IndustrIal Dowel DrIlls - Scosarg
ooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdIndustrial DowelDrillsPRODUCTSAdaptersXTreme Solid Carbide Boring BitsSolid Carbide Twist Drills2 Flute Dowel Drills4 Flute Dowel DrillsTeScott SargeantWXTreme Boring BitsDowel Drills with CountersinkThrough Hole Dowel DrillsCountersinksHinge Boring BitsDowel Drills with Threaded ShankPAGE292 294295 297298-299300-301302-303304 306307308-309310311 313314 316
AdaptersRH LH301B40DSmmmmmm8101619,5M8M8ORDER NO.1010For use on the following machines:25ORDER NO.Right-hand rotationLeft-hand are partsNottmeyer (older models).990.006.00991.062.00BRH LH302Smm8101619,5M10M10ORDER NO.ooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L040DmmtdBmm1010For use on the following machines:25Left-hand are partsAyen, Holzma, Knoevenagel, Mayer, Torwegge.990.006.004628,3Bmm810DTeScott Sargean303Smmmm1619,5M10/30 M10/30 991.062.00RH LHtWBORDER NO.Right-hand rotationORDER NO.1010For use on the following machines:ORDER NO.Right-hand rotationLeft-hand are partsAlberti (older models).Balestrini, Bilek, Busellato (older models).Schleicher, Vitap (older models).990.006.00991.062.00BRH LH304B4825,5DSmmmmmm8101619,5M8/20 48’M8/20 48’For use on the following machines:ORDER NO.1010ORDER NO.Right-hand rotationLeft-hand are partsBalestrini, Bilek.990.006.00991.062.00B292www.scosarg.com
AdaptersRH LH305BØ1141DSmmmmmm8101619,5M10/11M10/11ORDER NO.1010For use on the following machines:Left-hand are partsBiesse (older models).Masterwood (Zangheri & Boschetti).Morbidelli, Torwegge, Vitap (new design).Weeke.25ORDER NO.Right-hand rotation990.006.00991.062.00BRH LH358408101619,5M8/9M8/9ORDER NO.1010For use on the following 10991.062.00RH LHORDER NO.10ORDER NO.Right-hand rotationLeft-hand rotation359.000.01359.000.02Spare partsFor use on the following ott SarmmLeft-hand rotationtWBORDER NO.Right-hand rotationSpare partsMasterwood (Zangheri & Boschetti).Morbidelli, Nottmeyer (new design).2546Smmooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0Ø9DmmtdBmm990.006.00991.062.00BDRH LH360.001B37dDmmmmmm102015For use on the following machines:ORDER NO.10ORDER NO.Right-hand rotationLeft-hand rotation360.001.01360.001.02Spare partsFor Biesse machines with quick drill change 3
AdaptersD360.101BdDmmmmmm1017,518ORDER NO.Right-hand & Left-hand rotation360.101.0010Spare partsFor use on the following m1019,520ORDER NO.ooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0mmtdBmmRight-hand & Left-hand rotation360.201.0010Spare partsFor use on the following tSc40Bmm10dTet Sarge360.301Dmmmm19,520ORDER NO.Right-hand & Left-hand rotation360.301.0010Spare partsFor use on the following machines:Masterwood, Maggi, 017ORDER NO.Right-hand & Left-hand rotation360.401.0010For use on the following machines:46Spare partsWeeke.990.009.00Ø817BD294990.088ORDER NO.DescriptionM5991.067.00Retaining screw for Weeke machinesRight-hand & Left-hand rotation10990.088.00www.scosarg.com
Maximizing Boring PerformanceLINEXTREME FLATXTREMEXTREMEINDUSTRIALPERFORMANCESUPERIOR SUPERIOR EXCELLENT VERY GOOD DESCRIPTIONDesigned for heavy duty drilling in Large-ScaleIndustrial Manufacturing ensuring high impactresistance and greater durability.Designed for heavy duty drilling in Large-ScaleIndustrial Manufacturing ensuring high impactresistance and greater durability.Designed for heavy-duty to medium-duty drillingin large-scale to medium-scale industrialmanufacturing ensuring high impact resistanceand greater durability.Designed for medium-duty to light-duty drillingin medium-scale to small-scale industrialmanufacturing ensuring rigorous impactresistance and good durability.USERLARGE-SCALE INDUSTRIAL MANUFACTURINGLARGE-SCALE INDUSTRIAL MANUFACTURINGLARGE-SCALE TO MEDIUM-SCALE INDUSTRIALMANUFACTURINGMEDIUM-SCALE TO SMALL-SCALE INDUSTRIALMANUFACTURINGRECOMMENDEDUSEINDUSTRIAL PRODUCTIONINDUSTRIAL eal for chipboard, MDF, HDF and laminates.Nonprotruding center-point and spurs make thistool perfect for low-thickness panels.Ideal for chipboard, MDF, HDF and laminates.Excellent for both hard and soft wood. Great forchipboard, MDF, HDF and laminates.Excellent for both hard and soft wood. Good forchipboard, MDF, and laminates.SHARPENING &MAINTENANCEFlat edges with reinforced spurs allow perfectfinishing and prolonged drilling.Specially designed reinforced spurs allow forimpeccable finishing during operations involvinghigh-speed cutting feed.Xtreme Flat SharpeningXtreme SharpeningXtreme SharpeningNegatively Ground SpursCARBIDEINDUSTRIAL CHROMIUM MICROGRAIN CARBIDEThe premium quality carbide produces cleanbores with no rough edges and maintains abalanced center point. In addition to its safetyfeatures, Chromium Micrograin Carbide guaranteesexceptional resistance to fatigue and abrasion andallows for an infinite number of resharpenings.INDUSTRIAL CHROMIUM MICROGRAIN CARBIDEThe special chromium enhanced carbide producesclean bores with no rough edges and maintainsa balanced center point. In addition to its safetyfeatures, Chromium Micrograin Carbide guaranteesexceptional resistance to fatigue and abrasionand allows for an infinite number of resharpenings.INDUSTRIAL SINTERHIP HI-DENSITY CARBIDEThe unique tip is made of high quality carbideenhanced via Sinterhip (hot isostatic pressing).This process guarantees long lasting performanceand exceptionally clean bores.INDUSTRIAL GRADE CARBIDEFine and medium grain carbide grade guaranteereliable prolonged use.C.M.T’S P.T.F.E COATINGprovides a non-stick surface preventingresin, glue or sludge residue accumulationon the bit body. Baked at 420 , this uniqueindustrial material is specifically designed to fitwoodworking tool requirements.C.M.T’S P.T.F.E COATINGprovides a non-stick surface preventingresin, glue or sludge residue accumulationon the bit body. Baked at 420 , this uniqueindustrial material is specifically designed to fitwoodworking tool requirements.MEDIUM/HIGHMEDIUMStandard design with negatively ground spursproviding good quality finishing without chipping.tWangeHIGHTeotHIGHSpecially designed reinforced spurs allow forimpeccable finishing during operations involvinghigh-speed cutting feed.SOLID TUNGSTEN CARBIDEScPRICE RANGEt SSOLID TUNGSTEN CARBIDEarCOATINGooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdBITSolid Carbide Dowel Drills311.71/72D30IHWM LONGLIFE Z2 V2 RH LHFLAT SHARPENINGLSmmmmmmmm583030707010x3010x30ORDER NO.5050Technical details:- Premium quality super strength steel for improvedresistance and durability- Premium quality HWM spiral portion- 2 cutting edges [Z2] 2 curved ground spurs [V2]- 2 spiral flutes- Parallel shank with driving flat and adjustable screw length- Recommended feed speed 1 4m/minute –RPM 6000Application:ideal for use with chipboard, MDF, HDF and laminates.Best for boring holes in low thickness panels – no center-point or spurs.For use with chucks and boring Adapters on boring machinesCMT’s new high quality dowel drills guaranteeexcellent performance and extra-long life!ORDER NO.Right-hand rotationLeft-hand are partsOptional990.003.00990.088.00Xtreme Flat SharpeningFlat sharpening with nocenter-point or spurswww.scosarg.com295
Solid Carbide Dowel DrillsHWM LONGLIFE Z2 V2 RH LH310.21/22DMin. 25Max 35ILSORDER NO.Right-hand rotationmmmmmmmm1,32334566,35 0x2710x2710x2510x25ORDER NO.Left-hand rotation50 310.013.20*50310.020.21 310.020.2250310.530.21 310.530.2250310.030.21 310.030.2250310.040.21 310.040.2250310.050.21 310.050.2250310.060.21 310.060.2250310.064.21 310.064.2250310.080.21 310.080.2250310.100.21 310.100.22* Boring bit for panel preboring.Suitable for both right-hand and left-hand rotation.Spare partsOptional990.003.00990.088.00ooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdXTreme SharpeningHWM LONGLIFE Z2 V2 RH LH311.21/22DSORDER NO.Right-hand rotationmmmm1,3233,54566,35 angeORDER NO.Left-hand rotation50311.013.20*50311.020.21 311.020.2250311.030.21 311.030.2250311.035.21 311.035.2250311.040.21 311.040.2250311.050.21 311.050.2250311.060.21 311.060.2250311.064.21 311.064.2250311.080.21 311.080.2250311.100.21 311.100.22Teart SotScXTreme SharpeningLmmtWMin. 25Max 45Imm* Boring bit for panel preboring.Suitable for both right-hand and left-hand rotation.Spare partsOptionalTechnical details:990.003.00990.088.00- Premium quality super-strength steel.- HWM spiral portion with centre point.- 2 cutting edges [Z2].- 2 spiral flutes.- 2 curved, negatively ground spurs [V2].- Parallel shank with driving flat and adjustable screw length.Application:used on boring machines separately or with chucks for drilling blind holes in solid wood, wood composites, plasticand laminated materials.Perfect for all materials and long-lasting performance!Grinding Wheels for XTreme Sharpening01.02DmmØ3 a 7Ø8 a 10DimensionDescriptionGrinding wheel for resharpeningGrinding wheel for resharpeningmmmmBPackQty.ORDER Ø20Ø125296www.scosarg.com
Solid Carbide Dowel Drills for Through HolesHWM LONGLIFE Z2 RH LH314.21/22DMin. 25Max 0x2610x2610x2610x2610x27ORDER NO.505050505050For panels with maximum 20-30mm in thicknessTechnical details:- Premium quality super-strength steel.- HWM spiral portion with centre point.- 2 precision ground cutting edges [Z2].- Double angle.- 2 spiral flutes.- Parallel shank with driving flat and adjustable screw length.Left-hand 4.060.22314.080.22314.100.22Spare partsOptional990.008.00990.088.00Scott SargetWan382Dmm222,52,5333,53,555ILHWM LONGLIFE 610x2510x25TeSolid Carbide Dowel Drillsooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdApplication:used on boring machines and dowel drilling devices.Use for drilling through holes in solid wood, wood composites, plastic and laminated materials.XTreme SharpeningAmbidextrousORDER NO.Right-hand rotationTechnical details:- Premium quality HWM.- Cutting head with precision balanced centre point.- 1 cutting edge [Z1].- Parallel shank with driving flat and length adjusting screw.ORDER NO.Right-hand & Left-hand 382.5070Spare partsOptional990.003.00990.088.00Application:for drilling blind holes on solid wood, wood composites, plastic and laminated materials. For use on machiningcentres, point to point machines, CNC routers and hand-held routers equipped with chucks or Adapters.90 Security tips:These boring bits require more power compared to tradition dowel drills.The number of boring bits to be used in a single drilling unit depends on the machine power.www.scosarg.com297
Dowel DrillsHW LONGLIFE Z2 V2 RH DER NO.505050505050Left-hand 0.080.42310.090.42310.100.42Technical details:- Premium quality super-strength steel.- Spiral portion coated with orange or black P.T.F.E.- Extra-fine micrograin carbide spiral portion with centre point.- 2 cutting edges [Z2].- 2 spiral flutes.- 2 curved, negatively ground spurs [V2].- Parallel shank with driving flat and adjustable screw length.XTreme SharpeningORDER NO.Right-hand rotationSpare partsOptional990.003.00990.088.00Dowel Drillsooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdApplication:used on boring machines separately or with chucks for drilling blind holes in solid wood, wood composites, plasticand laminated materials.HW LONGLIFE Z2 V2 RH LH311.41/42Scott 07070707010x3010x3010x3010x3010x1910x3010x30ORDER NO.50505050505050Left-hand Technical details:- Premium quality super-strength steel.- Spiral portion coated with orange or black P.T.F.E.- Extra-fine micrograin carbide spiral portion with centre point.- 2 cutting edges [Z2].- 2 spiral flutes.- 2 curved, negatively ground spurs [V2].- Parallel shank with driving flat and adjustable screw length.XTreme SharpeningORDER NO.Right-hand rotationSpare partsOptional990.003.00990.088.00Application:used on boring machines separately or with chucks for drilling blind holes in solid wood, wood composites, plasticand laminated materials.* Drill bits designed to fit Häfele one-piece Ixconnect SC 8/60 spreading connector.Perfect for all materials and long-lasting performance!CMT announces the new series of solid carbide boring bits, now available from their extensive industrial line.These bits are entirely made of premium quality super micrograin carbide from Ceratizit in Luxemburg.The entire series offers several design features:- the unique tip has curved, negatively ground spurs to produce exceptionally clear bores with no rough-edges.Centre point balanced;- the cylindrical head is bigger than traditional tips and is extremely resistant to prolonged use.It lasts longer between sharpenings;- the plunge edge runs all the way to the centre of the bit to reduce drilling resistance and increase production speed;- the solid carbide construction guarantees an almost infinite number of resharpenings,and since it is a solid unit of carbide, it offers extra safety features;- ideal for hardwood and difficult composites such as particle boards, MDF and veneered wood.- excellent performance on high-speed boring units and CNC routers.298www.scosarg.com
Dowel Drills for Through HolesHW LONGLIFE Z2 RH RDER NO.5050ORDER NO.Right-hand rotationLeft-hand r panels with maximum 20mm in thicknessSpare partsOptional990.003.00990.088.00Technical details:- S uper-strength steel.- S piral portion coated with orange or black P.T.F.E.- Extra-fine micrograin carbide spiral portion with centre point.- HW head with precision balanced centre point.- 2 precision ground cutting edges [Z2].- Double angle.- 2 spiral flutes.- P arallel shank with driving flat and length adjusting screw.Application:used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites,plastic and laminated materials.Dowel Drills for Through Holesooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdXTreme SharpeningHW LONGLIFE Z2 RH LHmmge26Scott x2610x2610x26TeanDtW314.41/42ORDER NO.5050505050Left-hand 4.100.42For panels with maximum 30mm in thicknessTechnical details:- S uper-strength steel.- S piral portion coated with orange or black P.T.F.E.- Extra-fine micrograin carbide spiral portion with centre point.- HW head with precision balanced centre point.- 2 precision ground cutting edges [Z2].- Double angle.- 2 spiral flutes.- P arallel shank with driving flat and length adjusting screw.XTreme SharpeningORDER NO.Right-hand rotationSpare partsOptional990.003.00990.088.00Application:used on boring machines and dowel drilling devices. Use for drilling through holes in solid wood, wood composites,plastic and laminated materials.Perfect for all materials and long-lasting performance!CMT announces the new series of solid carbide boring bits, now available from their extensive industrial line.These bits are entirely made of premium quality super micrograin carbide from Ceratizit in Luxemburg.The entire series offers several design features:- the unique tip has curved, negatively ground spurs to produce exceptionally clear bores with no rough-edges.Centre point balanced;- the cylindrical head is bigger than traditional tips and is extremely resistant to prolonged use.It lasts longer between sharpenings;- the plunge edge runs all the way to the centre of the bit to reduce drilling resistance and increase production speed;- the solid carbide construction guarantees an almost infinite number of resharpenings,and since it is a solid unit of carbide, it offers extra safety features;- ideal for hardwood and difficult composites such as particle boards, MDF and veneered wood.- excellent performance on high-speed boring units and CNC routers.www.scosarg.com299
Adapters for Twist 83810x2010x2010x2010x2010x2010x2010x2010x20ORDER pare partsFor use with the following items: 363 HWMTechnical details:- Super-strength steel.- Quick and secure assembly on twist drills.- Precision relief.- Parallel shank with driving flat.990.001.00991.062.00Bushings for Twist DrillsB365BmmLScTechnical details:- Super-strength steel.- Shank with driving flat.- Axial cuttings for cylindrical drill clamps.Teott SargeantW22,533,23,544,556ooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdApplication:for use with twist drills with common shank and bushing diameter.Used on boring machines equipped with Adapter DER 05050505050For use with the following items: 363 HWMApplication:used with spiral boring bits with shankdiameters equal to the bushing diameter.Used on boring machines equipped withAdapters.Assembly ers365Bushings363Twist drills363Twist drills300www.scosarg.com
Solid Carbide Twist Drills “V” Point SharpeningHWM LONGLIFE Z2 RH LH363S 5556060ORDER NO.5050505050505050ORDER NO.Right-hand rotationLeft-hand 3.045.12363.050.12For use with the following items: 364-365Technical details:- Premium quality HWM.- 2 precision ground cutting edges [Z2].- 2 spiral flutes.- Common shank and drilling diameter (S D).“V” Point120 ooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdApplication:used in Adapter bushings.Solid Carbide Twist Drills “V” Point 60 Sharpening363S DIgean2,533,54tWmmHWM LONGLIFE Z2 RH LHLmmmm2727272755555555ORDER NO.50505050ORDER NO.Right-hand rotationLeft-hand 3.025.42363.030.42363.035.42363.040.42arFor use with the following items: 364-365“V” Point60 TeScott STechnical details:- Premium quality HWM.- 2 precision ground cutting edges [Z2].- 2 spiral flutes.- Common shank and drilling diameter (S D).Application:used in Adapter bushings.Solid Carbide Twist Drills Negatively Ground Spurs SharpeningHWM LONGLIFE Z2 RH LH363S DILmmmmmm2,53452727272855555560ORDER NO.50505050ORDER NO.Right-hand rotationLeft-hand 3.025.22363.030.22363.040.22363.050.22For use with the following items: 364-365Technical details:- Premium quality HWM.- 2 precision ground cutting edges [Z2].- 2 spiral flutes.- Common shank and drilling diameter (S D).X-TremeSharpeningApplication:used in Adapter bushings.www.scosarg.com301
2 Flute Dowel DrillsHW Z2 V2 RH 0x2710x2710x27tdmmScott Sar361Dmm567810ITegean2 Flute Dowel 01010101010ORDER NO.Left-hand 0.150.12310.160.12Spare partsOptional990.003.00990.088.00HW Z2 V2 RH 0x3410x3410x34Technical details:- Super-strength steel.- Spiral portion coated with orange or black P.T.F.E.- HW head with precision balanced centre point.- 2 HW precision ground cutting edges [Z2].- 2 negatively ground spurs [V2]- 2 spiral flutes.- Parallel shank with driving flat and length adjusting screw.Negatively Ground SpursORDER NO.Right-hand rotationtWNegatively Ground SpursLmmooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L027ImmORDER NO.5050505050ORDER NO.Right-hand rotationLeft-hand 1.100.12Spare partsOptional990.003.00990.088.00Application:used on boring machines equipped with Adapters or chucks.Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.www.scosarg.com
2 Flute Dowel DrillsHW Z2 V2 RH 10x3010x3010x3010x3010x3010x30Scott Sar362Dmm56781012ILORDER 0ORDER NO.Right-hand rotationLeft-hand 1.130.12311.140.12311.150.12311.160.12Spare partsOptional990.003.00990.088.00HW Z2 V2 RH x3010x3010x30Tegean2 Flute Dowel Drills30SmmtWNegatively Ground SpursLmmooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L030ImmtdDmmTechnical details:- Super-strength steel.- Spiral portion coated with orange or black P.T.F.E.- HW head with precision balanced centre point.- 2 HW precision ground cutting edges [Z2].- 2 negatively ground spurs [V2].- 2 spiral flutes.- Parallel shank with driving flat and length adjusting screw.ORDER NO.505050505010ORDER NO.Right-hand rotationLeft-hand 2.080.12362.100.12362.120.12Spare partsOptional990.003.00990.088.00Application:used on boring machines equipped with Adapters or chucks.Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.Negatively Ground Spurswww.scosarg.com303
4 Flute Dowel DrillsHW HWM Z2 V2 RH LH306D20ILSmmmmmmmm 208x208x208x208x20ORDER NO.50505050505050505050ORDER NO.Right-hand rotationLeft-hand 6.070.12306.080.12306.090.12306.100.12306.120.12 HWMOptional990.003.00990.088.004 Flute Dowel DrillsHW Z2 V2 RH LHScott Sarge20Negatively Ground Spurs304Dmm55,5566,357899,521012ITeantW307ooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdNegatively Ground SpursSpare al details:- Super-strength steel.- Cutter portion coated with black or orange P.T.F.E.- HW head with precision balanced centre point.- 2 HW precision ground cutting edges [Z2].- Negatively ground spurs [V2].- 4 spiral flutes.- Parallel shank with driving flat and length adjusting screw.ORDER NO.50505050505050505010ORDER NO.Right-hand rotationLeft-hand 7.120.12Spare partsOptional990.003.00990.088.00Application:used on boring machines equipped with Adapters or chucks.Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.www.scosarg.com
4 Flute Dowel DrillsHW Z2 V2 RH 0x2010x2010x2010x2010x20ORDER NO.50505050505050505010101010101010geScott SarmmNegatively Ground Spurs4566,3577,5899,5210111212,713141516ooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0D20ILLeft-hand 10x2010x2010x2010x2010x2010x2010x20Technical details:- Super-strength steel.- Cutter portion coated with black or orange P.T.F.E.- HW head with precision balanced centre point.- 2 HW precision ground cutting edges [Z2].- Negatively ground spurs [V2].- 4 spiral flutes.- Parallel shank with driving flat and length adjusting screw.Spare partsOptional990.003.00990.088.00HW Z2 V2 RH LHSmmTean309tW4 Flute Dowel DrillsORDER NO.Right-hand rotationtdNegatively Ground SpursImmORDER NO.5050505050505050505010101010101010ORDER NO.Right-hand rotationLeft-hand are partsOptional990.003.00990.088.00Application:used on boring machines equipped with Adapters or chucks.Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.www.scosarg.com305
4 Flute Dowel DrillsHW Z2 V2 RH 510x2710x2710x2710x2710x2710x27ORDER NO.505050505010Technical details:- Super-strength steel.- Cutter portion coated with black or orange P.T.F.E.- HW head with precision balanced centre point.- 2 HW precision ground cutting edges [Z2].- Negatively ground spurs [V2].- 4 spiral flutes.- Parallel shank with driving flat and length adjusting screw.ORDER NO.Right-hand rotationLeft-hand 3.080.12373.100.12373.120.12Spare partsOptional990.003.00990.088.00ooldw 4 Eorw 4 NGkiw (0 LngwA.s ) 1 NMco 40 Dacsa 3hirg 27ne.c 3ryom 00L0tdApplication:used on boring machines equipped with adapters or chucks.Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.gean4 Flute Dowel Drills30Scott Sar372Dmm56781012TetWNegatively Ground SpursILHW Z2 V2 RH 0x3010x3010x3010x30Technical details:- Super-strength steel.- Cutter portion coated with black or orange P.T.F.E.- HW head with precision balanced centre point.- 2 HW precision ground cutting edges [Z2].- Negatively ground spurs [V2].- 4 spiral flutes.- Parallel shank with driving flat and length adjusting screw.ORDER NO.101010101010ORDER NO.Right-hand rotationLeft-hand 2.080.12372.100.12372.120.12Spare partsOptional990.003.00990.088.00Application:used on boring machines equipped with adapters or chucks.Used to drill blind holes in solid wood, wood composites, plastic and laminated materials.Negatively Ground Spurs306www.scosarg.com
Dowel Drills with CountersinkHW Z2 V2 RH LH376-37715Negatively Ground ER NO.ORDER NO.Right-hand rotationLeft-hand rotation101010101010101
PRODUCTS PAGE Adapters 292 294 XTreme Solid Carbide Boring Bits 295 297 XTreme Boring Bits 298-299 Solid Carbide Twist Drills 300-301 2 Flute Dowel Drills 302-303 4 Flute Dowel Drills 304 306 Dowel Drills with Countersink 307 Through Hole Dowel Drills 308-309 Countersinks 310 Hinge Boring Bits 311 313 Dowel D
math-drills.com math-drills.com math-drills.com math-drills.com math-drills.com math-drills.com math-drills.com math-drills.com math-drills.com Making Number Patterns (C) I
translation is a function of dowel length, dowel section properties and dowel material. Note that longitudinal translation is a function of both dowel position during placement and where the sawing crew cuts the joint with respect to the dowel location. Depth deviation or vertical translation must be limited to ensure that there is enough concrete
4" diameter dowel needs to be supported every 8". Dowel between 1/ 4" and 5/ 8" will need to be supported every 12", and all dowel larger than 5/ 8" will need to be supported every 15". Figure 4 illustrates a typical set-up for running dowel. Note: Bear in mind that even with proper support, there is still a fi nite dowel length that can be .
Sika Speed Dowel Concrete Doweling System for Slabs-On-Ground Sika Speed Dowel is the pioneering slip dowel installation system that ensures proper dowel alignment for positive load transfer in slab-on-ground concrete joints. Sika Speed Dowel has revolutionized how the concrete industry designs and constructs joints for superior
dowel bar alignment specification and conducted field testing to determine the dowel alignment levels being achieved in the field. During 2006, the MTO established a new set of requirements for dowel bar alignment (Lane and Kazmierowski 2006), as summarized below for 450-mm-long (18 in.) dowel bars. Horizontal and vertical rotational alignments:
Funk Roberts Fitness Mobility Drills and Routines // www.funkrobertsfitness.com 01 MOBILITY DRILLS AND ROUTINES In this guide you will find mobility flow drills and warm up routines that you can use prior to training. Mobility Flow Drills Bodyweight Flow drills are great for warming up as they increase the body's
throughout the ladder The second types of drills are burst drills. These drills focus on the ability to turn on rapid burst of foot movement. The third types of drills are elastic response drills. These drills focus on improving the reactive speed components of the lower leg. A standard agility ladder is 15 feet long and 20 inches wide
TOP SECRET//HCS/COMINT -GAMMA- /TK//FGI CAN GBR//RSEN/ORCON/REL TO USA, CAN, GBR//20290224/TK//FGI CAN GBR//RSEN/ORCON/REL TO USA, CAN, GBR//20290224 In the REL TO marking, always list USA first, followed by other countries in alphabetical trigraph order. Use ISO 3166 trigraph country codes; separate trigraphs with a comma and a space. The word “and” has been eliminated. DECLASSIFICATION .
