SOP D2 Phaser XRD - Chemistry

2y ago
4 Views
1 Downloads
680.98 KB
8 Pages
Last View : 1m ago
Last Download : 3m ago
Upload by : Roy Essex
Transcription

LUMIGEN INSTRUMENT CENTER X-RAY CRYSTALLOGRAPHYICLABORATORY: WAYNE STATE UNIVERSITYStandard Operating Procedure for the Bruker D2 Phaser X-RayDiffractometerContact Manager:Dr. Cassie Wardward@wayne.eduOffice room 061 Chemistry(313) 577-2587Dr. Sameera Pererafp4261@wayne.eduOffice room 135 ChemistryLocationLumigen Instrument Center X-Ray Crystallographic LaboratoryDepartment of ChemistryWayne State University 050.1 Chemistry Building5101 Cass AvenueDetroit, MI 48202LIC Lab: (313) 577-0518Safety Requirements for the X-ray Crystallographic LaboratoryAccess to the lab will be revoked if you do not follow these safety procedures.1. While working in the X-Ray Crystallographic Laboratory, researchers are alwaysrequired to wear Personal Protective Equipment (PPE). The appropriate PPE includedosimetry ring, safety glasses, long pants/skirt covering the legs completely, closed-toeshoes, and gloves. Do not wear gloves while using the computer keyboard or mouse. Allrequired PPE needs to be supplied by the user. Dosimetry rings must not be removedfrom the lab.2. Food and beverages cannot enter the lab. Never eat or drink inside the lab.3. Please keep the area around the instruments and prep stations clean. If you use the lab’ssample holders, clean them after use. Properly dispose glass waste in the appropriatecontainer. All samples must be properly disposed of in your research lab.4. Following a spill, please clean it up with a paper towel or broom. If you are unsure howto clean up the spill, contact the lab manager (Dr. Ward) or the LIC Director (Dr.Westrick). If the spill occurs after hours with personal injury, please contact WSU policedepartment (7-2222) and Dr. Westrick, immediately. If samples come in contact with theeyes, use the emergency eye wash station. Turn on the cold water on high and pull theknob to the eye wash. Run water to the eyes for 15 minutes.5. The Standard Operating Procedures (SOPs) are next to the instruments. The users are tofollow what is written in these procedures.6. You must log the usage time into the appropriate instrument logbook.7. All researchers working in LIC must complete the EH&S initial course for LaboratorySafety Training and Radiation (X-ray) Generating Machine training and show proof ofcompletion. Users whose safety training has expired will not be permitted access to thelaboratory.8. Users must also sign the Wayne State University Laboratory Specific Training Form(Appendix L).9. In case of an instrument malfunction, turn off the instrument and contact Dr. WardWardUpdated: 2020 March 6Page 1 of 8

LUMIGEN INSTRUMENT CENTER X-RAY CRYSTALLOGRAPHYICLABORATORY: WAYNE STATE UNIVERSITYimmediately.10. Be aware that the X-Ray Crystallography Laboratory has a red binder containing theChemical and Laboratory Safety Information. It is located on the second shelf above thedosimetry rings cabinet. This contains the Department of Licensing and RegulatoryAffairs Radiation Safety Section Ionizing Radiation Rules.Additional Safety Requirements for the D2 Phaser powder XRD1. In case of an instrument malfunction, turn off the instrument using the switch in the back(Figure 1). Contact Dr. Ward immediately, or the WSU police (313-577-2222) ifoccurrence is after hours.Figure 1: For emergency shut down, turn off the switch in the back of the D2 Phaser as shown inthe picture.Training and Usage RequirementsBefore Training:1. All users must pass the online EH&S Laboratory Safety Training and Radiation (X-ray)Generating Machine training (https://about.citiprogram.org/en/homepage/). Print thecertificate after completing the quiz and bring it to Dr. Ward. The two safety trainingsmust be completed every Janurary and the printed certificate must be brought to Dr.Ward.2. A dosimetry form must also be filled out st-form.pdf) and signed by Dr. Westrick. Bring the signed form to Dr. Ward.3. You must have an Infinity account and have requested access to the Lumigen X-rayLaboratory. You must also have

Standard Operating Procedure for the Bruker D2 Phaser X-Ray Diffractometer Contact Manager: Dr. Cassie Ward Dr. Sameera Perera ward@wayne.edu fp4261@wayne.edu Office room 061 Ch

Related Documents:

Xerox Phaser 1235 . IBM InfoPrint 1145L MFP : Xerox Phaser 2135DT . IBM InfoPrint Color 8 : Xerox Phaser 3400 . IBM LaserPrinter 4039 : Xerox Phaser 3450 . IBM Network Printer 12 : Xerox Phaser 3500 . IBN Network Printer 17 : Xerox Phaser 4500DX . Konica KL-3015 : Xerox Phaser 5400 . Kyocera FS-C50 16N :

SOP-HR-020: Professional Development and Training SOP-HR-021: Disciplinary Proceedings SOP-HR-022: Retention and Exit Policy SOP-HR-023: Transfer Policy SOP-HR-024: Travel Reimbursement Policy SOP-HR-025: Rewards and Recognition SOP-HR-026: Employee Suggestion Scheme SOP-HR-027: IT, Internet, Email and Social Media Policy .File Size: 371KB

43 Bagian 3 – PENYUSUNAN STANDAR OPERASIONAL PROSEDUR 43 Prinsip-Prinsip Penyusunan SOP 44 Tahapan Penyusunan SOP 1. Persiapan Penyusunan SOP 2. Penilaian Kebutuhan SOP 3. Pengembangan SOP 4. Penerapan SOP dalam Manajemen 5. Monitoring dan Evaluasi Penerapan SOP 45 47 52 58 58 60 Bagian 4 - IMPLEMENTASI STANDAR OPERASIONAL PROSEDUR 60 .

Phaser 8510/8560MFP Multifunction Product 1-2 Parts of the System This section includes: Front View on page 1-2 Side View on page 1-3 Back View on page 1-3 Open View on page 1-4 Front View Phaser 8510MFP/D Product and All Phaser 8560MFP Products Phaser 8510MFP/N Product 1. Tray 4 (optiona

PHASER 8560 EVALUATOR GUIDE 1 SECTION 1 Introducing the Xerox Phaser 8560 Solid Ink Color Printer PRODUCT OVERVIEW The Xerox Phaser 8560 solid ink color printer is a high-performance color printer based on Xerox-exclusive solid ink technology. It is designed for busy workgroups in both small and large companies. The Phaser 8560 delivers

CSSD FORUM STANDARD OPERATING PROCEDURE Denise Sheard STERILE SERVICE DEPARTMENT Contents SOP No 1. Safety Awareness in Sterile Service Department SOP No 2. Department Cleaning Procedure SOP No 3. Departmental Dress Code SOP No 4. Collection of Soiled/Contaminated Equipment SOP No 5. Manual Decontamination of Medical Devices SOP No 6.

a. This SOP is effective beginning October 1, 2010. b. This SOP is supplemented by SOP 51 00 "On-Site Lender Reviews and Examinations" which details SBA standard operating procedures for on-site reviews and examinations for 7(a) lenders and CDCs. 3. Authority The following statutory and regulatory citations provide authority for this SOP:

Agile Development and Scrum Scrum is, as the reader supposedly knows, an agile method. The agile family of development methods evolved from the old and well- known iterative and incremental life-cycle approaches. They were born out of a belief that an approach more grounded in human reality – and the product development reality of learning, innovation, and change – would yield better .