Search sheathing
A. DensGlass Sheathing B. Insulation C. Framing D. Water-Resistive/Air Barrier E. Masonry Tie F. 2" (50 mm) Max. Air Space G. Brick Masonry Sheathing just as it would be over any other type of sheathing. Sheathing DensGlass Sheathing can be used in applications such as DensGlass Sheathing and into the steel or wood framing.
DensGlass Sheathing is available in 1/2" (12.7 mm) thickness and DensGlass Fireguard Sheathing is available in 5/8" (15.9 mm) thickness. DensGlass Sheathing is manufactured in a 4' (1219 mm) width and 8' (2438 mm), 9' (2743 mm) and 10' (3048 mm) lengths. Other lengths are available upon request. DensGlass Sheathing
sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 in. thick over the WSP, and a cladding system installed over the foam sheathing in low-rise residential buildings up to three stories in height (Figure 1). The primary application for this wall system is in Climate Zones 3-5 (Figure
sheathing, ASTM C1177 glass-mat sheathing, cement board, OSB, plywood) ASTM D 2247 Tensile Bond 103 kPa (15 psi) Tested over exterior gypsum sheathing, ASTM C1177 glassmat sheathing, cement board, OSB, plywood, CMU; pvc and galvanized flashing
sheathing, PermaBase cement-board by National Gypsum and other cement-boards (ASTM C1325 Type A Exterior), untreated Exposure I or exterior plywood sheathing (grade C-D or better), untreated Exposure I OSB, gypsum sheathing (ASTM C79/ ASTM C1396), Fire resistive sheathing such as MagTec ,
Installing Window with Foam Sheathing on a Wood-Frame Wall Step 1 Insulating sheathing on wood-frame wall For the foam sheathing to be an . flange at the head and jambs to provide a seal behind the nailing flanges of the window. The sill is left open to allow the cavity below the window to drain to the exterior. 9
Installing Window with Foam Sheathing on a Wood-Frame Wall Step 1 Insulating sheathing on wood-frame wall For the foam sheathing to be an . flange at the head and jambs to provide a seal behind the nailing flanges of the window. The sill is left open to allow the cavity below the window to drain to the exterior. 9
DensGlass(r) Sheathing Technical Guide 4. DensGlass(r) Shaftliner for Shaftwall/Stairwell Systems Technical Guide . Look for the distinctive GOLD color to ensure you're using genuine DensGlass Sheathing. Mold Resistance In independent testing, DensGlass Sheathing, with its fiberglass mat design, has achieved a score of 10, the highest level .
DensGlass Gold Exterior Sheathing is available in 1/2" thickness and DensGlass Gold Fireguard Type X Exterior Sheathing is available in 5/8" thickness. DensGlass Gold Exterior Sheathing panels are manufactured in a 4' width and 8', 9' and 10' lengths. Other le ngths ar v i b upo request. CCMC-12064-R LosAngelesRR-25008 ICC .
Sheathing or paneling is created using Revit Parts. In order to see the sheathing or paneling you have to select Show Parts or Show Both in View Properties Parts Visibility In the Element Properties you can find all information about every created sheathing/paneling segment. This information can later be used in tags and schedules.
Roof Slope 4:12 up 3:12-4:12 Less than 3:12 Wood Shingles Solid backing (pressure treated) Spaced strips Asphalt Shingles Solid Sheathing Spaced strips Wood Shakes Solid sheathing (pressure mated) Spaced strips Tile, Cement, or Clay Solid sheathing Spaced strips NR* NR * NR - This application not recommended.
roof sheathing is a structural element and, therefore, part of the framing. Sheathing provides a nailing base for the finish roof covering and gives rigidity and strength to the roof framing. Lumber and plywood roof sheathing are the most commonly used materials for pitched roofs. Plank or laminated roof decking is sometimes used in