14040 Energy Chain System E4 Light 14140 Series 14040 .
1404014140R18840Price IndexEnergy Chain System E4 LightSeries 14040/14140/R188402.20”Features & BenefitsKMA mounting brackets with attachment points on allSeries 14040Series 14140sidesLocking or pivoting mounting brackets availableSeries R18840Special Features / OptionsHinged snap-open removable lids along outer radiusof Energy TubeLateral glide surfaces for side-mounted operationESD classification:Electrically conductiveESD/ATEX version upon requestHigh torsional rigidityStrain relief elements can be integrated with themounting bracketClosed and open styles can be combinedRemovable lids along inner radiusSide-mounted - unsupportedHigh side-mount stability due to undercutCrossbars on Energy Chains are removable alongAssembly Tipsboth radiiWide, rounded plastic crossbars - cable friendlyEnergy Chain also available with reverse bending radiiOpening Energy Chains : Remove crossbars and clips - Insert screwdriver into theslot, push down, release by lever actionRemove lids/bottoms (Energy Tubes) - Insert screwdriver into the slot, release bylever actionOther Installation MethodsVertical, hanging 262 ft (80 m)Vertical, standing 19.69 ft (6 m)Side-mounted, unsupp. 6.56 ft (2 m)Rotary requires further calculationUsage Guidelines If a simpler low-cost solution isrequired For maximum inner width withminimal outer width If the Series 400 is too large If a quieter version is required‰ Series 400/410/R880 If side-mounted chain/tube with along unsupported travel is required‰ Series 4040/4140/R8840 If more inner height is required‰ Series 14240/143406.199Order Example: Complete Energy Chain energy chain configuratorPlease indicate chain length or number of links. Example:16.4 ft (5 m) 14040-30-300-0Energy Chain With 2 separators 411 assembled every 2nd linkInterior Separation1 Set 141400-30-12PMounting Bracket2.20”
Energy Chain System E4 LightSeries 14040/14140/R18840Installation Dimensions Short travel, unsupported lengthl FLB unsupported with permitted sagl FLG unsupported with straight upper runFurther information ‰ Design, Chapter 133.60Short Travels Unsupported26.8820.1613.44FLBUnsupportedEnergy Chains positivefeaturecamber over short travels.This must be accounted forwhen specifying the clearance height. Please refer toInstallation dimensions forfurther 64S (FLG)6.564.928.20Legend9.8413.1216.4111.48 14.76S Unsupported length in ft FLB / FLGLength of travelR Bending radiusS (FLB)013.126.5619.6926.2532.81H Nominal clearanceheightLength of travel S in ftSD Overlength EnergyS/2R3.31(84)Fixed EndHMoving EndHF H 1.97 (50)Chain radius in finalH - 3.31 (84)DpositionKPitch per link: 3.58” (91 mm)5.31 (135)5.91 (150)6.89 (175)7.87 (200)HRI Trough inner heightFor center mount applications:H2 *Mounting heightChain length /2 KsD2 Overlength - longtravels, glidingK2 *Add-on9.84 (250)11.81 (300)15.75 (400)14.17 (360) 15.16 (385)17.13 (435)19.09 (485)23.03 (585)26.97 (685)34.84 (885) 42.72 (1085)D10.63 (270) 11.22 (285)12.20 (310)13.19 (335)15.16 (385)17.13 (435)21.06 (535)K25.59 (650) 29.53 (750)32.48 (825)35.43 (900) 41.34 (1050) 48.23 (1225) 57.09 (1450) 69.88 (1775)For long travels with lowered mounting height25.00 (635)Chain length: /2 K2sSLong Travels GlidingD2S/2K2H2Fixed endRHRIMoving endGuide trough with glide barGuide trough without glide barTotal length of guide troughR5.31 (135)5.91 (150)6.89 (175)7.87 (200)9.84 (250)11.81 (300)15.75 (400)19.68 (500)H210.47 (266) 10.47 (266)10.47 (266)10.47 (266)10.47 (266)10.47 (266)10.47 (266)10.47 (266)K220.87 (530) 27.95 (710)2.20”For center mount applications:Long travel lengths from 32.8 ft.(10m) to max. 492 ft. (150m)S/2*If the mounting bracketlocation is set lower19.68 (500)H* 25D2 25 15.35 (390) 17.72 (450)heightLinks per ft (m): 3.35 (11)The required clearance height: HF H 1.97 in. (50 mm) (with 1.34 lbs/ft (2 kg/m) fill weight. Please consult igus if spaceis particularly restricted.-0 π R safety bufferHF Required clearance3.58(91)R1404014140R18840PDF: www.igus.com/e-chain-pdfsSpecs/CAD/RFQ: www.igus.com/e-chainsRoHS info: www.igus.com/RoHSFill weight lbs/ftenergy chain configurator36.22 (920) 44.09 (1120)If the unsupported length isexceeded, the EnergyChain /Tube must glide onitself. This requires a guidetrough.Design, Chapter 160.24 (1530) 72.05 (1830)28.66 (728) 32.24 (819) 39.41 (1001) 50.16 (1274) 64.49 (1638) 75.23 (1911) 100.31 (2548) 125.39 (3185)For support of the lower run, see Chapter 9 for the Support Tray tool kitTechnical DataSpeed / acceleration FLGmax. 65.6 ft/s (20 m/s) / max. 656 ft/s2 (200 m/s2)Speed / acceleration FLBmax. 9.84 ft/s (3 m/s) / max. 19.69 ft/s2 (6 m/s2)Gliding speed / acceleration (maximum)max. 32.8 ft/s (10 m/s) / max. 164 ft/s2 (50 m/s2)Material - permitted temperatureigumid G / -40 F (-40 C) up to 248 F ( 120 C)Flammability Class, igumid GVDE 0304 IIC UL94 HBF Details of materialproperties‰ Chapter 16.200
Energy Chain System E4 LightSeries 14040/14140/R18840energy chain configuratorSeries 14040 - Energy Chain with crossbars every linkBaBiSeries140403.31 (84)1.97max. 2.20 (56)igus Energy ChainSystem 1404014140R18840R Crossbars every linkFor use with rigid hydraulichosesFor particularly demandingapplicationsCan be opened from bothsidesPart Number Structure14040- 30- 250- 0Color - BlackBending radiusWidthSeries6.201BaBi3.31 (84)Series141402.20 (56)1.97max. R Crossbars every other link Standard configurationFor nearly every situationCan be opened from bothsidesEasy assemblyStableCost-effectivePart Number Structure14140- 30- 250- 0Color - BlackBending radiusWidthSeriesSeries R18840 - fully enclosed Energy TubeBaBi3.31 (84)1.97max.SeriesR18840 2.20 (56)R Fully enclosedExcellent cable and hoseprotection against dirtProtection against hot chipsup to 1652 F (900 C)Lids along inner radius arecompletely removableLids along the outer radiusare single-sided, snap open,hinged on one side as well ascompletely removablePart Number Structure18840- 30- 250- 0Color - BlackBending radiusWidthSeriesEnergy Chain as separate parts, links and side platesRight side link*, single part - Part No. 4040-02- RBiSMoving EndRFixed End3.58(91)Single bottom, Energy Tube - Part No. 886- BiBiLeft side link*, single part - Part No. 4040-01- RBi*View from the fixed point of the Energy Chain /Energy TubeHS/2HF H 1.97 (50)DH - 3.31 (84)Single crossbar, Energy Chain - Part No. 450- BiBiSingle lid, Energy Tube - Part No. 885- BiBi3.31(84)Internet: http://www.igus.comemail: sales@igus.comQuickSpec: http://www.igus.com/quickspecTelephone 1-800-521-2747Fax1-401-438-7270Series 14140 - Energy Chain with crossbars every other link
Energy Chain System E4 LightSeries 14040/14140/R18840 energy chain configuratorSupplement part number with required radius. Example: 14040-30- 300 -0Pitch: 3.58 in. (91mm) per link links/ft(m) 3.35 (11)1404014140R18840BiBa1404014140R18840in. (mm)in. (mm)lbs/ft (kg/m)lbs/ft (kg/m)lbs/ft (kg/m)-01.97 (50)2.99 (76) 1.79 (2.66) 1.67 (2.48)–-02.56 (65)3.58 (91) 1.66 (2.47) 1.69 (2.51)–18840-07--0*2.95 (75)3.98 (101) 1.85 (2.75) 1.51 (2.25) 2.15 (3.20)-03.43 (87)4.45 (113) 1.91 (2.84) 1.61 (2.44)–14140-10-18840-10--03.94 (100)4.96 (126) 1.97 (2.93) 1.75 (2.61) 2.35 (3.49)14040-11-14140-11--04.41 (112)5.47 (139) 2.06 (3.06) 1.79 (2.67)–14040-12-14140-12-18840-12--04.92 (125)5.94 (151) 2.10 (3.12) 1.82 (2.71) 2.59 (3.85)14040-13-14140-13--05.39 (137)6.46 (164) 2.19 (3.26) 1.86 (2.77)–14040-15-14140-15-18840-15--05.91 (150)6.93 (176) 2.23 (3.32) 1.89 (2.81) 2.88 (4.28)14040-16-14140-16--06.38 (162)7.44 (189) 2.30 (3.43) 1.92 (2.86)–14040-17-14140-17--06.89 (175)7.91 (201) 2.38 (3.54) 1.96 (2.92) 3.05 y .36 (187)8.43 (214) 2.45 (3.65) 2.00 (2.97)–-07.87 (200)8.90 (226) 2.47 (3.67) 2.00 (2.98) 3.26 (4.85)14140-21--08.35 (212)9.41 (239) 2.54 (3.78) 2.04 (3.04)–14140-22--08.86 (225)9.88 (251) 2.59 (3.85) 2.06 (3.07)–18840-20--09.33 (237)10.39 (264) 2.67 (3.98) 2.11 (3.14)–18840-25--09.84 (250)10.87 (276) 2.73 (4.07) 2.14 (3.18) 3.75 (5.58)-010.31 (262)11.38 (289) 2.80 (4.16) 2.16 (3.22)–18840-27-010.83 (275)11.85 (301) 2.87 (4.27) 2.20 (3.28) 3.93 (5.85)-011.30 (287)12.36 (314) 2.88 (4.29) 2.21 (3.29)–18840-30--011.81 (300)12.83 (326) 3.03 (4.51) 2.28 (3.40) 4.19 (6.24)14140-31--012.28 (312)13.35 (339) 3.07 (4.57) 2.30 (3.42)–14140-32--012.79 (325)13.82 (351) 3.09 (4.60) 2.31 (3.44)–-013.27 (337)14.33 (364) 3.21 (4.77) 2.37 (3.53)–-013.78 (350)14.80 (376) 3.31 (4.93) 2.43 (3.61) 4.70 (6.99)14140-36--014.25 (362)15.31 (389) 3.32 (4.94) 2.43 (3.61)–14140-37--014.76 (375)15.79 (401) 3.33 (4.95) 2.43 (3.62)–18840-35--015.24 (387)16.30 (414) 3.39 (5.04) 2.46 (3.66)–-015.75 (400)16.77 (426) 3.52 (5.24) 2.53 (3.76) 5.34 (7.94)14140-41--016.22 (412)17.28 (439) 3.62 (5.39) 2.58 (3.84)–14140-42--016.73 (425)17.76 (451) 3.72 (5.54) 2.63 (3.92)–14040-43-14140-43--017.20 (437)18.27 (464) 3.77 (5.61) 2.65 (3.95)–14040-45-14140-45--017.72 (450)18.74 (476) 3.82 (5.68) 2.67 (3.98)–14040-46-14140-46--018.19 (462)19.25 (489) 3.83 (5.70) 2.68 (3.99) 5.64 (8.40)14040-47-14140-47--018.70 (475)19.72 (501) 3.92 (5.83) 2.73 (4.06)–14040-48-14140-48--019.17 (487)20.24 (514) 3.94 (5.86) 2.74 (4.08)–14040-50-14140-50--019.69 (500)20.71 (526) 4.00 (5.96) 2.78 (4.13)–14040-51-14140-51--020.16 (512)21.22 (539) 4.02 (5.98) 2.78 (4.14)–14040-52-14140-52--020.67 (525)21.69 (551) 4.05 (6.03) 2.80 (4.16)–14040-53-14140-53--021.14 (537)22.20 (564) 4.15 (6.18) 2.85 (4.24)–14040-55-14140-55--021.65 (550)22.68 (576) 4.48 (6.67) 3.01 (4.48)–14040-60-14140-60--023.62 (600)24.65 (626) 4.69 (6.98) 3.08 (4.58)–18840-40-18840-46-PDF: www.igus.com/e-chain-pdfsSpecs/CAD/RFQ: www.igus.com/e-chainsRoHS info: www.igus.com/RoHSPart Number.CrossbarsEvery linkChoose from the radii below for all of the above sizesR adius (mm)135**R150175200300Example: 14040-30--02503004005005.31 (135)5.91 (150)6.89 (175)7.87 (200)9.84 (250)11.81 (300)15.75 (400)19.68 (500)H* 2514.17 (360)15.16 (385)17.13 (435)19.09 (485)23.03 (585)26.97 (685)34.84 (885)42.72 (1085)D10.63 (270)11.22 (285)12.20 (310)13.19 (335)15.16 (385)17.13 (435)21.06 (535)25.00 (635)K25.59 (650)29.53 (750)32.48 (825)35.43 (900)41.34 (1050)48.23 (1225)57.09 (1450)69.88 (1775)-0** This radius is not available for the R18840 Series*Removable lid only, no hinged option0 Standard color black. For other colors see Chapter 1For wider chains see page 6.135. For large diameter hoses see page 6.1356.202
Energy Chain System E4 LightSeries 14040/14140/R18840Interior Separation 1404014140R18840energy chain configuratorigus Energy ChainSystem Option 1: Vertical separators and spacersVertical separators are used if a vertical subdivision of the Energy Chain interior is required. By standard,vertical separators are assembled every other Energy Chain link.NOTE: Observe a lateral spacing of at least 1.30 in. (33mm) for Energy Tubes and .63 in. (16mm) forEnergy Chain . There is no minimum spacing needed for side platesEnergyChain Telephone 1-800-521-2747Fax1-401-438-7270min. 0.63”16 mmEnergyTube411A415-X484STANDARD411414.12 (3)VerticalseparatorVertical.12 (3)separator483Locking.12 (3).83(21)Internet: http://www.igus.comemail: sales@igus.comQuickSpec: http://www.igus.com/quickspec.14 (3.5)separator406Asymmetric.71(18).18 (4.5).71(18)UnassembledPart No. 401AssembledPart No. 411Vertical separatorUnassembledPart No. 483AssembledPart No. 484Locking separator(chain only)UnassembledPart No. 404AssembledPart No. 414Locking separator(tube only)UnassembledPart No. 406AssembledPart No. 416UnassembledPart No. 401AAssembledPart No. 411ASpacer(chain only)Spacers405-XXVertical separatorAsymmetrical separator(chain only).12(3)separator401Amin. 1.30”33 mm Standard separator 401 for Energy Chains andEnergy TubesThis separator offers safe stability due to its widebase design, also when used with thick cables orhoses. Vertical separator 483 for Energy Chains andEnergy TubesThis separator offers a narrow base for applicationswhere a large number of small cables need to beindividually separated. Locking separator 404 for Energy Chains This separator features increased retention force forapplications exposed to very high humidity andextreme loads. The extra retention force is achievedby asymmetric claws for the crossbar. Take care toensure proper alignment. Locking separator 406 for Energy TubesIt features a single sided, secure fit, and can beplaced on the lid or the bottom of the Energy Tube.The single side locking design helps to eliminatedifficulties in assembling the opposite cover orcrossbar Asymmetrical separator 401A for Energy Chains This separator features an (18mm) base. It can beused in combinations between spacers of differentwidths and vertical separators in side mountedapplications. NOTE ON SPACERSVertical separators are adjustable, but can be fixedin position by means of a spacer. Spacers are mostoften necessary for side mounted applications.The available inner height is reduced by .08” (2mm)per spacer (for example if one spacer is placed oneither side of the separator, the overall inner heightis reduced by .16” (4mm). To avoid this, place thespacers on the outside of the opening crossbar(not for long 3411XXUnassembledPart No. 405-XXAssembledPart No. 415-XXXX width of the spacerSpacers available in the following sizes:Part No.Part No.Unassembled Assembledin.(mm)405 -10415 -10.39”(10)405 -15415 -15.59"(15)405 -20415 -2079”(20)405 -30415 -301.18”(30)405 -40415 -401.57”(40)
Energy Chain System E4 LightSeries 14040/14140/R18840Interior Separation energy chain configurator1404014140R18840.28(7)Side plates 402This component is used to form the basicpattern of a shelf system.Side plate.16 (4) 421-XUnassembledPart No. 402AssembledPart No. 412420419418413Side plate402PDF: www.igus.com/e-chain-pdfsSpecs/CAD/RFQ: www.igus.com/e-chainsRoHS info: www.igus.com/RoHS413412 .28 (7).55(14).55(14).28 (7)Energy Chains and Energy Tubescan be subdivided both verticallyand horizontally using the variousinterior separation elements.‰ Design, Chapter 1 for layoutrecommendations.28 (7)Option 2: ShelvesVertical separatorVertical separator 403This component is used to form the basicpattern of a shelf system.31(8)Locking vertical separator 410This separator is slotted and able to becombined with shelves. For Energy Chains only.31 (8)Slotted separators 408These are used for very complexsubdivisions. However, they cannot beretrofitted into an existing separation systemwithout removing the shelves first.12 (3).83(21)UnassembledPart No. 403AssembledPart No. 413Vertical separator403Locking vertical separatorLocking verticalUnassembledPart No. 410separatorAssembledPart No. 420410Slotted separators, closed.24(6)Slotted separator 409This separator can be retrofitted into anexisting interior separation system withoutremoving the shelves, as long as theseshelves fit into any of the 3 middle slots.12 (3).39(10)Closed slottedUnassembledPart No. 408separatorAssembledPart No. 418408Slotted separators, openOpen slottedUnassembledPart No. 409separatorAssembledPart No. 419409Shelves 420-XXThese components form the basic pattern of a shelf system. Shelves of various widths can be arranged at 7 different heights in .28”(7mm) incrementsUsablePart No.Part No.UsablePart No.Part No.Width XWidthUnassembled AssembledWidth XWidthUnassembled Assembledin. (mm)in. (mm)in. (mm)in. (mm)X- .31 (8).71(18).39(10)420-18421-182.95 (75)2.64 (67)420-75.91(23).59(15)420-23421-233.46 (88)3.15 (80)420-88421-88.98(25).67(17)420-25421-253.94 (100)3.62 (92)420-100421-1001.10 (28).79(20)420-28421-284.92 (125)4.61(117)420-125421-1251.30 (33).98(25)420-33421-335.91 (150)5.59(142)420-150421-1501.69 (43)1.38 (35)420-43421-436.89 (175)6.57(167)420-175421-1751.97 (50)1.65 (42)420-50421-507.36 (187)7.05(179)420-187421-1872.44 (62)2.13 (54)420-62421-627.87 (200)7.56(192)420-200421-200Center crossbar - developed for applicationsinvolving a very large number of thin cables,individually separated. This offers the option ofsubdividing the Energy Chain into upper andlower halves, with mutually independentseparators.Rollclip - minimizes abrasion of particularlysensitive hoses or cables in an Energy Chain .The integrated rollers compensate for relativemovement between thechain and the hose or cable.This reduces the abrasion ofthe hoses or cables271.06(27).08 (2).47(12)Center crossbarRollclipUnassembled Part No. 405Unassembled Part No. 489-27AssembledPart No. 415.35(9)Assembled421-75.18(4.5)Roller separator - performs a similar functionto the Rollclip, but doubles as a separator. Consult igus if you have any questions regardingthe roller separator.35 (9)Center crossbarPart No. 490-27.71(18)Unassembled Part No. 429AssembledPart No. 4306.204
1404014140R18840Energy Chain System E4 LightSeries 14040/14140/R18840Special Accessoriesenergy chain configuratorFor applications in which particularly high fill weights necessitate extremely wide Energy Chains The extension link design allows virtually limitless side-by-side attachment of chainsThe unsupported length of a chain can be increased when additional loads are requiredExtension links can be used with Energy Chains , Energy Tubes or a combination of bothThey are suitable for unsupported and gliding applications in a guide troughEnergy Chains with extension links are attached with KMA or steel mounting brackets.We strongly recommendon-site consultation with anigus technician for individualadvice regarding mountingbrackets, guide troughs andother design details.Bi 1 .75 (19)Bi 2 .63 (16)(1)Bi 3ø.35(9)14040-Bi1/Bi2/Bi3- R -0Bi 23.13(79.5) .04Bi 1.35(9)Telephone 1-800-521-2747Fax1-401-438-7270Part number example forEnergy Chain 14040-10/20/10- 200 -0.88(22.5) .79(20)igus Energy ChainSystem Extension links - for extremely wide Energy Chains up to 9.84 ft (3m)Bi 3 .75 (19)Bi 1 .75 (19) Bi 2 .63 (16) Bi 3 .75 (19) .12 (3)[Bi 1 .75 (19) Bi 2 .63 (16) Bi 3 .75 (19)] .71 (18) .12 (3)Extender crossbars - For careful guiding of large diameter cables and hoses Intended for cables and hoses with a maximum outer diameter of 9.64 in. (245 mm).Can be attached along either the inner or outer radius, inner radius preferredGliding operation with crossbars assembled along the outer radius in conjunction with a special guidetroughGliding operation not guaranteed with crossbars assembled along the inner radiusThe extender crossbar can either be attached to the side links directly or can be used incombination with two standard snap-open crossbars.Internet: http://www.igus.comemail: sales@igus.comQuickSpec: http://www.igus.com/quickspecConsult igus for your6.205extender crossbarapplications. We will behappy to assist you withyour design layout.Square extender crossbarcombined with standard snapopen crossbars.Part No.Attached directly tothe side link.Round extender crossbarcombined with standard snapopen crossbars.Attached directly tothe side link.Max ØHoseStyleInstallationSide Link450-15-RHD115By requestRoundYesNo450-17-RD115By requestRoundNoYes450-25-D150By requestSquareYesNo450-30-D200By requestSquareYesNo450-35-D250By requestSquareYesNo450-40-D300By requestSquareYesNo450-20-HD150By requestSquareNoYes450-25-HD200By requestSquareNoYes450-30-HD250By requestSquareNoYesE4 clip on cable binder For side mounted applicationsServes as a clip-on, lateral guide forhoses and cables on Energy Chains The loops can be adjusted as neededPart No. Combined withSnap-Open CrossbarsCompatible with many E4 Energy Chains EconomicalOne clip and one locking band areneeded for each chain linkForm450-B12Locking clip, comprised of a locking element450-B12-200Locking band, comprised of a locking element and band; 12 x 1.5 x 200 mm
Energy Chain System E4 LightSeries 14040/14140/R18840Mounting Brackets - KMA energy chain configuratorMoving end141400.1Standard45 Option 1: KMA pivotingProfile rail optionUniversal useCorrosion resistantShort and long travelsSpace-restricted conditions45 Fixed end141400.2Standard positionfor profile railFixed end140400.24.92 (125)Bi 1.14 (29)Bi - .28 (7)Complete SetBi .47 (12)With Profile RailTube version1.77 (45)4.92 (125)Bi - .28 (7)Bi 1.14 (29)140400- 07- 12 T PBi .47 (12)Part Number StructureBi .47 (12)Profile rail optionUniversal useCorrosion resistantExtreme accelerationsVertical hanging/standing travelsWidth.79(20)140400 Locking141400 PivotingFull set, for both ends:140400- 05- 12 Full set, each part with pin/bore.79(20)ø.33 (8.5)t .41 (11.2).79(20).79(20)Single-part order:140400- 05- 1 Mounting bracket with bore140400- 05- 2 Mounting bracket with pinPart number examples are shown for pivoting brackets. For locking brackets change part number to 140400Part No. Full Set (pivoting)with profile railSeries 14040 or 14140141400-Width-12PPart No. Full Set (pivoting)Series 14040 or 14140:141400-Width-12Width Part No. Full SetLocking PPPBiin. (mm)1.97 (50)2.56 (65)2.95 (75)3.43 (87)3.94 (100)4.41 (112)4.92 (125)5.39 (137)5.91 (150)6.38 (162)6.89 (175)7.36 (187)7.87 (200)8.35 (212)8.86 (225)9.33 (237)9.84 (250)10.31 (262)10.83 (275)11.30 (287)11.81 (300)Part No. Full Set (pivoting)Tube Series R18840141400-Width-12TPart No. Full Set (pivoting)with Profile RailSeries R18840141400-Width-12TPWidth Part No. Full SetLocking DF: www.igus.com/e-chain-pdfsSpecs/CAD/RFQ: www.igus.com/e-chainsRoHS info: www.igus.com/RoHS45 Moving end140400.1Option 2: KMA locking Standard positionfor profile rail45 Bi 1404014140R18840Biin. (mm)12.28 (312)12.79 (325)13.27 (337)13.78 (350)14.25 (362)14.76 (375)15.24 (387)15.75 (400)16.22 (412)16.73 (425)17.20 (437)17.72 (450)18.19 (462)18.70 (475)19.17 (487)19.69 (500)20.16 (512)20.67 (525)21.14 (537)21.65 (550)23.62 (600)6.206
Chainfix clamps forthe profile railEnergy Chain System E4 LightSeries 14040/14140/R18840Strain Reliefigus Chainfix strain relief elements are available in either steel or stainless steel. They can be adjustedwith a hexagon socket and are available in single, double and triple configurations.Part No. Single ClampSteelStainlessPart No. Double ClampSteelStainlessPart No. Triple ClampSteelStainlessCFX12-1CFX12-1ECFX12-2 CFX12-2ECFX12-3 –.24 - .47(06 - 12)CFX14-1CFX14-1ECFX14-2 CFX14-2ECFX14-3 –.47 - .55(12 - 14)CFX16-1CFX16-1ECFX16-2 CFX16-2ECFX16-3 –.55 - .63(14 - 16)CFX18-1CFX18-1ECFX18-2 CFX18-2ECFX18-3 –.63 - .71(16 - 18)CFX20-1CFX20-1ECFX20-2 CFX20-2ECFX20-3 –.71 - .79(18 - 20)CFX22-1CFX22-1ECFX22-2 CFX22-2ECFX22-3 –.79 - .87(20 - 22)CFX26-1CFX26-1ECFX26-2 CFX26-2E––.87 - 1.02(22 - 26)CFX30-1CFX30-1ECFX30-2 CFX30-2E––1.02 - 1.18 (26 - 30)CFX34-1CFX34-1ECFX34-2 CFX34-2E––1.18 - 1.34 (30 - 34)CFX38-1CFX38-1E––––1.34 - 1.50 (34 - 38)CFX42-1CFX42-1E––––Chainfix Clip1.50 - 1.65 (38 - 42)Modular snap-on strain relief deviceChainfix clip is available for cable diameters rangingTiewrap PlatesCable øin.(mm)Part No.ClampPart No.Bottomfrom .16” (4mm) to .94” (24 mm). It is suitable for as-.16-.31(04-08)CFC-08-M CFC-08-Csembly on KMA mounting brackets, clip-on strain relief.31-.47(08-12)CFC-12-M CFC-12-Cfor crossbars as well as profile rails. Quick assembly.47-.63(12-16)CFC-16-M CFC-16-Cwithout the use of tools. For more information please.63-.79(16-20)CFC-20-M CFC-20-Crefer to strain relief section of Chapter 10.79-.94(20-24)CFC-24-M CFC-24-COption 1:Tiewrap plates as an individual partAvailable as an individual component, can be fixed onto a mounting bracket with the use of a profile rail.C3050-ZB51.97 (50)1.18 (30)no3075-ZB72.95 (75)2.16 (55)no3100-ZB103.94 (100)3.15 (80)no3115-ZB114.53 (115)3.74 (95)noB1.10(28).08(2).24(6)1.38 (35)ShownassembledSingletiewrapplate3125-ZB124.92 (125)4.13 (105)no3150-ZB155.91 (150)5.12 (130)no3175-ZB176.89 (175)6.10 (155)no3200-ZB207.87 (200)7.09 (180)yes3225-ZB228.86 (225)8.07 (205)yes3250-ZB259.84 (250)9.06 (230)yesOption 2:Clip-on Tiewrap platesAvailable as a clip-on tiewrap plate without theuse of bolts They are inserted and removed witha screwdriver used as a lever. Clip-on tiewrapplates are also available as an attachment to theopening crossbars.Part No.47 (12).71 (18)1.73 (44)CenterBore.08(2)BBore Widthin. (mm)90 COverall Widthin. (mm).47 (12)nNumberof Teeth.31(8).08 (2).31 (8)Internet: http://www.igus.comemail: sales@igus.comQuickSpec: http://www.igus.com/quickspecCable øin.(mm)For more information please refer to strain relief section of Chapter 10TiewrapPlate6.207energy chain configurator.24 (6.2)Telephone 1-800-521-2747Fax1-401-438-7270igus Energy ChainSystem 1404014140R18840(n-1) x .39 (10)If used with KMA brackets with profilerail please add “KMA” to the end ofthe part number.Example: 3050-ZBKMAFor more information please refer tostrain relief section of Chapter 10Numberof TeethWidth of Strain Reliefin.(mm)3050-ZC51.97(50)3075-ZC72.95(75)For more information please refer to strain reliefsection of Chapter 10Option 3:Clip-on Tiewrap plates for openingcrossbarsPart No.Clip-on tiewrap plates are also available as anattachment to opening crossbars. They can bepositioned at any point along the Energy Chain .4575-ZS72.91(74)For more information please refer to strain reliefsection of Chapter 104550-ZSNumberof Teeth5Width of Strain Reliefin.(mm)1.89(48)
energy chain configuratorGuide troughs are used with applications wherethe upper run of the Energy Chain glides on thelower run. If using igus steel guide troughs, thefollowing components are required:Width of Crossbar14040-05-200-0BRi3.19 (81)*-063.78 (96)*-074.17 (106)94-50-225-105.16 (131)94-50-250-115.63 (143)94-50-275-126.14 (156)94-50-275-136.61 (168)94-50-300-157.13 (181)94-50-300-167.60 (193)94-50-325-178.11 (206)94-50-325-188.58 (218)94-50-350-209.09 (231)94-50-350-219.57 (243)94-50-375-22 10.08 (256)94-50-375-23 10.55 (268)94-50-400-25 11.06 (281)94-50-400-26 11.54 (293)94-50-425-27 12.05 (306)94-50-425-28 12.52 (318)94-50-450-30 13.03 (331)94-50-450-31 13.50 (343)94-50-475Required guide troughs164 ft (50 m) guide trough82 ft (25 m) glide bars 13 sections of 6.56 ft (2 m) glide bars.XX indicates the length of the profile rails onwhich the guide trough is mounted. The valuesand part numbers are specified in the table onthe left. The standard length of the trough components and glide bars is 6.56 ft (2 m). The required overall length of the guide trough directlycorrelates to the length of travel.Part No. 93-01Required number of installation sets: Number of guide trough components 1 25 1 26Part number of the installation sets94-50-XXXExample:94-50-400 for 15.75 (400 mm) long profile rail 25 sections of 6.56 ft (2 m) guide troughPart No. 94-30Installation sets as section connectorsBRaBRi Ba .20 (5).79 (20)-32 14.02 (356)94-50-475Ba-33 14.49 (368)94-50-500Bi-35 15.00 (381)94-50-500-36 15.47 (393)94-50-525-37 15.98 (406)94-50-525-38 16.46 (418)94-50-550-40 16.97 (431)94-50-550-41 17.44 (443)94-50-575-42 17.95 (456)94-50-575-43 18.43 (468)94-50-600-45 18.94 (481)94-50-60094-50-625-47 19.92 (506)94-50-625-48 20.59 (518)94-50-650-50 20.91 (531)94-50-650-51 21.38 (543)94-50-675-52 21.89 (556)94-50-675-53 22.36 (568)94-50-700-55 22.87 (581)94-50-700-60 24.84 (631)94-50-750Guide troughHRi .04 (2) haGlide bars.04 (2)Installation set“Basic”Profile rail.16 (4)3.31 (84)1.18(30)FL 40 x 41.50 (38).94 (24).83(21)-46 19.41 (493)Left: Guide troughwith glide barsRight: Guide troughswithout glide bars* Specialized guidetrough availableupon requestha-05Example:Length of travel 164 ft (50 m)Center mountedl Full travel length of guide troughPart No. 94-30l 1/2 travel length glide barsPart No. 93-01l Installation sets as end connectorsPart No. 94-50-XXHRa 6.69 (170)InstallationPart No.1404014140R18840PDF: www.igus.com/e-chain-pdfsSpecs/CAD/RFQ: www.igus.com/e-chainsRoHS info: www.igus.com/RoHSEnergy Chain System E4 LightSeries 14040/14140/R18840Guide TroughIndividual attachmentwithout profile rail.79(20).43 (11)ø.43 (11)1.97 (50)Length from adjacent tablefor example 94-50-300Standard length profile rail6.208
Energy Chain System E4 LightSelection GuideRugged stopdogigumid G-40/ 248 FCan be openedfrom both sidesenergy chain configuratorLateral glidesurfacesE4/light version with the approvedE4/4 Series undercut designl Lightweightl Optimized ratio of interior and exterior dimensionl Cost-effectivel Numerous interior separation possibilitiesl Wide range of modular accessoriesl Narrow outer linksl Maximum stability in the ig
14040 14140 R18840 6. 201 I n t e r n e t: h t t p: / / w w w. i g u s. c om e m a i l: s a l e s @ i g u s. c om Q u i c k S p
rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 14040 was prepared by Technical Committee ISO/TC 207, Environmental management, Subcommittee SC 5, Life cycle assessment. This second edition of ISO 14040, together with ISO 14044:2006, cancels and replaces ISO 14040:1997,
Circular Chain (Curved Chain) 63 Double Pitch Conveyor Chain C2040 to C2160H C2042 to C2162H 64 ANSI Roller Chain with Attachment 25 to 160 65 Double Pitch Roller Chain with Attachment 66 ANSI Roller Chain with Extend Pin 35 to 120 67 Double Pitch Roller Chain with Extend Pin C2040 to C2102H 68 ANSI Roller Chain with Wide Contour Attachment 69 D
DEFINITION. The bi-chain condition holds in L if every bi-chain of CX terminates. We note that the bi-chain condition is self-dual. Moreover, f[An,in-)pn} is a bi-chain ofdl, Im (in) is a descending chain and Ker(pn) is an ascending chain. Hence the bi-chain condition holds in L if the ascending and descending chain conditions both hold.
for a product throughout its life cycle" (ISO 14040:2006, section 3.3) Life Cycle Impact Assessment (LCIA) "Phase of life cycle assessment aimed at understanding and evaluating the magnitude and significance of the potential environmental impacts for a product system throughout the life cycle of the product" (ISO 14040:2006, section 3.4)
Life Cycle Assessment, as defined by the ISO 14040 and ISO 14044 is the compiling and evaluation of the inputs and outputs and the potential environmental impacts of a product system during a product's lifetime ISO 14040 introduction in LCA, definition and background ISO 14044 describes the procedure of .
WCAP-14040-A May 2004 5461.doc-061004 Revision 4 LEGAL NOTICE “This report was prepared by Westinghouse as an account of work sponsored by the Westinghouse Owners Group (WOG). Neither the WOG, any member of the WOG, West
Life Cycle Stages of a Product D.T. Allen, University of Texas - Austin . analysis » ISO 14042: Life cycle impact assessment » ISO 14043: Life cycle interpretation. 6 11 ISO 14040 Principles and framework ISO 14040 » Key features of the LCA methodology - Scope must be from cradle to grave for products
ASTM D823 Method of producing films of uniform thickness of paint, varnish, lacquer and related products on test panels. ASTM D1141 Specification for Substitute Ocean Water. ASTM D1650 Method of sampling and testing shellac varnish. ASTM G8 Test method for cathodic disbonding of pipeline coatings.
