Catalog PowrFlow Directional Control Valves
CatalogPowrFlowDirectional Control ValvesTMPrecision directional controlfor any hydraulic system.
What Makes PowrFlow DirectionalControl Valves Your Best Buy?Value. PowrFlow Directional ControlValves are built to work harder, and lastlonger. They’re 100% tested, and come withan exclusive 3 year warranty against defectsin material and workmanship.zzzzz5000 PSI Rated3000 PSI Tank Port RatingFlow Rates to 20 GPMViton Seals Standard12 Interchangeable Spool OptionsFor long term reliability, and optimumperformance, PowrFlow Directional ControlValves are your best value.PowrFlow Directional Control ValvesVSD03M SeriesPrecision Directional Control for AnyHydraulic SystemPowrFlow Directional Control valves are used in awide variety of applications. They are available in DINstyles, and are CE and CSA approved. The standardmounting conforms to NFPA, ANSI and ISO standards.Use PowrFlow Directional control Valves For:z Machine Tool Indexingz Feeding and Motion Control Devicesz Mobile and Staionary Lift Equipmentz Tipping Equipmentz Compactorsz Wood Product Handling Equipmentz Concrete and Block Work Moversz Off Highway Equipmentz Food Processing Machineryz And More
INDEXDIRECTIONAL CONTROL VALVESMODEL SERIESVSD03MVS5M Anti-ShockVS12MVS12M VC12MOPERATEDSOLENOID ACTUATED, DIRECT OPERATEDSOLENOID ACTUATED, DIRECT OPERATEDSOLENOID ACTUATED, DIRECT OPERATEDSOLENOID ACTUATED, DIRECT OPERATEDSOLENOID ACTUATED, PILOT OPERATEDSOLENOID ACTUATED, PILOT OPERATEDLEVER ACTUATED, MANUALLY OPERATEDLEVER ACTUATED, MANUALLY OPERATEDAIR ACTUATED, DIRECT OPERATEDAIR ACTUATED, DIRECT OPERATEDAIR ACTUATED, PILOT OPERATEDCAM ACTUATED, DIRECT OPERATEDSIZE 3D05/05D03/03D05/05D08/08D05/05PAGE NO.4 - 1112 - 1617 - 2122 - 2526 - 3233 - 3738 - 4344 - 4748 - 5354 - 5758 - 6263 - 65SIZE -NFPA/ISOD03/03D05/05D08/08D08/08PAGE NO.66 - 7066 - 7066 - 7066 - 70OPERATEDSOLENOID ACTUATED, DIRECT OPERATEDSIZE -NFPA/ISOD03/03PAGE NO.71 - 75OPERATEDSOLENOID ACTUATED, PILOT OPERATEDSIZE -NFPA/ISOD08/08PAGE NO.76 - 81HAZARDOUS DUTY DIRECTIONAL CONTROL VALVESMODEL SERIESVS5MVS12MVS50MDVS50MOPERATEDSOLENOID ACTUATED, DIRECT OPERATEDSOLENOID ACTUATED, DIRECT OPERATEDSOLENOID ACTUATED, PILOT OPERATEDSOLENOID ACTUATED, PILOT OPERATEDHAZARDOUS DUTY DIRECTIONAL CONTROL VALVESWITH EXPLOSION-PROOF SOLENOIDSMODEL SERIESVSDO3MDeACCELATROL VALVEMODEL SERIESDVS50MENERGY ISOLATION VALVEMODEL SERIESVS100LOPERATEDSOLENOID ACTUATED, PILOT OPERATEDPAGE NO.82- 85VALVE ACCESSORIESDESCRIPTIONMECHANICAL ACCESSORIES -- FOR PILOTED DIRECTIONAL CONTROL VALVESELECTRICAL ACCESSORIES -- FOR PILOTED DIRECTIONAL CONTROL VALVESELECTRICAL ACCESSORIES -- FOR VSD03M and VSDO8M VALVESPILOT OR DRAIN CONVERSION -- FOR PILOTED DIRECTIONAL CONTROL VALVESPAGE NO.86- 8788- 899091MOUNTING SURFACESDESCRIPTIONDO5 and D05DO8 and D10VALVE BOLT KITSPAGE NO.9293941
TERMINOLOGY ANDGENERAL SPECIFICATIONSFEATURESSOLENOID ACTUATED CSA certified (D03, D05, D08 sizes). CE approved (D03, D05, D0 8 and D10 sizes). Wet armature solenoids:— 2-pin plug-in coils or DIN (D03, D05, D10 sizes).— Lead wires or DIN connectors (D05).— Solenoid failures greatly reduced.— Standard and low amp coils available.— High temperature elements are isolated fromdirect human contact.— No oil leakage into electrical cavity.— Fast and easy solenoid replacement.— Continuous duty-rated coils. No dynamic seals eliminate external oil leakages. Electrical quick disconnects as factory installedor field installed options. 3- and 5-pin sealed connectors per ANSIrecommended standard B93.55M-1981. Built-in lights, terminals and surge suppressor(D03, D08, D10 sizes). Large wiring cavity options for wire to wireconnections. (D05) Access to mounting bolts without enteringelectrical box. Mounting bolt heads are below spool centerlineto prevent body distortion and spool stick.CAM ACTUATED VC12M cam follower may be positionedperpendicular or parallel to mounting surface. Bronze bearing push-rod for increased life. Urethane wiper eliminates contaminationfrom actuator. Internal actuator paarts are electro-filmed to resistcorrosion.2LEVER ACTUATED Lever boot keeps contaminants from linkage. Lever connects directly to spool for positive hold. Detent option for positive hold. Internal actuator parts are electro-filmed toresist corrosion.AIR ACTUATED Wide operating range of air pilot pressure. Urethane sealing gland on air piston permits verylow air flow rates. Excellent control of spool shift rate. Air operator internal parts are electro-filmed toresist corrosion.GENERAL SPECIFICATIONSRECOMMENDED FLUID Petroleum. Water-based fluids (not more than 40% water). Most phosphate esters. Other fluids are acceptable, but special O-rings maybe required. Viton seals are standard.
TERMINOLOGY ANDGENERAL SPECIFICATIONSFLUID TEMPERATURE RANGEFluid temperature up to 200 F. will not appreciablyaffect valve performance, however, from a safetystandpoint, temperatures above 130 F. arenot recommended.RECOMMENDED OPERATING VISCOSITY80 to 350 SUS.FLUID OPERATING VISCOSITYAcceptable start-up viscosity to 1500 SUS. Minimumviscosity to 30 SUS.FILTRATIONISO 18/16/13.MOUNTING POSITIONOptional; horizontal preferred.NFPA FLOW PATH/ACTUATING PATTERNSOLENOID, AIR AND OIL ACTUATED:Actuating operator (a) — connects flow to cylinderport A.Actuating operator (b) — connects flow to cylinderport B.CAM ACTUATED:Activated — connects flow to cylinder port B.Released — connects flow to cylinder port A.LEVER ACTUATED:Push— connects flow to cylinder port A.Pull — connects flow to cylinder port B.GENERAL INFORMATIONVALVE OPERATIONSpring centered and spring offset valve types will bespring positioned unless actuated continuously.Detented, no spring valves may be actuatedmomentarily. When the operator is deactuated, thespool will remain shifted provided there is no severeshock, vibration, or pressure transients.PRESSURE SURGESPressure surges in a common tank line serving theseand other valves can be large enough to causeinadvertent shifting of these valves. This is particularlycritical in no-spring detented type valves. Separatetank lines may be necessary. Maximum pressurerating on solenoid operated valve tank ports includessurges.SILTINGAny sliding spool valve, if held shifted under pressurefor long periods of time, may stick and not springreturn due to fluid residue formation. The valveshould be cycled periodically to prevent this fromhappening.RESPONSE TIMEResponse times of air actuated valves are dependenton air flow rate and pressure supplied to the operator.Response times of hydraulic actuated valves will varywith pilot line diameter and length, pilot pressure, pilotcontrol valve shift time, pilot oil flow rate, andfluid viscosity.NOTE:The NFPA flow path/actuating pattern is reversed forSpools Code L.3
VSD03MDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDNFPA SIZE D03TYPICAL PERFORMANCESPECIFICATIONSPerformance is measured on a four-way circuit (fullcircuit). Performance may be reduced from thatshown if a three-way circuit (half circuit) is used, i.e. Aor B port plugged.DESCRIPTIONAs a valve spool shifts, the spool lands cross over thevalve body ports. This can produce instantaneoushigh flow rates.MAXIMUM FLOW RATE - (up to)20 gpm76 lpmMAXIMUMOPERATINGPRESSUREP, A, B Ports*T Port5000 psi3000 psi345 bar207 barMAXIMUMCYCLE RATEAC SolenoidsDC SolenoidsMOUNTINGSURFACEWEIGHTup to 400 cpmup to 300 cpmANSI/B93.7M - 1986 D03ISO 4401 Size 03Single ActuatorDouble ActuatorSPOOL CODES AVAILABLE3.2 lbs.3.9 lbs.1.45 kg1.77 kgSEE CHART* 2000 psi (138 bar) maximum on valves with solenoid codes 37 and 68.All pressure drops shown on this page are based on100 SUS fluid viscosity, and 0.87 specific gravity.See the chart below for other viscosities.FluidCS 14.5 20.5 324354657686Viscosities SUS 75 100 150 200 250 300 350 400Multiplier0.93 1.00 1.11 1.19 1.26 1.32 1.37 1.41For any other specific gravity (G1) the pressure drop(?P) will be approximately ?P1 ?P (G1/G).4
VSD03MDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDTYPICAL PRESSURE DROP111601096 5842317PRESSURE DROP (psid)120S80400012345678910 11FLOW (gpm)121314151617181920FLOW PATH ?P CURVESSPOOLTYPEAACode1&2BBCode1&2EFFCode 68F1GHJKLNQSubplateP to AFLOW CURVE NUMBERSPOOL SHIFTEDSPOOL CENTEREDB to TP to BA to T P to A or B A or B to T P to /A9N/A545252756S (Full Circuit)5
VSD03MDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDSPOOL DESCRIPTIONCODE6SYMBOLSPOOL FUNCTIONCENTER POSITION CROSSOVERAAll ports blockedAll ports blockedBAll ports openAll ports openEP & A blockedB to TAll ports blocked,or P & A blockedB to TFP blockedA & B to TP blockedA or B to TF1P blockedA & B restrictedto TGP to A & BT blockedP blockedA or B restrictedto TP to A or BT & A or BblockedHP to A & TB blockedJP to BA & T blockedKP & B blockedA to TLP to TA & B blockedAll ports open,restrictedNP to AB & T blockedAll ports blocked,or P to A,B & T blockedQP to B & TA blockedAll ports openAll ports openAll ports blocked,or P to B,A & T blockedAll ports blocked,or P & B blocked,A to T
VSD03MDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDMAXIMUM FLOWALL SOLENOIDS EXCEPT CODE 39 AND 68FUNCTIONABFF1GLE-KJ&NH&QCODEAC DC AC DC AC DC AC DC AC DC AC DC AC DC AC DC AC DC1(lpm) (70 bar)@gpm1000 psi23, 51(lpm) (138 bar)@gpm2000 psi23, 51(lpm) (207 bar)@gpm3000 psi23, 51(lpm) (276 bar)@gpm4000 psi23, 51(lpm) (345 bar)@gpm5000 psi23, 7N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/AN/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A(49) (57) (49) (57) (72) (72) (38) (45) (49) (49) (57) (53) (19) (23)13 15 13 15 19 19 10 12 13 13 15 1456N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/AN/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A(49) (57) (49) (57) (72) (72) (38) (45) (49) (49) (57) (45) (15) (23)13 15 13 15 19 19 10 12 13 13 15 1246N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/AN/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A(45) (45) (45) (38) (72) (72) (38) (45) (45) (42) (53) (45) (11) (15)11* 12 11* 10 19 19 10 12 12 11 14 1234N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/AN/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A(15)(15)(72) (72) (19) (38) (30) (30) (53) (45) (11) (11)N/AN/A4†4†19 195108814 1233N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/AN/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/AN/A N/A N/A N/ANOTE: Test voltage was 90% of rated voltage unless specified otherwise.Performance is measured on a four-way curcuit (full circuit). Performancemay be reduced from that shown if a three-way circuit (half circuit) is used,i.e. A or B port plugged.N/A Not available in this configuration.* 100% rated voltage required.† 3500 psi maximum and 100% voltage required.MAXIMUM FLOWSOLENOID CODES 39 AND 68 ONLYFUNCTIONCODE1(lpm) (34 bar)@gpm500 psi23, 51(lpm) (69 bar)@gpm1000 psi23, 51(lpm) (103 bar)@gpm1500 psi23, 51(lpm) (138 bar)@gpm2000 psi(72) (72) (15) (19) (15) (15) (53) (45) (7.6) (11)19 19454414 122323, N/AN/AN/A(15)4(19)5(19)57
VSD03MDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDTYPICAL ELECTRICAL CHARACTERISTICSVOLTAGE & VOLTAGEFREQUENCYLIMITSSOLENOIDCODE33L, 60L34L, 61L39L, 68L42L, 70L44L, 75LVOLTS - Hz.MIN. - MAX.120 - 60110 - 50240 - 60220 - 50120 - 60110 - 5024 DC12 DC108 - 12699 - 116216 - 252198 - 231108 - 13299 - 12121 - 2610 - NGCURRENTMIN. 024242.101.101.101.002.00WRENCH ACCESS TO MOUNTINGBOLTS THRU TOP OF VALVE ASSY.TYP ALL ASSY'SNFPA D03 SIZE(Formerly D01)P,A,BTWATTS4.14 (F)A SOL ASSYB SOL ASSY3.142.061.031.70 AC2.31 DCFOR COILREMOVALCLEARANCE#10-24 UNC X 1.00"SOCKET HEAD CAPSCREW 4-5 LBS-FTTORQUE3.00 (F) REF2.51 AC SOLENOIDS3.11 DC SOLENOIDS.922.51 AC SOLENOIDS3.11 DC SOLENOIDS8.01 AC SOLENOIDS9.22 DC R PINBOTH ENDS
VSD03MDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDDIN CONNECTIONS#10-24 UNC X 1.00"SOC. HD. CAP SCREW4-5 LBS-FT TORQUE1.60 AC SOLENOID1.82 DC SOLENOID3.703.35.65 (F) TYP.2.51 AC SOLENOID3.11 DC SOLENOID1.84.38 (F) TYP.3.00 REF.2.51 AC SOLENOID3.11 DC SOLENOID8.01 AC SOLENOID9.22 DC SOLENOID24-26 LBS-FTTORQUECORE 15 LBS-FTMAX.TORQUE.65 (F) TYP.38 (F) TYP.26 REF.3.00 REF.5.51 AC SOLENOID6.11 DC SOLENOID5.77 AC SOLENOID6.37 DC SOLENOID9
VSD03MDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDORDERING INFORMATIONSELECTONESELECTONESELECTIF REQ’DVSD03MSELECTIF REQ’DSELECTONEDESIGNLETTERADDIF REQ’DAPILOTGSPOOLSFUNCTIONCODEA B1P TSingle operator 2 positionSpring offsetbELECTRICAL OPTIONSCODECODEREFER TOPAGE 6FOR SPOOLAVAILABILITYOMITOPTIONbBA B2B3A*†P TSEALSDouble operator 2 positionDetented (No spring)A Bba3*P TCODEVITONSEALSSTANDARDB3H*†Double operator 3 positionSpring centeredb5*A BP TSingle operator 2 positionSpring centeredbA B6B4A**MECHANICAL OPTIONSCODE DESCRIPTIONOMITP TSingle operator 2 positionSpring offsetR* Operator identification reversed on“L” spool: VSD03M-3L: “A” solenoid on “A”port end, “B” solenoid on “B” portend. VSD03M-5L: “A” solenoid on “A”port end. VSD03M-5L-R: “B” solenoid on“B” port end.MVZ*WD*SINGLESOLENOID“A” PORT ENDSINGLESOLENOID“B” PORT ENDRIVETMOUNTINGSTEELOVERRIDE PINMANUALOVERRIDE FORSINGLESOLENOID VALVEWASHDOWNB4**B5A*Available with single solenoidvalves only.B5H*TYPICAL ORDERING ONDIN STYLESOLENOIDSTOP ELECT. CONN.BOX W/TERMINALPOSTS, LIGHTSAND SURGESUPPRESSORTOP ELECT. CONN.BOX W/3 PIN MALEMINI RECEPTACLE,LIGHTS & SURGESUPRESSORCONNECTOR ON“A” PORT ENDTOP ELECT. CONN.BOX W/3 PIN MALEMINI RECEPTACLE,LIGHTS & SURGESUPRESSORCONNECTOR ON“B” PORT ENDTOP ELECT. CONN.BOXW/4 PIN MALEMICRORECEPTACLE,LIGHTS & SURGESUPRESSORCONNECTOR ON“A” PORT ENDTOP ELECT. CONN.BOXW/4 PIN MALEMICRORECEPTACLE,LIGHTS & SURGESUPRESSORCONNECTOR ON“B” PORT ENDTOP ELECT. CONN.BOX W/5 PIN MALEMINI RECEPTACLE,LIGHTS & SURGESUPRESSORCONNECTOR ON“A” PORT ENDTOP ELECT. CONN.BOX W/5 PIN MALEMINI RECEPTACLE,LIGHTS & SURGESUPRESSORCONNECTOR ON“B” PORT ENDHAZARDOUS DUTYTOP ELECT. CONN.BOX CLASS IIGROUPS E, F, & GSOLENOID MFG.CODE DESCRIPTIONLLISKSOLENOIDCODEVOLTAGEWITH DIN 43650ELECTRICAL CONNECTIONS333435394244120/110V60/50 Hz240/220 V60/50 Hz280/240 V60/50 Hz120/110V60/50 Hz(LOW FORCE)24 VDC12 VDCWITH 2 PIN CONNECTIONS526061687075240/220V60/50 HzHAZARDOUSLOCATION120/110 V60/50 Hz240/220 V60/50 Hz120/110 V60/50 Hz(LOW AMP,LOW FORCE)24 VDC12 VDCNOTE: Solenoids not CSA approved.Connector conforms to ANSI/B93.55M - 1981.Available with DC solenoid valves only.Available with single solenoid valves only.
VSD03MDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDCOMPETITIVE CROSSOVER GUIDEThis Crossover Guide compares performance andspecifications of solenoid operated NFPA D03mounting directional control valves. The informationin this guide is the most recent available, either fromprinted catalogs, or the internet. Items with the “”N/A”notation have no available information from eithersource.SpecificationsModel SeriesMaximum PressureMaximum Tank PressureMaximum Tank Pressure - OptionTemperature Range (Degrees F.)Spools AvailableMaximum Flow Rate (gpm)Pressure Drop @ 10 gpmSolenoids AvailableElectrical ConnectionsAntishock / SoftshiftHazardous Duty LocationExplosion Proof LocationDrip Proof EnvironmentWeight - Single SolenoidWeight - Double Solenoid120 VAC / 60HzInrush AmperageHolding AmperageHolding WattageSolenoid Shift Time (ms)Spring Return Time (ms)Theoretical Cycling (Hz)Actual Cycling (Hz)24 VDCSolenoid Shift Time (ms)Spring Return Time (ms)Theoretical Cycling (Hz)Actual Cycling (Hz)Other CriteriaBuna-NVitonNeopreneEPRCSA ApprovedETL or UL ListedCE ApprovedIndicator Lights100% TestingLow Watt OptionSurge SuppressionContinentalVSD03M5000300030000 to 4640145023200 to 600150030000 to 0200030000 to 2290N/A41 to Rexroth4WE651002300N/A0 to 0030000 to 518.56.674.60.42N/A20 to 4520 to 804 to 0 to 2020 to 3010 to 1651.90.4925132015.1N/A1.80.423010 to 2015 to 408.3 to 222.20.4030183210N/A35307.7520 to 4520 to 804 to 12.5220 to 6010 to 604.2 to 16.60.546276.84.410 to 2020 to 3010 to 16532406.9N/A25 to 4510 to 257.1 to 1
VS5MANTI-SHOCKDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDTYPICAL PERFORMANCESPECIFICATIONSPerformance is measured on a four-way circuit (fullcircuit). Performance may be reduced from thatshown if a three-way circuit (half circuit) is used,i.e. A or B port plugged.NOMINAL FLOW RATE@ 3500 PSICSA CertifiedDESCRIPTIONAs the valve spool shifts, the spool lands cross overthe valve body ports. This can produce highinstantaneous flow rates. The anti-shock valveprovides a slow spool movement; slower than that ofa standard directional valve. This results in reductionor elimination of hydraulic system shock produced bythe spool movement and high flow rates.TYPICAL PRESSURE DROP CURVESbar1682257 P PRESSURE DROP6425310075215025lpm 012345102067830FLOWFLOW PATH ?P CURVESFLOW CURVE NUMBERSPOOLSPOOL SHIFTEDSPOOL CENTEREDTYPE P to A or B A or B to T A or B to T P to TA21N/AN/AA2C66N/AN/AB221N/A7F1218N/AL54N/A3124600 psi1500 psi315 bar105 barINTERNALLEAKAGE(1-port)3500 psi 100 SUS9 cipm23 cipm148 mlpm380 mlpmMAXIMUMCYCLERATE*Option S1Option S260 cpm50 cpmTIMINGSPOOLSHIFT*Option S1Option S260 cpm50 cpmSingle ActuatorDouble ActuatorSPOOL CODES AVAILABLEANSI/B93.7-1986 - D08ISO 4401 - SIZE 0831 LBS.32 lbs.14 kg14.5 kgA, A2C, B2,F1, L* Timingfor spool shift is dependent on fluid voscosity.4125gpm 0MAXIMUMP, A, B PortsOPERATINGT Port (includes surges)PRESSUREWEIGHT17519 lpmSEE CHART610 1508MAXIMUM FLOW RATEMOUNTING SURFACEpsi14 200125 gpmAll pressure drops shown on this data page arebased on 100 SUS fluid viscosity and 0.87 specificgravity. See the chart below for other viscosities.FluidCS 14.5 20.5 324354657686Viscosities SUS 75 100 150 200 250 300 350 400Multiplier0.93 1.00 1.11 1.19 1.26 1.32 1.37 1.41For any other specific gravity (G1) the pressure drop(?P) will be approximaately ?P1 ?P (G1/G).
VS5MANTI-SHOCKDIRECTIONAL CONTROL VALVESSOLENOID ACTUATED, DIRECT OPERATEDSPOOL DESCRIPTIONCODESYMBOLSPOOL FUNCTIONCENTER POSITION CROSSOVERAA1CA2CAll ports blockedAll ports blockedB1B2All ports open,restri
vad03m air actuated, direct operated d03/03 48 - 53 va12m air actuated, direct operated d05/05 54 - 57 vad08m air actuated, pilot operated d08/08 58 - 62 vc12m cam actuated, direct operated d05/05 63 - 65 model series operated size -nfpa/iso page no. vs5m solenoid actuated, direct operated d03/03 66 - 70
Apr 18, 2018 · SERIES 700 PAGE Series 740: Bi-directional Knife Gate Valve 4 Series 745: Bi-directional Slurry Valve 4 Series 746: Bi-directional Slurry Valve 5 Series 752: Bi-directional Slurry Valve 5 Series 755: Bi-directional Slurry Valve 6 Series 760: Bi-directional Slurry Valve 6 Series 762: Bi-directional Slurry Valve 7 Series 765: Bi-directional Slurry Val
1. Control Valves for General Service 2. Control Valves for Severe Service, Including 'OMEGA' Trim Valve 3. Steam Let-down Control Valves 4. Anti-surge Valves 5. Control Valves with Butterfly, Ball, Segment Ball (V-Notch, Eccentric) 6. Control Choke Valves 7. Pressure Regulating Valves 8. Retrofit Kit(Trim, Actuator, Instruments) for Up-grade
4 Section Pages Argus Atomac Automax Deutsche Audco Durco McCANNA 3-Piece Ball Valves 6 - 9 One Piece Threaded Valves 9 Flanged Ball Valves 10 - 14 One-Piece Butt Weld Valves 15 Top Entry Valves 15 Butterfly Valves 16 Non-lubricated Plug Valves 17 - 19 Lined Valves and Accessories 20 - 24 Check Valves 25 Gate Valves 25 Rotary Contro
MANUAL VALVES PVC-U The PVC-U manual valves line consists of a comprehensive range of ball valves, butterfly valves, diaphragm valves, check valves, sediment strainers, air release valves, foot valves and angle seat valves for use in the construction of process and service lines fo
FC & FL valves, WKM type valves, Shaffer type valves, Flocon type valves, check valves, cup testers, pulsation dampeners: www.mcmoiltools.com o’Drill / mCm Centrifugal pumps, cyclone pump, skid packages, gate valves, shear relief valves, reset relief valves, float valves, butterfly valves, plug
1 subject page bronze gate valves 6-17 bronze globe valves 18-25 bronze swing check valves 26-29 engineering data 58-68 iron swing check valves 39-40 iron gate valves 31-36 iron globe valves 37-38 the wm.powell company—profile 2-3 terms and conditions 69-71 iron ul and fm gate valves 42-51 iron ul and fm check valves 52-55 figure number cross comparison table 57 bronze and iron valve index 4
Solenoid Controlled Pilot Operated Directional Valves "" Series Shockless Type Directional Valves Pilot / Manually / Mechanically Operated Directional Valves Maximum Flow 25 (3600) 336 . occurs when each port is blocked in transit. Pump can be unloaded and actuator is floating at neutral. If a 2-position type is used, shock is reduced as .
Pilot Operated Directional Valves Catalog DG3V-10 Hydraulic Pilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) DG5V-10 Solenoid Pilot Operated; 1100 l/min (290 USgpm) 350 bar (5000 psi) NFPA D10, ISO-4401-10, CETOP 10. 2 EATON Vickers Pilot Operated Directional Valves Catalog V-VLDI-MC004-E March 2007 . integral check valves and port .
