Anchor Devices - Ferno
70Anchor DevicesAnchors areliterally thefoundation ofmodern rescuetechniques. Since every rescuepresents new challenges, ouranchor products are quick andintuitive to use, but as versatileand adaptable as possible, soprofessionals can set secureanchor points and get on withthe business at hand.The Arizona Vortex providesan artificial high-directionalfor easier edge transitions,increasing both safety andefficiency. We’ve recentlyupdated several of our mostpopular anchor strap productsto incorporate some of ourlatest ideas, which makequickly setting secure anchorseven simpler.www.cmcrescue.com
71cmc rescue 800-235-5741 805-562-9120Rope & WebPersonal GearAuxiliary EquipmentPatient Care & TransportSystems & KitsBags & PacksOriginally developed in the desert mountains of northern Arizona, the Arizona Vortex design stemsfrom expertise gained over years of working with wooden timber frame artificial high directionalsconstructed for vertical rescue work. Initial development work was done under the direction ofReed Thorne. The first metal prototype of the Arizona Vortex was an easel-style A-frame,welded together from square steel tubing and plate. Although heavy and cumbersome,it provided a test bed for proving and refining the design. The next step was theconstruction of an aluminum prototype. It was tested extensively in Ropes ThatRescue rigging seminars before the next prototype was made. The final designfurther refined the legs’ adjusting system and introduced the versatileraptor foot, named for its claw-like appearance.Anchor DevicesArizona VortexHardwareHarnessesARizonA VoRTEx ANCHOR DEVICES
72ANCHOR DEVICES ARizonA VoRTExArizona VortexUL Classified to NFPA 1983 – General UseEN 795USAThe father of all portable anchor/high directional systems, the Arizona Vortex is a tripod, bipodand monopod in one all-inclusive kit. Its two-piece head can be rigged as a standard tripod or,in advanced applications, as an A-frame, a sideways A-frame, or a gin pole. The tripod canbe formed into an easel A-frame with adjustable leg lengths. The versatile third leg allowsrescuers to set up an artificial high directional in virtually any urban, industrial, or wildernesslocation. On A-frame and easel A-frame applications, pulleys can be attached directly intothe Head Set without carabiners, eliminating lost headspace and working clearance.This feature makes the Vortex ideal for use with high lines and tracking line offsets.The extra attachment points also work well for rope access where several lines maybe needed over the edge. Raptor and flat foot sets are both included to provide asecure footing on varying terrain. Also included: bright colored flags that can beattached to pins to increase visibility and an 18 kN MBS cord for securing thelegs. The kit provides a complete solution, so you’ll have what you need withoutrequiring optional extras. Manufactured in the USA by Rock Exotica.Both versions come complete with:Flat Feet (3)Head Set (1)Raptor Feet (3)Head Set Pulley Wheel (1)Feet Bags (2)Head Pins (4)Pin Bag (1)Head Bag (1)Pin Flags (15)Upper Legs (3)8 mm CordLower Legs (7)– 40 Ft. (12 m) (1)Leg Pins (11)InstructionManual (1)Leg Bagsw/ Shoulder Straps (4)specifications:Inside height: 9 ft. (2.7 m)Height with additional legs: 12 ft. (3.7 m)Shipping weight (with both sets of feet): 95 lbs. (43 kg)Item #Color727300Blue, Orange, Brite727305BlackArizona Vortex AccessoriesItem #Description (Color)727240Replacement Pin Set (2 head pins, 4 leg pins)727030Upper Leg (Brite)727040Lower Leg (Brite)727090Head Set Pulley WheelNote: Two additional legs can be used to assemble the vortex as a 12-ft. tripod. More thanthree lower leg sections per leg is not recommended.www.cmcrescue.comLighter, smaller head set milled from solidblocks of high-strength aluminumTwo-piece head set can be used as atripod, bipod, or monopod (gin pole)Two independent artificial highdirectionals can be made from one unitLighter, shorter leg sections (without lossof tripod height) are easier to transportIdeal for rope access work—much morethan just a rescue tripodAll Vortex A-frame heads are proof loadedto 23 kN
ConfigurationsAnchor DevicesTripod – The most stableconfiguration features anarticulating third leg, whichallows the head to be movedcloser to an edge than aconventional tripodBags & PacksBipod – offers good stabilityin one direction, but mustbe securely guyed. It can bepositioned square or sidewaysto the direction of the loadSystems & KitsGin Pole – This least stableconfiguration requires secureguying, but may be the onlychoice when there is onlyroom for one legPulley Mount – Pulleys can be mounteddirectly into the head, eliminating the heightlost when a carabiner is used as a connectorHead Set Pulley Wheel – This integral partmounts into the head set with a pin to allowmaximum height adjustment and eliminatethe need for additional hardwareAdvanced skills, Training and safetyWhile tripods are inherently stable under most conditions, A-frames (bipods) and gin poles(monopods) are not. Improper rigging puts subjects and rescuers at risk. A knowledge of advancedrigging and complex guying systems is essential to safely set up A-frames and gin poles. As with allrescue techniques, and particularly where advanced skills are involved, CMC urges professional leveltraining. Training specific to the use of the Arizona Vortex is available from CMC Rescue School andRopes That Rescue, Ltd.CMC Rescue School: Custom courses taught at your location. Contact us at www.cmcrescue.comor call 800-235-5741 for specific course information.Ropes That Rescue, Ltd.: Courses taught in Northern Arizona, around the country, or at yourlocation. Contact Ropes That Rescue, Ltd. at www.ropesthatrescue.com for more information.cmc rescue 800-235-5741 805-562-9120Personal GearColor Coding – Top and bottom sectionsof the legs are colored differently to aid inassembly, and the two parts of the headalso come in different colors for quickidentificationAuxiliary EquipmentPatient Care & TransportKey Benefits:Telescoping Legs – The top legs telescopeinside the lower legs and slide through thehead to allow adjustment of both the overallheight or just the height of a single legHarnessesRope & WebThe Original Multipod:An Industry StandardProven Around the World73HardwareARizonA VoRTEx ANCHOR DEVICES
74ANCHOR DEVICES TRiPodS & WinCHESDBI/SalaAluminum TripodThis aluminum tripod, features two head-mounted pulleys to save valuable vertical space, increasing the working height of the tripod. Equippedwith a quick-mount bracket for a DBI/Sala winch or SRL and safetychains, the legs are adjustable and lock into place, making the tripodeasier to set up. Fitted rubber safety shoes with spiked edges provideslip-free footing. Two eyebolt anchorage points are included. The ratedworking load is 350 lbs. (159 kg) for work support and 310 lbs. (141 kg)for fall arrest. Maximum height to eyebolt is 9 ft. (2.7 m). Minimum heightis 7 ft. (2.1 m). Storage Length: 8.5 ft. (2.6 m). Weight: 56 lbs. (25.4 kg).Item #Description390010Aluminum Tripod, 9 ft. (2.7 m)393095Tripod Carrying Bag, 9 ft. (2.7 m)DBI/SalaSealedSRLSealed FallProtectionand Rescue DeviceThis self-retracting lifeline (SRL)mounts to your tripod to providefall arrest capability as well asemergency retrieval. By simplyturning the handle the attendantcan raise or lower an injured person. Incorporating a revolutionary newconcept, where the dynamic components are environmentally sealed, thissealed SRL isolates the motor spring, brake, and other components fromforeign elements, thereby increasing its reliability exponentially. The safetyhook on the 50 ft. (15-m) long 3/16-in. (4.8-mm) stainless steel cablehas a visual overload indicator. A quick-mount bracket and carrying bagare included. Rated maximum capacity: 310 lbs. (141 kg).Item #Weight39010842 lbs. (19 kg)www.cmcrescue.comDBI/SalaSalalift IIWinchLightweightWork Supportand Rescue WinchThis second-generation winch provides superior performance anddurability, and can be used to raise or lower a worker and to rescue orevacuate an injured victim. The free wheel allows quick delivery of theline for a worker descending a ladder. Its 6:1 gear ratio delivers anaverage lifting speed of 12.75 ft./min. (3.9 m/min). With the 25:1mechanical advantage, only 12 lbs. (5.4 kg) of force is required to lift a310-lb. (141-kg) load. The safety hook on the stainless steel cable has avisual overload indicator, and an overload clutch provides added safety. Aquick-mount bracket and carrying bag are included. Rated maximumcapacity: 350 lbs. (159 kg).Item #Cable Length/DiameterWeight39200360 ft. (18.3 m)/1/4-in. (6.3 mm)36 lbs. (16.3 kg)39201190 ft. (27.4 m)/3/16-in. (4.8 mm)35 lbs. (15.9 kg)392007120 ft. (36.6 m)/3/16-in. (4.8 mm)37 lbs. (16.8 kg)
Height:98 in. (249 cm)102 in. (259 cm)107 in. (272 cm)Strength:42 kN (9,500 lbf.)37 kN (8,500 lbf.)33 kN (7,500 lbf.)Height:112 in. (284 cm)115 in. (292 cm)119 in. (302 cm)Item #DescriptionLeg ExtensionWeight757000Tripod100 in. (254 cm)74 lbs. (33.6 kg)757010Carrying BagSkyHook WinchStrength:31 kN (7,000 lbf.)26 kN (6,000 lbf.)23 kN (5,280 lbf.)Sked TripodWinch BracketUSASkyHook Basic Winch – A single-handled lightweightcousin to the original SkyHook Rope Rescue Winch, the21-lb. Basic model features the same AC power optionsas the original. This model, which incorporates years offield improvements and material upgrades, hosts a drybearing package and provides 2.2:1 and 6:1 gear ratios.It can be manually operated or accepts the Makita/SkyHook 110 volt AC 10 amp Power Head for a fullrange of rescue, industrial or inspection operations. USABasic ModelSkyHook TrailTech Winch – A double-handledside-mounted rope winch that can be used with severaltripod models, the 16.5-lb. TrailTech model incorporatesa self-tailing mechanism. This allows a single operatorto use both hands to crank the opposing handles, whichnot only delivers the most ergonomic manual powerstroke available, but also improves efficiency by 50% ormore. The mechanical advantage of the TrailTech allowsthe operator to switch from 2.2:1 (low gear) to 6:1 (highgear) by simply changing the rotation of the handlesfrom clockwise to counterclockwise.Connects DBI/SalaSalalift II Winch or SRLto a Sked-EVAC Tripod.Weight: 5 lbs. 3 oz.(2.4 kg)Item #300410TrailTech ModelItem #ModelWeight732001Basic21 lbs. (9.5 kg)732022TrialTech16.5 lbs. (7.85 kg)cmc rescue 800-235-5741 805-562-9120HardwareRope & WebAnchor DevicesThese proof loads are from independent, third-party testing and determine therepeatable load rating (not the ultimate breaking strength) for the Sked-EVAC Tripod.Bags & Packssked-eVAc Tripod Proof LoadsSystems & KitsManufactured by Skedco, makers of the Sked Stretcher, the Sked-EVAC tripod features aircraft-grade,gold-anodized aluminum legs and a cast-aluminum head. Three heavy-duty rigging anchors, locatedin the center, have exceptionally large holes for easy attachment. Legs adjust in 5-in. (127-mm)increments for a maximum height of 10 feet (3 m) and a minimum length for transport of 7 feet (2.1 m).The cast ladder feet swivel and come with a choice of a sure-grip rubber pad or a point for imbeddingin a soft or slippery surface. Holes in the feet allow the tripod to be bolted into position. A safety chainprevents leg movement and adjusts with a screw link.Patient Care & TransportUSAAuxiliary EquipmentSked-EVAC Industrial TripodHarnesses75Personal GearTRiPodS & WinCHES ANCHOR DEVICES
ANCHOR DEVICES76 lAnyARdS & TETHERSAzzard Tower Climbing ConnectorUSAReed Thorne of Ropes That Rescue designed this connector to performas a quick, one-handed attachment to a structure for maximum safetywhen placing belay protection. It provides quick connections to towersand other structures when protecting an ascent using a lead-climbingtechnique. The custom-designed aluminum ring reduces weight andprovides a wide, smooth-bearing surface for the rope. The 1-in. (25 mm)web has red wear indicators for easy inspection. The double-lockingcarabiner gate can be opened with one hand. Exceeds OSHA minimumstrength requirement of 22.2 kN (5,000 lbf.) for anchorage connectors.Pulley not includedItem #LengthWeight20182824 in. (61 cm)9 oz. (255 g)20182930 in. (76 cm)9 oz. (255 g)201830Delta 30 in. (76 cm)9 oz. (255 g)Bypass LanyardFeaturing LightweightAluminum Snap HooksUSAYou can maintain fall protection while climbing ortraversing structures with our Bypass Lanyard. One snaphook remains secure, while the second is moved to thenext step. Each side is an arm’s reach long. Snap hooksare double acting, but can be opened with one hand.An oval screw link is used as the waist connector forminimum bulk and maximum security.Item #Overall LengthStrength RatingWeight30101028 in. (71 cm)22.2 kN (5,000 lbf.)3 lbs. (1.4 kg)NEW! Tactical TetherUSANEW! Water Rescue TetherUSADesigned for special opspersonnel, this tacticaltether connects the wearerto an anchor point in anaircraft or an edge. Madefrom 1-in. tubular web withan internal built-in bungee,the Tactical Tether retreatsas needed to stay out of the way. Girth hitch to attach the loop end to yourharness and connect the other end to the anchor of your choice. Sewn to ablack double-locking connector.This strong tether, madefrom 1-in. tubular webwith a built-in bungee,works as a “live bait”water rescue attachmentto your PFD. As aconnection between aPFD and a line, thetether enhances attachment options in rescue situations. Sewnto a brite double-locking connector.Item #ColorExtended LengthWeightItem #ColorExtended LengthWeight201705Black46 in. (120 cm)6.8 oz. (193 g)201707Yellow46 in. (120 cm)7.5 oz. (213 g)www.cmcrescue.com
DBI/SalaWristletsFor rescue or retrieval by connecting to thepatient’s wrists.DBI/Sala E-Z Stop IITie-Back LanyardItem #Meets applicable OSHA and ANSI Z359.1 RequirementsDBI /SalaAdjustableLanyardThis shock-absorbing lanyardeliminates the need for a separateanchorage connector. Its 1-inch(25 mm) polyester web has atubular outer layer for abrasionresistance. Self-locking snaps atboth ends provide security. Thesliding D-ring allows the lanyardto be choked off.391220Meets applicable OSHA and ANSIZ359.1 RequirementsItem #LengthWeight3901066 ft. (1.8 m)2 lbs. 11 oz. (1.2 kg)DBI/Sala E-Z Stop IIShock AbsorberMeets applicable OSHA and ANSI Z359.1 RequirementsDesigned to meet the needs of the wide varietyof anchor points used for technical rescue andrope access work, this special version of DBI/Sala’s EZ Stop II Shock Absorber has loops oneach end that can be connected to carabiners.When used with carabiners that meet the OSHAand ANSI requirements, the shock absorber isalso compliant. Maximum elongation: 42 in. (107cm). Maximum arresting force: 4 kN (900 lbf.). Capacity: 310 lbs. (141 kg).Item #LengthWeight39036412 in. (30 cm)9.7 oz. (275 g)This lanyard has self-locking snaps at eachend and can be adjusted from 4 to 8 ft. (1.2 to2.4 m). Its 1-in. (25 mm) polyester web has abuilt-in wear indicator.Item #Weight3900162 lbs. (907 g)cmc rescue 800-235-5741 805-562-9120Bags & Packs3 lbs. 5 oz. (1.5 kg)Systems & KitsWeight390482Patient Care & TransportItem #Auxiliary EquipmentThis shock-absorbing lanyard, which retracts automatically to fit the working area, uses aninternal spring to retract and expand from 2-1/2 to 6 ft. (0.8 to 1.8 m), operating smoothlywithout any lock-ups. Its anchor end has a DBI/Sala flat steel rebar hook with a 2-1/2 in.(63.5 mm) gate opening.Anchor DevicesRope & WebHardwareA Unique Alternative to Elasticized LanyardsPersonal GearDBI/Sala E-Z Stop RETRAX Lanyard77HarnesseslAnyARdS & WRiSTlETS ANCHOR DEVICES
78ANCHOR DEVICES STRAPSNEW!FastLink Anchor StrapsThe Fastest Connecting Anchor Strap Solution Available!UL Classified to NFPA 1983 – General UseUSAStandard anchor straps with D-rings on each end can createtri-axial loading on the connecting carabiner. A delta screw linkconnecting the two ends of the strap eliminates this hazard, butscrew links are slow to fasten and add weight. We’ve eliminatedthe D-rings and solved both problems with this new design. Simplywrap the strap around the anchor point and clip the integratedProTech Auto-Lock Carabiner into the included 12 mm DeltaQuick Link, and you’re ready to connect your system.Item #ColorSizestrength specificationspecifications for All sizes:Basket (U) Configuration: 52 kN (11,690 lbf.)End-to-End Configuration: 24 kN (5,395 lbf.)Choker Configuration: Not ApplicableLengthWeight201062BlueSmall3 ft (91 cm)1.27 lbs (576 g)201063BlueMedium5 ft (152 cm)1.58 lbs (711 g)201064BlueLarge7 ft (213 cm)1.82 lbs (825 g)201065BlueX-Large10 ft (305 cm)2.07 lbs (939 g)201066BlueXX-Large15 ft (457 cm)2.84 lbs (1.3 kg)www.cmcrescue.com
STRAPS ANCHOR DEVICES79NEW!HarnessesAnchor Strap SleeveUSA294032BlackSmall2 ft (61 cm)0.46 lbs (61 g)294033BlackMedium4 ft (122 cm)0.88 lbs (399 g)294034BlackLarge6 ft (183 cm)1.33 lbs (603 g)294035BlackX-Large9 ft (274 cm)1.98 lbs (898 g)IMPROVED!Anchor StrapsUL Classified to NFPA 1983 – General Usestrength specifications for All sizes:USAAnchor straps have a tough job, and see a lot of wear and tear. Over the years, we’velearned that cuts and abrasion are the greatest threats to their safety and service life. Todramatically increase both, our Anchor Straps now feature two layers of the same durablemil-spec nylon web. Sewn at CMC by the highly skilled workers who make our rescue harnesses, our Anchor Straps feature forged steel D-rings individually proof loaded and sizedfor easy choker (girth-hitch) configuration when desired. Use edge protection when appropriate,and observe safe carabiner-loading practices to maintain system strength.Basket (U) Configuration: 55 kN (12,364 lbf.)End-to-End Configuration: 26 kN (5,845 lbf.)Choker Configuration: 28 kN (6,294 lbf.)Item #ColorSizeLength201022BlueSmall3 ft. (91 cm)Weight.98 lbs. (444 g)201023BlueMedium5 ft. (152 cm)1.22 lbs. (553 g)201024BlueLarge7 ft. (213 cm)1.5 lbs. (680 g)201025BlueX-Large10 ft. (305 cm)1.89 lbs. (857 g)201026BlueXX-Large15 ft. (457 cm)2.55 lbs. (1.2 kg)Variable Anchor StrapUSAOur Variable Anchor Strap differs significantly in design and performance from other adjustableanchor straps. By using an additional length of web, it can handle a higher load before slipping. Itadjusts from 3 feet (91 cm) to 7 feet (213 cm). The D-ring on one end is larger so the other end canpass through, allowing the strap to be rigged in a choker (girth hitch) configuration.Item #ColorMBSWeight201020Blue22 kN (5,000 lbf.)1 lb. 12 oz. (794 g)201040Black22 kN (5,000 lbf.)1 lb. 12 oz. (794 g)cmc rescue 800-235-5741 805-562-9120Anchor DevicesWeightBags & PacksLengthSystems & KitsSizePatient Care & TransportColorAuxiliary EquipmentItem #Personal GearAnchor Strap not includedRope & WebHardwareMade from tough #4 duck canvas and a layer of Shelter-Rite vinyl, our Anchor Strap Sleeves protect anchor straps fromthe elements and surface abrasion, reducing wear and tearand increasing safety and servicelife. The pull string installation featureprovides simplicity for feeding strapsthrough the sleeve during initial strapinstallation and for regular inspections.Available in four sizes. (XL AnchorStrap Sleeve is for use on both our XL and XXL Anchor Straps).
80ANCHOR DEVICES AnCHoR PlATESTwenty years ago CMCintroduced the Anchor PlateAnchor Platesas a strong, lightweight, and compactcollection point for connecting a rescuesystem to an anchor. And that point is animportant feature. Over the years we’veseen a steady progression of “bigger, better”anchor and rigging plates with more andmore holes entering the market. But thebigger the plate, the less like a collectionpoint it becomes, increasing the potentialfor rotation of the plate, creating additionalsystem extension and shock-loading if anymovement or failure of an anchor occurs.In 20 years of use, we’ve not seen anoperational need for more holes, a largersize, or more weight.A Classic CMC InnovationUL Classified to NFPA 1983 – General UseA CMC original design that has withstood the test of time, ourAnchor Plates keep the carabiners holding the different parts ofyour rescue system from jamming together. The hardware becomes easierto see, making safety checks more accurate. It can also keep you fromclipping a carabiner into the wrong loop of the anchor web. For anchorsystems, it makes an excellent collection point. We use the Anchor Plate inCMC Rope Rescue classes, which allows our students to set up systemsfaster with fewer mistakes. Hole diameters: small – 7/8 in. (22 cm),large – 2 in. (51 cm).Item #Model3 MBSWeight300610Aluminum, Blue50 kN (11,240 lbf.)6 oz. (170 g)300615Stainless Steel49 kN (11,015 lbf.)8 oz. (227 g)Aluminum O-RingMicro-Anchor PlatesUSAUL Classified to NFPA 1983– General UseUsed in a wide variety of rigging applications, this small, strongconnection point is machined from high-strength aluminum barstock. Its rounded inner surface minimizes rope bend and allowssmooth movement of the rope.USAWhen weight and size are an issue,such as in mountain rescue and special operations packs, riverrescue gear bags, or rope access work, the ultra-compact, light,anodized aluminum Micro-Anchor Plate is the right choice. Thelarge hole acts as a collection point for multi-point anchors. Thesmall holes keep carabiners separated, making them easier towork with when the system is loaded, and the oblong shapemakes inserting carabiners easier and quicker. Hole diameters:small – 5/8 in. (16 mm), large – 1 in. (25 mm).Item #3 MBSWeight30062348 kN (10,790 lbf.)2 oz. (57 g)Item #Inside DiameterMBSWeight3029001-5/16 in. (33 mm)22.2 kN (5,000 lbf.)1 oz. (28 g)Steel O-RingWhen rigging a stretcher for a high line (Tyrolean), this dropforged alloy steel connection point allows you to attach controllines, a litter harness, and pulleys, all at one strong pointwithout twisting.Item #Bar DiameterInside Diameter MBS305011 1/2 in. (12.7 mm) 3 in. (76 mm)Weight44.5 kN (10,000 lbf.) 9 oz. (255 g)Maillon Rapide Quick LinksEN 362, EN 12275Quick Links are gaining popularity for use in situations for which carabiners are not recommended, such aswhen tri-axial loading cannot be avoided. The Delta shape can be used to rig anchors. The Delta and the HalfMoon can be used as a chest harness connector. While slower to open and close than a carabiner, they canbe more secure when tightened down — and they cost less.DeltaOvalItem #ShapeMaterialDiameterInside LengthWorking LoadBreaking Load382101DeltaGalvanized Steel10 mm2-5/8 in. (68 mm)8.8 kN (1,984 lbf.)45 kN (10,116 lbf.)382121DeltaGalvanized Steel12 mm3-3/16 in. (81 mm)10.8 kN (2,425 lbf.)55 kN (12,364 lbf.)383071OvalGalvanized Steel7 mm2-1/16 in. (52 mm)5.4 kN (1,213 lbf.)27 kN (6,060 lbf.)383121OvalGalvanized Steel12 mm3-3/16 in. (81 mm)14.7 kN (3,307 lbf.)61 kN (13,780 lbf.)384101Long OvalGalvanized Steel10 mm3-3/8 in. (86 mm)9.8 kN (2,205 lbf.)50 kN (11,240 lbf.)385951Half MoonGalvanized Steel9.5 mm2-11/16 in. (68 mm)9 kN (1,985 lbf.)45 kN (10,116 lbf.)386101RectangularGalvanized Steel10 mm2-11/16 in. (68 mm)8.8 kN (1,984 lbf.)45 kN (10,116 lbf.)www.cmcrescue.comHalf Moon
81HardwareHarnessesESCAPE & Roof ANCHOR DEVICESNEW!Rope & WebFlash HookAnchor DevicesUL Classified to NFPA 1983 –Light UsePatent PendingUSA3 MBSDimensionsWeight30098025 kN (5,620 lbf.)7 x 4.75 in. (18 x 12 cm)8 oz. (227 g)Patient Care & TransportItem #Systems & KitsBags & PacksOur Flash Hook escape anchor is the lightest certified modelavailable today, delivering outstanding strength with minimalweight. The advantage of the patented shape is that it providesa more secure attachment around structural lumber and overwindow ledges by directing the spine toward flat surfaces whenloaded. The slotted handle allows for girth hitching around largeranchor points. This escape anchor is made from a high-strengthaluminum alloy with an anodized finish. The captive eye providesgreater anchoring versatility and the 10-mm attachment holeaccepts most cord or web, making our Flash Hook the best choicefor personal escape.Roof AnchorUL Classified to NFPA 1983 – General UseUSAItem #Spike LengthClosed Dimensions3 MBSWeight3009905-3/4 in. (146 mm)10.5 x 3.5 in (267 x 89 mm)41 kN (9,217 lbf.)1 lb. 9 oz. (709 g)cmc rescue 800-235-5741 805-562-9120Personal GearAuxiliary EquipmentDesigned by firefighters, our Roof Anchor quickly provides a secure anchorpoint for roof operations. Set the anchor on the roof and hammer the 1/2-inch(12.7 mm) diameter spike into the surface. When not in use, the spike folds intothe handle for safe storage and transport. The Roof Anchor’s working strengthwill depend on the structural integrity of the surface, including any damagecaused by the spike. Because of the highly variable strength of roof materialsand difficulty in assessing this strength accurately, the use of a second RoofAnchor or multiple units should be standard protocol.
82Bags & PacksRescuers seemconstantly to bepacking, hauling orstoring their gear.Whether at the station, in avehicle, or on a harness, weunderstand the importanceof keeping things organized,safe, and ready to put intouse on short notice. We stillmake CMC bags in our ownshop in California, so we canbe involved in every step ofproduction. And becausewe also use these productsourselves, we choose thedesigns and materials based onwhat works best after years ofhard use, rather than the lowestpossible cost. We love to see20-year-old rope bags out inthe field, still doing the job theywere designed to do.www.cmcrescue.com
Auxiliary EquipmentPatient Care & TransportSystems & KitsBags & PacksAnchor DevicesRope & WebHardwarecmc rescue 800-235-5741 805-562-9120HarnessesBuilt Tough for Years of ServicePersonal GearBAGS & PACKS83
84BAGS & PACKS WHiTnEyWhitney PackUSANEW!Designed by rescuers for rescuers, this is the perfect SARready-pack to keep in your vehicle for your next call. Large enoughto carry gear and provisions to support you in the field for a full24 hours, the Whitney contains plenty of pockets and features tokeep everything well-organized. The dividable main compartmentadapts to fit larger items (like ropes) and can be accessed fromtop or bottom. Specially designed pockets fit an optional hydrationreservoir (sold separately), gloves, helmet, water bottles, webgear and sunglasses or goggles (in their own fleece-lined pocket).Additional features include: padded back with aluminum stays, fullyadjustable padded shoulder and waist straps with integrated gearloops, MOLLE, loop strip for name tags or other ID, reflective strips,and a strategically placed top carry handle with pass-throughsleeve. The pack is made from 500-denier CORDURA nylon;the padding features breathable D3 cloth for all-day comfort.The integral gear cache cloth is detachable, features four cornerhandles and doubles as a rain cover.The Whitney Pack comes with anintegrated detachable ground clothfor use in caching out equipment oras a rain cover.Equipment shown not includedwww.cmcrescue.comItem #ColorVolume440643Red2,800 ci (46 L)440649Coyote2,800 ci (46 L)
85HarnessesPAliSADE & CAmElbAK BAGS & PACKSHardwarePalisade PackUSANEW!1,750 ci (29 L)440639Coyote1,750 ci (29 L)CamelBak Max GearOmega ReservoirAdd 100 oz. (3 L) ofwater with the crackresistant CamelBak Omega Reservoir, featuring BigBite valve technology. Itswide mouth opening and rugged materials ensure thereliable delivery of water during extreme operationalsituations. The wide opening also makes filling andcleaning a simple task. HydroLock shuts off waterflow for added security, and there is an additional shutoff located at the bottom of the reservoir.Item #Patient Care & TransportVolumeRedAuxiliary EquipmentColor440633452112cmc rescue 800-235-5741 805-562-9120Personal GearItem #Systems & KitsBags & PacksAnchor DevicesRope & WebThis full-featured custom pack holds the essentials for quick-response operations orteam trainings, it also works as a great urban backpack. Many of the features of itsbig brother, the Whitney Pack, are included. Made of 500-denier CORDURA nylon,it's built to last with enough pockets to keep everything within easy reach. Organizeyour helmet, gloves, water bottle, eye protection, and other must-have gear inseparate pockets. Padded back and shoulder straps feature breathable D3 cloth, anda lightweight waist belt and sternum strap enhance comfort when loaded. A variety ofMOLLE and other external attachment points allow for the addition of extra gear. Anoptional hydration reservoir can be fully integrated into the pack.
86BAGS & PACKS RoPERope BagsMade from Extra Long-Life CORDURA Nylon for Bags that Last, and LastUSASolid performers for years, our popular Rope Bags feature a variety of innovative elements. Contoured backpack-style shoulder straps offer greater comfortwhen carrying a heavy bag. Bag tops are made of rugged pack cloth for easier closing. Handles, just inside the top, can be used to hold the bag open forquicker stuffing or to carry the bag from the top, haul-bag style. A soft rubber side-carrying handle is comfortable on the hand. The bottom of the bag has alarge grommet to pass the rope through, plus sewn web loops to tie the rope end off inside or outside of the bag. The #1 Rope Bag is all CORDURA nylonand features an external web handle.Item #ModelColorVolumeCapacity (1/2-in. Rope)Dimensions (Length x Diameter)430101#1Orange700 ci (11 L)50–120 ft. (15 –37 m)16 in. x 8 in. (41 x 20 cm)16 in. x 8 in. (41 x 20 cm)430102#1Blue700 ci (11 L)50 –120 ft. (15–37 m)430103#1Red700 ci (11 L)50 –120 ft. (15–37 m)16 in. x 8 in. (41 x 20 cm)430105#1Black700 ci (11 L)50 –120 ft. (15–37 m)16 in. x 8 in. (41 x 20 cm)430107#1Yellow700 ci (11 L)50–120 ft. (15 –37 m)16 in. x 8 in. (41 x 20 cm)30 in. x 9 in. (76 x 23 cm)430201#2Orange1,750 ci (29 L)150– 200 ft. (46–61 m)430202#2Blue1,750 ci (29 L)150– 200 ft. (46–61 m)30 in. x 9 in. (76 x 23 cm)430203#2Red1,750 ci (29 L)1
DBI/Sala Aluminum Tripod This aluminum tripod, features two head-mounted pulleys to save valu-able vertical space, increasing the working height of the tripod. Equipped with a quick-mount bracket for a DBI/Sala winch or SRL and safety chains, the legs are adjustable
For assistance or information, please contact your Ferno distributor. If you do not have a Ferno distributor, please contact Ferno Customer Relations: Ferno-Washington, Inc., 70 Weil Way Wilmington, Ohio 45177-9371, U.S.A. Telephone Country Code 1.937.382.1451 Fax Country Code 1.937.382.6569
The information disclosed in this manual is the property of Ferno Australia and Ferno-Washington, Inc., Wilmington, Ohio, USA. Ferno Australia and Ferno-Washington reserve all patent rights, proprietary design rights, manufacturing rights, reproduction u
For assistance or information, please contact your Ferno distributor. If you do not have a Ferno distributor, please contact your nearest Ferno Customer Services office. USA HEADQUARTERS Ferno-Washington, Inc., 70 Weil Way Wilmington, Ohio 45177-9371, U.S.A. Telephone Coun
0731371 Ferno Model 59-T EZ Glide Power Trax W/IV Holder, Locking Handles 7,882.00 000185ST Ferno StatTrac Cot Fastening System with Mounting Blocks "86 inch" 1,663.00 000185MT Ferno StatTrac Cot
The information disclosed in this manual is the property of Ferno-Washington, Inc., Wilmington, Ohio, USA. Ferno-Washington, Inc. reserves all patent rights, proprietary design rights, manufacturing rights, reproduction use rights, and sales use rights thereto, and to any article disclosed therein except to the extent those rights
The information disclosed in this manual is the property of Ferno-Washington, Inc., Wilmington, Ohio, USA. Ferno-Washington, Inc. reserves all patent rights, proprietary design rights, manufacturing rights, reproduction use rights, and sales use rights thereto, and to any article disclose
The information disclosed in this manual is the property of Ferno-Washington, Inc., Wilmington, Ohio, USA. Ferno-Washington, Inc. reserves all patent rights, proprietary design rights, manufacturing rights, reproduction use rights, and sales use rights thereto, and to any ar
The information disclosed in this manual is the property of Ferno-Washington, Inc., Wilmington, Ohio, USA. Ferno-Washington, Inc. reserves all patent rights, proprietary design rights, manufacturing rights, reproduction use rights, and sales use rights thereto, and to any ar
