FS And FD Cast Device Boxes V CSA Certification Only.
FS and FD Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.Applications Accommodate wiring devices such as switches andreceptacles. Provide excellent service in areas where boxes are subjectto rough usage. Serve as pull boxes for conductors. Permit access to conductors for maintenance. Provide openings for making splices. Allow connections for branch conduit runs. Blank bodies for special conduit entrance arrangements.FeaturesGasket is designed so that it “wraps around”ridge top of Appleton aluminum or malleable iron device box.Result is a positive seal against moisture.FittingsCertifications and Compliances CSA Standard: C22.2 No. 18.1 CSA Certified: 001472Reference Data When ordering drilled and tapped openings or brazed hubs forblank bodies, refer to FS and FD Cast Device Boxes Drilling andTapping Information V pages.Standard Materials Cast hub device boxes and boxes for drilling and tapping:malleable iron or copperfree (4/10 of 1% max.) aluminum Brazed hubs: malleable iron Covers: malleable iron, steel, or copperfree (4/10 of 1% max.)aluminumStandard Finishes Malleable iron boxes and covers: triple-coat — (1) zincelectroplate, (2) chromate, and (3) aluminum polymer enamel Aluminum boxes and covers: epoxy powder coat Steel covers: zinc electroplate Screws: stainless steelOptions Enclosures drilled for 347 Volt devices. Add suffix -347.V CSA Certification Only.Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 201079Fittings: Cast Device Boxes Corrosion-resistant — ideal for indoor and outdoor installations. Weatherproof, raintight and dust-tight when used with castgasketed covers. FS and FD boxes take standard flush wiring devices. FD boxes take devices exceeding 1-5/8” in depth underfastening ears. Malleable iron for high tensile strength and ductility — providesgreater resistance to impact and shock. Both malleable iron and aluminum boxes have ridge topconstruction for positive cover/gasket/box fit. Accurately tapped, tapered threads for tight, rigid joints, groundcontinuity. Complete selection of covers, receptacles, plugs, gaskets andaccessories. Covers have captive stainless steel screws to speed installation,prevent "freezing" of screws. Ground screw at top of box for easy access. Cast Hub Boxes— Available in single, two, three and four gang and tandem.— Smooth, rounded integral bushing in each hub protectsconductor insulation. FD Blank Bodies for Brazed Hubs or Drill and Tapped Entries— Available in single, two, three and four gang boxes.— Drill and tapped entries.— Brazed threaded hubs for threaded conduit from 1/2” thru1-1/2” and brazed union hubs from 1/2” thru 1-1/4.— Smooth, rounded integral bushing in each hub protectsconductor insulation.— Ground screw at top of box for easy access.
FS and FD Single-Gang Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.Malleable IronCatalog .77FSCC-1A0.57/0.26FSCC-21A ngsWt. lowFSCC-21 0/0.453/4Fittings: Cast Device BoxesAluminumCatalog NumberWt. FSL-22.34/1.06Shallow* Use FD Unilets for wiring devices exceeding 1-5/8” in depth under fastening ears.V CSA Certification Only.80Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 2010
FS and FD Single Gang Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.Malleable IronCatalog NumberSizeWt. llow3/41/23/4Deep1Wt. w3/4AluminumCatalog -33.50/1.59DeepShallowDeepDimensions in Inches/MillimetersFittings: Cast Device Boxes3.28/83.3Fittings2.75/69.94.31/3.25/ 109.582.61.88/47.8FS & FD Single Gang DevicesDHub 5/1.31.38/0.6V CSA Certification Only.Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 201081
FS and FD Single Gang Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC.CatalogNumberDescriptionWt. Lbs./Kgs.Per 100Single Gang CoversFS-4 *12.00/5.44Round Receptacle Cover, Steel — Zinc ElectroplateHole dia. 1-7/16"FS-5 *12.00/5.44Duplex Receptacle Cover, Steel — Zinc ElectroplateFS-6 *10.00/4.54Round Receptacle Cover, Steel — Zinc ElectroplateHole dia. 1-5/8"FS-8 *12.00/5.44Tumbler Switch Cover, Steel — Zinc ElectroplateFS-9 *12.00/5.44Tumbler Switch Cover, Steel — Zinc ElectroplateFSK-ITS-G †22.00/9.98For pilot lampFittingsFittings: Cast Device BoxesBlank Cover, Steel — Zinc ElectroplateRed JewelFSK-1J †Amber JewelFSK-1JA †Green JewelFSK-1JG †Opal JewelFSK-1JO †Blank Cover, Malleable Iron, Zinc ElectroplateFS-100G25.00/11.34Single Gang Weatherproof Covers56.00/25.40* Available in Aluminum: Add suffix -A to Catalog Number.† Also for use with multiple gang Unilets with individual cover openings.V CSA Certification Only.82Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 2010
FS and FD Single Gang Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC.DescriptionCatalog NumberMalleable IronAluminumRidge TopRidge TopCast Covers Only — Weatherproof — Furnished with gasket and stainless steel screwsReceptacle cover with spring cover.Hole Diameter — 1-7/16”FSK-1VRCNRocker type for square handle tumbler or toggle switchesFSK-1VCNFSK-1V-ACNFor duplex flush receptacle with spring coverFSK-1VDRFSK-1VDR-AFor external operation of tumbler switches with squarehandlesFSK-1VTSCNFSK-1VTSACNOperating type for square handle tumbler or toggle switchesFSK-1VSCNFSK-1VS-ACNNeoprene – for use with castFS-GKR-1NFS-GKR-1N—FittingsGasket — ReplacementCast Covers Only — Furnished with stainless steel screws less gasketFSK-1DR-CCN—For round flush receptacles.Hole dia. 1-7/16"FSK-1R-ZCN—For square handle toggle switchesFSK-1TS-CCN—For square handle toggle switches (with protecting guard)FSA-1TSG-CCNFittings: Cast Device BoxesFor standard 2 or 3 wire duplex receptaclesFSK-1TSG-CACNV CSA Certification Only.Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 201083
FS and FD Receptacle Covers and Plugs for Single Gang Device Boxes VCSA Certification Only. Weatherproof, Raintight and Dust-tightCovers for Ridge Top Boxes.Catalog NumberReceptaclePlugPole/WireReceptaclesMalleable IronAluminumRidge TopRidge TopPlugReceptacle cover has threaded aluminum cap. Plug has neoprene boot and aluminum fastening ring. Furnished with receptacle, neoprene gasket, stainless steelscrews.Non-Locking, “U” Shaped Grounding Type — Receptacle takes “U” shaped or round grounding contact plugs15 Amp, 125VNEMA 5-15RNEMA 5-15P2P, 3WFSK5-15FSK5-15-AFSWP5-15NEMA 5-20P2P, 3WFSK5-20 †FSK5-20-A †FSWP5-20NEMA 6-15P2P, 3WFSK6-15FSK6-15-AFSWP6-15NEMA 6-20P2P, 3WFSK6-20 ‡FSK6-20-AFSWP6-20NEMA L5-15P2P, 3WFSKL5-15FSWPL5-15NEMA L6-15P2P, 3WFSKL6-15FSWPL6-15NEMA L7-15P2P, 3WFSKL7-15FSWPL7-1520 Amp, 125VNEMA 5-20R15 Amp, 250VNEMA 6-15R20 Amp, 250VFittingsNEMA 6-20RLocking Grounding Type15 Amp, 125VNEMA L5-15RFittings: Cast Device Boxes15 Amp, 250VNEMA L6-15R15 Amp, 277VNEMA L7-15R† Also takes FSWP5-15 Plugs.‡ Also takes FSWP6-15 Plugs.V CSA Certification Only.84Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 2010
FS and FD Two Gang Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.Gray IronCatalog 3/4Deep11/2 - 3/4ShallowAluminumCatalog NumberWt. 1.41FSD-212 *2.70/1.22ShallowShallowDeepShallowDeepShallowWt. C-32A1.03/0.47FSD-212A *0.90/0.41FittingsDimensions in Inches/Millimeters4.63/117.63.75/95.3Fittings: Cast Device Boxes3.28/83.34.31/3.25/ 109.582.61.81/47.8FS & FD Two-Gang DevicesDHub 31.82.00/50.82.75/69.92.31/58.7* Hubs at top of illustration are 1/2”.V CSA Certification Only.Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 201085
FS and FD Two Gang Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC.DescriptionCatalog NumberWt. Lbs./Kgs.Per 100Fittings: Cast Device BoxesFittingsTwo Gang CoversBlank Cover, Steel – Zinc ElectroplateFS-42 *20.00/9.07Round Receptacle Cover, Steel – Zinc ElectroplateHole dia. 1-7/16"FS-52 *18.00/8.16Duplex Receptacle Cover, Steel-Zinc ElectroplateFS-62 *15.00/6.80Tumbler Switch Cover, Steel –Zinc ElectroplateFS-92 *20.00/9.07Combination Duplex Receptacle and Tumbler SwitchCover, Steel - Zinc ElectroplateFS-69 *15.00/6.80Combination Duplex Receptacle and Single Receptacle,Steel - Zinc ElectroplateFS-65 *15.00/6.80Blank Cover, Gray IronFS-200G *56.00/25.40For external operation of tumbler switches with squarehandlesFSK-2VTS250.00/113.40Neoprene - for use with 2-gang cast covers aboveFS-GKR-2NWeatherproof CoversGasket — Replacement—* Available in Aluminum: Add suffix -A to catalog number.V CSA Certification Only.86Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 2010
FS and FD Three Gang Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.Gray IronCatalog Number Wt. Lbs./Kgs.SizeAluminumCatalog NumberWt. Lbs./Kgs.FS Three Gang ptionWt. Lbs./Kgs.Per 100Catalog NumberThree Gang CoversDuplex Receptacle Cover, Steel – Zinc ElectroplateFS-63 *23.00/10.43Tumbler Switch, Steel –Zinc ElectroplateFS-93 *25.00/11.34Blank Cover, Gray IronFS-300G *120.00/54.43For external operation of tumbler or toggle switches withsquare handlesFSK-3VTS330.00/149.69Weatherproof 7.8Hub 0/50.82.75/69.92.19/55.63.25/ 4.31/82.6 109.5Three Gang Devices* Available in Aluminum: Add suffix -A to catalog number.V CSA Certification Only.Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 201087Fittings: Cast Device BoxesDimensions in Inches/Millimeters
FS and FD Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.FeaturesStandard Finishes Thick wall on all four sides.Drill and tap anywhere on sidewalls.Ground screw at top of box for easy access.Two exterior mounting lugs.Fits standard sheet metal device covers with four mountingholes. Weatherproof when used with gasketed cast weatherproofdevice covers. Malleable iron: triple-coat — (1) zinc electroplate, (2) chromate,and (3) aluminum polymer enamel Aluminum: epoxy powder coatReference Data When ordering drilled and tapped openings or brazed hubs forblank bodies, refer to FS and FD Cast Device Boxes Drilling andTapping Information V page.Standard Materials Malleable iron or copperfree (4/10 of 1% max.) aluminumCatalog NumberDescriptionGray IronAluminumFDO Unilets with Lugs: FD depth 2-19/32" — Maximum hub size 1-1/2" threaded, and 1-1/4" no-thread or tings: Cast Device BoxesFittingsSingle-GangFD Unilets with Lugs: FD depth 2.69" — Takes single gang coversV CSA Certification Only.88Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 2010
FS and FD Cast Device Boxes VCSA Certification Only.UNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.Dimensions in Inches/MillimetersSpacing for Multi-Gang Boxes1.81/46.0#10-24 UNC-2B 1 /73.20.16/4.10.06/0.16/ 1.54.10.89/0.13/ .20.13/3.30.13/#6-32 UNC-2B “F” Holes : Cast Device BoxesNo. of GangsFittingsFDO 75/146.16–32THRD.9.44/239.813.13/333.5FD Unilets with LugsV CSA Certification Only.Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 201089
FS and FD Cast Device Boxes Drilling and Tapping Information VCSA Certification Only. Malleable Iron, AluminumUNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.Hub InformationListed below are the various types of brazed hubs which may beused with the FD Unilets and the FDO box. Threaded, no-threadand union hubs may be brazed at any desired location.It is possible to place more than five hubs on the top and bottom ofthree and four-gang Unilets.Look at the chart below for the maximum hub diameter and theminimum hub spacing distance. This chart, together with the Uniletdimensions will enable you to figure the maximum number of hubswhich may be used.The hubs will be symmetrically placed about the axis of the Uniletsunless exact dimensions are specified on the order.SizeFittings: Cast Device BoxesFittingsMaximum Hub SizeMaximum HubDiameterMaximum DistanceBetween ConduitCentersThreaded forRigid ConduitNo Thread forRigid ConduitNo Thread forElectrical Metallic 1/42-1/82-29/322-1/82-29/321-1/22-3/8———V CSA Certification Only.90Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 2010
FS and FD Cast Device Boxes Drilling and Tapping Information VCSA Certification Only. Malleable Iron, AluminumUNILETS for use with Threaded Rigid Conduit and IMC. All device boxes have ridge top construction.Ordering DataSymbol TableTo determine the catalog numbers of Unilets with drilled andtapped entries or hubs, the following information should beshown:1. Unilet catalog number.2. Sketch number of entry arrangement selected fromillustrations below.3. Entry symbols taken from the table right. Start from the left onthe top of the Unilet and continue in rotation clockwise aroundits body. Where no entry is required, the symbol X should beinserted. The three various divisions of the catalog numbershould be separated by dashes.Hub Size(inches)Brazed Threaded HubSymbolBlankXX1/21AOrdering Example:The Unilet selected is an FDO4 and the entry arrangement issketch number 12. Entry A, B and C are to be 1/2" drilled andtapped for rigid conduit; D is to be a 1" hub and there is noentry at location E. The catalog number will be as followsFDO4-12-111CX.Brazed UnionHub Symbol3/42B13C1-1/44D1-1/25E26FSingle, Two, Three and Four-Gang — Front view and oriented as mountedAA TOPSIDESBAACB12A3AABCEFGDEF567A B CA B C DA HG14A B CA B CCDJF13HEDF E DG F E16171819202122A B CA B C DA B C DA B C DA BCDEABCDEA BCDEKJDEH G F23KFE24EMLEFJ H G FK J H G2526MGF27FONFGL KJ HGML K J H2829V CSA Certification Only.Visit our website at www.appletonelec.com or contact us at (800) 621-1506. September 201091Fittings: Cast Device BoxesDA B C DBCCA B CFittingsBOTTOMB
FSK-1VTSCN FSK-1VTSACN Operating type for square handle tumbler or toggle switches FSK-1VSCN FSK-1VS-ACN Gasket — Replacement Neoprene – for use with cast FS-GKR-1N FS-GKR-1N Cast Covers Only — Furnished with stainless steel screws less gasket For standard 2 or
Metallography and Microstructures of Cast Iron Janina M. Radzikowska, The Foundry Research Institute, Krako w, Poland CAST IRON is an iron-carbon cast alloy with other elements that is made by remelting pig iron, scrap, and other additions. For differentia-tion from steel and cast steel, cast iron is defined
examines the requirements of LEED v4 for BD C: New Construction and its relevance to cast stone. THE USE OF CAST STONE . Cast stone is used primarily on the exterior of buildings. Cast stone veneer may be used alone or as an integral part of a clay or concrete masonry veneer. Cast stone may also be used as an accent or trim material on the .
o. c. keckley company 3400 cleveland street p.o. box 67 skokie, illinois 60076 5 duplex strainers flanged style body diverter dpxf cast iron-125 lb. bronze wdpxf cast iron-125 lb. iron cdpxf cast iron-125 lb. stainless steel bdpxf cast bronze-150 lb. bronze sdpxf cast carbon steel-150 lb. bronze scdpxf cast carbon steel-150 lb. stainless steel
DIR-330 A1 Device 6-18-2016 DIR-130 A1 Device 6-18-2016. DFE-690TXD A4 Device 6-8-2016 DFE-538TX F2 Device 6-8-2016 DFE-528TX E2 Device 6-8-2016 DXS-3250E A1 Device 5-31-2016 DXS-3250 A1 Device 5-31-2016 DXS-3227P A1 Device 5-31-2016 DXS-3227 A1 Device 5-31-2016 DEM-411T A1 Device 5-31-2016
Since there are limitation of the mechanical properties of gray cast iron such as hardness, tensile strength and others so, the white cast iron is needed. The mechanical properties of white cast iron is better than grey cast iron in order to produce something that need strength and ability to against the large force exerted on it.
price list cast iron soil pipe products 3 2 4-11 cast iron hubless soil fittings price list sppl.07.02 effective: march 1, 2007 terms and conditions cast iron hubless soil pipe 11 12 12-15 15 cast iron standard & heavy duty couplings cast iron service weight (hub & spigot) soil pipeFile Size: 1MBPage Count: 17
the more recognized foundries for cast iron cookware. Cast iron cookware from these manufacturers is some of the hottest items in the antiques and collectibles market today. In many West Virginia families the cast iron skillet is a treasured heirloom passed down from generation to generation. Since cast iron cookware is now
Iron, Fe Remainder 2.2. As-Cast Gray Cast Iron The original microstructure of the as-cast GI is shown in Figure1. The main components in the matrix were graphite flakes, ferrite, and pearlite. Metals 2019, 9, x FOR PEER REVIEW 3 of 14 Figure 2. Table 1. Alloy content for gray cast iron. Elements Percentage Carbon, C 3.53% Silicon, Si 2.71%
