Trencher Replacement Parts - Ballantine Inc
BALLANTINE Ditch Witch H314 Trencher Replacement PartsAmerican Made.American Strong. www.ballantineinc.com
Faster ServiceBetter QualityLower PricesReplacement Parts forDitch Witch TrenchersDitch Witch is a registered trade mark of Charles Machine Works Company.All manufacturers’ names, numbers, symbols and descriptions are used forreference purposes only and it is not implied that any parts listed are theproducts of the manufacturers.Main OfficeBranch OfficeBranch Office840 McKinley Street675 Wesleyan Drive South West2209 S. Lilac Ave.Anoka, Minnesota 55303Atlanta, Georgia 30336Rialto, California 92316Call Toll Free To Inside Sales1/800/328/2424FAX 1-763-427-2277Email: parts@ballantineinc.comwww.ballantineinc.com
BALLANTINEDitch Witch H314 AttachmentDitch Witch H314 Attachment - Bare Chain And Cup Cutter AssembliesBare Chain 2" Pitch Every 4thBallantine Part No.B2000400B21B2000400B24Dig Depth42"DescriptionBare Chain 21 Station48"Bare Chain 24 StationBare Chain 2" Pitch Anti Back FlexBallantine Part No.Dig DepthB2ABF00B4242"48"B2ABF00B48DescriptionBare Chain 42 StationBare Chain 48 StationCup Cutter Assemblies 2" Pitch Every 4thBallantine Part No.Dig DepthB2000406C21B2000406C24DescriptionCup Cutter Assembly 6" Cut 21 Station42"Cup Cutter Assembly 6" Cut 24 Station48"Cup Cutter Assembly 8" Cut 21 Station42"Cup Cutter Assembly 8" Cut 24 Station48"Wider Cutting Widths Available Upon RequestB2000408C21B2000408C24Cup Cutter Assemblies 2" Pitch Anti Back FlexBallantine Part ine 840 McKinley St., Anoka, MN 55303Phone: 800-328-2424 (US only) or 763-427-3959Dig DepthDescription42"Cup Cutter Assembly 6" Cut 42 StationCup Cutter Assembly 6" Cut 48 Station48"Cup Cutter Assembly 8" Cut 42 Station42"Cup Cutter Assembly 8" Cut 48 Station48"Wider Cutting Widths Available Upon Request1Fax: 763-427-2277www.ballantineinc.com
BALLANTINEDitch Witch LT314 Attachment - Chain Assemblies Using Terminator TeethDitch Witch H314 AttachmentTerminator & Cup Combination AssembliesBallantine Part No.T2ABF06M42T2ABF06M48T2ABF08M42T2ABF08M48Dig DepthDescription42"1/2 Terminator & 1/2 Cup 6" 42 Station1/2 Terminator & 1/2 Cup 6" 48 Station48"1/2 Terminator & 1/2 Cup 8" 42 Station42"1/2 Terminator & 1/2 Cup 8" 48 Station48"Wider Cutting Widths Available Upon RequestBolt On Terminator AssembliesBallantine Part No.T2ABF0642T2ABF0648T2ABF0842T2ABF0848Dig DepthDescription42"Terminator Bolt On 6" Cut 42 StationTerminator Bolt On 6" Cut 48 Station48"Terminator Bolt On 8" Cut 42 Station42"Terminator Bolt On 8" Cut 48 Station48"Wider Cutting Widths Available Upon RequestTerminator ChainsBallantine Part ine 840 McKinley St., Anoka, MN 55303Phone: 800-328-2424 (US only) or 763-427-3959Dig Depth42"48"42"48"DescriptionTerminator Bolt On 6" Cut 42 StationTerminator Bolt On 6" Cut 48 StationTerminator Bolt On 8" Cut 42 StationTerminator Bolt On 8" Cut 48 Station2Fax: 763-427-2277www.ballantineinc.com
BALLANTINEDitch Witch H314 AttachmentDitch Witch H314 Attachment - Chain Assemblies Using Rotary Carbide BitsRock & Cup Combination AssembliesBallantine Part No.B2ABF06M42B2ABF06M48B2ABF08M42B2ABF08M48Dig DepthDescription1/2 Carbide & 1/2 Cup 6" Cut 42 Station42"1/2 Carbide & 1/2 Cup 6" Cut 48 Station48"1/2 Carbide & 1/2 Cup 8" Cut 42 Station42"1/2 Carbide & 1/2 Cup 8" Cut 48 Station48"Wider Cutting Widths Available Upon RequestBolt On Rock & Frost AssembliesBallantine Part No.B2ABF06R42B2ABF06R48B2ABF08R42B2ABF08R48Dig DepthDescriptionRock & Frost Assembly 6" Cut 42 Station42"Rock & Frost Assembly 6" Cut 48 Station48"Rock & Frost Assembly 8" Cut 42 Station42"Rock & Frost Assembly 8" Cut 48 Station48"Wider Cutting Widths Available Upon RequestAlligator ChainsBallantine Part lantine 840 McKinley St., Anoka, MN 55303Phone: 800-328-2424 (US only) or 763-427-3959Dig Depth42"48"42"48"DescriptionAlligator Chain 6" Cut 42 StationAlligator Chain 6" Cut 48 StationAlligator Chain 8" Cut 42 StationAlligator Chain 8" Cut 48 Station3Fax: 763-427-2277www.ballantineinc.com
BALLANTINEDitch Witch H314 AttachmentDitch Witch Chain Componets For 2" Pitch Every 4th And 2" Pitch Anti Back FlexChain Repair Componets For 2" Pitch Every 4th And 2" Pitch Anti Back FlexChain Repair Componets For 2" Pitch Every 4th And 2" Anti Back FlexBallantine Part No.B2ABF00B01OEM Part NumberN/ADescriptionChain Repair Section Anti Back FlexBallantine Part No.B2000400B01OEM Part NumberN/ADescriptionChain Repair Section Every Fourth PitchBallantine Part No.B135351OEM Part NumberN/ADescriptionConnecting Pin & KeeperBallantine Part No.B135358OEM Part NumberN/ADescription"T" Head KeeperCup CuttersBallantine Part No.B135924OEM Part Number135-1233DescriptionCup Cutter Right HandBallantine Part No.B135925OEM Part Number135-1236DescriptionCup Cutter Left HandBallantine Part No.B135502OEM Part NumberN/ADescriptionGround Breaker Right HandBallantine Part No.B135501OEM Part NumberN/ADescriptionGround Breaker Left HandTerminator AdaptersBallantine Part No.T20004ROEM Part Number136-237DescriptionTerminator Adapter Right Hand - C.C. - 4" CutBallantine Part No.T20004LOEM Part Number136-236DescriptionTerminator Adapter Left Hand -C.C. - 4" CutBallantine Part No.T20005ROEM Part Number136-238DescriptionTerminator Adapter Right Hand - 5" CutBallantine Part No.T20005LOEM Part Number136-239DescriptionTerminator Adapter Left Hand - 5" CutBallantine Part No.T20006ROEM Part Number136-241DescriptionTerminator Adapter Right Hand - 6" CutBallantine Part No.T20006LOEM Part Number136-240DescriptionTerminator Adapter Left Hand - 6" CutBallantine Part No.T20000SOEM Part NumberN/ADescriptionTerminator Adapter Straight CutBallantine 840 McKinley St., Anoka, MN 55303Phone: 800-328-2424 (US only) or 763-427-39594Fax: 763-427-2277www.ballantineinc.com
BALLANTINEDitch Witch H314 AttachmentChain Repair Componets For 2" Pitch Every 4th And 2" Pitch Anti Back FlexBallantine Part No.B136036OEM Part Number136-036DescriptionRock & Frost Adapter Right Hand - C.C. - 4" CutBallantine Part No.B136037OEM Part Number136-037DescriptionRock & Frost Adapter Left Hand -C.C. - 4" CutBallantine Part No.B136038OEM Part Number136-038DescriptionRock & Frost Adapter Left Hand - 5" CutBallantine Part No.B136039OEM Part Number136-039DescriptionRock & Frost Adapter Right Hand - 5" CutBallantine Part No.B136040OEM Part Number136-040DescriptionRock & Frost Adapter Right Hand - 6" CutBallantine Part No.B136041OEM Part Number136-041DescriptionRock & Frost Adapter Left Hand - 6" CutBallantine Part No.765CRFNOEM Part NumberN/ADescriptionCarbide Bit - Full Cap - Includes ClipBallantine Part No.K91OEM Part NumberN/ADescriptionSeparate ClipBallantine Part No.765HBOEM Part NumberN/ADescriptionCarbide Bit - Rock BusterBallantine Part No.765CBOEM Part NumberN/ADescriptionCarbide Bit - Full CapBallantine 840 McKinley St., Anoka, MN 55303Phone: 800-328-2424 (US only) or 763-427-39595Fax: 763-427-2277www.ballantineinc.comDitch Witch Chain Componets For 2" Pitch Every 4th And 2" Pitch Anti Back FlexRock & Frost Adapters
BALLANTINEDitch Witch H314 AttachmentChain Componets For 2" Pitch Every 4th And 2" Pitch Anti Back FlexDitch Witch Chain Componets For 2" Pitch Every 4th And 2" Anti Back FlexAdaptersBallantine Part No.B135912OEM Part NumberN/ADescriptionAdapter For 8" CutBallantine Part No.B135950OEM Part NumberN/ADescriptionAdapter For 10" CutBallantine Part No.B135913OEM Part NumberN/ADescriptionAdapter For 12" CutFlat SpacersBallantine Part No.6573375OEM Part NumberN/ADescriptionFlat Spacer 1" ThickBallantine Part No.V30OEM Part NumberN/ADescriptionFlat Spacer 5/16" ThickTube SpacersBallantine Part No.B135952OEM Part NumberN/ADescriptionTube Spacer Outside MountingBallantine Part No.B135951OEM Part NumberN/ADescriptionTube Spacer Cup Mounted InsideBallantine Part No.B135043SOEM Part NumberN/ADescriptionTube Spacer Rock & Frost Or Terminator Inside MountingBoltsBallantine Part No.12201148OEM Part NumberN/ADescriptionBolt 1/2" X 20 X 1 1/4" Grade 8Ballantine Part No.12202148OEM Part NumberN/ADescriptionBolt 1/2" X 20 X 2 1/4" Grade 8Ballantine Part No.12202128OEM Part NumberN/ADescriptionBolt 1/2" X 20 X 2 1/2" Grade 8Ballantine Part No.122038OEM Part NumberN/ADescriptionBolt 1/2" X 20 X 3" Grade 8Ballantine Part No.12203148OEM Part NumberN/ADescriptionBolt 1/2" X 20 X 3 1/4 " Grade 8Ballantine Part No.12203128OEM Part NumberN/ADescriptionBolt 1/2" X 20 X 3 1/2" Grade 8Ballantine Part No.12203348OEM Part NumberN/ADescriptionBolt 1/2" X 20 X 3 3/4" Grade 8Ballantine Part No.122048OEM Part NumberN/ADescriptionBolt 1/2" X 20 X 4" Grade 8Ballantine Part No.12204128OEM Part NumberN/ADescriptionBolt 1/2" X 20 X 4 1/2" Grade 8Ballantine Part No.1220OEM Part NumberN/ADescriptionLock Nut 1/2" X 20Ballantine 840 McKinley St., Anoka, MN 55303Phone: 800-328-2424 (US only) or 763-427-39596Fax: 763-427-2277www.ballantineinc.com
BALLANTINEDuck Bill Pilot BitsDitch Witch H314 AttachmentDrive SprocketsBallantine Part No.B142127OEM Part Number142-127DescriptionDrive Sprocket Split 12 ToothBallantine Part No.B142044OEM Part Number142-044DescriptionDrive Sprocket Split 14 ToothBallantine Part No.B105761OEM Part Number105-761DescriptionDrive Sprocket Bolt (8 Required )Ballantine Part No.B105159OEM Part Number105-159DescriptionCam Washer ( 16 Required )Ballantine Part No.B142031OEM Part Number140-031DescriptionAuger Sprocket 14 Tooth Hex BoreBoom End Roller And Boom End SprocketBallantine Part No.B142751OEM Part Number142-751DescriptionBoom End Roller Assembly - 14 1/2" O.D.Ballantine Part No.B142752OEM Part Number142-752DescriptionBoom End Roller - 14 1/2" O.D.Ballantine Part No.B142020OEM Part NumberN/ADescriptionBoom End Sprocket Assembly - 24 ToothBallantine Part No.B142021OEM Part NumberN/ADescriptionBoom End Sprocket - 24 ToothBallantine Part No.B125209OEM Part Number125-209DescriptionBearing Kit - Includes All Items With An Asterisk *Ballantine Part No.B747568 *OEM Part NumberN/ADescriptionBearing Cup (2 Required )Ballantine Part No.B747576 *OEM Part NumberN/ADescriptionBearing Cone ( 2 Required )Ballantine Part No.NPN04-05-94-1 *OEM Part NumberN/ADescriptionBearing Crush RingBallantine Part No.NPN04-05-94-2 *OEM Part NumberN/ADescriptionSnap RingBallantine Part No.B180062 *OEM Part Number180-062DescriptionDirt Shield (2 Required )Ballantine 840 McKinley St., Anoka, MN 55303Phone: 800-328-2424 (US only) or 763-427-39597Fax: 763-427-2277www.ballantineinc.comDitch Witch H314 Attachment - Hard PartsAuger Sprocket
BALLANTINEDitch Witch H314 AttachmentChain Components For 2" Pitch Every 4th And 2" Pitch Anti Back FlexDitch Witch H314 Attachment - Hard PartsBoom End Roller And Boom End SprocketBallantine Part No.B180448OEM Part Number180-448DescriptionIdler ShaftBallantine Part No.B105313OEM Part Number105-313DescriptionIdler Shaft NutBallantine Part No.B115165OEM Part Number115-165DescriptionPipe PlugBallantine Part No.B115009OEM Part Number115-001DescriptionGrease ZerkBoom ComponentsBallantine Part No.B151053OEM Part Number151-053DescriptionGrease CylinderBallantine Part No.B159093OEM Part Number159-093DescriptionRelief ValveAugers And Auger ComponentsBallantine Part No.B145070OEM Part Number145-070DescriptionAuger Right Hand 24"Ballantine Part No.B145071OEM Part Number145-071DescriptionAuger Left Hand 24"Ballantine Part No.B145109OEM Part Number145-109DescriptionAuger Right Hand 12"Ballantine Part No.B145110OEM Part Number145-110DescriptionAuger Left Hand 12"Ballantine Part No.B105391OEM Part Number105-391DescriptionAuger BoltBallantine Part No.3410OEM Part Number105-953DescriptionAuger NutBallantine Part No.B145244OEM Part Number145-244DescriptionDouble Auger ShaftBallantine Part No.B145245OEM Part Number145-245DescriptionSingle Auger ShaftBallantine Part No.B184189OEM Part Number184-189DescriptionSpacer For Double Auger Shaft 1.600" Long (2 Required)Ballantine Part No.B184188OEM Part Number184-188DescriptionSpacer For Single Auger Shaft 2.900" LongBallantine 840 McKinley St., Anoka, MN 55303Phone: 800-328-2424 (US only) or 763-427-39598Fax: 763-427-2277www.ballantineinc.com
BALLANTINEDuck Bill Pilot BitsDitch Witch H314 AttachmentDrive SprocketsAugers And Auger ComponentsOEM Part Number125-620DescriptionHex Flange BearingBallantine Part No.B145290OEM Part Number145-290DescriptionBearing PlateBallantine Part No.B143021OEM Part Number145-021DescriptionZerk GuardBallantine Part No.B184076OEM Part Number184-076DescriptionGuard Bushing (2 Required Per Bearing)Ballantine Part No.B106632OEM Part Number106-632DescriptionBolt Bearing To Plate (2 Required Per Bearing)Ballantine Part No.B106594OEM Part Number106-594DescriptionBolt Zerk Guard To Plate (2 Required Per Bearing)Ballantine Part No.B106685OEM Part Number106-685DescriptionNuts for Bearing Plate (4 required Per Bearing)Ballantine 840 McKinley St., Anoka, MN 55303Phone: 800-328-2424 (US only) or 763-427-39599Fax: 763-427-2277www.ballantineinc.comDitch Witch H314 Attachment - Hard PartsBallantine Part No.B125620
Corporate Headquarters: 840 McKinley Street, Anoka, MN 55303Warehouse: 2209 South Lilac Ave., Rialto, CA 92316Warehouse: 675 Wesleyan Drive SW, Atlanta, GA 30336www.ballantineinc.comphone: 800-328-2424 fax 763-427-2277 parts@ballantineinc.com 2016 U.S. Tsubaki Power Transmission, LLC. All Rights ReservedPrinted in the U.S.A. 05/17All manufacturers’ names, numbers, symbols and descriptions are used for reference purposes only and it is not implied that any parts listed are the products of the manufacturer.
Ditch Witch Trenchers. Ditch Witch is a registered trade mark of Charles Machine Works Company. All manufacturers’ names, numbers, symbols and descriptions are used for . reference purposes only and it is not implied that any parts listed are the products of the manufacturers. Call Toll
Ditch Witch HT220 Track Machine Are Also Available From Ballantine, Inc. Ballantine Provides Digging Systems Designed for Large Track Trenchers in All Ground Conditions Throughout the World. Take Advantage of Ballantine’s Superior Quality Products and Our 50 Years of Expertise in the Trenching Industry.
trencher will make the unit creep sideways downhill. Try to dig with the trencher in a level position. 8. Never try to make sharp turns while trenching. The trencher boom could become wedged in the trench and damaged. 9. Never attempt to free a stuck chain with the unit running. If the trencher does become jammed, stop the unit and visually .
Ballantine, Inc. Ditch Witch Replacement Parts Page i Index Index Page 1 Trencher Chain Identification Sheet Page 2 Chain Assembly Guide Page 3 Chain Assembly Configurations Page 4 Smart Part Numbering System Page 5 Chains for Walk Along Models Page 6 Model(s): M, M422 Series. Drive Parts
MODEL 712MT HYDRAULIC MICRO TRENCHER EXPLODED VIEWS WITH PART NUMBERS CONGRATULATIONS! You are now the proud owner of a BARRETO trencher. The following pages have detailed views of your trencher, along with corresponding part numbers. If you have any questions or need any r
To curl trencher up/tilt trencher up, tilt mount plate up. To curl trencher down/tilt trencher down, tilt mount plate down. To start digging chain, engage attachment drive (auxiliary) control in forward. To reverse digging chain, engage attachment drive (auxiliary) control in reverse. c00ic015c.eps c00ic016c.eps c00ic018c.eps c00ic017c.eps .
Trencher Chain Identification Sheet Measure Pitch Size (Center of Pin to Center of Next Pin) 1.654" 2.000" 2.043" 2.609" 2.648" 3.067" 3.075" 3.110" 3.125" 3.250" 4.000" 4.500" Every 4th Pitch Attachment Spacing Anti-Backflex Chain Left-hand cutter Right-hand Cutter K-Style Chain Deter
tracks, and carbide teeth for road milling & paving equipment, excavators, pile drivers, . TESMEC (Trencher) TRENCOR (Trencher) VERMEER (Trencher) WIRTGEN VOGELE Excavators COLD MiLLiNG PLANERS . Pattern 280*72 25 75 30 26 27 19 26 76 RT1
ditch witch model 1230 self-propelled walk-behind, ditch witch model 1030 self-propelled walk-behind, manually steered, two-wheel drive, rigid-frame, manually steered, two-wheel drive, rigid-frame, chain-type trencher chain-type trencher dimensions* u.s. metric u.s. metric a trench depth, maximum* 36 in 910 mm 30 in 760 mm
