Search electric chain hoist er2 and ner 2 series cylinder control
5. NOT use hoist with twisted, kinked, damaged, or worn load chain. 6. NOT use the hoist to lift, support, or transport people. 7. NOT lift loads over people. 8. NOT operate a hoist unless all persons are and remain clear of the supported load. 9. NOT operate unless load is centered under hoist. 10. NOT attempt to lengthen the load chain or .
Normal Headroom Hoist, MT Series (4/1) Normal Headroom Hoist, M Series (4/1) Low Headroom Hoist, MT Series (2/1) Low Headroom Hoist, M Series (2/1) Low Headroom Hoist, MT Series (4/1) Low Headroom Hoist, M Series (4/1) Explosion-proof Electric Wire Rope Hoist Double Girder Trolleys. Lifting & Travel Electr
(Paragraph 2-2) in area to be used; connect hoist to nearest air supply (paragraph 2-3); and check and adjust hoist speed (paragraph 2-4). 2-2. SUSPENDING HOIST. a. On hook suspended hoists, select a suitable overhead support in area hoist is to be used (one capable of holding combined weight of hoist and its rated load) and hang hoist up.
nb-m-04 trolley; double girder medium, 4 rope falls d002081-a nb-v-m1 hoist; machinery hoist 1 rope fall d002083-a nb-v-m2 hoist; machinery hoist 2 rope falls, opposite direct d002084-a nb-v-m2 hoist; machinery hoist 2 rope falls
nc-m-08 trolley; double girder medium, 8 rope falls d002103-a nc-v-m1 hoist; machinery hoist 1 rope fall d002108-a nc-v-m2 hoist; machinery hoist 2 rope falls, opposite direct d002109-a nc-v-m2 hoist; machinery hoist 2 rope falls
support structure has the sufficient strength to support the hoist and the rated working load. 2. Connect the hoist to the appropriate power supply. 3. Before using the hoist, apply oil to the chain for easier operation and to prolong the life span. 4. To attach the chain bag/ container run the hoist until it is fully extended (DOWN) and then .
6 DO NOT ECEED WORKING OAD IMIT. LE ALLS A 00-216-213 3 Ton Lift Lever Hoist 6 Ton Lift Lever Hoist STOCK NUMBER DESCRIPTION CAPACITY WEIGHT MLH30005 3 Ton, 5' Lift Lever Hoist 6,600 lbs. 36 lbs. MLH30010 3 Ton, 10' Lift Lever Hoist 6,600 lbs. 42 lbs. MLH30015 3 Ton, 15' Lift Lever Hoist 6,600 lbs. 48 lbs. MLH30020 3 Ton, 20' Lift Lever Hoist 6,600 lbs. 54 lbs.
26. Never weld or cut on a load suspended by the hoist. 27. Never use the hoist chain as a welding electrode. 28. Do not operate hoist if chain jumping, excessive noise, jamming, overloading, or binding occurs. 29. Only operate the hoist with manual power. 30. After use, or when in a non-operational mode the chain hoist should be secured against
hoist to air service (Paragraph 2-4). 2-2. SUSPENDING HOIST. a.On hook suspended hoists, select a suitable overhead support in area hoist is to be used (one capable of holding combined weight of hoist and its capacity load) and hang hoist up. Be certain that upper hook is firmly seated
NOT attempt to "free-chain" the hoist while a load is applied. 9. NOT use the hoist to lift, support, or transport people. 10. NOT lift loads over people and make sure all personnel remain clear of the supported load. 11. NOT attempt to lengthen the load chain or repair damaged load chain. 12. Protect the hoist's load chain from weld .
Hoist. This added I-ton single chain, 2-ton double chain and 3-ton triple chain models to the BUDGIT@ Air Hoist family. Series 6000 hoists are based on the same dependable BUDGIT@ Electric Hoist frame and feature many interchangeable parts. A need
from the hoist at 9 positions in accordance with DIN 45635, precision class 2. 2. OPERATING INSTRUCTIONS 2.1Correct operation Maximum capacity The Yale electric chain hoist model CPE is designed to lift and lower loads up to the rated capacity. The lifting capacity indicated on the hoist / trolley is the maximum safe working