BEETLE /iSCAN EASY and the front door must be closed before switching on the device. Appliances may only be repaired by authorized technicians. Unauthorized opening of the housing or inexpert repairs can result not only in considerable personal danger, but will also invalidate your warranty and liability protection. Always consult the available documentation before doing any work with this appliance. If this device is brought from a cold environment into a heated place of business, condensation may occur. Before operation, the device must be completely dry. Therefore, an acclimatization period of at least two hours must be adhered to. The sockets of the house installation must be easily accessible. Always lay the supply leads and cables in such a way that they cannot be stepped on or tripped over. Only touch green marked handles and knobs for moving parts. Exchange damaged cables immediately. In order to completely disconnect the device from the power source, turn the device off and use the separator in the fuse box or building installation. Make sure that no objects (such as paper clips) can reach the interior of the device, since electrical shocks or short-circuits could result. To avoid overheating of the system ensure that the BEETLE /iSCAN EASY receives adequate ventilation. During an electrical storm, data cables should not be plugged in or unplugged. Keep the device away from vibrations, airstreams/ventilations, dust, humidity and heat. Ensure that used parts are disposed of in an environmentally friendly manner. In case of an accident (such as a damaged housing, entry of liquids or foreign objects), switch the device off and use the separator to completely remove the device from power. The appliance and other information technology hardware should only be connected to electrical supply networks with a separate protective earth wire (PE). This type of electrical supply network is referred to as a TN-S network. Do not use PEN conductors. Also follow the recommendations set forth in DIN VDE 0100 Part 540, Appendix C2 as well as EN50174-2, §5.4.3, National Electrical Code ANSI/NFPA 70-2005 and Canadian Electrical Code, Part I, CSA C22.1-02. This will help prevent malfunctions. Turn off the device when working on the cutter of the printer. BEETLE /iSCAN EASY Family 3
Important Notes Always keep the ventilation slots free of obstruction to ensure adequate air circulation and avoid overheating. Transport the appliance only in its original packaging (to protect it against knocks and bumps). If a lithium battery is supplied with the appliance, ensure that the battery is replaced with an equivalent type. Otherwise there is danger of explosion! Lithium batteries may only be replaced with identical types or other types recommended by the manufacturer. Batteries must be disposed of according to local regulations on the disposal of special waste. Connecting Peripherals Use only shielded cables when connecting devices to the system to ensure compliance with international Rules and Regulations for radiated emission as well as to achieve a high immunity against external disturbances. 4 BEETLE /iSCAN EASY Family
Customer Requierements Customer Requirements Before the BEETLE /iSCAN EASY installation can be started, the customer is held responsible to provide the following: A surface made of non-flammable material (e.g. concrete or metal) must be located underneath BEETLE /iSCAN EASY. Ensure that the installation site has the required load-carrying capacity. Appropriate drawings concerning location of the equipment as well as site wiring (power and communications, paths and lengths). Location of other equipment that may generate electrical noise, electromagnetic interference, or heat. Provision and installation of all communication cables wall jacks, special connectors and associated hardware. Provision and installation of necessary power distribution boxes, conduits, grounds, lightning protection devices, and associated hardware. Ensure that all applicable codes, regulations, and laws (including, but not limited to, electrical, building, safety, and health) are adhered to. Provision and installation of auxiliary power or other equipment as required. Provision of storage or service as required. Provision of a level floor to locate the BEETLE /iSCAN EASY. The system has to be stable and must not tilt. The maximum incline must not exceed 2%. The feet of the unit can overcome a height difference of up to 10mm. Provision and installation of floor coverings and environmental systems that limit or control static electricity build-up and discharge. Provision of appropriate equipment for the remote support. The customer is responsible for relocating the Self-Checkout equipment (check stand and components) to the final placement/installation position. Keep the Wincor Nixdorf equipment area free from dust, smoke, lint, and other particles. Restrict smoking, eating, and drinking around the equipment. Avoid locating the equipment near other machines that generate ink, carbon and paper dust particles. Please note that Wincor Nixdorf will not take over any warranty/liability in case the technical and environmental requirements are not met. BEETLE /iSCAN EASY Family 5
Components Components BEETLE /iSCAN EASY with Cash Components 6 BEETLE /iSCAN EASY Family
Unpacking the System Unpacking and Checking the System Remove the card board and the wrapping paper. Take care for the extra pole light. Verify that the scope of delivery is identical to the information on the delivery ticket. Should you notice any transport damages or discrepancies between package contents and delivery ticket or functional defects, please inform your contracting parties or the branch office of Wincor Nixdorf immediately. Please indicate the number of your delivery ticket and delivery ticket position and serial number of the respective device. We recommend to save the original packaging for later transports (protection from impact and shock). BEETLE /iSCAN EASY Family 7
Removing the Transportation Locks Open the Front Door Unlock and open the front door of the BEETLE /iSCAN EASY. Removing the Transportation Locks Unlock and open the front door of the BEETLE /iSCAN EASY. Remove the red transportation locks at the cash modules with a Tx 20 screw driver. We recommend to keep the transportation locks for later transports. 8 BEETLE /iSCAN EASY Family
Installing the Pole Light Installing the BEETLE /iSCAN EASY in the Store The BEETLE /iSCAN EASY will be delivered on a pallet (size 800 mm x 1200 mm acc. to industry standard). Caution! Always wear safety gloves and safety shoes with steel toe caps while transporting heavy appliances. USA: Safety shoes with class 1 toe cap according ASTM F 2412 and ANSI Z41.1 in its current versions. Canada: Protection CSA code 1Pxxx. BEETLE /iSCAN EASY CASH with Socket Unlock and open the front door of the BEETLE /iSCAN EASY (see page 8). Grasp the coin and the cash module each at the green lever and pull them out completely. BEETLE /iSCAN EASY Family 9
Installing the Pole Light Remove the two screws near the front (see arrows). Insert the cash modules and close the front door. Remove the BEETLE /iSCAN EASY backwards from the mounting bracket. Remove the mounting bracket from the pallet. You need this part for the floor mounting. Caution! Tilt the device (max. 15 ) very carefully at the edge of the pallet and set it up at the designated site. The following drill template has to be used to fix the BEETLE /iSCAN EASY on the floor. Delivery Unit (Floor mounting Kit) 01750252991 Screw kit for floor mounting 01750009782 ROTOR 01750097998 Hexagon head screw DIN 933 M10x60-8.8 3587100020 Washer 10,5x2,0mm 4330700428 Minigrip Poly-bag 100 x 150mm 10 BEETLE /iSCAN EASY Family
Installing the Pole Light Drill Template Mounting Bracket 537,7 292 470 Front Side All dimensions in mm BEETLE /iSCAN EASY Family 11
Installing the Pole Light InstallationBEETLE /iSCAN EASY CASH without Socket Unlock and open the front door (see page 8). Grasp the coin and the cash module each at the green lever and pull them out completely. Remove the two screws near the front side (see arrows). Insert the cash modules and close the front door. Remove two screws (see arrows) and remove the back cover upwards. 12 BEETLE /iSCAN EASY Family
Installing the Pole Light Remove two screws at the back side (see arrows). Caution! Tilt the device (max. 15 ) very carefully at the edge of the pallet and set it up at the designated site. Delivery Unit (Floor mounting Kit) 01750252991 Screw kit for floor mounting 01750009782 ROTOR 01750097998 Hexagon head screw DIN 933 M10x60-8.8 3587100020 Washer 10,5x2,0mm 4330700428 Minigrip Poly-Bag 100 x 150mm BEETLE /iSCAN EASY Family 13
Installing the Pole Light Drill Template Use the following drill template to fix the BEETLE /iSCAN EASY on the floor. 510 539,2 Front Side All dimensions in mm At first set the back cover in the snap hooks at the BEETLE /iSCAN EASY housing (see arrows). Set the back cover into place and fix it with the screws removed before. 14 BEETLE /iSCAN EASY Family
Installing the Pole Light Installing the standard Pole Light Unwrap the pole light and deposit it in a save place. Tilt the display upwards to the position as shown in the picture below. (Optional: Remove the loudspeaker holder). Remove the two screws fixing it at the holder. Remove the display upwards and place it beside the printer. BEETLE /iSCAN EASY Family 15
Installing the Pole Light Remove four screws (see arrows) from the holder. Pull (see arrow) the back side off the front side of the pole light. 16 BEETLE /iSCAN EASY Family
Installing the Pole Light Mount the front cover to the holder and secure it with the four screws removed before. Plug the cable and set the back cover back into place (just clip it in). BEETLE /iSCAN EASY Family 17
Installing the Pole Light You can mount the display in a lower position only if the scanner 9800i is installed. Original Position Lower Position If you choose the lower position, remove the plate below (remove two screws – see arrows) and mount it in the upper position. Upper Position Set the display into place and fix it with the two screws removed before. 18 BEETLE /iSCAN EASY Family
Installing the Pole Light Lay the cables inside the pole light in the position as shown in the foolowing pictures and fix them with the tin plates (see black arrows). BEETLE /iSCAN EASY Family 19
Installing the Pole Light Place the rear profile with the right side (as viewed from the back of the ACO) into the groove of the fixed profile. Using both hands, squeeze the two profile pieces together until they click into place. 20 BEETLE /iSCAN EASY Family
Installing the Pole Light Installing the ADA-II Pole Light Set the front side of the pole light (side with the drillings) into place and fix it with a screw Tx20 at both sides from the display. Fix the pole light additional with the two holders. Set the holder into place as shown in the picture below. BEETLE /iSCAN EASY Family 21
Installing the Pole Light Fix the holders at first with a screw at the housing of the self checkout (1). Fix the holders also at the pole light (2). 2 1 2 1 Plug the cable (fits just in one position) and set the back cover into place (just clip it in). 22 BEETLE /iSCAN EASY Family
Installing the Security Scale Installing the Security Scale Ambient conditions The weighing plate and the scale’s mechanisms should have no mechanical contact to other objects (should not touch other objects such as coats, bags, advertising banners, etc.). Avoid locations where strong vibrations can occur that could prevent of a stable weight (such as subways, bus stations, etc.). In such cases, tests with various parameters can be carried out on-site. Special parameter programs are available for this purpose (please contact Diebold Nixdorf Service). Wind and air currents can also cause false values (the scale may not be located within the direct influence of an air conditioning system or in a drafty location). This is easy to test using a lighter. If these conditions cannot be avoided, parameters can be adjusted here as well. No advertising banners or other foreign objects may be attached to the scale. In individual cases, the plexiglass frame around the scale can function as a sail and lead to strong deviations. Recommendation: Before installation, check conditions on-site and reduce these influences through the corresponding measures. Requirements The floor must be level and sufficiently weight-bearing. The scale/self-checkout should not wobble or tilt. The scale does not need to be absolutely level; it can have an incline of up to a maximum of 3 . The adjustment screws on the feet are limited in the distance they can travel (max. 5 mm hub) and are only suitable to a certain degree for orienting the scale. BEETLE /iSCAN EASY Family 23
Installing the Security Scale The screws to fix the security scale are already installed in the right position in the BEETLE /iSCAN EASY. Remove the security unit upwards from the security scale module. Remove 4 screws (one at each side inside the security scale) which fix it at the palett. Remove the security scale from the palett and positione it close to the BEETLE /iSCAN EASY. Caution! Always wear safety gloves and safety shoes with steel toe caps while transporting heavy appliances. USA: Safety shoes with class 1 toe cap according ASTM F 2412 and ANSI Z41.1 in its current versions. Canada: Protection CSA code 1Pxxx. 24 BEETLE /iSCAN EASY Family
Installing the Security Scale Plug the cable from the BEETLE /iSCAN EASY and the security scale, secure it and put it into the security scale housing. Loosen the screws for the security scale at the side cover of the BEETLE /iSCAN EASY. Mount the security scale and push the device backwards. Fix the screws. BEETLE /iSCAN EASY Family 25
Connecting the System Connecting the System Start up The power supply system must be equipped with separately guided protective earth conductor (PE). This kind of electricity system is known as TN-S network. Do not use PEN conductors! Ratings of BEETLE /iSCAN EASY: 100-120V / 200 V-240 V 2.0A / 1.0A 50-60Hz Caution! Check that the rating of the appliance corresponds to the local mains voltage. Power Connection and LAN Support The BEETLE /iSCAN EASY supports the Ethernet 10/100 BASE-T local area network (LAN) communication protocol. The BEETLE /iSCAN EASY terminal provides a female RJ-45 connection port for the LAN. A 6-foot LAN cable is provided with the system. Plug in the power and the LAN cable. 26 BEETLE /iSCAN EASY Family
Connecting the System Install the cover with two screws at the back of the device. Unlock and open the front door of the BEETLE /iSCAN EASY (see page 8). Check if all power plugs are well installed in the power distributor. Start the system by switching the switch to position »1« (see arrow). Disconnecting the System from the Mains Shut down the system by the software application. Pull out the cash module at the left side. Disconnect the system by pressing the button in position 0 (see picture above). Unplug the power supply. BEETLE /iSCAN EASY Family 27
Appendix Cleaning Instructions Always turn off the system before cleaning. The glass surface of your Touch Screen and the scanner window should be cleaned with a mild, abrasive-free, commercially available glass cleaning product. All pH neutral materials (pH 6 to 8) are good for cleaning. Cleaners with pH values 9 to 10 are not recommended. Cleaning with water and isopropyl alcohol is possible as well. Do not use solvents containing acetic acid. Use a soft, fine-meshed cloth to clean the surface. Dampen the cloth slightly and then clean the screen and the scanner window. Clean the housing of the BEETLE /iSCAN EASY with a vacuum cleaner or soft cloth. Wrong maintenance may cause damages to the screen, which are not covered by warranty. Approved Cleaning Materials The items listed below can be ordered from Wincor Nixdorf branch office or your Wincor Nixdorf sales partner. Product Name Order Number Explanations Wincor Cleaning wipes 01750097332 For all plastic and metal surfaces, not for TFT screens, dispenser box with 100 wet cloths Wincor TFT,Screen Clean wipes 01750097334 For TFT/LCD Screens, does not contain alcohol, non-flammable, 50 cloths wet and 50 cloths dry Wincor Air Duster 400g 01750108425 Non-flammable Cleaning cloth with Isopropyl 01750104065 100 cloths with isopropyl WN Cleaning Card for Hybrid Card reader 01750016388 Wet cleaning card for all chip- and hybrid card readers Please note the manufacturer’s specifications on the packaging and on the information sheet included in the packaging. The product may be damaged or soiled if materials are used that are not approved or if they are used improperly. 25B 28 BEETLE /iSCAN EASY Family
Appendix Dimensions BEETLE /iSCAN EASY with Cash Components BEETLE /iSCAN EASY Family 29
Appendix 30 BEETLE /iSCAN EASY Family
Appendix BEETLE /iSCAN EASY Family 31
Appendix Service-Area 32 BEETLE /iSCAN EASY Family
Appendix Building Block BEETLE /iSCAN EASY Family 33
Appendix 34 BEETLE /iSCAN EASY Family
Appendix Hybrid BEETLE /iSCAN EASY Family 35
Appendix 36 BEETLE /iSCAN EASY Family
Appendix Compact BEETLE /iSCAN EASY Family 37
Appendix 38 BEETLE /iSCAN EASY Family
Appendix 4 Bags BEETLE /iSCAN EASY Family 39
Appendix Service Area 40 BEETLE /iSCAN EASY Family
Appendix Block Diagrams BEETLE iSCAN EASY with C1010 iC20 and BEETLE M III K2. BEETLE /iSCAN EASY Family 41
Appendix BEETLE /iSCAN EASY with Coin Module iCASH 15E and Cash Module iCASH 20 42 BEETLE /iSCAN EASY Family
Appendix BEETLE /iSCAN EASY with Coin Module iCASH 15E and Cash Module iCASH 10 BEETLE /iSCAN EASY Family 43
Appendix BEETLE /iSCAN EASY NON CASH BEETLE /M-III 44 BEETLE /iSCAN EASY Family
Appendix BEETLE /iSCAN EASY NON CASH BEETLE /M-II BEETLE /iSCAN EASY Family 45
Appendix Technical Data General Dimensions (H x W x 0} in mm 1,793 x 750 x 760 (with status light) Weight Approx. 150 kg (depending on configuration) Currencies Euro, US Dollar, GB Pound Further currencies on request Payment Functionalities iCASH 10 - Note Recycling Recyclnig of up to 3 denominations 3 stationary drums 1 compact cassette Maximum capacity per drum module: approx. 220 notes Maximum filling height cassette: 78 mm (standard cassette) Input of bondies of up to 30 notes Output of bundles of up to 30 notes Peking rate of up to 4 notes per second for deposits/withdrawals Maximum/Minimum note size in mm: 170 X SS/120 X 60 Note validation in compliance with ECB framework 46 BEETLE /iSCAN EASY Family
Appendix iCASH 15e - Coin Recycling Recycling of up to 8 denominations Euro capacity - 220 x 2 euro - 250 x 1euro - 220 x SO cent - 290 x 20 cent - 360x 10 cent - 360x 5 cent - S40 x2 cent - S40 x 1cent 1 Overflow box with a capacity of up to 150 coins Bulk deposit of up to approx. 50 coins Refill cassette (optional) Dispensing of up to approx. 50 coins Processing rate: - Deposits:approx.3 coins per sec. - Dispensing: approx.6 coins per sec. Cash authentication module Foreign object detection Cashless Payments Adaptation of various EFT terminals Signatore pad/fingerprint scanner (optional) NFC terminals (optional) Alternative Payments Coupons/vouchers (optional) Deposit receipts (optional) Magnetic swipe card reader (optional) BEETLE /iSCAN EASY Family 47
Appendix Scanning/Printing Functionalities Integration of various scanners Integrated fruit scale (optional} Handheld scanner (optional} Printer (receipt,MF,coupon) Customer interaction 15" LCD touch; wide screen and 2nd customer display (optional) Speaker integrated Proximity sensor (optional) Illumination for input and output slots System unit System BEETLE /M-III Software Windows, Linux, WNLPOS, POS Ready Standard interface to POS applications Graphical user interface Chassis Customer-specific color scheme (optional) Compliant with ADA II Security Security scale Maximum Ioad: - 1bag scale:30kg@ 2 grams resolution - 2bag scale:60kg @ 2 grams resolution - DIY scale:180kg @ S grams resolution Flexible bag holder concept Specific DIY sca
: Safety shoes with class 1 toe cap according ASTM F 2412 and ANSI Z41.1 in its current versions . Canada: Protection CSA code 1Pxxx. BEETLE /iSCAN EASY CASH with Socket Unlock and open the front door of the BEETLE /iSCAN EASY (see page 8). Grasp the oin and the cash modulec each at the green lever and pull them out completely.
European Chafer, Asiatic Garden Beetle, Oriental Beetle, Black Turfgrass Ataenius) There are 8 different white grubs that are commonly known to cause turfgrass plant damage. They include the Japanese beetle, May and June beetle, masked chafer, green June beetle, European chafer, Asiatic garden beetle, oriental beetle, and black turfgrass ataenius.
VW Beetle 1968-1979 J10471 1499.99 1600cc Twinport Engine (Short) VW Beetle 1971-1976 J10469 1499.99 1641cc Twinport Engine (Short) VW Beetle 1971-1976 J16982 1599.99 Examples from our range of 100’s of engine parts for your Beetle E Barrel and Piston Set (85.5mm) VW Beetle 1600cc 19
2009 New Beetle New Beetle Convertible. What will we do first, next? *The Volkswagen Carefree Maintenance Program covers the New Beetle's 10k, 20k and 30k scheduled maintenance intervals, during the term of the new vehicle limited warranty, at no additional charge. See dealer or vehicle maintenance program booklet for details. **2007 Bloomberg .
10.3.5 Connecting ADC and DAC IPs into a Cortex-M system 242 10.4 243Bring an SoC to life – Beetle test chip case study 10.4.1 Beetle test chip overview 243 10.4.2 Beetle test chip challenges 245 10.4.3 Beetle test chip system design 246 10.4.4 Implementation of the Beetle test chip 24
Diebold Nixdorf's cash-recycling modules also automatically check deposited cash for signs of counterfeiting, further alleviating risk, and these units comply with all current Central Bank . 5 "Cash Recycler China Analysis." Diebold. 2009. 6 "The Costly to and Fro of Cash." BAI. 2006. 4 Cash Recycling Signifies Untapped
Figure 12: Adult twice-stabbed lady beetle with several pre-pupae and pupae on a crape myrtle trunk. It is not unusual to see many lady beetle pupae on the trunk of an infested tree. Before pupating, these beetles cleaned most of the scales from this tree. Lady beetle pupae are the pre-adult stage of the lady beetle and are highly beneficial.
Beetle News Vol. 1:4 December2009 2 ISSN 2040-6177 Some Beetle Species New to Warwickshire in 2009 Not altogether unexpected was the first recorded occurrence of Panagaeus bipustulatus (Fabricius) in Vice-county 38. The exact details of the location have yet to be received by the author, but the record concerns a
While opening an AutoCAD 2000 drawing, you can use the Partial Open option to work with only part of the drawing file. If you are working with a large drawing, you can partially open the drawing and select a specific view and layers to work with instead of loading the entire drawing. See “Using Par- tial Open and Partial Load” on page 311. To open a drawing 1 In the Startup dialog box .
