Fluke Process Tools Accessories - IC Master

Fluke Process ToolsAccessoriesTechnical DataPressure Pumps700PTP-1 PneumaticTest PumpUse Flukeaccessoriesto enhancethe powerof your FlukeProcessCalibratorsFluke 700PTP-1Description: The Fluke700PTP-1 pneumatic test pumpis capable of supplying pressures up to 600 psi, 40 bar.Application: For use with 700series pressure modules ortest gauges. Can directly connect modules or test gauges tothe reference port consolidating two separate pieces whenperforming pressure calibrationand testing. Can also be usedwith 717 pressure calibrators.Ideal for calibrating pressuretransmitters, pressure switchesand pressure gauges up to 600PSI/40 bar.Features: Pump can be easily cleanedwithout disassembly. The vernier can be used asa stand-alone low pressurecalibration source The Fluke 700PTP-1 hastwo pressure ports allowingsimultaneous connection: ¼ -NPT female fitting for thereference gauge or pressuremodule ¼” NPT female fitting for theunit under test Adjustable stroke length canbe set to limit the pressureper strokeIncluded: 1/4 in NPT male to 1/4 in BSPfemale 1 meter of hoseFluke 700HTP-1 (2) 1/8 in NPT male quickconnects 1/8 NPT female to 1/4 in BSPfemale Seal Kit Instruction sheetSize: L x W x D:220 x 122 x 89 mmWeight: 467 gWarranty: One yearMaterial: Wetted materials:aluminum, silicon, neoprene,stainless steel, Buna-NFluke 700HTP-1Hydraulic Test PumpDescription: The Fluke700HTP-1 is a hand operatedhydraulic pressure pumpdesigned to generate calibrationpressures up to 10,000 psi/690bar. Designed for use withFluke-700 series high pressuremodules such as the Fluke700P09, 700P29, 700P30 and700P31.Application: Ideal for calibration when connected to a Flukehigh pressure module via thereference port. The 700HTP-1uses distilled water or mineralbased hydraulic oil as a sourcefor calibration of high pressureinput devices such as pressuretransmitters or pressure gauges.Can also be used with Fluke 717pressure calibrators.Features: Variable size stroke adjustment, allows the user to varythe volume and pressure perstroke Integral pressure adjustmentvernier knob for fine pressureadjustment.

Pressure Pumps(continued) Direct connection to pres- sure modules consolidatestwo separate pieces into onewhen performing pressurecalibration and testingTwo ¼ inch NPT pressureports, one for reference(pressure module or gauge),one for UUTCompatible with optionalFluke-700PRV pressure relief valve designed to protectpressure modules from overpressure damageNote: The user must provide a hose withappropriate end fittings to apply pressure fromthe UUT port to the calibration unit under testsuch as the Fluke-700HTH-1 hose kit.Included: ¼ inch NPT to ¼ inch NPTadapter to connect the reference gauge port on the pumpbody to the 1/4 NPT femalefitting on Fluke 700P29, P30,and P31 pressure modules. (2) ¼ inch NPT male to ¼inch BSP Female adapters ¼ inch NPT Tee (installed) Instruction sheetMechanical & GeneralSpecificationsSize: L x W x D:241 x 155 x 66 mmWeight: 580 gWarranty: One yearMaterial: Wetted materials: 303stainless steel, aluminum,polyurethane, PTFE, nitrile,and nylon29 Pressure ModulesFluke offers a family of 29Pressure Modules to address gage,differential, absolute, vacuum,and dual (compound) applicationsto 10,000 psi/700 bar.For detailed specificationsand applications, ask forApplication Note PressureCalibration Pub ID: 10188. Fluke Corporation Process Tools AccessoriesFluke 700HTH-1Fluke 700LTP-1Fluke 700PRV-1Pressure Relief Valve KitFluke 700HTH-1Hydraulic Test HoseDescription: The Fluke700PRV-1 consists of a reliefvalve settable from 725 to 5800PSI (50 to 200 bar) to be usedwith the 700HTP-1 HydraulicTest Pump. The 1/8” NPT malethread to fits directly into theFluke 700HTP-1 pressure pump.Application: To be used withthe 700HTP-1 Hydraulic TestPump. The 700PRV uses amulti-turn adjustment screwto set preload on internal discsprings. This relief valve willprotect the most commonlyused Fluke pressure modulesand pressure instruments fromdamage due to accidental overpressurization.Features: Adjustable from 725 to 5800PSI (50 to 200 bar) Preset at 2,900 psi/200 bar) Repeatability to 10% ofnominal setting. Installs directly into the700HTP-1 pumpIncluded: One adjustable relief valve Instruction sheetMechanical & GeneralSpecificationsSize: 38 mm by 16 mm diameterWeight: 46 gWarranty: One yearMaterial: Type 303 stainlesssteelDescription: The Fluke700HTH-1 hydraulic test hose isa 10,000 psi, 690 bar workingpressure test hose that featuresstainless steel and nylon construction for use in connectinga Fluke-700HTP-1 or other hydraulic test pump to a unit undertest.Application: The Fluke700HTH-1 enables connectionto both a Fluke pressure moduleand a calibration unit under testfrom a Fluke 700HTP-1 hydraulic test pump simultaneously.700HTH-1 is compatible withwater and non-corrosive oil.Features: Hose and fittings to connectdirectly to the Fluke 700HTP-1test pressure port Includes plugs and caps toeliminate fluid loss in hose,eliminates the need tore-prime the hose. Self-sealing fittings with easyfinger tight connections. Low volumetric expansion anda negligible pressure drop atrated pressuresIncluded: Hose with (2) 1/4" NPT femaleoutput connections (2) adapters that to convert ¼:NPT female to 1/4" NPT male(include sealing caps) 1/4 in NPT female to 1/4 inBSP male adapter Instruction sheet

Pressure and Calibration AccessoriesMechanical & GeneralSpecificationsMinimum bend radius:60 mmWorking temperature:- 40 ºC to 120 ºCMaterial: Nylon, stainless steel,zinc, plated steel, and nitrileDimensions: 0.84 m long without adapter fittingsWeight: 412 gWarranty: One yearOrdering 74Pneumatic test pump, -12 to 600 PSIFluke-700HTP-12811788Hydraulic test pump, 0-10,000 PSIFluke-700PRV-12811808Pressure relief valve for 700HTPFluke-700HTH-12811795Hydraulic test hose, 10,000 PSIFluke-700LTP-12811763Low pressure test pump, -12 to 100 PSIFeatures: Pump can be easily cleanedwithout disassembly.Description: The Fluke 700LTP- Adjustable pressure releasevalve with slow-bleed1 is a hand operated pressurecapabilitypump designed to generateeither vacuum to -13 psi/ -.90 Allows the slow releasebar or pressures to 100 psi/ 6.9pressure at a controlled ratebar. The Fluke 700LTP-1 has Slim design, easy to carrytwo pressure ports with quickandusefit connectors. Test hoses areterminated with 1/4-NPT female Quick fit connectors, one forthe reference port for connecfittings that can be adaptedtion to a Fluke 700 series presusing the BSP/ISO adapters.sure module and one to conApplication: For use with 700nect to a unit under testseries pressure modules and717 pressure calibrators. Idealfor low pressure applicationsrequiring accurate low pressuretesting.Fluke 700LTP-1Low-pressure Test PumpIncluded: (2) adapters to convert thereference and UUT port hosefitting to 1/4" BSP female Adapter to convert the reference port hose fitting to 1/4"NPT female for connection to700 series pressure modules One seal kit Instruction sheet in EnglishMechanical & GeneralSpecificationsSize: L x W x D:150 x 100 x 32 mmWeight: 226 g (pump only)Warranty: One yearMaterial: Aluminum, silicon,neoprene, stainless steel, Buna-NFluke 700ILF In-line FilterFor use with: Fluke 717 and718 Pressure CalibratorsDescription: Use to isolate calibrator from contact with liquids.Input is 1/8” NPT female. Outputis 1/8” NPT Male.Application: The Fluke 700ILFcan be used to isolate the calibrator from incidental contactwith fluids present in the gasmedium being measured.Particularly useful with the 718calibrator to help keep moistureor oils from contaminating theon-board pump. The 1/8” NPTmale threaded output threadsdirectly into the 717 and 718calibrators. Maximum pressure is100 psi. Burst pressure is375 psi. Maximum flow is 10SCFM and filtration to 1 micron.Included: One disposable filterDimensions: 54 mm x 48 mmWeight: 115 gFluke 700PCKProcess Tools Accessories Fluke Corporation

Calibration and Process Calibrator AccessoriesFluke 700PCKPressure Calibration KitApplication: The calibrationmodule provides a 9 volt dcsupply to the 787. At the sametime, it facilitates RS232 communication from the PC runningMET/CAL to the 787 over thebattery leads of the 787.Included: A calibration manual,MET/CAL procedures, and aninterface module that permitsserial communication betweena 787 and a PC.For use with: Fluke 700 SeriesPressure Modules.Description: The Fluke 700PCKmakes it possible to calibrateyour pressure modules at yourfacility using your own precision pressure standards.Application: When installedon your PC, the Windows based software easily steps youNote: An installation of MET/CAL Calibrationthrough an as-found verificaSoftware plus appropriate calibration equiption, a calibration adjustment,ment must be provided by the user.and an as-left verification.Required Calibration Equipment for use withCalibration data is captured forthe Fluke 787CAL Calibration Accessory:import to your database. A 386 Fluke Model 5500 or 5520 CalibratorHP3458 DMM or **HP34401 DMM,or better PC running WindowsFluke 5440A-7002 Test Lead set3.1 or better is required, alongRS43 Null Modem Cablewith a precision pressure stan- FlukePersonal Computer, 486 or better,dard with an uncertainty of less IBM compatibleFluke MET/CAL Calibration Software,than 1/4 that of the pressureVersion 6.0 or latermodule being verified.**HP34401 for use only with 5520A onlyIncluded: The kit consists of5500A requires HP3458 DMMa power supply, an interfaceadapter, appropriate cables, and Fluke 700-IVFluke 700PC Pressure ModuleCurrent ShuntCalibration Software.Warranty: One yearFor use with: Fluke 701, 702,and 740 Series DocumentingProcess Calibrators.Fluke 787CALDescription:Calibration ModuleConversion factor:For use with: Fluke 787 Pro10 mV 1 mAcessMeter and MET/CAL Soft- Accuracy (% of input, 1 year):ware, version 6.0.0.025%Description: The Fluke 787CAL Input current: 0 to 55 mAmodule permits users and serInput resistance: 250Ω, nominalvice facilities to perform autoOutput resistance: 10Ω, nominalmated MET/CAL verificationsAccuracy specification appliesand calibrations of the Flukefrom 18 C and 28-50 C787 ProcessMeter. Maximum input voltage: 30V dcFluke 700-IV Fluke Corporation Process Tools AccessoriesFluke 700BCWApplication: Use the Fluke 700IV Current Shunt to calibrateand troubleshoot mA/mAdevices. On a 741 or 743Documenting Process Calibrator,Source mA and Measure V dc.The custom units function ofthe calibrator automaticallyprovides the correct conversion,and directly displays/capturesthe current in mA.Included: Shunt, instructionsheet.Warranty: One yearFluke 700BCWBar Code WandFor use with: Fluke 743Documenting Process Calibrator.Description: This HewlettPackard HBSW-8200 Bar CodeWand reads eight common barcode symbologies. Code 39,Interleave 2 or 5, UPC A and E,EAN 8 and 13, Codabar, Code128, Code 11, Code 93, and MSICode. Programmable via barcode labels or escape sequences. LED indicates when abar code has been correctlydecoded. Resolution, 0.0075”(.19 mm). Usable from -20 to65 C, in ambient light to 100,00lux. EMI compliance per FCCpart 15 Class B. ESD immunity,25 kV.Application: Supports thescanned entry of procedureidentification, tag ID, serialnumber, and operator ID to aFluke 743 Documenting ProcessCalibrator.