SmartROC D60 - Rocktec Drills

SmartROC D60DTH surface drill rig for quarrying and miningSmartROC D60 hole diameter: 110–178 mm (4.3–7")

Intelligent, toughand dependableThe SmartROC D60 down-the-hole rig from Epiroc is anintelligent drilling solution. The core of the machine is builton a trusted and well-proven platform.The new efficient SmartROC D60consistently delivers high-quality blastholes with accuracy and precision.It is loaded with smart features such asautomated drilling and rod handling. Theautomation-ready platform also includesan Auto Feed Fold option. With a singleaction, the Auto Feed Fold enables theoperator to fold the feed for tramming orposition it for drilling.This also comes in handy whenoperating one or more drill rigs remotelywith the BenchREMOTE option.The extra long feed with 8 meter pipesmakes it possible to drill 16 m productionholes with just one rod-adding.All these features and flexibility arepacked in a rig which is economical torun due to the intelligent control of thecompressor and engine rpm.2The SmartROC D60 also uses 300liters less hydraulic oil than previousversions and features fewer hoses andpumps. This helps to further reducecosts and makes servicing easier, whilstincreasing sustainability and reducingthe environmental impact of the rig.The SmartROC D60 is controlledvia an advanced rig control systemdisplayed on a touch screen inside thecomfortable, air-conditioned FOPSand ROPS-certified cabin. It presentseverything from drilling parameters toreal-time Measure While Drilling data(MWD). A SmartROC rig from Epiroccan significantly raise quality across thewhole operation.

Main benefitsIntelligent, automated and future-proof asa result of Epiroc's unique Smart technologyImproved fuel consumption due to theautomatic control of compressor-load andengine rpmEfficient, productive and consistent thanksto automated drilling and rod handling3

An intelligent rig which you can counton to deliver.The SmartROC D60 is built to face the toughest of conditions. It's loaded with intelligentfeatures that will improve your operations, increase safety and boost productivity.This rig is constantly evolving since it's introduction in order to ensure that your investmentdelivers increased production and profitability shift-after-shift. Increase drilling time with the extra long feedThe SmartROC D60 is available with an optional extra long feed (XLF). It carries8 meter rods with a diameter of 89, 102, 114, 127 or 140 mm. The feed can also beeasily adapted to take 6 meter rods if required. The XLF option means that therig spends less time threading and unthreading rods. In addition, the drill stringis extracted more rapidly. All this adds up to more holes drilled per shift whichincreases both production and profitability. In order to enhance stability, Rigsbuilt with this option are also fitted with tracks placed further apart (wide kit). Self-diagnostic capabilitiesThe SmartROC D60 is well-proven, tough and dependable. However, shoulda situation arise, the rig features an ingenious self-diagnostic system to helptrack down problems quickly and effectively to keep downtime to a minimum.SmartROC rigs are also designed to make life easier. The electrical systemfeatures a reduced number of cables for example – this reduces problems andmakes troubleshooting much quicker. Operate multiple rigs remotelyWith the BenchREMOTE option, one person can safely control up to threerigs simultaneously from up to 100 meters away which dramatically increasesoperator productivity and takes safety to a whole new level. In combination withthe Hole Navigation System (HNS), the BenchREMOTE removes the need foroperators and surveyors to work in hazardous areas. The Auto Feed Fold optionmeans the rig puts the feed in tramming position automatically – a great helpwhen running rigs remotely.A comprehensiveservice offeringEven the best equipment needs to beserviced regularly to make sure it sustainspeak performance. An Epiroc servicesolution offers peace of mind, maximizingavailability and performance throughoutthe lifetime of your equipment. We focuson safety, productivity and reliability.By combining genuine parts and an Epirocservice from our certified technicians,we safeguard your productivity – whereveryou are.4

Technical specificationsMain components Crawler type two speed undercarriage with trackoscillation system CAT C15 turbo-charged diesel engines with Tier 3 or Tier 4Final/Stage V technology Atlas Copco screw-type high-pressure compressors ROPS and FOPS-approved operator cabin with rubbervibration dampers Aluminum profile feed beamSingle-section boom systemToe hole drilling capability on standard feed versionCarousel type tube handling systemBreak-out table with pressure regulating kitHydraulic operated rotary headElectric pump for filling hydraulic oilHole range & length (recommended)Hammer - COP 44 Gold, COP 54 Gold, COP 64 GoldSmartROC D60MetricUS110-178 mm4.33 - 7”Max hole length with hydraulic rod handling system and 5 m (16,4’) rods (Standard Feed - SF)SmartROC D60Ø 89, 102, 114 mm (3.5”, 4”, 4.5”) drill rods45 m148'SmartROC D60Ø 127, 140 mm (5”, 5.5”) drill rods25 m82'Max hole length with hydraulic rod handling system, 6 m (20’) rods and a 7.5 m (24.6') starter rod (Long Feed - LF)SmartROC D60Ø 89, 102, 114 mm (3.5”, 4”, 4.5”) drill rods55.5 m182'SmartROC D60Ø 127, 140 mm (5”, 5.5”) drill rods31.5 m103'Max hole length with hydraulic rod handling system, 8 m (26.2') rods (Extra Long Feed - XLF)SmartROC D60Ø 89, 102, 114 mm (3.5”, 4”, 4.5”) drill rods56 m183.7'SmartROC D60Ø 127, 140 mm (5”, 5.5”) drill rods40 m181'SmartROC D60 standard feedØ 89, 102, 114 mm (3.5”, 4”, 4.5”) drill rods5.4 m18'SmartROC D60 long feedØ 127, 140 mm (5”, 5.5”) drill rods7.5 m24.6'SmartROC D60 XL feedØ 127, 140 mm (5”, 5.5”) drill rods8m26.3"Single pass drilling, max hole depthRotary headElectrical systemConnection threadMax rpmDHR6 H 45API 2 3/8” REG, boxDHR6 H 56Voltage24 VBatteries2 x 12 V, 235 AhCOP 44 Gold (COP 54 Gold)Alternator28 V, 95 Ah1735 lbfCOP 54 Gold, COP 64 Gold, COP M6Work lights, LED type, front4 x 4 200 Lumen5 800 Nm2712 lbfCOP 64 Gold, COP M6Work lights, LED type, rear2 x 4 200 Lumen6 600 Nm3417 lbfCOP 64 Gold, COP M6, COP M7Work lights, LED type, feed2 x 4 200 LumenMax torque, drillingMetricUS1371 839 Nm1356 lbfAPI 3 1/2” REG, box1072 353 NmDHR6 H 68API 3 1/2” REG, box68DHR6 H 78API 3 1/2” REG, box54Suitable for DTH-hammerWarning lamp and reverse alarmAluminum feedDust collectorAluminum profilefeed with hoseguide and doubledrill tube supportwith break-outtable and movablelower guide/dusthoodDCT 320 includingpre-separatorMetricUSCompressor344 sq.ftMetricAtlas Copco XRX 10, two stagescrew type compressorFeed rate, max0.9 m/sUSFilter area32 mSuction capacity at 500mm wg1 270 l/s2 690 cfmSuction hose diameter203 mm8"Cleaning air pressure, max8 bar116 psiCleaning air consumption2–4 l/pulse0.06–0.12cfm/pulse2177 ft/minFeed force, max40 kN8 992 lbfTractive pull, max50 kN11 240 lbfFeed motor size2099 cc0.6 US galChain size45 mm1.8"Standard FeedFeed extension1 150 mm45.3"Travel length5 400 mm212.6"Total length11 600 mm456.7"Feed extension1 900 mm74.8"Travel length7 540 mm296.8"Total length9 400 mm370"Long FeedXL FeedNumber of filter elements25 bar363 psi405 l/s858 cfmCarrierMetricUS3.2 km/h2.0 mphTraction force, max138 kN31 020 lbfGround clearance405 mm16”55 C131 FTrack oscillationAxial piston pump (1)225 l/min59.4 gal/minAxial piston pump (2)160 l/min42.3 gal/minVolumesAxial piston pump (3)63 l/min16.6 gal/minMax ambient temperature 10 PumpsGear pump (4)41 l/min10.8 gal/minGear pump (5)41 l/min10.8 gal/minReturn and drainage filters (2 x 3 filters)Filtration rate10 µm absoluteFeed extension1 150 mm45.3"Travel length8 500 mm334.6"EngineTotal length12 400 mm488"CAT C15, turbo-charged, dieselengine, Tier 4 Final /EU Stage5 (multi-certified for US and EUmarkets) or Tier 3/stage IIIAMetricPower rating @ 1 800 rpm354 kWWeightWorking pressure, maxTramming speed, maxHydraulic oil coolerUSFAD at 25 bar32 pcsHydraulic systemMetricUS475 hpMetricUSHydraulic oil tank120 l31.7 galHydraulic system, total270 l71.3 galCompressor oil63 l12 galDiesel engine oil44 l11.6 galDiesel engine, coolant, Tier 365 l17 galDiesel engine, coolant, Tier 4110 l29 galDiesel engine, fuel tank975 l258 galTraction gear3l0.8 galLubrication tank (HECL)20 l5.3 galDEF fluid tank (Tier 4 final only)34 l9 galStandard unit excluding all options and drill rods (OM)MetricSmartROC D60 long feedTier 3 25 550 kgTier 4 25 800 kgUSTier 3 56 328 lbTier 4 56 879 lbSmartROC D60 standard feedTier 3 24 900 kgTier 4 25 150 kgTier 3 54 895 lbTier 4 55 446 lbSmartROC D60 XL feedTier 3 26 450 kgTier 4 26 700 kgTier 3 58 312 lbTier 4 58 863 lb5

Technical specificationsSemi automatic feedalignment system ensuresthat the hole angle is exactlyas desired.A robust feed with inbuiltsensors means fewerbreakdowns and morereliable rod handling.The fully-automated drillcycle allows you to reachdesired hole depth whiledrill tubes are added andextracted automatically.Discover more aboutthe SmartROC D60.Smart options such asthe Hole NavigationSystem (HNS) reducesyour non-drilling timeand improves precision.Cabin ROPS and FOPS approved with rubbervibration dampers 2 x wipers with washer Clear laminated glass(front and roof windows) Clear toughened glass(side and rear windows) Fully adjustable, electrically heatedoperator seat Foot rest Cabin light Air conditioning/heating Rig inclination indicator Cabin 6 kg dry chemical fire extinguisher, typeABE class III Clear laminated glass (front androof windows) Tinted toughened glass (side andrear windows) Sunshade kit Radio/CD Reverse camera with display integratedinto main displayLubrication Central lubrication system, type Lincoln Thread lubrication, spray system Artic hydraulic oil, VG 32 Tropical hydraulic oil, VG 68 Biological hydraulic oil, VG 46Feed Service winch with jib boom mountedon the feed Wide feed foot Protective guard, according to EN16228 35 pre-splitting boom system Reverse Circulation (RC) Screw sampler device Pre-split suction hood Auto Feed FoldAutomation and software BenchREMOTE remote operator station Rig Remote Access Surface Manager Reporting Rig Access control Configurable safety softwareRear view mirror24 V outlet socketPrepared for CD radioElectric combined engine/inclinationhole depth instrumentOptional equipmentCarrier Wide body kit Hydraulic support leg Protection hand rails on top of canopy Extra LED worklight package Heavy duty air intake filters for engineand compressor Combined warning sound and beacon Manual or automatic AnsulCheckfire 210 fire extinguisher system Electric fuel filling pump Fast fuel-filling system Diesel-driven engine pre-heater Insulated and heated compressorregulation system Arctic Fox -40 C cold start Battery sliding trayWater mist system Water mist system, pump, one or two400 l water tanks Arctic-ready water mist system, pump,one or two 400 l water tanksHorizontal body6Backwards tilt body: 10 Hole and inclination systems Hole Navigation System GPS compass aiming unit Laser receiverParts and services products ROC CareOptional accessories Tool kit for rotary head with fixedspindle sub Tool kit for rotary head with floatingspindle sub Lubrication kit RCS tool boxFront tilt body: 10 D60 XLF-15.5 D60 XLF-20.5 D60 XLF-11 D60 XLF with auto feed fold-8.5 D60 XLF with auto feed fold-11.5 D60 XLF with auto feed fold-4