FR-D720 – 008 – NA
D700 SeriesLow Cost Micro VFD with Mitsubishi Electric Quality.t Simple to Use: The D700 is perfect for a wide rangeof applicationst Simple to Set Up: The integrated digital setting dialwith display makes configuration fast and easyt Simple Operation: Control remotely or with thebuilt-in digital controlt Simple to Choose: Low cost and with MitsubishiElectric quality ensuring long operation lifet Capacity from 1/8 to 10 HPt Safety Stop function meets EN954-1 Category 3 andIEC60204-1 Stop Category 0t Integrated brake chopper circuitt Modbus RTU included as standard via the RJ45 portt 150% torque at 1Hz and 200% torque at 3Hz usingGeneral-purpose Magnetic Flux Vector Controlt Optimum Excitation Control for increased energysavings when motor is not loadedt Frequency Search Function for catching aspinning loadt Dancer Control allows position signal to controlroll tensiont Password Function for parameter setting protectiont Internal diagnostics function for monitoring statusof critical componentst RoHS compliantt 10 year maintenance free designVoltageFR-D720 – 008 – NASymbolD710WD720SD720D740Voltage ClassSingle-phase 115V classSingle-phase 240V classThree-phase 240V classThree-phase 480V classInverter capacityamperage / 10(008 0.8Aoutput)1151 Phase1/8 – 1 Hp2401 Phase1/8 – 3 Hp2403 Phase1/8 – 10 Hp4803 Phase1/2 – 10 HpHorsepowerD700 SeriesRating (CT & VT)HPRated AmpsIP20 Open ChassisDimensions in inches (mm)Model NumberHeightWidthDepthWeight Lbs (kg)Stocked Item1-Phase 100 120VAC Input / 3-Phase 200 240VAC Output1/80.8FR-D710W-008-NA5.0 (128)2.7 (68)3.2 (80.5)1.1 (0.5)S1/41.4FR-D710W-014-NA5.0 (128)2.7 (68)4.4 (110.5)1.3 (0.6)S1/22.5FR-D710W-025-NA5.0 (128)2.7 (68)5.6 (142.5)2.0 (0.9)S14.2FR-D710W-042-NA5.0 (128)4.3 (108)5.9 (149.5)3.1 (1.4)S1-Phase 200 240VAC Input / 3-Phase 200 240VAC Output1/80.8FR-D720S-008-NA5.0 (128)2.7 (68)3.2 (80.5)1.1 (0.5)S1/41.4FR-D720S-014-NA5.0 (128)2.7 (68)3.2 (80.5)1.3 (0.6)S1/22.5FR-D720S-025-NA5.0 (128)2.7 (68)5.6 (142.5)2.0 (0.9)S14.2FR-D720S-042-NA5.0 (128)2.7 (68)6.5 (162.5)2.5 (1.1)S27FR-D720S-070-NA5.0 (128)4.3 (108)6.2 (155.5)3.3 (1.5)S310FR-D720S-100-NA5.9 (150)5.5 (140)5.7 (145)4.4 (2.0)S3-Phase 200 240VAC Input & Output1/80.8FR-D720-008-NA5.0 (128)2.7 (68)3.2 (80.5)1.1 (0.5)S1/41.4FR-D720-014-NA5.0 (128)2.7 (68)3.2 (80.5)1.1 (0.5)S1/22.5FR-D720-025-NA5.0 (128)2.7 (68)4.5 (112.5)1.8 (0.8)S14.2FR-D720-042-NA5.0 (128)2.7 (68)5.3 (132.5)2.2 (1.0)S27FR-D720-070-NA5.0 (128)4.3 (108)5.4 (135.5)3.1 (1.4)S310FR-D720-100-NA5.0 (128)4.3 (108)5.4 (135.5)3.1 (1.4)S516.5FR-D720-165-NA5.0 (128)6.7 (170)5.6 (142.5)4.0 (1.8)S7 1/223.8FR-D720-238-NA5.9 (150)8.7 (220)6.1 (155)8.0 (3.6)S1031.8FR-D720-318-NA5.9 (150)8.7 (220)6.1 (155)8.0 (3.6)S3-Phase 380 480VAC Input & Output1/21.2FR-D740-012-NA5.0 (128)4.3 (108)5.1 (129.5)2.9 (1.3)S12.2FR-D740-022-NA5.0 (128)4.3 (108)5.1 (129.5)2.9 (1.3)S23.6FR-D740-036-NA5.0 (128)4.3 (108)5.4 (135.5)3.1 (1.4)S35FR-D740-050-NA5.0 (128)4.3 (108)6.2 (155.5)3.3 (1.5)S58FR-D740-080-NA5.0 (128)4.3 (108)6.6 (165.5)3.3 (1.5)S7 1/212FR-D740-120-NA5.9 (150)8.7 (220)6.1 (155)7.3 (3.3)S1016FR-D740-160-NA5.9 (150)8.7 (220)6.1 (155)7.3 (3.3)SMitsubishi Electric Automation Variable Frequency Drives 403
Soft-PWM control/high carrier frequency PWM control (V/F control, General-purpose magnetic flux vector control, Optimum excitationcontrol can be selected)Control MethodOutput Frequency RangeControl SpecificationsFrequency SettingResolutionFrequencyAccuracy0.06Hz/60Hz (terminal2, 4: 0 to 10V/10bit) 0.12Hz/60Hz (terminal2, 4: 0 to 5V/9bit) 0.06Hz/60Hz (terminal4: 0 to 20mA/10bit)Digital Input0.01HzAnalog InputWithin 1% of the max. output frequency (25 C 10 C)Digital InputWithin 0.01% of the set output frequencyBase frequency can be set from 0 to 400Hz. Constant torque/variable torque pattern can be selectedStarting Torque150% or more (at 1Hz) when General-purpose magnetic flux vector control and slip compensation is setTorque BoostManual torque boostAccel. /Decel. Time Setting0.01 to 3600s (acceleration and deceleration can be set individually), linear or S-pattern acceleration/deceleration mode can be selected.FR-D720-008 and 014, FR-D720S-008 and 014, FR-D710W-008 and 014 . 150%, FR-D720-025 and 042, FR-D740-012 and 022,FR-D720S-025 and 042, FR-D710W-025 and 042 . 100%, FR-D720-070, FR-D740-036, FR-D720S-070 . 50%, FR-D720-100 ormore, FR-D740-050 or more, FR-D720S-100 . 20%Regeneration(*1)DC InjectionBrakeStall Prevention Operation LevelFrequency SettingSignalDigital InputEntered from operation panel and parameter unit. Frequency setting increments is selectable.Forward and reverse rotation or start signal automatic self-holding input (3-wire input) can be selected.Operational FunctionsOutput SignalOperation SpecificationsOperation current level can be set (0 to 200% adjustable), whether to use the function or not can be selectedAnalog InputInput SignalOutput SignalPointsOperation frequency (0 to 120Hz), operation time (0 to 10s), operation voltage (0 to 30%) variableTwo pointsTerminal 2: 0 to 10V, 0 to 5V can be selectedTerminal 4: 0 to 10V, 0 to 5V, 4 to 20mA can be selectedStart SignalOpen CollectorOutputRelay OutputFive points. You can select from among multi-speed selection, remote setting, second function selection, terminal 4 input selection,JOG operation selection, PID control valid terminal, external thermal input, PU-external operation switchover, V/F switchover, outputstop, start self-holding selection, forward rotation, reverse rotation command, inverter reset, PU-NET operation switchover, externalNET operation switchover, command source switchover, inverter operation enable signal, and PU operation external interlockMaximum/minimum frequency setting, frequency jump operation, external thermal relay input selection, automatic restart afterinstantaneous power failure operation, forward/reverse rotation prevention, remote setting, second function, multi-speed operation,regeneration avoidance, slip compensation, operation mode selection, offline auto tuning function, PID control, computer linkoperation (RS-485), Optimum excitation control, power failure stop, speed smoothing control, Modbus-RTUOne pointOne pointOperating StatusYou can select from among inverter operation, up-to-frequency, overload alarm, output frequency detection, regenerative brakeprealarm, electronic thermal relay function prealarm, inverter operation ready, output current detection, zero current detection, PIDlower limit, PID upper limit, PID forward/reverse rotation output, fan alarm (*3), heatsink overheat pre-alarm, deceleration at aninstantaneous power failure, PID control activated, PID output interruption, during retry, life alarm, current average value monitor,remote output, alarm output, fault output, fault output 3, and maintenance timer alarmFor MeterOutput Points0 to 10VDC: one pointAnalog OutputYou can select from among output frequency, output current (steady), output voltage, frequency setting, converter output voltage,regenerative brake duty, electronic thermal relay function load factor, output current peak value, converter output voltage peak value,reference voltage output, motor load factor, PID set point, PID measured value, output power, PID deviation, motor thermal loadfactor, inverter thermal load factor 0 to 10VDCFor MeterIndication0.2 to 400HzAnalog InputVoltage/Frequency CharacteristicsBraking TorqueOperation PanelParameter Unit(FR-PU07)Additional DisplayBy The ParameterUnit (FR-PU04/FR-PU07) OnlyOperating StatusYou can select from among output frequency, output current (steady), output voltage, frequency setting, cumulative energization time,actual operation time, converter output voltage, regenerative brake duty, electronic thermal relay function load factor, output currentpeak value, converter output voltage peak value, motor load factor, PID set point, PID measured value, PID deviation, inverter I/Oterminal monitor, output power, cumulative power, motor thermal load factor, inverter thermal load factor, PTC thermistor resistance.Fault DefinitionFault definition is displayed when the fault occurs and the past 8 fault definitions (output voltage/current/frequency/cumulativeenergization time right before the fault occurs) are storedOperating Status Not usedFault DefinitionInteractiveGuidanceOutput voltage/current/frequency/cumulative energization time immediately before the fault occursFunction (help) for operation guideSurrounding Air TemperatureOvercurrent during acceleration, overcurrent during constant speed, overcurrent during deceleration, overvoltage during acceleration,overvoltage during constant speed, overvoltage during deceleration, inverter protection thermal operation, motor protection thermaloperation, heatsink overheat, input phase loss (*5, *6), output side earth (ground) fault overcurrent at start (*5), output phase loss,external thermal relay operation (*5), PTC thermistor operation (*5), parameter error, PU disconnection, retry count excess (*5), CPUfault, brake transistor alarm, inrush resistance overheat, analog input error, stall prevention operation, output current detection valueexceeded (*5), safety circuit faultFan alarm (*3), overcurrent stall prevention, overvoltage stall prevention, PU stop, parameter write error, regenerative brake prealarm(*5), electronic thermal relay function prealarm, maintenance output (*5), undervoltage, operation panel lock, password locked,inverter reset, safety stop-10 C to 50 C (14 F to 122 F) (non-freezing) (*4)Ambient Humidity90%RH maximum (non-condensing)Storage Temperature (*2)-20 C to 65 C (-4 F to 149 F)AtmosphereIndoors (without corrosive gas, flammable gas, oil mist, dust and dirt, etc.)Altitude/VibrationMaximum 1000m (3280.80 feet) above sea level, 5.9m/s2 or less at 10 to 55Hz (directions of X, Y, Z axes)Protective FunctionsWarning FunctionsEnvironment VARIABLE FREQUENCY DRIVESD700 General SpecificationsNotes:1. The braking torque indicated is a short-duration average torque (which varies with motor loss) when the motor alone is decelerated from 60Hz in the shortest time and is not a continuous regenerativetorque. When the motor is decelerated from the frequency higher than the base frequency, the average deceleration torque will reduce. Since the inverter does not contain a brake resistor, use theoptional brake resistor when regenerative energy is large. A brake unit (FR-BU2) may also be used.2. Temperatures applicable for a short time, e.g. in transit.3. As the FR-D720-042 or less, FR-D740-022 or less, FR-D720S-042 or less, FR-D710W-042 or less are not provided with the cooling fan, this alarm does not function.4. When using the inverters at the surrounding air temperature of 40 C (104 F) or less, the inverters can be installed closely attached (0cm clearance).5. This protective function does not function in the initial status.6. This protective function is available with the three-phase power input specification model only.404
D700 Series Terminal Connection Diagram*1. DC reactor (FR-HEL)When connecting a DC reactor, remove thejumper across P1-P/ Single-phase 100V power input model is notcompatible with DC reactor.Sink logicMain circuit terminalControl circuit terminalSingle-phase power inputMCCBBrake unit(Option)MCSingle-phaseAC powersupplyR/L1S/L2*1*8PR N/*7P/ JumperMCCBP1*6MCR/L1S/L2T/L3Three-phaseAC powersupply*7 A brake transistor is not built-in to theFR-D720-008, 014 and FR-D720S-008,014 and FR-D710W-008, 014.*8 Brake resistor (FR-ABR, MRS type, MYStype)Install a thermal relay to prevent anoverheat and burnout of the brake resistor.(The brake resistor can not be connectedto the FR-D720-008, 014 and FR-D720S008, 014 and FR-D710W-008, 014.)REarth(Ground)*6 Terminal P1 is not available for singlephase 100V power input model.UInrush currentlimit circuitMotorVWIMMain circuitEarth(Ground)Earth (Ground)Control circuitshort across terminalsPC-SD.Contact input common24VDC power supplyRelay outputCSTFBSTRRelay output(Fault output)ARHRMSDRUNSINKRLTerminal functions varyby Pr. 192 A,B,C terminalfunction selectionOpen collector outputSOURCEControl input signals (No voltage input allowed)ForwardTerminal functions vary rotation startwith the input terminal Reverseassignment (Pr. 178 to rotation startPr. 182)HighspeedMulti-speed selection Middlespeed*2 When using terminals PCLowSD as a 24VDC powerspeedsupply, take care not toRunningTerminal functions vary byPr. 190 RUN terminal functionselection24VOpen collector output commonSink/source commonSEPC *2(Common for external power supply transistor)Frequency setting signals (Analog)*3 Terminal input specificationscan be changed by analoginput specificationsswitchover (Pr. 73).Terminal 10 and terminal 2are used as PTC inputterminal (Pr. 561).*4 Terminal inputspecifications can bechanged by analog inputspecifications switchover(Pr. 267). Set thevoltage/current inputswitch in the "V" positionto select voltage input (0to 5V/0 to10V) and "I"(initial value) to selectcurrent input (4 to 20mA).3Frequencysettingpotentiometer1/2W1kΩ*5110( 5V)2 0 to 5VDC *3(0 to 10VDC)2AM( )5(-)5(Analog common)Terminal 4( )input(Current (-)input)4 4 to 20mADC0 to 5VDC0 to 10VDC *4VAnalog signal output(0 to 10VDC)PUconnectorIVoltage/currentinput switch *4*5 It is recommended to use 2W1kΩwhen the frequency setting signalis changed frequently.Safety stop signalOutput shutoff (Line 1)Output shutoff (Line 2)Common terminalShortingwireSOS1S2SCOutput shutoffcircuitFormanufacturersettingSafetymonitor output*8*8 Common terminal ofterminal SO is terminal SC.(Connected to terminal SDinside of the inverter.)Terminal Block LayoutRecommended wire size:0.3mm² 0.75mm²Mitsubishi Electric Automation Variable Frequency Drives 405
Model NumberDescriptionFR-PU07Alpha-Numeric multi-language keypadNotesStocked ItemSFR-PA07Panel mount basic keypadSFR-CONFIGURATORProgramming and diagnostic softwareSSC-FRPCSerial communications cableFR-CB201Remote cable for connecting keypad1 meter cableSFR-CB203Remote cable for connecting keypad3 meter cableSFR-CB205Remote cable for connecting keypad5 meter cableSFR-ABR- KExternal braking resistorSFR-RJ45-HUB4Serial Network Hub - 2 Stations-FR-RJ45-HUB10Serial Network Hub - 8 Stations-FR-RJ45-TRTerminating Resistor for FR-RJ45-HUB-SNote: represents KW rating.FR-BIF58 (2.3)44 (1.8)42 (1.7)SFR-BIF-H458 (2.3)44 (1.8)42 (1.7)-208 - 230460Dimensions mm (in)LWDA1φd1Stocked ItemA1A2Glass-braided cable2.0mm2 whiteB2Kit ModelNumber500 200WW1 1W2LeakageCurrent(mA)4DriveVoltageBrake ResistorsB1Input Radio Noise FilterThis filter is connected to the input of the drive and helps to reduceradiated noise in the radio frequencies.5.3φd2DHA2Line Noise FilterProvides a toroid for line noise reduction.2.5 VARIABLE FREQUENCY DRIVESD700 Series OptionsBrake Resistor ModelDimensions mm (in)Drive HpKit ModelNumberLWD0.5 - 5FR-BSF01110 (4.33)22.5 (0.89)65 (2.56)S0.5 - 75FR-BLF180 (7.07)31.5 (1.24)83 (3.27)SStocked ItemD700 EMC FiltersThis attachment allows the VFD to be mounted onto the filter.Model NumberDrive ModelStocked ItemFFR-CS-050-14A-RF1D720S-008 to D720S-100-FFR-CSH-036-8A-RF1D740-012 to 036-FFRCSH-080-16A-RF1D740-050 to 080-FFRMSH-170-30A-RF1D740-120 to 160-DIN Rail Mounting AttachmentThis attachment allows the D700 Series inverter to mount on a 35mm DIN rail.Model NumberDrive scriptionIncludes E720 and D720 1HP, pre-wired digital inputswitches, led outputs and speed potentiometerIncludes 1/2HP motor with quick connection 00100212121263333405050Notes:1. For the 15K, connect the two supplied resistors (18 ohms) in parallel2. For the H15K, connect the two supplied resistors (18 ohms) in series.Stocked ItemD700 Conduit KitsD700 Demonstration UnitModel Number200V FR-ABR-5.5KFR-ABR-7.5KFR-ABR-11KFR-ABR-15K (*1)400V KFR-ABR-H15K (*2)Dimensions (mm)WW1W2Stocked ItemSSKit ModelNumberPart NumberStockedFR-D710W- FR-D720S- FR-D720- FR-D740- ItemFR-E7FN-01 008/014008/014008/014-SFR-E7FN-02 --025-SFR-E7FN-03 --042-SFR-E7FN-04 --070/100036SFR-E7FN-06 ----SFR-E7FN-07 --165-SFR-E7FN-08 --238/318120/160SFR-E7FN-11 ---012/022-FR-E7FN-12 ---050/080-
Mitsubishi Electric Automation Variable Frequency Drives 403 t Simple to Use: The D700 is perfect for a wide range . (FR-PU07) Operating Status You can select from among output frequency, output current (steady), output
Seals 9.003 444 4.008 228 4.001 564 GC PAL 4.008 198 9.003 451 9.003 446 4.001 521 7.050 759 4,008 218 4.008 215 4,008 218 4.008 215 Crimp Neck ND 8 C T C Art. rNo. Screw Neck ND9 C T C Art. rNo. Crimp Neck ND11 C T
Roaster with Rack 008-07599 Covered Cake Pan 008-07598 Springform Pan 008-07597 KENMORE 10-PC. STAINLESS STEEL WITH COPPER BAND COOKWARE SET 008-09581 KENMORE ELITE 10-PC. HARD-ANODIZED COOKWARE SET 008-09590 24 25
Other protozoal intestinal diseases (007) Balantidiasis (007.0) Giardiasis (007.1) Coccidiosis (007.2) Intestinal trichomoniasis (007.3) Other protozoal intestinal diseases (007.8) Unspecified (007.9) Intestinal infections due to other organisms (008) Escherichia coli (008.0) Arizona (008.1) Aerobacter aerogenes (008.2)
Other protozoal intestinal diseases (007) Balantidiasis (007.0) Giardiasis (007.1) Coccidiosis (007.2) Intestinal trichomoniasis (007.3) Other protozoal intestinal diseases (007.8) Unspecified (007.9) Intestinal infections due to other organisms (008) Escherichia coli (008.0) Arizona (008.1) Aerobacter aerogenes (008.2)
round ISO 10664 4039 015 0602 7 11,9 metrical M 6 10 – 4030 007 0006 7 11,9 metrical M 6 9 – 4039 007 0604 8 9,9 metrical M 6 9 – 4039 008 0016 8 18 metrical M 6 14 – 4039 008 0045 8 26,2 metrical M 6 8 – 4039 008 0041 8 30,8 metrical M 6 16 – 4039 008 0047 8 4
Compatibility Designed for use with Transmille 3000 Series calibrators and ProCal Software 2 Turn Coil Accuracy (Input 0 to 30A : Freq. DC - 30Hz to 60Hz : Effective Output 0 to 60A) 90 Day Rel. 180 Day Rel. 1 Year Rel. 2 Year Rel. % A % A % A % A Effective accuracy - Coil only (wound clamps) 0.35 0.008 0.35 0.008 0.35 0.008 0.35 0.008
DOCUMENT RESUME. Donovan, Dorothy J. Voter Education. A Resource Manual for Teachers and Students. Institute for Political/Legal Education, Pitman, SO 008 536. N.J. Mar /5. 120p4; Relate documents are SO 008 534, 535, and. 537. Institute for Political and Legal Education, Box 426, Glassbo
us88685734 agma 1003-g 1993 us88685738 agma 2008-b 1990 us88685800 agma 6004-f 1988 us88685801 agma 6017-e 1986 us88685804 agma 6033-b 1998 us88685818 agma 9001-a 1986 de88686927 tgl 18790/03 1972-09 us88687103 a-a-20079 1984-04-16 us88687140 a-a-1953 1982-08-31 us88687157 a-a-1669 1982-10-18 us88687212 a-a-55063 1992-08-13 us88687305 a-a-59606 2002-08-23 us88687309 a-a-59606/2 2002-08-23 .
