Routing Stair Stringers With The MFS
No. 613Routing stair stringers withthe MFSADescriptionTime and time again carpenters have to make individual stairs and as aresult create complex routing templates.In this application example a solution is presented which permits maximumflexibility and can be adjusted simply to the required dimensions.613/011/5
BTools/AccessoriesDesignationOrder No.OF 2200 EB Plus574260LA-OF 2200 D36 CT494675Groove cutter with diameter corresponding to the later corner radiusof the steps.(A 12 mm spiral groove cutter is used in the example.)492655CTM series mobile dust extractor613/02CT-ASA orCT-ASA/SB492452492767Suction hose D 36 x 3.5 m AS (recommended)452882Multirouting template MFS 400or MFS 700492610492611Lever clamp EHZ 160491594Extension profile MFS-VP 400or 700 for the parallel cutter of steps and stud board grooves492723492724Vacuum clamping set VAC SYS SE 1 Vacuum clamping set VAC SYS SE 2 SE 1 712223SE 2 613/06613/092/5
CPreparation/Set-upIn the example an open work stair stringer without a stud board is routedusing the multirouting template MFS.613/11The stair stringer should be positioned securely and clamped - the Festoolvacuum clamping system is ideal for this. This makes possible damage-freeclamping and above all movement of the MFS without any annoying clampson the stringer.613/12EProcedureFirst the stair stringer is marked subject to the stair suitability and the stepdepth. Fig. 613/13613/13Then the MFS is set. The template must be adjusted by the diameter difference of the copying ring and the length and width of the cutter used must begreater than the step cross-section used.613/143/5
For example: Depth of step 264 mmThickness of step 42 mmCopying ring diameter 24 mmCutter diameter 12 mmMFS setting: 1.) 264 mm (24 mm-12 mm) 276 mm2.) 42 mm (24 mm-12 mm) 54 mm613/15The try squares supplied can be fitted at straight stair stringers, at whichthe template can be moved to the next cutting position.613/16After the cutter is fitted the desired routing depth is set, the copying ringinserted and the contour of the template transferred to the stair stringers.If one begins with the left stair stringer for example, the template must bepositioned as a mirror image for the right stair stringer and the try squarerealigned.613/17After the cutting work the steps are assembled as a test.613/18Tip: The cutter diameter can be selected so that it corresponds to the latercorner radius of the steps.For example: Corner radius R 8mmGroove cutter used D 16 mm613/194/5
Tip: By the addition of a pair of extension profiles the MFS can be fitted sothat the steps and stud board can be routed in one setting.613/20Especially for open work stairs, which also may have a vertical stud board,the manufacture of a template is very tedious.Using the multirouting template MFS, stair stringers can be manufacturedeasily using every router.The user sees the biggest benefit when the entire FESTOOL system is used.613/21Our example for use is a recommendation tried and tested in practice. However theactual conditions pertaining in each situation are completely outside of our control.We therefore do not provide any form of guarantee. Any legal claims arising out ofthis are not to be made against Festool. Please observe without fail the safety andoperating instructions included with the product.www.festool.com5/5
Multirouting template MFS 400 or MFS 700 492610 492611 Lever clamp EHZ 160 491594 Extension profile MFS-VP 400 or 700 for the parallel cutter of steps and stud board grooves 492723 . The stair stringer should be positioned securely and clamped - the Festool vacuum clamping
May 02, 2018 · D. Program Evaluation ͟The organization has provided a description of the framework for how each program will be evaluated. The framework should include all the elements below: ͟The evaluation methods are cost-effective for the organization ͟Quantitative and qualitative data is being collected (at Basics tier, data collection must have begun)
Silat is a combative art of self-defense and survival rooted from Matay archipelago. It was traced at thé early of Langkasuka Kingdom (2nd century CE) till thé reign of Melaka (Malaysia) Sultanate era (13th century). Silat has now evolved to become part of social culture and tradition with thé appearance of a fine physical and spiritual .
On an exceptional basis, Member States may request UNESCO to provide thé candidates with access to thé platform so they can complète thé form by themselves. Thèse requests must be addressed to esd rize unesco. or by 15 A ril 2021 UNESCO will provide thé nomineewith accessto thé platform via their émail address.
̶The leading indicator of employee engagement is based on the quality of the relationship between employee and supervisor Empower your managers! ̶Help them understand the impact on the organization ̶Share important changes, plan options, tasks, and deadlines ̶Provide key messages and talking points ̶Prepare them to answer employee questions
Dr. Sunita Bharatwal** Dr. Pawan Garga*** Abstract Customer satisfaction is derived from thè functionalities and values, a product or Service can provide. The current study aims to segregate thè dimensions of ordine Service quality and gather insights on its impact on web shopping. The trends of purchases have
INSTALLATION INSTRUCTIONS and TECHNICAL DATA Distinct Designs RUBBER STAIR TREADS, RISERS & STRINGERS TECHNICAL DATA ASTM F2169 – Resilient Stair Treads: Type TS, Class 1 & 2, Group 1 & 2, Grade 1 ASTM E648 (NFPA 253) - Critical Radiant Flux: Class I, 0.45 W/cm2 ASTM E662 (NFPA 258) - Smoke Density: Passes, 450 CAN/ULC-S102.2 - Surface Burning: Flame Spread Rating (FSR) 115, Smoke .
Stair Systems 4 Stair and Landing Styles 5 Rail Systems 6 Rail Styles 7 Pacific Stair Difference 8 Pacific Stair Value Add 9 Pacific Stair Corporation is an Approved Fabricator of the American Institute of Steel C
4. Snap baluster spacer into bottom stair rail and lay bottom stair rail on top of the deckboard 5. Use the lower and upper stair post to set the length of the bottom stair rail. Ensure that baluster spacer holes are spaced evenly between posts. Also allow for a minimum of 1-1/2" (292 mm) at each end of the stair rail for bracket
