Teccor Brand Histr Ors - Origin-savvis.littelfuse

2y ago
19 Views
3 Downloads
691.70 KB
9 Pages
Last View : 12d ago
Last Download : 3m ago
Upload by : Lee Brooke
Transcription

Teccor brand Thyristors1 Amp Standard SCRsSx01E & SxN1 SeriesRoHSDescriptionExcellent for lower current heat, lamp, and audible alarmcontrols for home goods.Standard phase control SCRs are triggered with fewmilliamperes of current at less than 1.5V potential.Features & Benefits RoHS compliant Voltage capability upto 600 V Glass – passivatedjunctions Surge capability up to30 AApplicationsMain FeaturesSymbolIT(RMS)VDRM /VRRMIGTValueUnit1A400 to 600V10mATypical applications are AC solid-state switches,fluidlevel sensors, strobes, and capacitive-dischargeignition systems.Additional InformationSchematic SymbolDatasheetASamplesResourcesKGAbsolute Maximum Ratings — Standard SCRsParameterTest ConditionsValueUnitIT(RMS)SymbolRMS on-state currentTC 90 C1AIT(AV)Average on-state currentTC 90 C0.64Asingle half cycle; f 50Hz;TJ (initial) 25 C25single half cycle; f 60Hz;TJ (initial) 25 C303.7A2sA/μsITSMPeak non-repetitive surge currentI 2tI2t Value for fusingtp 8.3 msCritical rate of rise of on-state currentf 60Hz ; TJ 125 C50Peak gate currentTJ 125 C1.5AAverage gate power dissipationTJ 125 C0.3WStorage temperature range-40 to 150 COperating junction temperature range-40 to 125 Cdi/dtIGMPG(AV)TstgTJA 2016 Littelfuse, Inc.Specifications are subject to change without notice.Revised: 05/02/16

Teccor brand Thyristors1 Amp Standard SCRsElectrical Characteristics (TJ 25 C, unless otherwise specified)SymbolTest ConditionsIGTVD 12V; RL 60 ΩVGTVD 12V; RL 60 Ωdv/dtValueVD VDRM; gate open; TJ 100 CMAX.10MIN.1MAX.1.520MIN.VD VDRM; gate open; TJ 125 C40UnitmAVV/μsVGDVD VDRM; RL 3.3 kΩ; TJ 125 CMIN.0.2VIHIT 200mA (initial)MAX.30mAtq(1)MAX.35μstgtIG 2 x IGT; PW 15µs; IT 2ATYP.2μs(1) IT 1A; tp 50µs; dv/dt 20V/µs; di/dt -10A/µsStatic CharacteristicsSymbolVTMTest ConditionsIT 2A; tp 380 µsValueUnit1.6VMAX.TJ 25 CIDRM / IRRMVDRM VRRM10TJ 100 C200MAX.TJ 125 CμA500Thermal ResistancesSymbolParameterRθ(J-C)Junction to case (AC)Rθ(J-A)Junction to ambientNotes : x voltage* Mounted on 1 cm2 copper (two-ounce) foil surface 2016 Littelfuse, Inc.Specifications are subject to change without notice.Revised: 05/02/16ValueSx01E50SxN135*Sx01E145Unit C/W C/W

Teccor brand Thyristors1 Amp Standard SCRsFigure 1: Normalized DC Gate Trigger Currentvs. Junction TemperatureFigure 2: N ormalized DC Gate Trigger Voltagevs. Junction Temperature2.0Ratio of VGT / VGT (TJ 25 C)Ratio of IGT / IGT (TJ 25 40-1510Figure 3: Normalized DC Holding Currentvs. Junction TemperatureInstantaneous On-state Current (iT) – AmpsRatio of IH/IH (TJ 25 C)6085110125Figure 4: O n-State Current vs. On-StateVoltage (Typical)2.01.51.00.525TJ 25 C201510500.0-40-15103560851100.71250.8Figure 5: Power Dissipation (Typical)vs. RMS On-State CurrentMaximum Allowable Case Temperature (TC) - .01.11.21.31.41.51.6Figure 6: Maximum Allowable Case Temperaturevs. RMS On-State Current1.00.00.9Instantaneous On-state Voltage (vT) – VoltsJunction Temperature (TJ) -- ( C)Average On-State Power Dissipation [PD(AV)] - (Watts)35Junction Temperature (TJ) -- ( C)Junction Temperature (TJ) -- ( C)0.7RMS On-State Current [IT(RMS)] - Amps0.80.91.01301251201151101051009590CURRENT WAVEFORM: SinusoidalLOAD: Resistive or InductiveCONDUCTION ANGLE: 180 85800.00.10.20.30.40.50.60.70.80.91.01.1RMS On-State Current [IT(RMS)] - Amps 2016 Littelfuse, Inc.Specifications are subject to change without notice.Revised: 05/02/16

Teccor brand Thyristors1 Amp Standard SCRsFigure 8: Maximum Allowable Ambient Temperaturevs. RMS On-State Current130Maximum Allowable Ambient Temperature (TA) - CMaximum Allowable Case Temperature (TC) - CFigure 7: Maximum Allowable Case Temperaturevs. Average On-State Current1251201151101051009590CURRENT WAVEFORM: SinusoidalLOAD: Resistive or InductiveCONDUCTION ANGLE: 180 85800.00.10.20.30.40.50.60.7120CURRENT WAVEFORM: SinusoidalLOAD: Resistive or InductiveCONDUCTION ANGLE: 180 FREE AIR RATING1008060402000.80.00.10.2Figure 9: Maximum Allowable Ambient Temperaturevs. Average On-State Current0.40.50.60.70.80.91.0Figure 10: Peak Capacitor Discharge Current100CURRENT WAVEFORM: SinusoidalLOAD: Resistive or InductiveCONDUCTION ANGLE: 180 FREE AIR RATING10080604020Peak Discharge Current (ITM) - AmpsMaximum Allowable Ambient Temperature(TA) - C12010ITRMtW00.00.10.20.30.40.50.60.7Figure 11: Peak Capacitor Discharge Current Derating1.21.00.80.60.40.20.00255075100Case Temperature (TC) - C 2016 Littelfuse, Inc.Specifications are subject to change without notice.Revised: 05/02/1612510.51.010.0Pulse Current Duration (tW) - msAverage On-State Current [IT(AVE)] - AmpsNormalized Peak Current0.3RMS On-State Current [IT(RMS)] - AmpsAverage On-State Current [IT(AVE)] - Amps15050.0

Teccor brand Thyristors1 Amp Standard SCRsFigure 12: Surge Peak On-State Current vs. Number of CyclesPeak Surge (Non-repetitive)On-state Current (ITSM) – Amps100.0SUPPLY FREQUENCY: 60 Hz SinusoidalLOAD: ResistiveRMS On-State Current: [IT(RMS)]: Maximum RatedValue at Specified Case TemperatureNotes:1. G ate control may be lost during and immediatelyfollowing surge current interval.2. O verload may not be repeated until junctiontemperature has returned to steady-staterated value.10.01.00.11101001000Surge Current Duration -- Full CyclesSoldering ParametersPre HeatPb – Free assembly- Temperature Min (Ts(min))150 C- Temperature Max (Ts(max))200 C- Time (min to max) (ts)60 – 180 secsAverage ramp up rate (Liquidus Temp)(TL) to peak5 C/second maxTS(max) to TL - Ramp-up Rate5 C/second maxReflow- Temperature (TL) (Liquidus)217 C- Temperature (tL)60 – 150 seconds260Time within 5 C of actual peakTemperature (tp)20 – 40 secondsRamp-upTLtLTS(max)PreheatTS(min)25Peak Temperature (TP) 0/-5tPTPTemperatureReflow ConditionRamp-doRamp-downtStime to peak temperatureTime CRamp-down Rate5 C/second maxTime 25 C to peak Temperature (TP)8 minutes Max.Do not exceed280 C 2016 Littelfuse, Inc.Specifications are subject to change without notice.Revised: 05/02/16

Teccor brand Thyristors1 Amp Standard SCRsPhysical SpecificationsEnvironmental SpecificationsTestTerminal Finish100% Matte Tin-platedBody MaterialUL recognized epoxy meeting flammabilityclassification 94V-0Lead MaterialCopper AlloySpecifications and ConditionsAC BlockingTemperature CyclingTemperature/HumidityMIL-STD-750, M-1040, Cond A AppliedPeak AC voltage @ 125 C for 1008 hoursMIL-STD-750, M-1051,100 cycles; -40 C to 150 C; 15-mindwell-timeEIA / JEDEC, JESD22-A1011008 hours; 320V - DC: 85 C; 85%rel humidityMIL-STD-750, M-1031,1008 hours; 150 CDesign ConsiderationsHigh Temp StorageCareful selection of the correct device for the application’soperating parameters and environment will go a long waytoward extending the operating life of the Thyristor. Gooddesign practice should limit the maximum continuouscurrent through the main terminals to 75% of the devicerating. Other ways to ensure long life for a power discretesemiconductor are proper heat sinking and selection ofvoltage ratings for worst case conditions. Overheating,overvoltage (including dv/dt), and surge currents arethe main killers of semiconductors. Correct mounting,soldering, and forming of the leads also help protectagainst component damage.Low-Temp Storage1008 hours; -40 CResistance toSolder HeatMIL-STD-750 Method 2031SolderabilityANSI/J-STD-002, category 3, Test ALead BendMIL-STD-750, M-2036 Cond EDimensions – TO-92 (E Package)TC Measuring .41HMFDKJ 2016 Littelfuse, Inc.Specifications are subject to change without notice.Revised: All leads insulated from case. Case is electrically nonconductive.ELDimension

Teccor brand Thyristors1 Amp Standard SCRsDimensions - Compak (C Package)TC / TL TemperatureMeasurement Dimensions are in inches(and millimeters).Pad OutlineProduct SelectorPart NumberVoltage400V600V800V1000VGate SensitivityTypePackageSx01EXX10mAStandard SCRTO-92SxN1XX10mAStandard SCRCompakNote: x VoltagePacking OptionsMarkingWeightPacking ModeBase QuantitySx01EPart NumberSx01E0.19 gBulk2000Sx01ERPSx01E0.19 gReel Pack2000Sx01EAPSx01E0.19 gAmmo Pack2000SxN1RPSxN10.08 gEmbossed Carrier2500Note: x Voltage 2016 Littelfuse, Inc.Specifications are subject to change without notice.Revised: 05/02/16

Teccor brand Thyristors1 Amp Standard SCRsTO-92 (3-lead) Reel Pack (RP) Radial Leaded SpecificationsMeets all EIA-468-C Standards1.6(41.0)0.236(6.0)0.708(18.0)0.02 (0.5)0.098 (2.5) MAX1.26(32.0)0.354(9.0)0.5(12.7)0.1 (2.54)Cathode0.2 (5.08)AnodeGate0.157 DIA(4.0)14.17(360.0)Flat up1.97(50.0)Dimensionsare in inches(and millimeters).Direction of FeedTO-92 (3-lead) Ammo Pack (AP) Radial Leaded SpecificationsMeets all EIA-468-C Standards0.236(6.0)1.62(41.2)0.708(18.0)0.02 (0.5)0.098 (2.5) MAX1.27(32.2)0.354(9.0)0.1 (2.54)0.5(12.7)Anode0.2 (5.08)0.157(4.0) DIACathodeGateFlat downf FeednoDirectio25 Devices per fold1.85(47.0)12.2(310.0)1.85(47.0)13.3(338.0) 2016 Littelfuse, Inc.Specifications are subject to change without notice.Revised: 05/02/16Dimensionsare in inches(and millimeters).

Teccor brand Thyristors1 Amp Standard SCRsCompak Embossed Carrier Reel Pack (RP) SpecificationsMeets all EIA-481-1 5(8.0)CathodeGate0.059 DIA(1.5)12.99(330.0)0.512 (13.0) ArborHole Dia.Cover tapeDimensionsare in inches(and millimeters).0.49(12.4)Direction of FeedPart Numbering SystemS 6 01 EDEVICE TYPES: SCRPart Marking System75TO-92 (E Package)S601ELead Form Dimensionsxx: Lead Form Option VOLTAGE RATING4: 400V6: 600VCURRENT RATING01: 1A (TO-92)N: 1A (Compak)SENSITIVITY & TYPE[blank]: 10 mA (TO-92)1: 10 mA (Compak)PACKAGE TYPEE: TO-92 SCRN: CompakYMLXXCompak (C Package)S6N1 YMXXXDate Code MarkingDate Code MarkingY:Year CodeM: Month CodeL: Location CodeXX: Lot Serial CodeY:Year CodeM: Month CodeXXX: Lot Trace Code 2016 Littelfuse, Inc.Specifications are subject to change without notice.Revised: 05/02/16

1 Amp Standard SCRs Product Selector Part Number Voltage Gate Sensitivity Type Package 400V 600V 800V 1000V Sx01E X X 10mA Standard SCR TO-92 SxN1 X X 10mA Standard SCR Compak Note: x Voltage Dimensions - Compak (C Package) 0.079 (2.0) 0.040 (1.0) 0.030 (0.76) 0.079 (2.0) 0.079 (2.0) 0.110 (2.8) Pad Outl

Related Documents:

Cross Reference Guide Cross Reference Guide Part Number Source/ Competitor Teccor Device Direct or Suggested Replace-ment Teccor Package 40431 RCA Q4006LT S TO-220 (ISOL) 03P05M NEC S4X8ES S TO-92 (ISOL) 03P1M NEC S4X8ES S TO-92 (ISOL) 03P2M NEC S4X8ES S TO-92 (ISOL) 03P3M

72 State of Punjab vs Darshan Singh AIR 2003 SC 4179 73 State of UP and Ors Vs Roshan Singh (Dead) by LRs. and Ors. AIR 2008 SC 1190 74 State of West Bengal and Ors Vs Karan Singh Binayak and Ors AIR 2002 SC 1543 Order 1 Rule 8 of CPC 75 Narayan Bhagwantrao Gosavi Balajiwale Vs Gopal Vinayak Gosavi and Ors AIR1960SC100

KLN 94 Pilot's Guide 006-18207-0000 Operational Revision Status ORS 01, 02 and 03 July 2002 The ORS level is annunciated on the Turn-on page each time power is applied to the KLN 94 (see figure 3-3). Features limited to specific ORS levels are so designated in the text of this manual. The operational differ-ences between ORS levels are .

Guilty Except for Insanity (GEI) »ORS 161.295 and 161.327 Civil Commitment »ORS 426.005 and 426.701 Forensic Competency Evaluations »ORS 161.365 and 161.370. Different types of . Fitness To Proceed Statutes (current mental state) ORS 161.360 - Defines fitness to proceed, applies to all criminal fitness evaluations

wing pulley 5 1 2 3 3 6 4 oughing idler y ct idler ail pulle return idler ake-up bend pulle bend pulle snub pulle y t cleaner y bel t cleaner head/drie pulle ake-up pulle a b abrasive wear burning . gear drives couplings synchronous drives t drives ors ors ors ors maintenance roubleshooting guide 20 .

products are renowned for high quality and high reliability. Thanks to patented technology and superior silicon designs, Teccor th yristors can withstand high surge currents making them the most durable thyristors on the market today. SIDACtor Devices: Fast, Stable, Reliable and Cost Effective Teccor SIDACtor protection thyristors are the .

Strategic Brand Management Exeter MBA and MSc –Day 2 Brand Strategy Jack Buckner Aaker’s Brand Identity System BRAND IMAGE How the brand is now perceived BRAND IDENTITY How strategists want the brand to be perceived BRAND POSITION The part of the brand identity and value pro

1) General characters, structure, reproduction and classification of algae (Fritsch) 2) Cyanobacteria : General characters, cell structure their significance as biofertilizers with special reference to Oscillatoria, Nostoc and Anabaena.